| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Incomplete cleanup in GPU in Google Chrome prior to 156.0.8078.47 allowed a remote attacker who had compromised the renderer process to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Incomplete cleanup in Permissions in Google Chrome prior to 156.0.8078.47 allowed a remote attacker leveraging social engineering to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Low) |
| Incomplete cleanup in DevTools in Google Chrome prior to 157.0.8103.38 allowed a remote attacker to bypass web origin policy via a crafted HTML page. (Chromium security severity: Low) |
| Incomplete cleanup in DevTools in Google Chrome prior to 157.0.8103.38 allowed a remote attacker to bypass system access restrictions via a crafted Chrome extension. (Chromium security severity: Low) |
| Incomplete cleanup in Browser in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) |
| Incomplete cleanup in V8 in Google Chrome prior to 157.0.8103.38 allowed a local attacker to read memory via a local program. (Chromium security severity: Medium) |
| Incomplete cleanup in HID in Google Chrome prior to 156.0.8078.47 allowed a remote attacker who had compromised the renderer process and leveraged social engineering to bypass system access restrictions via a crafted Chrome extension. (Chromium security severity: Medium) |
| Incomplete cleanup in Extensions in Google Chrome prior to 156.0.8078.47 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: Medium) |
| The AVRCP Target role in subsys/bluetooth/host/classic/avrcp.c keeps its vendor-dependent response transmit state in a per-connection object selected by connection index (get_avrcp_tg()), with the per-transfer context (tid, sent_len, and the BT_AVRCP_TG_FLAG_TX_ONGOING flag) stored in the user_data of the queued response net_buf. The AVCTP teardown handler avrcp_disconnected() did not cancel tg->vd_rsp_tx_work and did not release the buffers still queued on tg->vd_rsp_tx_pending, so a link drop in the middle of a fragmented response left the buffer on the list with TX_ONGOING still set.
A remote AVRCP Controller can trigger this deterministically: it issues a vendor-dependent command whose response exceeds one AVRCP fragment (for example GetElementAttributes or GetCapabilities), lets bt_avrcp_tg_vendor_tx_work() emit the START fragment, and then drops the ACL link instead of sending REQUEST_CONTINUING_RESPONSE. The AVCTP control channel requires an encrypted BR/EDR link (BT_SECURITY_L2), so the attacker must be a paired peer within radio range; no user interaction is needed.
Because the Target objects are static and reused, the next connection landing on the same connection index finds the stale buffer at the head of vd_rsp_tx_pending. Every run of the TX work sees TX_ONGOING and returns immediately, so all further vendor-dependent responses queue behind the stale head and are never sent — a persistent loss of AVRCP Target function that no timeout clears and only a reboot recovers. Each cycle also leaks one response buffer from a shallow application pool, and a new peer that sends REQUEST_CONTINUING_RESPONSE clears the stale TX_ONGOING via bt_avrcp_tg_process_continuing_cmd(), causing the un-sent remainder of the previous peer's response to be transmitted to it.
The fix cancels tg->vd_rsp_tx_work and unrefs every buffer on tg->vd_rsp_tx_pending in avrcp_disconnected(); since the TX context lives in the buffer user_data, releasing the buffers also resets the TX state machine. There is no memory corruption: the pre-fix buffer is leaked with a live reference, so no use-after-free arises. |
| A flaw was found in the Linux kernel. The existing KVM SEV API has a vulnerability that allows a non-root (host) user-level application to crash the host kernel by creating a confidential guest VM instance in AMD CPU that supports Secure Encrypted Virtualization (SEV). |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix perf_pmu_migrate_context() leaving events behind
__perf_pmu_remove() walks the group leaders of a CPU and PMU with
perf_event_groups_for_cpu_pmu(), removing each one as it goes.
perf_remove_from_context() takes the leader out of the groups rbtree,
after which rb_next() on that node returns NULL, prematurely ending the
walk. Other groups stay behind in the source context.
On CPU hotplug, they are then torn down with the dying CPU. They keep
running until teardown, while the PMU's interrupt and migrated events
are on a new CPU, which drivers rely on never happening.
Walk ctx->event_list instead and pick out the PMU's events by their
pmu_ctx. |
| In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: Don't reset VMBus connection state on error/exit paths
In two places, current code forces vmbus_connection.conn_state to
DISCONNECTED prior to calling vmbus_disconnect(). But vmbus_disconnect()
calls vmbus_initiate_unload(), which unloads the VMBus connection
only if the conn_state is CONNECTED. Consequently, the connection
remains and the Hyper-V host might continue to send messages or post
VMBus interrupts.
The problem was introduced in commit 74347a99e73ae ("x86/Hyper-V:
Unload vmbus channel in hv panic callback"), in that
vmbus_initiate_unload() started checking the current connection
state before doing the unload. This commit removed some occurrences
where conn_state was forced to DISCONNECTED, but these two remained,
apparently due to an oversight at the time.
Fix this by not forcing conn_state to DISCONNECTED during VMBus exit,
or if a failure occurs when establishing the connection in the first
place. Whatever value conn_state has at the time is then read by
vmbus_initiate_unload() to determine if there is a connection to
be unloaded. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: tlb: Flush walk cache when unsharing PMD tables
When huge_pmd_unshare() is called to unshare a PMD table, the
tlb_unshare_pmd_ptdesc() function sets tlb->unshared_tables=true
but the aarch64 tlb_flush() only checked tlb->freed_tables to
determine whether to use TLBF_NONE (vae1is, invalidates walk
cache) or TLBF_NOWALKCACHE (vale1is, leaf-only).
This caused the stale PMD page table entry to remain in the walk cache
after unshare, potentially leading to incorrect page table walks.
Fix by including unshared_tables in the check, so that when
unsharing tables, TLBF_NONE is used and the walk cache is properly
invalidated.
Here is the detailed distinction between vae1is and vale1is:
| Instruction Combination | Actual Invalidation Scope |
| ------------------------ | --------------------------------------------------|
| `VAE1IS` + TTL=`0` | All entries at all levels (full invalidation) |
| `VAE1IS` + TTL=`2` (L2) | Non-leaf at Level 0/1 + leaf at Level 2 |
| `VALE1IS` + TTL=`0` | Leaf entries at all levels (non-leaf not cleared) |
| `VALE1IS` + TTL=`2` (L2) | Leaf entry at Level 2 only | |
| In the Linux kernel, the following vulnerability has been resolved:
ibmveth: h_free logical LAN on open-fail after register
ibmveth_open() registers the logical LAN, then allocates the RX
buffer pools. A pool failure jumps to out_free_buffer_pools without
h_free_logical_lan(), so PHYP still owns the buffer-list page when
it is unmapped. request_irq() failure already issued the hypercall
before taking the same label.
Move that h_free to the shared post-register unwind so both paths
deregister before the buffer list is unmapped. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sdhci-sprd: disable runtime PM on remove
sdhci_sprd_probe() enables runtime PM, while sdhci_sprd_remove() does
not perform the corresponding runtime PM cleanup.
The probe failure path disables runtime PM before disabling the clocks,
but the normal remove path directly disables clocks that are also
managed by the runtime PM callbacks. If the device is runtime
suspended, those clocks may already be disabled.
Resume the device before removal, disable runtime PM and drop the
temporary runtime PM reference before disabling the clocks.
This issue was found by manual code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: steam: Refactor registration
This refactors and simplifies the registration/unregistration flow. Since
we now only perform registration when the client isn't opened anymore, the
logic for handling that can be removed, and the rest of the function
streamlined.
We also remove the previous assumption that we have a serial number to show
we're registered, replacing it with a single purpose boolean.
In a previous refactor the code for unregistering a battery if later
registration steps failed was accidentally left out. As a result, a
lingering power_supply object could get left over after the steam object
was torn down. This is also fixed here. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix session leak in ksmbd_session_register()
See the procedure below:
smb2_sess_setup
ksmbd_smb2_session_create
__session_create
atomic_set(&sess->refcnt, 2)
hash_add(sessions_table, &sess->hlist, sess->id)
ksmbd_session_register
xa_store(&conn->sessions, sess->id, sess) // fail
ksmbd_user_session_put
atomic_dec(&sess->refcnt) // refcnt is 1, session is not freed
Remove the session from sessions_table and drop its table reference if
xa_store() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix dentry folio leak in find_in_level
find_in_level() gets a dentry folio with f2fs_find_data_folio() before
calling find_in_block(). If find_in_block() returns an error, the
function stores the error in res_folio and breaks out of the loop without
dropping the dentry folio.
This leaks the folio reference on the find_in_block() error path. Drop
the dentry folio before returning the error to the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Allow per function PCI slots to fix slot reset on s390
On s390 systems, which use a machine level hypervisor, PCI devices are
always accessed through a form of PCI pass-through which fundamentally
operates on a per PCI function granularity. This is also reflected in the
s390 PCI hotplug driver which creates hotplug slots for individual PCI
functions. Its reset_slot() function, which is a wrapper for
zpci_hot_reset_device(), thus also resets individual functions.
Currently, the pci_create_slot() assigns the same pci_slot object to
multifunction devices. This approach worked fine on s390 systems that only
exposed virtual functions as individual PCI domains to the operating
system. Since commit 44510d6fa0c0 ("s390/pci: Handling multifunctions")
s390 supports exposing the topology of multifunction PCI devices by
grouping them in a shared PCI domain. This creates a problem when resetting
a function through the hotplug driver's slot_reset() interface.
When attempting to reset a function through the hotplug driver, the shared
slot assignment causes the wrong function to be reset instead of the
intended one. It also leaks memory as we do create a pci_slot object for
the function, but don't correctly free it in pci_slot_release().
Add a flag for struct pci_slot to allow per function PCI slots for
functions managed through a hypervisor, which exposes individual PCI
functions while retaining the topology. Since we can use all 8 bits for
slot 'number' (for ARI devices), change slot 'number' u16 to account for
special values PCI_SLOT_PLACEHOLDER and PCI_SLOT_ALL_DEVICES. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpci_rt1711h: unregister TCPCI port with devres
rt1711h_probe() registers the TCPCI port before requesting the interrupt
and enabling alert interrupts. If either of those later steps fails, the
probe function returns without unregistering the TCPCI port. The explicit
unregister currently only happens from the remove callback.
Register a devres action immediately after tcpci_register_port() succeeds,
so tcpci_unregister_port() runs on later probe failures and on driver
detach. Drop the remove callback to avoid unregistering the same port
twice.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
