| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| smol-toml is a small, fast, and correct TOML parser and serializer. Prior to 1.7.1, parse() can enter an infinite loop when a value inside an array or inline table is followed by a comment with no trailing newline. In src/util.ts, skipUntil() calls indexOfNewline(), receives -1 at the end of input, and resets the cursor to the beginning of the string instead of leaving the structure scan. The parser then hangs indefinitely and can consume a service's processing capacity when an application parses attacker-controlled TOML. This issue is fixed in version 1.7.1. |
| IBM App Connect Enterprise 13.0.1.0 through 13.0.8.1, and 12.0.1.0 through 12.0.12.28 and IBM Integration Bus for z/OS 10.1.0.0 through 10.1.0.7 could allow a remote attacker to cause a denial of service due to an infinite loop. |
| When processing HTTP/2 SETTINGS frames, transport will enter an infinite loop of writing CONTINUATION frames if it receives a SETTINGS_MAX_FRAME_SIZE with a value of 0. |
| @fastify/busboy is a multipart form-data parser. In versions 3.1.0 through 3.2.0, a remote unauthenticated attacker can stall the Node.js event loop by sending a multipart request whose boundary is crafted to a specific length. The vendored streaming search stores its skip table in a fixed 256 entry byte array, and a boundary of exactly 252 bytes makes the search needle 256 bytes, which truncates the default skip distance to zero and turns the search into a CPU bound loop on a small body. A single small request can keep one core busy and deny service to other requests handled by the same process. The issue is fixed in @fastify/busboy 3.2.1, which widens the skip table so the skip distance is preserved. Users should upgrade to 3.2.1. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: digi_acceleport: fix hard lockup on disconnect
If submitting the OOB write urb fails persistently (e.g if the device is
being disconnected) the driver would loop indefinitely with interrupts
disabled.
Check for urb submission errors when sending OOB commands to avoid
hanging if, for example, open(), set_termios() or close() races with a
physical disconnect.
This is issue was flagged by Sashiko when reviewing an unrelated change
to the driver. |
| An attacker who can publish to a queue consumed by an application that has enabled message decompression can crash the consumer JVM with a single ~1 MB message.
Spring AMQP 4.1.0
Spring AMQP 4.0.0 - 4.0.4
Spring AMQP 3.2.0 - 3.2.12
Spring AMQP 2.4.18 and earlier |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.16.0, an attacker can craft a PDF whose cyclic tree structure causes pypdf/generic/_data_structures.py TreeObject.insert_child to follow /Next links indefinitely when a writing code path inserts a child, producing an infinite loop. This issue is fixed in version 6.16.0. |
| In Reactor Core, applications that use the Flux.bufferTimeout operator with fairBackpressure enabled are vulnerable to a Denial of Service (DoS) condition.
Reactor Core 3.8.0 - 3.8.6
Reactor Core 3.7.19 and earlier |
| js-yaml is a JavaScript YAML parser and dumper. From 3.0.0 until 3.15.2 and 4.3.2, maxTotalMergeKeys in lib/js-yaml/loader.js and lib/loader.js does not count empty mapping sources while processing the merge key <<. An attacker can alias a large sequence of empty mappings into many merge targets, causing O(N * K) processing while totalMergeKeys remains unchanged and the configured resource limit is never reached. A relatively small YAML document can therefore cause prolonged CPU consumption in applications that parse untrusted YAML, and merge processing is enabled by default on these release lines. This issue is fixed in versions 3.15.2 and 4.3.2. |
| A flaw was found in libssh. A remote authenticated peer can advertise a zero maximum packet size in SSH_MSG_CHANNEL_OPEN, causing later channel writes to loop indefinitely and consume CPU, leading to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wlcore: enable the right set of ciphers
The firmware version number check for IGTK introduced in
commit c34dbc5900b0 ("wifi: wlcore: Add support for IGTK key")
lets the amount of ciphers decrease on every boot of a too old firmware and
that is practically happening. It also does not take into account other
chips than the wl18xx. On some wl128x, the following can be observed
when connecting via nm to a common ap:
[ 484.113311] wlcore: WARNING could not set keys
[ 484.117828] wlcore: ERROR Could not add or replace key
[ 484.123016] wlan0: failed to set key (5, ff:ff:ff:ff:ff:ff) to hardware (-5)
[ 484.123046] wlcore: Hardware recovery in progress. FW ver: Rev 7.3.10.0.142
[ 484.139923] wlcore: pc: 0x0, hint_sts: 0x00000048 count: 1
[ 484.145721] wlcore: down
[ 484.148986] ieee80211 phy0: Hardware restart was requested
[ 484.610473] wlcore: firmware booted (Rev 7.3.10.0.142)
[ 484.633758] wlcore: Association completed.
[ 484.690490] wlcore: ERROR command execute failure 14
[ 484.690490] ------------[ cut here ]------------
[ 484.700195] WARNING: drivers/net/wireless/ti/wlcore/main.c:872 at wl12xx_queue_recovery_work+0x64/0x74 [wlcore], CPU#0: kworker/0:0/892
This repeats endlessly.
Always disable IGTK on wl12xx and fix the decrementing mess. |
| In the Linux kernel, the following vulnerability has been resolved:
igc: remove napi_synchronize() in igc_down()
When an AF_XDP zero-copy application is killed abruptly, the XSK pool is
torn down but NAPI keeps polling. igc_clean_rx_irq_zc() then returns the
full budget on every poll, so napi_complete_done() never clears
NAPI_STATE_SCHED.
igc_down() calls napi_synchronize() before napi_disable(), so it spins
forever waiting for that bit and the interface never goes down. Drop the
napi_synchronize() and let napi_disable() do the job -- it sets
NAPI_STATE_DISABLE, which forces the stuck poll to complete. Reorder it
ahead of igc_set_queue_napi() so the NAPI mapping is cleared only after
polling has stopped, matching the recent igb fix b1e067240379. |
| An unauthenticated attacker can send a truncated quoted argument to the ManageSieve login process, which makes it spin in an infinite loop consuming CPU. This can cause degradation or denial of service for Sieve script management, and repeated connections can consume all available CPU on the server. Monitor system for abnormal CPU usage and kill the offending process. Restrict network access to the ManageSieve service to trusted clients. Update to non-vulnerable version. No publicly available exploits are known. |
| A vulnerability has been found in BareBones BBEdit up to 15.5.5. The affected element is an unknown function of the component Lasso Language Tokenizer. Such manipulation leads to infinite loop. The attack can be executed remotely. Upgrading to version 16.0 is sufficient to fix this issue. The affected component should be upgraded. |
| A flaw was found in glibc. A remote attacker could exploit this vulnerability by providing specially crafted input during SHIFT_JISX0213 to UCS-4 text conversion. This crafted input can cause the application to repeatedly emit a buffered code point without consuming further input, leading to persistent retry churn. This can result in a denial of service (DoS) for callers converting untrusted text. |
| A flaw was found in glibc. This vulnerability allows a remote attacker to cause a denial of service (DoS) by providing specially crafted text to an application that converts text from SHIFT_JISX0213 to UCS-4. The crafted input can lead to a continuous loop of processing, preventing the application from making progress and consuming resources. Exploitation requires specific conditions, including the application retrying conversion after an error with limited output space. |
| A flaw was identified in the RAR5 archive decompression logic of the libarchive library, specifically within the archive_read_data() processing path. When a specially crafted RAR5 archive is processed, the decompression routine may enter a state where internal logic prevents forward progress. This condition results in an infinite loop that continuously consumes CPU resources. Because the archive passes checksum validation and appears structurally valid, affected applications cannot detect the issue before processing. This can allow attackers to cause persistent denial-of-service conditions in services that automatically process archives. |
| Loop with Unreachable Exit Condition (Infinite Loop) vulnerability in ash-project ash_ai allows an attacker who can influence a model's output to hang the tool loop and drive unbounded, repeated model requests.
AshAi.ToolLoop classifies a model response of :tool_calls, then filters the calls through normalize_tool_calls/2 and unprocessed_tool_calls/2. Both can empty the list: a call missing a valid name, or one reusing a tool_call_id that already has a result in history, is dropped. With an empty list the loop appended nothing and recursed with a byte-identical message list, so the conversation never advanced and the same request was re-sent every iteration. Under the supported max_iterations: :infinity this never terminated; otherwise it exhausted the full budget. Prompt-injected content can make the model re-emit a spent tool_call_id. The fix treats an empty post-filter list as terminal.
This issue affects ash_ai: from 0.6.0 before 1.0.0. |
| GitLab has remediated an issue in GitLab EE affecting all versions from 11.10 before 19.1.7, 19.2 before 19.2.5, and 19.3 before 19.3.1 that, under certain conditions, an authenticated user could have caused denial of service, due to an unbounded loop triggered by specially crafted input in the SCIM user provisioning feature. |
| A vulnerability was identified in bytebot-ai bytebot 0.0.1. The affected element is an unknown function of the component Agent Execution Workflow. Such manipulation leads to infinite loop. The attack may be performed from remote. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer. |
