| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The issue was addressed with improved memory handling. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An app may be able to cause unexpected system termination. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: don't retry recv on uncommitted buffers
Commit 41b70df5b38b ("io_uring/net: commit partial buffers on retry")
commits ring provided buffers when a receive is going to be retried after
a partial transfer, so that another request using the same buffer group
can't be handed the memory the first one keeps receiving into. It commits
the number of bytes received so far. That does the job for a single
buffer which is consumed as a whole, but the request hangs on to all it
has mapped:
- For a buffer ring with IOU_PBUF_RING_INC only these bytes are consumed.
The rest of the buffer stays at the head of the ring.
- For a bundle only the buffers which hold these bytes are consumed, the
others that were peeked stay in the ring.
In both cases the next receive with that buffer group gets memory that
the retried request is still going to write to, and whoever comes last
overwrites the data of the other. What the retry fills isn't committed at
all, as the buffer list isn't known any more at that point. So the kernel
hands it out again later on, while the CQE tells the application that it
was used, and for an incremental buffer that it is done with.
The remainder can't be committed in advance: if the request ends up
receiving less, there is no way to tell the application that more was
consumed than the CQE accounts for. Complete the request with what it has
got instead of retrying it. MSG_WAITALL is no longer honoured for
receives into incremental buffers or multi buffer bundles, they can
return a short count, with the request marked as failed like for other
short MSG_WAITALL transfers. |
| In the Linux kernel, the following vulnerability has been resolved:
io-wq: order the exit bit against worker creation task work
io_wq_exit_workers() cancels task work for queued worker creation with
task_work_cancel_match(). That has a plain load of task->task_works.
io_queue_worker_create() adds the new entry and tests IO_WQ_BIT_EXIT to
cancel it if the workqueue is already on its way out.
That must be ordered. task_work_add() has a full barrier via cmpxchg().
But io_wq_exit_start() sets the bit with set_bit() which doesn't have
any memory ordering.
So afaict, on weakly ordered architectures the exiting task may load
task_works before the store of the bit is visible. The other side tests
the bit before the store is visible as well. So the entry remains queued
with worker_refs and the exiting task waits on worker_done indefinitely.
If the task still has rings then io_uring_del_tctx_node() provides the
barrier via test_and_set_bit() in io_wq_set_exit_on_idle(). When it
has closed all rings though that barrier is gone.
Add the barrier after the set_bit(). |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Do not initialize tracefs work if tracing is disabled
If trace buffer allocation fails during early boot (e.g. in
early_trace_init() -> allocate_trace_buffers()), tracing_disabled is
left set to 1 and the global trace array events list remains
uninitialized.
Later during boot, tracer_init_tracefs() (invoked via fs_initcall)
queues tracerfs_init_work asynchronously without checking if tracing was
disabled. When tracer_init_tracefs_work_func() runs, it calls
event_trace_init() and init_tracer_tracefs(&global_trace, NULL)
unconditionally. This leads to __find_event_file() dereferencing an
uninitialized tr->events list, causing an early boot NULL pointer
dereference Oops:
BUG: Kernel NULL pointer dereference on read at 0x00000010
Faulting instruction address: 0xc000000000485be0
Oops: Kernel access of bad area, sig: 7 [#1]
...
NIP [c000000000485be0] __find_event_file+0x70/0x3c0
LR [c000000000448874] init_tracer_tracefs+0x274/0xc80
Call Trace:
init_tracer_tracefs+0x274/0xc80
tracer_init_tracefs_work_func+0x50/0x320
process_one_work+0x1e8/0x5c0
worker_thread+0x1dc/0x3d0
kthread+0x194/0x1b0
start_kernel_thread+0x14/0x18
Check tracing_disabled at the beginning of tracer_init_tracefs_work_func()
and return immediately if tracing is disabled or failed to initialize,
preventing the crash. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/hyperv: Avoid using per-cpu output page in hv_apicid_to_vp_index()
hv_apicid_to_vp_index() currently uses the per-cpu hypercall input
and output pages. This function is called when running in VTL2 and
when running in an SEV-SNP CoCo VM with no paravisor. In the former
case, the output page is allocated, but in the latter case it is
not, so the hypervisor stores the output VP index in memory that has
not been allocated by the guest.
Fix this by using the input page for both input and output. The
hypercall has very small input and output, so sharing the same
page for both is straightforward. An alternative fix is to
allocate the per-cpu output page when running in an SEV-SNP CoCo
guest, but this uses significantly more memory, particularly
with larger vCPUs counts. |
| In the Linux kernel, the following vulnerability has been resolved:
pid_namespace: make zap_pid_ns_processes() freezable
When the init of a pid namespace exits, zap_pid_ns_processes() waits
until all other pids in the namespace are freed. A tracer outside the
namespace that does not reap its traced zombies keeps those pids
allocated, so this wait has no upper bound, and while it lasts every
suspend attempt fails:
Freezing user space processes failed after 20.006 seconds (2 tasks refusing to freeze, wq_busy=0):
Neither wait is freezable. The first loop sleeps in do_wait(), which
returns -ERESTARTSYS on the freezer's fake signal; the loop then clears
TIF_SIGPENDING and waits again without ever freezing. The final loop
sleeps in TASK_INTERRUPTIBLE, and since nothing clears TIF_SIGPENDING
there, schedule() returns immediately after the first freeze attempt
and the task spins until the wait ends.
Sleep in TASK_INTERRUPTIBLE | TASK_FREEZABLE in do_wait(), so that the
freezer can freeze tasks waiting there directly, and in TASK_IDLE |
TASK_FREEZABLE in the final loop, like coredump_task_exit() does.
This was hit with Chromium-based browsers: crashpad ptrace-attaches the
threads of a crashed renderer, which is a pid namespace init, and does
not reap those killed during the dump. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: initialize close_work early to avoid warning
We encountered a warning that close_work was canceled before
initialization.
WARNING: CPU: 7 PID: 111103 at kernel/workqueue.c:3047 __flush_work+0x19e/0x1b0
Workqueue: events smc_lgr_terminate_work [smc]
RIP: 0010:__flush_work+0x19e/0x1b0
Call Trace:
? __wake_up_common+0x7a/0x190
? work_busy+0x80/0x80
__cancel_work_timer+0xe3/0x160
smc_close_cancel_work+0x1a/0x70 [smc]
smc_close_active_abort+0x207/0x360 [smc]
__smc_lgr_terminate.part.38+0xc8/0x180 [smc]
process_one_work+0x19e/0x340
worker_thread+0x30/0x370
? process_one_work+0x340/0x340
kthread+0x117/0x130
? __kthread_cancel_work+0x50/0x50
ret_from_fork+0x22/0x30
This is because when smc_close_cancel_work is triggered, e.g. the RDMA
driver is rmmod and the LGR is terminated, the conn->close_work is
flushed before initialization, resulting in WARN_ON(!work->func).
__smc_lgr_terminate | smc_connect_{rdma|ism}
-------------------------------------------------------------
| smc_conn_create
| \- smc_lgr_register_conn
for conn in lgr->conns_all |
\- smc_conn_kill |
\- smc_close_active_abort |
\- smc_close_cancel_work |
\- cancel_work_sync |
\- __flush_work |
(close_work) |
| smc_close_init
| \- INIT_WORK(&close_work)
So fix this by initializing close_work before establishing the
connection. |
| In the Linux kernel, the following vulnerability has been resolved:
net/iucv: fix the recvmsg window update
iucv_sock_recvmsg() sends the HiperSockets-only AF_IUCV_FLAG_WIN without
testing the transport, so on a classic z/VM socket iucv_send_ctrl() sizes
the skb through a NULL iucv->hs_dev. SO_MSGLIMIT accepts 1, so msglimit / 2
is zero and one recvmsg() on its own socket is enough for an unprivileged
process to take a spurious disconnect.
It also calls iucv_send_ctrl() under spin_lock_bh(&message_q.lock), which
allocates GFP_KERNEL inside a section the code treats as atomic. Sending
outside that lock lets two recvmsg() reach afiucv_hs_send() at once, where
msg_recv is sampled for the advertised window and subtracted after
dev_queue_xmit() -- and sendmsg reaches that counter under lock_sock()
while recvmsg holds no socket lock, so both can subtract the same value,
the counter goes negative and the credit reaches the peer twice.
Test the transport, claim the credit with atomic_xchg() after the last
error exit and hand it back if the transmit fails, and send once the lock
is dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: initialize FileSystemControlFlags in FS_CONTROL_INFORMATION
smb2_get_info_filesystem() reports 48 bytes for FS_CONTROL_INFORMATION,
that is the whole of struct smb2_fs_control_info, but never assigns
FileSystemControlFlags. Those four bytes go to the client as they are
found in the response buffer.
The buffer is zeroed on allocation, so a standalone request leaks
nothing. A compound request can leak: the offset of the next response
is advanced by the length pinned for the previous one, so a reply that
was written into the buffer and then dropped in favour of the short
error response of smb2_set_err_rsp() stays there, and the next reply is
laid over it with only the header cleared.
ksmbd does not implement quota tracking, so report no control flags. |
| In the Linux kernel, the following vulnerability has been resolved:
optee: register TEE devices only once fully initialized
optee_probe() called tee_device_register() on both the client and the
supplicant device before the rest of struct optee had been initialized.
tee_device_register() calls cdev_device_add(), which does two things at
once: it creates /dev/tee0 and /dev/teepriv0, and it links the device
into the tee class so that class_find_device() can find it. From that
moment on the device is reachable both from user space via tee_open()
and from kernel space via tee_client_open_context(). The only gate in
teedev_open() is tee_device_get(), which merely checks that
teedev->desc is non-NULL, which was already set by tee_device_alloc().
Therefore, there is effectively no gate at all.
A context opened in that window can run against a struct optee where
- optee->call_queue.mutex is not initialized by optee_cq_init()
- optee->supp mutex and completions is not initialized by
optee_supp_init()
- optee->rpmb_dev_mutex is not initialized yet,
- the message argument cache is not initialized by
optee_shm_arg_cache_init()
- optee->ctx is still NULL
Any open session or invoke during this window takes uninitialized
mutexes and dereferences a NULL pointer.
Fix it by moving both tee_device_register() calls down to the point
where all of struct optee is set up.
[JW: adding fixes and cc] |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: don't inherit MNT_UMOUNT in clone_mnt()
MNT_UMOUNT gets raised on a mount that umount_tree() or umount_one() has
taken out of its namespace. It's never cleared. __detach_mounts()
unhooks a mount that carries it instead of unmounting it.
disconnect_mount() lets an unmounted child stay attached only if its
parent carries it. propagate_umount() takes it as the sign that a mount
is going to be unmounted when it decides what else can be unmounted,
where a chain of locked mounts ends and where a for reparenting an
overmount.
clone_mnt() copies the flags of the source and only masks
MNT_INTERNAL_FLAGS which doesn't include MNT_UMOUNT. A mount that was
lazily unmounted but is kept alive by a file descriptor can still be
copied when its root is an nsfs or pidfs file because may_copy_tree()
accepts those before checking whether the source is mounted at all:
mount --bind /proc/self/ns/net /tmp/x
exec 3< /tmp/x
umount -l /tmp/x
mount --bind /proc/self/fd/3 /tmp/y
The mount on /tmp/y is attached to the caller's namespace with
MNT_UMOUNT already set and every copy of it inherits the flag again.
That causes a number of bugs:
- Unlink its mountpoint from a mount namespace where it isn't one.
__detach_mounts() takes it for a mount that was unmounted earlier,
unhooks it from its parent and drops the reference the namespace
holds on it. It stays in the namespace with one reference too few
and as its own parent, so it can't be unmounted through the file
descriptor anymore and the namespace never finds it again. When the
namespace goes away it's leaked and points to a freed struct
mnt_namespace that may_change_propagation() and anon_ns_root() read
on the next propagation change or mount_setattr() through the file
descriptor.
- Make it shared and unmount a peer. trace_transfers() follows the
flag from the peer into it and strips it from its peer group.
- Let a propagated umount reach it. gather_candidates() marks it with
T_UMOUNT_CANDIDATE but never puts it on the candidate list, so the
mark is never cleared and every later propagated umount skips it. If
it's the parent of a locked mount handle_locked() takes it as the
cutoff and commits the locked child that should have stayed and
disconnect_mount() leaves that child attached to it, unmounted under
a mounted parent, which is what disconnect_mount() exists to
prevent. When the namespace goes away umount_tree() visits the child
a second time. And once __detach_mounts() has made it its own parent
reparent() never finds the end of the chain of unmounted parents.
A clone is a new mount that has never been unmounted. Add MNT_UMOUNT
to MNT_INTERNAL_FLAGS so clone_mnt() never copies it. And warn when
umount_tree() reaches a mount that already has it set. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: handle empty FILS association request payload
fils_encrypt_assoc_req() accepts a (Re)Association Request frame whose
last element is the FILS Session element. crypt_len is then zero and
aes_siv_encrypt() is called with an empty plaintext.
kmemdup() returns ZERO_SIZE_PTR for a zero-length allocation, so the
unconditional sg_init_one() puts an invalid page into the scatterlist.
With CONFIG_DEBUG_SG this triggers a kernel BUG in sg_set_buf();
without the debug check the bogus page is handed to the crypto backend.
AES-SIV is defined for empty plaintext and the S2V result is then the
complete output, so handle this case before the CTR step, which has
nothing to encrypt. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: don't bump pin count on failed re-pin in nouveau_bo_pin_locked()
nouveau_bo_pin_locked() checks whether an already pinned BO is in a
memory domain compatible with a new pin request. When the domains are
incompatible, it sets -EBUSY but still calls ttm_bo_pin() before
returning.
Callers treat a failed nouveau_bo_pin() as not having acquired a new pin,
so the extra pin count is never decreased by a matching unpin.
This triggers the warning in ttm_bo_release():
WARN_ON_ONCE(bo->pin_count);
Found when fuzzing the nouveau driver with a modified Syzkaller:
WARNING: drivers/gpu/drm/ttm/ttm_bo.c:256 at ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256, CPU#1: syz.3.24/2212
Modules linked in:
CPU: 1 UID: 0 PID: 2212 Comm: syz.3.24 Not tainted 7.2.0 #24 PREEMPT(lazy)
nouveau 0000:01:00.0: gsp:msg fn:103 len:0x40/0x20 res:0x19 resp:0x19
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256
Code: 02 00 0f 85 51 01 00 00 48 8b 7b 08 e8 d2 20 01 00 e9 80 fd ff ff e8 d8 15 c0 fe 90 0f 0b 90 e9 e1 f8 ff ff e8 ca 15 c0 fe 90 <0f> 0b 90 e9 a4 f8 ff ff e8 bc 15 c0 fe be 03 00 00 00 4c 89 e7 e8
msg: 00000000: 05 00 d0 c1 04 00 f0 f1 01 30 00 00 2d 90 00 00 .........0..-...
RSP: 0018:ffffc9000f5cf710 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888018e5d2a8 RCX: ffffffff82bb1b36
RDX: ffff888017b68000 RSI: 0000000000000004 RDI: ffff888018e5d2a8
msg: 00000010: 19 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
RBP: ffff88801261c720 R08: 0000000000000001 R09: ffffed10031cba55
R10: ffff888018e5d2ab R11: 00000000000000f3 R12: ffff888018e5d290
R13: ffff888018e5d2d4 R14: ffff88801b219c18 R15: dffffc0000000000
FS: 0000000000000000(0000) GS:ffff8880e0f6f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b31223ffc CR3: 0000000028e00005 CR4: 0000000000770ef0
PKRU: 80000000
Call Trace:
<TASK>
kref_put include/linux/kref.h:65 [inline]
ttm_bo_put drivers/gpu/drm/ttm/ttm_bo.c:325 [inline]
ttm_bo_fini+0x55/0x80 drivers/gpu/drm/ttm/ttm_bo.c:330
nouveau_gem_object_del+0xb2/0x1b0 drivers/gpu/drm/nouveau/nouveau_gem.c:90
drm_gem_object_free+0x5f/0x90 drivers/gpu/drm/drm_gem.c:1165
kref_put include/linux/kref.h:65 [inline]
__drm_gem_object_put include/drm/drm_gem.h:562 [inline]
drm_gem_object_put include/drm/drm_gem.h:575 [inline]
nouveau_abi16_chan_fini.constprop.0+0x44f/0x5a0 drivers/gpu/drm/nouveau/nouveau_abi16.c:195
nouveau 0000:01:00.0: syz.2.23[2209]: Unknown handle 0x00000000
nouveau_abi16_fini+0x1d0/0x340 drivers/gpu/drm/nouveau/nouveau_abi16.c:225
nouveau_drm_postclose+0x18b/0x3e0 drivers/gpu/drm/nouveau/nouveau_drm.c:1284
nouveau 0000:01:00.0: syz.2.23[2209]: validate_init
drm_file_free.part.0+0x6d6/0xb60 drivers/gpu/drm/drm_file.c:267
drm_file_free drivers/gpu/drm/drm_file.c:237 [inline]
drm_close_helper.isra.0+0x11a/0x160 drivers/gpu/drm/drm_file.c:290
drm_release+0x1ab/0x330 drivers/gpu/drm/drm_file.c:438
__fput+0x39c/0xa60 fs/file_table.c:512
nouveau 0000:01:00.0: syz.2.23[2209]: validate: -2
task_work_run+0x15a/0x230 kernel/task_work.c:233
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0x82b/0x25a0 kernel/exit.c:1009
do_group_exit+0xc2/0x280 kernel/exit.c:1152
get_signal+0x1d6e/0x1f30 kernel/signal.c:3046
arch_do_signal_or_restart+0x7d/0x6e0 arch/x86/kernel/signal.c:337
__exit_to_user_mode_loop kernel/entry/common.c:66 [inline]
exit_to_user_mode_loop+0xdf/0x440 kernel/entry/common.c:101
__exit_to_user_mode_prepare include/linux/irq-entry-common.h:207 [inline]
syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:230 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:318 [inline]
do_syscall_64+0x4f8/0x690 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RI
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: keembay - Fix AEAD unregister count in error path
register_aes_algs() registers the AEAD algorithms before registering the
skcipher algorithms. If skcipher registration fails, the function unwinds
the earlier AEAD registration with crypto_engine_unregister_aeads(), but it
passes ARRAY_SIZE(algs), which is the skcipher table size.
Use ARRAY_SIZE(algs_aead) for the AEAD unwind path so the unregister helper
iterates over the same table that was registered. Also clarify the nearby
comment: the crypto registration helpers clean up algorithms registered
within the same call, while this function must still unwind earlier
successful registration steps. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix SCMI device destroy lifetimes
scmi_child_dev_find() drops the reference returned by
device_find_child() before returning the scmi_device pointer. A
concurrent unregister can then release the device while the destroy path
is still using the returned pointer.
Make the lookup helper return the device_find_child() reference and keep
it until scmi_device_destroy() has finished unregistering the child.
Also split device_unregister() in __scmi_device_destroy() so the SCMI bus
ID is not made reusable until after device_del() has removed the old
scmi_dev.N name from sysfs. This avoids a new SCMI device reusing the
same ID while the old device is still registered.
The final device release callback is also a possible cleanup path when
SCMI children are deleted by driver core recursion rather than
__scmi_device_destroy(). Release the SCMI bus ID from a common helper
used by destroy, register-failure and final-release paths, and clear
scmi_dev->id after freeing it so the final release cannot free the same
ID again. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Only fini scheduler after successful init
msm_ringbuffer_new() destroys a partially initialized ring through
msm_ringbuffer_destroy() when an allocation or scheduler setup step
fails.
If drm_sched_init() fails before it finishes initializing the scheduler,
the failure path still calls drm_sched_fini(). That teardown path assumes
the scheduler work items, lists, and workqueue state were initialized.
Track successful scheduler initialization and call drm_sched_fini() only
after drm_sched_init() returned 0.
This issue was found by a static analysis checker and confirmed by
manual source review.
Patchwork: https://patchwork.freedesktop.org/patch/738905/ |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1: create serial pool adding rdev to array with serialize_policy=1
The following bug has been observed with kernel 7.1.3 after adding a new
rdev to an existing RAID1 array with serialize_policy enabled:
Oops: 0002 [#1]
CPU: 0 UID: 0 PID: 19639 Comm: ext4lazyinit Not tainted 7.1.3-1-default
RIP: _raw_spin_lock_irqsave+0x27/0x50
CR2: 0000000000004960
Call Trace:
wait_for_serialization+0xb9/0x260 [raid1]
raid1_make_request+0x762/0xaff [raid1]
md_handle_request+0x1c9/0x2e0 [md_mod]
The raid1.c code calls wait_for_serialization() if the MD_SERIALIZE_POLICY
is set, and wait_for_serialization assumes that rdev->serial is
initialized. Normally this will be the case for arrays that have
the serialize_policy sysfs attribute set to 1.
But when a new rdev is added to an existing array in bind_rdev_to_array(),
the condition at mddev_create_serial_pool() causes creation of rdev->serial
to be skipped. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: unwind state on add_interface failure
When mt76_wcid_alloc() fails, mt7915_add_interface() returned without
clearing the vif_mask/omac_mask bits it had already set, without removing
the firmware dev info added earlier, and without clearing a monitor_vif
pointer to the vif mac80211 is about to free. mac80211 does not call
remove_interface() for a failed add, so the indices and firmware dev
entry leaked permanently and testmode could dereference the stale
monitor_vif. Add a proper error unwind. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: hwmon: Remove hwmon class device along with its parent
The current code creates one hwmon device per thermal zone type and that
device is registered under the first thermal zone of the given type.
That turns out to be problematic when the thermal zone holding the
hwmon device is removed.
For example, say that there are two ACPI thermal zones on a system
/sys/devices/virtual/thermal/thermal_zone0/
/sys/devices/virtual/thermal/thermal_zone1/
The current code registers a hwmon class device for thermal_zone0 only:
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/
because the type is "acpitz" for both of them, but it adds a sysfs
attribute that belongs to thermal_zone1 under it:
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp2_input
There is also
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp1_input
which belongs to thermal_zone0.
When thermal_zone0 is removed, say because the ACPI thermal driver is
unbound from the underlying platform device, thermal_remove_hwmon_sysfs()
skips the removal of hwmon0 because of the temp2_input attribute
belonging to thermal_zone1 which effectively prevents thermal_zone0
removal from making progress.
Address this by making thermal_remove_hwmon_sysfs() remove the entire
hwmon class device interface for the given thermal zone type when the
thermal zone device holding it is removed.
To prevent races with thermal_add_hwmon_sysfs() that may interfere
with this, carry out the entire addition and removal of hwmon sysfs
interfaces for thermal zones under thermal_hwmon_list_lock.
Also adjust the layout of the labels in thermal_add_hwmon_sysfs() to
the current kernel coding style to align with the new "unlock" label. |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: etm4x: missing cscfg_csdev_disable_active_config() in perf enable
In the perf enable path, there are missing cases where
cscfg_csdev_disable_active_config() is not called:
- Branch broadcast is selected but not supported by the hardware
- etm4_enable_hw() fails
This can lead to a leak of config_desc->active_cnt.
Fix this by properly calling cscfg_csdev_disable_active_config()
in these error paths. |
