| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Eclipse ThreadX NetX Duo versions up to and including 6.5.2.202603, the RTSP server returns a raw parser error for a malformed Session header and never releases the response packet it allocated. An unauthenticated client can drain the server's packet pool with a few dozen requests, stopping the RTSP server and, where the pool is shared, the rest of the network stack until the device restarts. |
| Denial of Service via OOM vulnerability in Apache ActiveMQ, ActiveMQ Broker.
An authenticated OpenWire client that sends a ConsumerInfo for a temporary queue/topic owned by another connection is rejected with InvalidDestinationException, but the rejected Subscription is left behind in the region's subscriptions map. Repeating the request leaks broker heap until OOM because the broker does not clean up the rejected subscriptions in the map.
This issue affects Apache ActiveMQ: from 6.0.0 before 6.3.3, before 5.19.12; ActiveMQ Broker: from 6.0.0 before 6.3.3, before 5.19.12.
Users are recommended to upgrade to version 6.4.0, 6.3.3, or 5.19.12, which fixes the issue. |
| The Mbed TLS crypto shim driver in drivers/crypto/crypto_mbedtls_shim.c drives PSA multipart cipher and AEAD operations. In mbedtls_cbc() and mbedtls_aead(), every error path after a successful psa_cipher_encrypt_setup() / psa_aead_decrypt_setup() returned directly without calling psa_cipher_abort() / psa_aead_abort(). Because the abort is the only thing that reaches mbedtls_cipher_free(), each failed operation permanently leaked the heap-allocated mbedtls_aes_context (roughly 288 bytes) that setup had allocated from Mbed TLS's fixed static heap (_mbedtls_heap[CONFIG_MBEDTLS_HEAP_SIZE], default 512 bytes). With CONFIG_PSA_CRYPTO_PROVIDER_TFM the leaked object is instead a finite secure-partition multipart-operation slot.
The failure is chosen by an unauthenticated attacker. With CONFIG_NET_L2_IEEE802154_SECURITY backed by this driver, ieee802154_decrypt_auth() in subsys/net/l2/ieee802154/ieee802154_security.c invokes cipher_ccm_op() on every received secured frame, with no authentication ahead of the MIC check. A device in radio range can transmit a stream of syntactically valid 802.15.4 frames carrying a bogus MIC; each one makes psa_aead_verify() fail and leaks a block. The CBC path is reachable the same way through the OSDP secure channel, where CONFIG_OSDP_SC_ENABLED selects this shim and osdp_encrypt() / osdp_decrypt() leave out_buf_max unset, so every operation fails inside psa_cipher_update().
Exhausting the Mbed TLS heap — which the default configuration reaches after a couple of failed operations, and any realistic configuration reaches in well under a second of frames — makes all subsequent mbedtls_calloc() calls fail. Every later cryptographic operation in the image then fails permanently, including link-layer security and any TLS/DTLS sharing the same heap, until the device is rebooted. There is no memory corruption or information disclosure: frames with an invalid MIC are still rejected, so the impact is limited to availability.
The fix routes all post-setup failures in mbedtls_cbc() and mbedtls_aead() through a common error: label that calls the matching PSA abort before returning. Setup failures need no change, since the PSA core aborts the operation itself when setup fails. |
| The Bluetooth Classic Hands-Free Profile HF role in subsys/bluetooth/host/classic/hfp_hf.c does not release the AT command buffers that are still queued on hf->tx_pending when the RFCOMM DLC goes down. hfp_hf_disconnected() only cancelled the work items and cleared hf->acl, and no other code path ever dequeues those buffers, so each one is permanently lost from the fixed hf_pool (CONFIG_BT_MAX_CONN + 1 buffers, i.e. two in the default configuration). The same function also left BT_HFP_HF_FLAG_CONNECTED set, and hfp_hf_create() wiped the object with memset() as soon as hf->acl was NULL, without checking whether hf->work, hf->slc_work or hf->deferred_work was still pending or running.
The remote Audio Gateway peer controls the trigger end to end and needs no application involvement: an unsolicited +BCS: 1 response makes bcs_handle() call bt_hfp_hf_select_codec() and queue an AT+BCS buffer, which cannot be transmitted while BT_HFP_HF_FLAG_RX_ONGOING is set, and an immediately following RFCOMM DISC strands that buffer. Repeating the connect / +BCS / disconnect cycle a couple of times empties hf_pool for good.
With the pool exhausted, HFP command sending fails permanently, and because hfp_hf_send_cmd() allocates with K_FOREVER (bt_rfcomm_create_pdu() → bt_conn_create_pdu()) from the Bluetooth RX context — where that timeout is not downgraded to K_NO_WAIT — one further +BCS from the peer parks the Bluetooth RX thread inside net_buf_alloc() with no possible waker, halting all HCI event processing until the device is rebooted. Separately, reusing the HF slot while a work handler was still queued or running allowed memset() to wipe live k_work items out from under the system workqueue, corrupting shared kernel workqueue state. Exploitation requires an established HFP session (for SSP devices L2CAP enforces authentication before the RFCOMM channel is reachable) and a build with CONFIG_BT_HFP_HF enabled. |
| A memory leak flaw was found in cockpit-ws. The login page handler leaks a heap allocation on every unauthenticated request that carries a CockpitLang cookie, allowing a remote unauthenticated attacker to exhaust memory on the host and cause a denial of service. |
| FFmpeg git-master before commit d5873b was discovered to contain a memory leak in the component libavutil/iamf.c. |
| A memory management flaw in the MongoDB C Driver's handling of compressed responses may cause the client library to hold on to memory that is never released. An unauthenticated party that controls the database endpoint a client application connects to may cause repeated, unbounded memory growth in that application, which may result in the application becoming unavailable. No credentials, transport security settings, or user interaction are required. |
| Memory Leak with Amplification in µD3TN BPv6 EID Reference Handling allows Unauthenticated Remote Attacker to Cause DoS |
| QuickJS-NG before 0.16.0 contains a memory leak vulnerability in js_atomics_store() in quickjs.c that fails to free the converted value when returning a RangeError. Attackers running JavaScript can repeatedly call Atomics.store with a valueOf that detaches or shrinks the buffer to exhaust heap memory and cause denial of service. |
| A memory exhaustion issue exists in Open5GS v2.8.0 in the HTTP/2 SBI server. Repeated header names cause previously allocated header strings to be leaked, and HPACK compression allows an unauthenticated remote attacker to trigger tens of thousands of duplicate headers with a small request. Repeated crafted requests can cause persistent heap growth, exhaust process memory, and terminate the affected Open5GS network function, resulting in denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: bmp280: fix stack leak in bmp580 trigger handler
bmp580_trigger_handler() declares its scan buffer on the stack without
an initializer and then memcpy()s 3 bytes of 24-bit sensor data into
each 4-byte __le32 field. The high byte of comp_temp and comp_press is
left uninitialized, and the channel storagebits is 32, so two bytes of
stack are pushed to userspace per scan.
This is a regression from when the buffer lived in the private data, the
move to a stack-local struct dropped the implicit zeroing.
bme280_trigger_handler() was fixed up to handle this bug, but this
driver was not fixed because there was no padding hole, but rather a
short-fill issue.
Fix this all by just zero-initializing the structure on the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: adis16550: fix stack leak in trigger handler
adis16550_trigger_handler() declares the scan data array on the stack
without initializing it. The memcpy() at the bottom fills only the
first 28 bytes (TEMP + 6 channels of GYRO/ACCEL data), and
iio_push_to_buffers_with_timestamp() writes the s64 timestamp at the
8-byte-aligned offset 32. Bytes 28-31 remain uninitialized stack data
which leaks to userspace on ever trigger.
Fix this all by just zero-initializing the structure on the stack. |
| GraphQL-core is a Python port of the GraphQL.js reference implementation. From 3.3.0a3 until 3.3.1, validate() reuses a module-level ValidationAbortedError when a document exceeds max_errors. Python appends frames to the reused exception's traceback on every raise, retaining each document, validation context, and error set for the process lifetime. An unauthenticated client can repeatedly submit a small document with more than 100 validation errors to cause unbounded memory growth before query execution, eventually exhausting worker memory without disclosing or modifying data. This issue is fixed in version 3.3.1. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix mm_struct reference leak in aie2_populate_range()
aie2_populate_range() jumps back to the again label without calling
mmput(mm), leaking a reference to the mm_struct.
Add the missing mmput() before jumping to again. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: fix pgtable leak in migrate_vma_insert_huge_pmd_page
When migrate_vma_insert_huge_pmd_page() jumps to unlock_abort due
to a PMD check failure, the pgtable allocated earlier via
pte_alloc_one() is never freed, causing a memory leak.
Added free_abort label to release the pgtable in error path. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: Fix DMA fence leak in iio_buffer_enqueue_dmabuf()
iio_buffer_enqueue_dmabuf() allocates a struct iio_dma_fence (104 bytes,
kmalloc-128) via kmalloc_obj()+dma_fence_init(), which sets the initial
kref to 1. It then calls dma_resv_add_fence() which takes a second
reference (kref=2), and stores a raw pointer in block->fence.
On the success path the function returns without calling dma_fence_put()
to release the initial reference, so every buffer enqueue permanently
leaks one kmalloc-128 allocation.
The iio_buffer_cleanup() work item only releases the temporary reference
taken during completion signalling by iio_buffer_signal_dmabuf_done();
the initial reference from dma_fence_init() is never released.
With four iio_rwdev instances at 240kHz and 512 samples per buffer,
this produces ~1875 kmalloc-128 allocations per second matching the
observed slab growth exactly. A test with ftrace confirmed that the
dma_fence_destroy event was never triggered.
Fix by calling dma_fence_put() after dma_resv_add_fence(), transferring
ownership of the fence to the DMA reservation object. The DMA fence then
gets properly discarded after being signalled. |
| In the Linux kernel, the following vulnerability has been resolved:
gpiolib: fix memory leak in gpiod_set_array_value_complex() on error paths
A drive-by review by Sashiko reports that, after a failed call to
gpiochip_set_multiple(), gpiod_set_array_value() returns abruptly,
bypassing the freeing of possibly alloced bitmaps, potentially leaking
memory. It is an unlikely error path, but is possible.
Defer the return code check until after the bitmap_free() block. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: alps: unregister DualPoint Stick input device on remove
alps_input_configured() allocates a second input device ("DualPoint
Stick") with input_allocate_device() and registers it, but the
alps_driver struct has no .remove handler and input2 is not tracked in
hdev->inputs. The default remove path (hid_hw_stop -> hidinput_disconnect)
only iterates hdev->inputs, so input2 is never unregistered and leaks
on every device removal.
Add a .remove handler that stops the device first (preventing URB
callbacks from touching input2 during teardown) and then unregisters
input2. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Free transport channel on IDR failure
If transport channel setup succeeds but the following IDR insertion fails,
the error path destroys the transport device and frees the channel info
without invoking the transport cleanup callback.
Call chan_free() before destroying the device so transport specific
resources such as IRQs, mailbox channels and mapped shared memory are
released consistently with the normal teardown path. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Drop handle on protocol bind failures
The SCMI bus notifier acquires an SCMI handle when the driver core emits
BUS_NOTIFY_BIND_DRIVER, before invoking the protocol driver probe
callback. The protocol probe path only checks whether sdev->handle is
set.
If device_link_add() fails after the handle has been acquired, the
protocol device can still bind with a valid handle but without the
dependency link to the SCMI parent. A concurrent parent unbind can then
miss the child and tear down the SCMI instance while the child still
holds a handle into it.
If the protocol driver probe later fails, for example with
-EPROBE_DEFER, the driver core emits BUS_NOTIFY_DRIVER_NOT_BOUND rather
than BUS_NOTIFY_UNBOUND_DRIVER. The SCMI notifier only released the
handle on BUS_NOTIFY_UNBOUND_DRIVER, so each failed protocol-device bind
leaked the SCMI instance users refcount and left sdev->handle set after
the failed probe.
Make the link helper report failure and drop the acquired handle if the
link cannot be created. Also handle BUS_NOTIFY_DRIVER_NOT_BOUND in the
same cleanup path used for unbind so failed probes balance the earlier
BUS_NOTIFY_BIND_DRIVER acquisition. |
