| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
coredump: hold RCU while releasing parked threads
coredump_finish() releases the parked threads by clearing ->task in
their core_thread entry and calling wake_up_process() on each of them.
It does that without holding a reference on the task and without being
inside rcu.
But calling wake_up_process(task) without rcu here isn't safe. A parked
thread doesn't need that wakeup to leave. A spurious wakeup or a
preemption after the store is enough for the task to go away.
So if the coredump client is preempted between the store and
wake_up_process() the thread can exit and be freed in the meantime and
try_to_wake_up() takes pi_lock in freed memory.
Hold rcu across the loop. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Initialize modname and offset in print_rec()
print_rec() leaves 'modname' and 'offset' uninitialized and
kallsyms_lookup() only sets them on success. When the lookup fails like
when a module is being loaded or unloaded, 'modname' holds a garbage
value, passes the 'if (modname)' check, and is dereferenced by
seq_printf().
Oops: general protection fault
RIP: 0010:string+0x48/0xe0
Call Trace:
vsnprintf+0x1f5/0x650
seq_printf+0x8e/0xb0
print_rec+0x6c/0xc0
t_show+0x4c/0x440
seq_read_iter+0x119/0x480
This can be triggered by reading available_filter_functions while a
module is being loaded or unloaded.
Initialize both variables so a failed lookup skips the module name. |
| In the Linux kernel, the following vulnerability has been resolved:
keys/trusted_keys: return immediately after TPM unseal failure
trusted_tpm_unseal() proceeds to pcrlock() when the TPM unseal operation
fails. If pcrlock() succeeds, its return value overwrites the unseal error,
causing key instantiation to succeed.
Return immediately when unseal fails to preserve the original error. |
| In the Linux kernel, the following vulnerability has been resolved:
keys: make keyring indexes independent of kernel addresses
KEYCTL_READ returns the serial numbers in a keyring in associative-array
traversal order. The first word of the index is a public, deterministic
hash of the type pointer, domain pointer and description. An unprivileged
user can therefore insert keys with known descriptions, predict their
order for each possible KASLR slide, and recover the kernel image address.
On an x86-64 build with 16 MiB alignment, 45 user keys suffice to
distinguish the candidate slides.
Remove the addresses from the whole index, not just its first hash word.
Assign each key type and domain a nonzero 64-bit ID and hash those IDs and
the description with a once-initialized SipHash key. Use the full IDs in
the later index chunks as well. Truncating or hashing the IDs there would
lose the guarantee that distinct type/domain/description tuples have a
differing index bit.
Allocate IDs lazily since private key types need not be registered. Cache
them in the index key so tree walks and copies of an existing index do not
need to dereference a type descriptor that may have been unregistered.
Keep the 32-bit chunk layout and diff_objects() bit offsets consistent,
and retain the separate root slot for keyrings used by recursive search.
The key comparison, permissions and userspace data format are unchanged;
only the address-dependent in-memory ordering is replaced. |
| In the Linux kernel, the following vulnerability has been resolved:
keys: Avoid the owner account dereference in named keyring lookup
Named keyring lookup must keep the storage containing the owner UID
alive through the namespace mapping check. find_keyring_by_name()
reads keyring->user->uid under keyring_name_lock, but that lock protects
the keyring's name entry and allocation, not its separate key_user.
A named session-keyring join can overlap a privileged KEYCTL_CHOWN on
another CPU. If the keyring holds the last reference to its old dynamic
key_user and the ownership transfer succeeds, the following ordering is
possible:
Named join Chown
find_keyring_by_name() keyctl_chown_key()
read_lock(keyring_name_lock) down_write(key->sem)
load old keyring->user
replace key->user and key->uid
up_write(key->sem)
key_put(key)
key_user_put(old user): free
read old user->uid
read_unlock(keyring_name_lock)
Chown neither takes keyring_name_lock nor key_session_mutex, so it can
free the old account between the pointer load and the UID read. The
lookup then reads freed memory even though the keyring itself is alive.
Use keyring->uid for the mapping check. key_alloc() initializes this
inline owner UID and keyctl_chown_key() updates it on chown.
The existing name lock keeps its containing keyring allocated throughout
the check, so lookup no longer depends on the account's lifetime. This
also matches the owner UID used by the permission check.
KASAN report as below:
BUG: KASAN: slab-use-after-free in find_keyring_by_name+0x577/0x5d0
Read of size 4 at addr ffff8881128ae2ec by task keycase/500 |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: protect node reset trace dump with node lock
The tipc_node_reset_links trace event asks tipc_node_dump() to walk the
node's link entries. Unlike the other node events that request link data,
this event runs without the node lock.
This permits bearer teardown to free a link while the trace callback is
dumping it:
CPU 0 CPU 1
trace_tipc_node_reset_links()
tipc_node_dump()
l = n->links[0].link
tipc_node_write_lock()
kfree(l)
n->links[0].link = NULL
tipc_node_write_unlock()
tipc_link_dump(l)
tipc_link_dump() then dereferences the stale pointer. KASAN reported:
BUG: KASAN: slab-use-after-free in tipc_link_dump
Read of size 4 by task poc/115
Call Trace:
tipc_link_dump+0x10cb/0x16b0
tipc_node_dump+0x4bb/0x740
trace_event_raw_event_tipc_node_class+0x258/0x360
tipc_node_reset_links+0x14d/0x1a0
tipc_rcv+0x13f5/0x3030
tipc_udp_recv+0x4e3/0x670
Allocated by task 0:
tipc_link_create+0x1e1/0x1020
tipc_node_check_dest+0x7d2/0x11a0
tipc_disc_rcv+0xdbf/0x1430
Freed by task 89:
kfree+0x131/0x3c0
tipc_node_link_down+0x267/0x4b0
tipc_node_delete_links+0xec/0x160
bearer_disable+0x107/0x260
Take the node write lock around the trace event. This serializes the
dump against tipc_node_link_down(delete=true), which frees the link
under the same write lock. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Fix potential UAF in reqsk_timer_handler().
When TCP socket migration fails at inet_ehash_insert() in
reqsk_timer_handler(), we jump to the no_ownership: label
and free the new reqsk immediately with __reqsk_free().
Thus, we must stop the new reqsk's timer before jumping to the
label, but the timer might be missed since the cited commit,
resulting in UAF.
As we are in the original reqsk's timer context, we can safely
call timer_delete_sync() for the new reqsk.
Let's pass false to __inet_csk_reqsk_queue_drop() to stop
the new reqsk's timer. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: don't retry recv on uncommitted buffers
Commit 41b70df5b38b ("io_uring/net: commit partial buffers on retry")
commits ring provided buffers when a receive is going to be retried after
a partial transfer, so that another request using the same buffer group
can't be handed the memory the first one keeps receiving into. It commits
the number of bytes received so far. That does the job for a single
buffer which is consumed as a whole, but the request hangs on to all it
has mapped:
- For a buffer ring with IOU_PBUF_RING_INC only these bytes are consumed.
The rest of the buffer stays at the head of the ring.
- For a bundle only the buffers which hold these bytes are consumed, the
others that were peeked stay in the ring.
In both cases the next receive with that buffer group gets memory that
the retried request is still going to write to, and whoever comes last
overwrites the data of the other. What the retry fills isn't committed at
all, as the buffer list isn't known any more at that point. So the kernel
hands it out again later on, while the CQE tells the application that it
was used, and for an incremental buffer that it is done with.
The remainder can't be committed in advance: if the request ends up
receiving less, there is no way to tell the application that more was
consumed than the CQE accounts for. Complete the request with what it has
got instead of retrying it. MSG_WAITALL is no longer honoured for
receives into incremental buffers or multi buffer bundles, they can
return a short count, with the request marked as failed like for other
short MSG_WAITALL transfers. |
| IBM InfoSphere Information Server 11.7 vulnerable to SQL injection. A remote attacker could send specially crafted SQL statements, which could allow the attacker to view, add, modify, or delete information in the back-end database. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf: heaps: Fix off-by-one in CMA heap fault handler
Until VM_DONTEXPAND was added in commit 1c1914d6e8c6 ("dma-buf: heaps:
Don't track CMA dma-buf pages under RssFile") it was possible to obtain
a mapping larger than the buffer size via mremap and bypass the overflow
check in dma_buf_mmap_internal. When using such a mapping to attempt to
fault past the end of the buffer, the CMA heap fault handler also checks
the fault offset against the buffer size, but gets the boundary wrong by
1. Fix the boundary check so that we don't read off the end of the pages
array and insert an arbitrary page in the mapping. |
| Use after free in Canvas in Google Chrome on Linux, ChromeOS prior to 147.0.7727.138 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: Critical) |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Fix garbage collector racing against connect()
Garbage collector does not take into account the risk of embryo getting
enqueued during the garbage collection. If such embryo has a peer that
carries SCM_RIGHTS, two consecutive passes of scan_children() may see a
different set of children. Leading to an incorrectly elevated inflight
count, and then a dangling pointer within the gc_inflight_list.
sockets are AF_UNIX/SOCK_STREAM
S is an unconnected socket
L is a listening in-flight socket bound to addr, not in fdtable
V's fd will be passed via sendmsg(), gets inflight count bumped
connect(S, addr) sendmsg(S, [V]); close(V) __unix_gc()
---------------- ------------------------- -----------
NS = unix_create1()
skb1 = sock_wmalloc(NS)
L = unix_find_other(addr)
unix_state_lock(L)
unix_peer(S) = NS
// V count=1 inflight=0
NS = unix_peer(S)
skb2 = sock_alloc()
skb_queue_tail(NS, skb2[V])
// V became in-flight
// V count=2 inflight=1
close(V)
// V count=1 inflight=1
// GC candidate condition met
for u in gc_inflight_list:
if (total_refs == inflight_refs)
add u to gc_candidates
// gc_candidates={L, V}
for u in gc_candidates:
scan_children(u, dec_inflight)
// embryo (skb1) was not
// reachable from L yet, so V's
// inflight remains unchanged
__skb_queue_tail(L, skb1)
unix_state_unlock(L)
for u in gc_candidates:
if (u.inflight)
scan_children(u, inc_inflight_move_tail)
// V count=1 inflight=2 (!)
If there is a GC-candidate listening socket, lock/unlock its state. This
makes GC wait until the end of any ongoing connect() to that socket. After
flipping the lock, a possibly SCM-laden embryo is already enqueued. And if
there is another embryo coming, it can not possibly carry SCM_RIGHTS. At
this point, unix_inflight() can not happen because unix_gc_lock is already
taken. Inflight graph remains unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Wait for SCX_OPSS_DISPATCHING before moving tasks off DSQs
A task can be found on a non-local DSQ while the CPU which dispatched it
is still running ops.dequeue() and hasn't cleared SCX_OPSS_DISPATCHING.
The DSQ consume and move paths don't wait for the dispatch to finish and
can operate on the task concurrently with the dispatcher.
Call scx_wait_dispatching() in scx_move_local_task_to_local_dsq(),
unlink_dsq_and_switch_rq_lock() and move_task_between_dsqs() before they
operate on the task. In scx_move_local_task_to_local_dsq(), wait before
scx_resolve_local_dsq() as it may update p->scx.flags. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/waitid: prevent cancel reference wrap
io_waitid packs the cancellation state into bit 31 of ->refs and uses
bits 30:0 as a 31-bit reference counter:
#define IO_WAITID_CANCEL_FLAG BIT(31)
#define IO_WAITID_REF_MASK GENMASK(30, 0)
__io_waitid_cancel() marks a request canceled, then increments the low
bits of ->refs to claim completion ownership. When another path owns the
request, the increment remains even though cancellation returns false.
The request remains discoverable by cancellation, so repeated failed
attempts can wrap the 31-bit reference field to zero. A later
cancellation can claim ownership and complete the request a second time.
Use atomic_fetch_or() when setting the cancel flag and inspect the old
flag value. The first cancel attempt continues to the existing ownership
increment, preserving its wake and issuer handoff semantics. Later
attempts see the cancel flag and return without incrementing the
reference field.
This makes repeated failed cancellation attempts idempotent while
leaving the first-cancel state transitions unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
keys: Check the authorization payload in process keyring searches
An authorization payload and its saved credentials must remain valid
while search_process_keyrings_rcu() searches the requestor's keyrings.
The function validates the authorization key, then separately loads
payload.data[0] and unconditionally reads rka->cred. Validation does
not prevent request_key_auth_revoke() from clearing the payload.
A request-key helper can assume authority and fork a descendant that
inherits the authorization key. If the descendant misses in its own
keyrings, it falls back to the saved requestor credentials. Successful
target instantiation invalidates the authorization key without clearing
the payload. After the helper exits, UMH_WAIT_PROC returns to the
requester, which calls complete_request_key() and revokes that key.
With the descendant paused after validation, the paths can interleave
as follows:
1. The descendant enters search_process_keyrings_rcu() under RCU and
key_validate() succeeds.
2. The helper instantiates the target, invalidates the authorization
key, and exits.
3. The requester resumes from UMH_WAIT_PROC, calls
complete_request_key(), and revokes the authorization key.
request_key_auth_revoke() sets its payload pointer to NULL.
4. The descendant loads NULL and dereferences rka->cred.
This NULL dereference can oops the kernel. RCU delays payload disposal
but does not prevent the pointer from being cleared.
Load the payload with dereference_key_rcu() and require a non-NULL
result before validating the authorization key and searching its saved
credentials. A non-NULL payload and its credentials remain alive for
the caller's RCU read-side section; a cleared payload skips the fallback
search and follows the existing error selection.
KASAN report as below:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
RIP: 0010:search_process_keyrings_rcu+0x32b/0x790 |
| In the Linux kernel, the following vulnerability has been resolved:
keys: Protect the type name while describing a key
keyctl_describe_key() must keep the key type's name alive until
kasprintf() has consumed it. The retained key reference keeps the key
and its description alive, but does not pin the module providing its
type. The name is passed to kasprintf() without holding key->sem.
kvasprintf() uses the saved name pointer in two formatting passes, with
a GFP_KERNEL allocation between them. With AF_RXRPC=m, a task that
passes View permission before type retirement can overlap a privileged
module unload in this order:
1. KEYCTL_DESCRIBE looks up the key, saves key->type->name in the
kasprintf() arguments and completes the first formatting pass.
2. While the formatter is delayed before its second pass,
af_rxrpc_exit() calls unregister_key_type(), which removes the type
from the registry and waits for key_gc_keytype().
3. The collector takes key->sem for writing, retypes the retained key
to key_type_dead and completes retirement. Unregistration and module
exit return, allowing free_module() to release the type and name.
4. The formatter resumes its second pass and reads the saved name from
released module storage, which can fault in string().
Hold key->sem for reading across kasprintf(). The collector then cannot
retype the key or complete retirement until both formatting passes have
finished. If retirement wins the lock first, formatting uses the core
key_type_dead name instead. Release the semaphore immediately after
kasprintf(), including on allocation failure, before copying to
userspace.
Oops report as below:
BUG: unable to handle page fault for address: fffffbfff8054794
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
RIP: 0010:string+0x23f/0x470
Call Trace:
vsnprintf+0x330/0x1110 |
| In the Linux kernel, the following vulnerability has been resolved:
keys: Protect the read method check against type removal
keyctl_read_key() checks key->type->read without holding key->sem.
A reference keeps the key alive, but does not pin the module containing
its type. A surviving RxRPC key can therefore be read while AF_RXRPC
is being unloaded:
KEYCTL_READ task Module unload and key GC
---------------- ------------------------
lookup_user_key()
permission / possession checks
load key->type
af_rxrpc_exit()
unregister_key_type()
GC: down_write(key->sem)
GC: retype to key_type_dead
GC: up_write(key->sem)
unregister_key_type() returns
free_module()
read saved type's read member
The final access can read freed module storage. The read invocation in
__keyctl_read_key() is already protected by key->sem, but the earlier
method check is outside that critical section.
Move the method check into __keyctl_read_key(), after key_validate() and
under its existing read hold on key->sem. The check and invocation then
use the same protected type for length queries and every read retry.
The GC cannot retype the key until the semaphore is released, and type
unregistration waits for that GC pass before the module can be freed.
Return -EOPNOTSUPP when validation succeeds and the type has no read
method. A temporary buffer may now be allocated before this result;
allocation and copying to userspace remain outside the semaphore. |
| In the Linux kernel, the following vulnerability has been resolved:
asymmetric_keys: reject trust keys without IDs
The PKCS#8 parser deliberately leaves the asym_key_ids payload slot
empty. key_or_keyring_common() unconditionally dereferences that slot
when a PKCS#8 key is supplied to a key_or_keyring restriction. Both the
plain and :chain forms reach this branch, allowing an unprivileged caller
to trigger a NULL pointer dereference through KEYCTL_RESTRICT_KEYRING
followed by add_key().
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:key_or_keyring_common (crypto/asymmetric_keys/restrict.c:205 crypto/asymmetric_keys/restrict.c:279)
Call Trace:
<TASK>
__key_create_or_update (security/keys/key.c:884)
key_create_or_update (security/keys/key.c:1021)
__do_sys_add_key (security/keys/keyctl.c:134)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Kernel panic - not syncing: Fatal exception
Reject an asymmetric restriction key without key IDs. A PKCS#8 private
key cannot identify the signer of a candidate certificate and is not a
valid trust anchor. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: error damos_commit_quota_goal() for zero target_value
Patch series "mm/damon: move zero damos quota target_value handling to the
core layer".
Having zero DAMOS quota target value can cause division by zero. DAMON
API callers are checking the target value parameters to avoid that. It is
easy to make mistakes in some of the multiple API callers. Move that to
the core layer.
Patch 1 adds the corner case handling into the core layer DAMON parameters
validation logic. Patches 2 and 3 remove no more needed DAMON API callers
side handling of the corner case in DAMON_LRU_SORT and DMON_SAMPLIE_MTIER,
respectively.
This patch (of 3):
If a DAMOS scheme has a damos_quota_goal of zero target_value,
damos_quota_goal() could trigger division-by-zero error. Hence each DAMON
API callers should do the zero target_value validation. It is easy to
make mistakes. Actually such bugs in DAMON_LRU_SORT and
DAMON_SAMPLE_MTIER were found and fixed [1].
It is better to handle the corner case only once in the core layer,
instead of multiple places in all DAMON API callers. One straightforward
option is using an alternative denominator for the corner case in the
damos_quota_goal(). However, the zero target_value is meaningless. In
this case, the quota goal is always evaluated as achieved or
over-achieved. The quota will only keep being reduced.
Simply avoid using zero target_value by adding a check in the core layer
DAMOS quota goal parameters validation/commit path,
damos_commit_quota_goal(). Update it to return an error in the case.
Also update its caller to propagate the error. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
