| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| c-ares is an asynchronous resolver library. From ver 1.32.3 until 1.34.7, a use-after-free / double-free in c-ares' query-completion handling. The same flaw — a query's callback being invoked while the query is still linked in the channel's internal lookup structures — is present at multiple points in the resend/finish path (timeout handling, response handling, and query dispatch). If the query, or for ares_getaddrinfo() the owning host_query, is freed as a side effect of that callback, it is then accessed and/or freed a second time. This vulnerability is fixed in ver 1.34.7. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: track the connection owning a byte-range lock
SMB2_LOCK adds each granted byte-range lock to both the file lock list
and the lock list of the connection which handled the request. The
final close and durable handle paths, however, remove the connection
list entry while holding fp->conn->llist_lock.
With SMB3 multichannel, the connection handling the LOCK request can be
different from the connection which opened the file. The entry can
therefore be removed under a different spinlock from the one protecting
the list it belongs to. A concurrent traversal can then access freed
struct ksmbd_lock and struct file_lock objects.
Record the connection owning each lock's clist entry and hold a
reference to it while the entry is linked. Use that connection and its
llist_lock for unlock, rollback, close, and durable preserve. Durable
reconnect assigns the new connection as the owner when publishing the
locks again. |
| PX4 Autopilot through 1.17.0 contains a use-after-free vulnerability in TemperatureCalibration::start() due to a race condition between task spawning and object deletion. Attackers can trigger the calibration process via shell commands to write to freed heap memory, corrupting unrelated objects or allocator metadata and destabilizing heap operations. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: pci-epf: fix use-after-free in nvmet_pci_epf_exec_iod_work()
nvmet_pci_epf_exec_iod_work() submits an I/O command with req->execute()
and then waits for the command to complete and transfers the data back
to the host. This wait is not needed for commands that do not transfer
data from the device to the host. To decide whether that wait is needed,
it reads iod->data_len and iod->dma_dir after calling req->execute().
However, once req->execute() is called, the command may complete
asynchronously on another CPU. For commands that do not require a
device-to-host data transfer, nvmet_pci_epf_queue_response() calls
nvmet_pci_epf_complete_iod() directly, which can free the iod before it
reads iod->data_len and iod->dma_dir, resulting in the KFENCE use-after-
free:
BUG: KFENCE: use-after-free read in nvmet_pci_epf_exec_iod_work+0x288/0x798 [nvmet_pci_epf]
Use-after-free read at 0x00000000fdfa6d03 (in kfence-#63):
nvmet_pci_epf_exec_iod_work+0x288/0x798 [nvmet_pci_epf]
process_one_work+0x15c/0x4f0
worker_thread+0x18c/0x30c
kthread+0x130/0x140
ret_from_fork+0x10/0x20
kfence-#63: 0x00000000e3de0e71-0x00000000c938ad62, size=712, cache=kmalloc-1k
allocated by task 10 on cpu 0 at 73.995480s (0.005122s ago):
mempool_kmalloc+0x1c/0x28
mempool_alloc_noprof+0x40/0x9c
nvmet_pci_epf_poll_sqs_work+0xd4/0x344 [nvmet_pci_epf]
process_one_work+0x15c/0x4f0
worker_thread+0x18c/0x30c
kthread+0x130/0x140
ret_from_fork+0x10/0x20
freed by task 131 on cpu 3 at 73.995521s (0.008385s ago):
mempool_kfree+0x10/0x20
mempool_free+0x44/0x64
nvmet_pci_epf_free_iod+0x88/0x98 [nvmet_pci_epf]
nvmet_pci_epf_cq_work+0xfc/0x280 [nvmet_pci_epf]
process_one_work+0x15c/0x4f0
worker_thread+0x18c/0x30c
kthread+0x130/0x140
ret_from_fork+0x10/0x20
Fix this by referring to iod->data_len and iod->dma_dir before calling
req->execute(). The remaining iod accesses such as iod->status are only
reached on the device-to-host read path. In this case,
nvmet_pci_epf_queue_response() signals iod->done instead of freeing the
iod, so the iod stays valid. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Avoid private hash use-after-free on final put
futex_private_hash_put() drops the reference to fph before evaluating
fph->mm for wake_up_var(). futex_ref_put() enables preemption again before
returning. If that put drops the final reference and the task is preempted,
another task can pivot to the replacement hash and free the old hash after
an RCU grace period. The first task then reads fph->mm from the freed
allocation when it resumes.
KASAN reports a slab-use-after-free in futex_private_hash_put(), with the
read at offset 24 in a freed kmalloc-512 allocation. The allocation and
free stacks point to futex_hash_allocate() and the RCU free path,
respectively.
Load the mm pointer while the fph reference is still held and pass the
saved value to wake_up_var(). wake_up_var() uses the pointer as a waitqueue
key and does not dereference the mm through it. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: ft260: fix stack-use-after-return write in I2C read race
ft260_i2c_read() points dev->read_buf at a caller-supplied buffer
(often an on-stack variable), arms a completion and waits up to five
seconds for the device to return the data. The HID input callback
ft260_raw_event() runs in the input/IRQ path, independent of the
dev->lock mutex held by the read path, and copies the device-supplied
payload into dev->read_buf after a plain NULL check.
These two paths share read_buf, read_idx and read_len with no
serialization. If the device delays its response until the read
times out, ft260_i2c_read() resets the controller, clears read_buf
and returns, unwinding the stack frame the buffer lived in. A
response that arrives at that moment lets ft260_raw_event() pass the
NULL check and then memcpy() the device-controlled payload into the
now-freed stack location, a bounded but attacker-influenced
stack-use-after-return write triggerable by malicious or
malfunctioning hardware.
Add a dedicated spinlock that serializes every access to read_buf,
read_idx and read_len. ft260_raw_event() now holds it across the
NULL check, the memcpy and the index update, while the read path
takes it when arming and when clearing the buffer, so the teardown
can no longer slip between the check and the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: nintendo: stop device IO before hid_hw_stop on probe failure
nintendo_hid_probe() calls hid_device_io_start() before joycon_init()
and joycon_leds_create(). If either fails, the error path jumps to
err_close which calls hid_hw_close()/hid_hw_stop() without first calling
hid_device_io_stop().
hid_hw_stop() does not stop device IO, so hid_input_report() may still
run and access driver data that is being torn down, resulting in a
use-after-free.
Add an err_io_stop label that calls hid_device_io_stop() before
hid_hw_close(), and point the two post-io_start error paths at it. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: usbfs: fix use-after-free of usb_device in usbdev_release()
usbdev_release() drops its reference to the struct usb_device before
draining the list of completed async URBs, but that drain path reads back
through the same object: free_async() calls dec_usb_memory_use_count()
for any URB whose buffer came from the usbfs mmap() region, and its first
statement is bus_to_hcd(ps->dev->bus).
After a disconnect the usbfs reference can be the last one, in which case
usb_put_dev() frees the device and the subsequent loop reads offset 80 of
freed memory and uses the result as a struct usb_hcd *, which
hcd_buffer_free_pages() then dereferences.
This is reachable by an unprivileged process that has read/write access to
a /dev/bus/usb node: mmap() the fd, submit one URB with a buffer inside the
mapping, wait for the device to be unplugged, then munmap() and close().
It reproduces on every attempt rather than being a race, because a live
MAP_SHARED vma holds a reference on the struct file, so usbdev_release()
cannot run until the last vma is gone and the freeing branch of
dec_usb_memory_use_count() is always taken.
BUG: KASAN: slab-use-after-free in dec_usb_memory_use_count+0x3ae/0x410
Read of size 8 at addr ffff8880122ee050 by task poc/769
CPU: 1 UID: 1000 PID: 769 Comm: poc Tainted: G B 6.12.94 #3
Call Trace:
dec_usb_memory_use_count+0x3ae/0x410
free_async+0x2aa/0x4f0
usbdev_release+0x375/0x460
__fput+0x3ea/0xb50
__x64_sys_close+0x86/0x100
Allocated by task 11:
usb_alloc_dev+0x55/0xd90
hub_event+0x2524/0x43d0
Freed by task 769:
kfree+0x121/0x360
device_release+0xd2/0x280
usb_put_dev+0x23/0x30
usbdev_release+0x2d8/0x460
Release the device reference after the drain loop instead. Nothing between
the two points requires it to have been dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: wait for FR_FINISHED on abort_on_kill to prevent use-after-free
The abort_on_kill path in request_wait_answer() calls fuse_abort_conn()
and returns without waiting for FR_FINISHED. If fuse_dev_do_write() is
concurrently processing the same request (FR_LOCKED set), the caller
frees req->args while it is still being accessed, causing a
use-after-free.
Fix this by jumping to the existing wait_event(FR_FINISHED) instead of
returning early. The wait will not hang because fuse_abort_conn()
ensures all requests are ended. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double-free in SMB2_open() replay
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_open_init() fails before the next send, cleanup
retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double-free in SMB2_flush() replay
SMB2_flush() keeps its response buffer bookkeeping across replay
attempts. If a replayable flush response is received and the retry then
fails before cifs_send_recv() stores a replacement response, flush_exit
will free the stale response pointer a second time.
Reinitialize resp_buftype and rsp_iov at the top of the replay loop so
cleanup only acts on response state produced by the current attempt.
This fixes a double-free without changing replay handling for successful
requests. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix change notify replay double-free
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_notify_init() fails before the next send, cleanup
retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double-free in SMB2_ioctl() replay
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_ioctl_init() fails before the next send, cleanup
retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: sof-audio: Fix error path in sof_widget_setup_unlocked()
If either tplg_ops->dai_config or widget_kcontrol_setup fail during widget
setup we would double decrement the use_count of the widget because the
sof_widget_free_unlocked() would be called twice, similarly the core_put
would be invoked twice as well.
Since the use_count and core_put() is handled within the widget_free
function we need to return without falling through the pipe_widget_free
label.
The fixes tag is picked to the last change around this part of the code
which is adequately old enough for backporting purposes. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix query_info() replay double-free
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_query_info_init() fails before the next send,
cleanup retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix query directory replay double-free
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_query_directory_init() fails before the next send,
cleanup retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: letsketch: fix UAF on inrange_timer at driver unbind
letsketch_driver does not provide a .remove callback, but
letsketch_probe() arms a per-device timer:
timer_setup(&data->inrange_timer, letsketch_inrange_timeout, 0);
The timer is re-armed from letsketch_raw_event() with a 100 ms
timeout on every pen-in-range report, and its callback dereferences
data->input_tablet to deliver a synthetic BTN_TOOL_PEN release.
letsketch_data is allocated with devm_kzalloc(), and its input_dev
fields are devm-allocated via letsketch_setup_input_tablet(). On
device unbind (USB unplug or rmmod), the HID core runs its default
teardown and devm cleanup frees both letsketch_data and the input
devices. Because no .remove callback exists, nothing drains the
timer first: if raw_event armed it within ~100 ms of the unbind,
the pending timer fires on freed memory. This is a UAF read of
data and of data->input_tablet, followed by input_report_key() /
input_sync() into the freed input_dev.
The same problem can occur on the probe error path: if
hid_hw_start() enabled I/O on an always-poll-quirk device and then
failed, raw_event may have armed the timer before devm releases
data.
Fix by adding a .remove callback that calls hid_hw_stop() first.
hid_hw_stop() synchronously kills the URBs that deliver raw_event(),
so once it returns no path can re-arm the timer. timer_shutdown_sync()
then drains any in-flight callback and permanently disables further
mod_timer() calls. Apply the same timer_shutdown_sync() in the probe
error path so the timer is guaranteed not to outlive data. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/tas2781: Cancel async firmware request at unbind
TAS2781 HDA I2C and SPI queue RCA firmware loading from component
bind with request_firmware_nowait(). The firmware loader keeps the
callback module pinned and holds a device reference, but the callback
still uses driver-private HDA state.
Component unbind removes controls and DSP state immediately. Later
device removal tears down the TAS2781 private data, including
codec_lock. If the async firmware callback runs after unbind has
started, it can operate on state that is being torn down.
Cancel or synchronize the async firmware request before removing
controls and DSP state. A queued callback is cancelled, and an
already-running callback is allowed to finish before unbind continues. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: fix use-after-free of a master VLAN's multicast context
br_multicast_toggle_one_vlan() clears BR_VLFLAG_MCAST_ENABLED under
br->multicast_lock before stopping a VLAN's multicast context. That is
the teardown handshake: lockless readers gate on the flag through
br_multicast_ctx_should_use() -> br_multicast_ctx_vlan_disabled(), so
once it is cleared under the lock no reader can arm the context again.
For a master VLAN the handshake never runs. __vlan_del() clears
BRIDGE_VLAN_INFO_BRENTRY before calling br_vlan_put_master(), so
br_multicast_toggle_one_vlan(masterv, false) returns early on
!br_vlan_is_brentry(vlan): the flag stays set and br->multicast_lock is
never taken. br_vlan_put_master() then drains the context in
br_multicast_ctx_deinit() and frees the VLAN through call_rcu(), while a
reader still inside rcu_read_lock() sees the context as enabled and
re-arms it. The port and port-VLAN branch of the function has no
br_vlan_is_brentry() test and flips the flag under br->multicast_lock,
so it is not affected.
The reader is the bridge transmit path. For a master VLAN
br_multicast_rcv() selects brmctx = &vlan->br_mcast_ctx with
pmctx = NULL, so IGMP sent to the bridge device re-arms the context's
timers after br_multicast_ctx_deinit() has already stopped them.
BUG: KASAN: slab-use-after-free in detach_if_pending+0x412/0x4a0
Write of size 8 at addr ffff88810ac39918 by task brmc/601
__mod_timer+0x51a/0xc50
br_multicast_host_join+0x25b/0x390
__br_multicast_add_group+0x468/0x530
br_ip4_multicast_add_group+0x1a0/0x260
br_multicast_rcv+0x2cda/0x61e0
br_dev_xmit+0x6c4/0x1540
Allocated by task 610:
br_vlan_add+0x111/0xb40
br_vlan_info+0x370/0x3e0
Freed by task 0:
kfree+0x1a7/0x4f0
rcu_core+0x7dc/0x10a0
Only test br_vlan_is_brentry() when enabling, like the
br_multicast_ctx_vlan_global_disabled() test next to it. Disabling then
always clears BR_VLFLAG_MCAST_ENABLED under br->multicast_lock before
br_multicast_ctx_deinit() drains the context. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: espintcp: fix UAF during close
ZDI reported and analyzed a race condition during close for espintcp
sockets:
espintcp_close() frees emsg->skb via kfree_skb() without holding
any socket lock. Concurrently, the xfrm_trans_reinject work queue
invokes esp_output_tcp_finish() -> espintcp_push_skb() ->
espintcp_push_msgs() -> skb_send_sock_locked(), which reads the
same skb as a data source.
Fix this by adding a synchronize_rcu() call after resetting sk_prot,
since esp_output_tcp_finish() runs under RCU and won't use a socket
with sk_prot == &tcp_prot. Simply taking the socket lock in
espintcp_close() could lead to leaks, if esp_output_tcp_finish()
re-adds an skb in the slot we just freed. After this, the existing
barrier() is no longer needed. |
