| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: avoid reading the written value in offsets array
When sending a transaction, its offsets array is first copied into the
target proc's vma, and then the values are read back from there. This is
normally fine because the vma is a read-only mapping, so the target
process cannot change the value under us.
However, if the target process somehow gains the ability to write to its
own vma, it could change the offset before it's read back, causing the
kernel to misinterpret what the sender meant. If the sender happens to
send a payload with a specific shape, this could in the worst case lead
to the receiver being able to privilege escalate into the sender.
The intent is that gaining the ability to change the read-only vma of
your own process should not be exploitable, so remove this TOCTOU read
even though it's unexploitable without another Binder bug. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: check ownership before using vma
When installing missing pages (or zapping them), Rust Binder will look
up the vma in the mm by address, and then call vm_insert_page (or
zap_page_range_single). However, if the vma is closed and replaced with
a different vma at the same address, this can lead to Rust Binder
installing pages into the wrong vma.
By installing the page into a writable vma, it becomes possible to write
to your own binder pages, which are normally read-only. Although you're
not supposed to be able to write to those pages, the intent behind the
design of Rust Binder is that even if you get that ability, it should not
lead to anything bad. Unfortunately, due to another bug, that is not the
case.
To fix this, store a pointer in vm_private_data and check that the vma
returned by vma_lookup() has the right vm_ops and vm_private_data before
trying to use the vma. This should ensure that Rust Binder will refuse
to interact with any other VMA. The plan is to introduce more vma
abstractions to avoid this unsafe access to vm_ops and vm_private_data,
but for now let's start with the simplest possible fix.
C Binder performs the same check in a slightly different way: it
provides a vm_ops->close that sets a boolean to true, then checks that
boolean after calling vma_lookup(), but this is more fragile
than the solution in this patch. (We probably still want to do both, but
the vm_ops->close callback will be added later as part of the follow-up
vma API changes.)
It's still possible to remap the vma so that pages appear in the right
vma, but at the wrong offset, but this is a separate issue and will be
fixed when Rust Binder gets a vm_ops->close callback. |
| Mattermost versions 11.6.x <= 11.6.0, 11.5.x <= 11.5.3, 11.4.x <= 11.4.4, 10.11.x <= 10.11.14 fail to archive the channel before removing persistent notifications which allows authenticated user to crash the server via timing the creation of persistent notification message between the server deleting existing persistent notifications and archiving the channel.. Mattermost Advisory ID: MMSA-2026-00637 |
| A time-of-check time-of-use vulnerability in the Apex One/SEP agent could allow a local attacker to escalate privileges on affected installations.
Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. |
| Rsync version 3.4.2 and prior contain symlink race condition vulnerabilities in path-based system calls including chmod, lchown, utimes, rename, unlink, mkdir, symlink, mknod, link, rmdir, and lstat that allow local attackers to redirect operations to files outside the exported rsync module. Attackers with local filesystem access can exploit the timing window between path resolution and syscall execution by swapping symlinks to apply sender-supplied permissions, ownership, timestamps, or filenames to arbitrary files outside the intended module boundary on rsync daemons configured with 'use chroot = no'. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Fix SError in ufshcd_rtc_work() during UFS suspend
In __ufshcd_wl_suspend(), cancel_delayed_work_sync() is called to cancel
the UFS RTC work, but it is placed after ufshcd_vops_suspend(hba, pm_op,
POST_CHANGE). This creates a race condition where ufshcd_rtc_work() can
still be running while ufshcd_vops_suspend() is executing. When
UFSHCD_CAP_CLK_GATING is not supported, the condition
!hba->clk_gating.active_reqs is always true, causing ufshcd_update_rtc()
to be executed. Since ufshcd_vops_suspend() typically performs clock
gating operations, executing ufshcd_update_rtc() at that moment triggers
an SError. The kernel panic trace is as follows:
Kernel panic - not syncing: Asynchronous SError Interrupt
Call trace:
dump_backtrace+0xec/0x128
show_stack+0x18/0x28
dump_stack_lvl+0x40/0xa0
dump_stack+0x18/0x24
panic+0x148/0x374
nmi_panic+0x3c/0x8c
arm64_serror_panic+0x64/0x8c
do_serror+0xc4/0xc8
el1h_64_error_handler+0x34/0x4c
el1h_64_error+0x68/0x6c
el1_interrupt+0x20/0x58
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x68/0x6c
ktime_get+0xc4/0x12c
ufshcd_mcq_sq_stop+0x4c/0xec
ufshcd_mcq_sq_cleanup+0x64/0x1dc
ufshcd_clear_cmd+0x38/0x134
ufshcd_issue_dev_cmd+0x298/0x4d0
ufshcd_exec_dev_cmd+0x1a4/0x1c4
ufshcd_query_attr+0xbc/0x19c
ufshcd_rtc_work+0x10c/0x1c8
process_scheduled_works+0x1c4/0x45c
worker_thread+0x32c/0x3e8
kthread+0x120/0x1d8
ret_from_fork+0x10/0x20
Fix this by moving cancel_delayed_work_sync() before the call to
ufshcd_vops_suspend(hba, pm_op, PRE_CHANGE), ensuring the UFS RTC work is
fully completed or cancelled at that point. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix runtime suspend deadlock when there is pending job
The runtime suspend callback drains the running job workqueue before
suspending the device. If a job is still executing and calls
pm_runtime_resume_and_get(), it can deadlock with the runtime suspend
path.
Fix this by moving pm_runtime_resume_and_get() from the job execution
routine to the job submission routine, ensuring the device is resumed
before the job is queued and avoiding the deadlock during runtime
suspend. |
| Use after free in DOM in Google Chrome on prior to 148.0.7778.179 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Undefined behavior may result due to a race condition leading to a use-after-free violation. If BIND receives an incoming DNS message signed with SIG(0), it begins work to validate that signature. If, during that validation, the "recursive-clients" limit is reached (as would occur during a query flood), and that same DNS message is discarded per the limit, there is a brief window of time while the SIG(0) validation may attempt to read the now-discarded DNS message.
This issue affects BIND 9 versions 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, and 9.20.9-S1 through 9.20.22-S1.
BIND 9 versions 9.18.28 through 9.18.49 and 9.18.28-S1 through 9.18.49-S1 are NOT affected. |
| In the Linux kernel, the following vulnerability has been resolved:
nfs: return EISDIR on nfs3_proc_create if d_alias is a dir
If we found an alias through nfs3_do_create/nfs_add_or_obtain
/d_splice_alias which happens to be a dir dentry, we don't return
any error, and simply forget about this alias, but the original
dentry we were adding and passed as parameter remains negative.
This later causes an oops on nfs_atomic_open_v23/finish_open since we
supply a negative dentry to do_dentry_open.
This has been observed running lustre-racer, where dirs and files are
created/removed concurrently with the same name and O_EXCL is not
used to open files (frequent file redirection).
While d_splice_alias typically returns a directory alias or NULL, we
explicitly check d_is_dir() to ensure that we don't attempt to perform
file operations (like finish_open) on a directory inode, which triggers
the observed oops. |
| A time-of-check time-of-use (TOCTOU) condition in the ad_flush function in Netatalk 3.0.0 through 4.4.2 involves root-privileged file operations, which may allow a remote attacker to cause limited data modification under specific race conditions. |
| A race condition in the privilege toggle mechanism in Netatalk 2.2.5 through 4.4.2 allows a local attacker to obtain limited information, modify limited data, or cause a minor service disruption. |
| NLnet Labs Unbound 1.14.0 up to and including version 1.25.0 has a locking inconsistency vulnerability that when certain conditions are met (multi-threaded, RPZ XFR reload, RPZ zone with 'rpz-nsip'/'rpz-nsdname' triggers) it could result in heap use-after-free and eventual crash. An adversary can exploit the vulnerability if conditions are first met on a vulnerable Unbound, i.e., multi-threaded, an RPZ zone with 'rpz-nsip'/'rpz-nsdname' triggers and an ongoing XFR for that RPZ zone. Local RPZ files do not trigger the vulnerability. If the timing is right and an XFR happens at the same time another thread needs to read that RPZ zone, the reader may not hold the lock long enough and the thread applying the XFR may free objects that the reader is about to walk causing the use-after-free. Unbound 1.25.1 contains a patch with a fix to the locking code. |
| Use after free in Windows Cloud Files Mini Filter Driver allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: renesas_usbhs: fix use-after-free in ISR during device removal
In usbhs_remove(), the driver frees resources (including the pipe array)
while the interrupt handler (usbhs_interrupt) is still registered. If an
interrupt fires after usbhs_pipe_remove() but before the driver is fully
unbound, the ISR may access freed memory, causing a use-after-free.
Fix this by calling devm_free_irq() before freeing resources. This ensures
the interrupt handler is both disabled and synchronized (waits for any
running ISR to complete) before usbhs_pipe_remove() is called. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: yurex: fix race in probe
The bbu member of the descriptor must be set to the value
standing for uninitialized values before the URB whose
completion handler sets bbu is submitted. Otherwise there is
a window during which probing can overwrite already retrieved
data. |
| In the Linux kernel, the following vulnerability has been resolved:
mctp: route: hold key->lock in mctp_flow_prepare_output()
mctp_flow_prepare_output() checks key->dev and may call
mctp_dev_set_key(), but it does not hold key->lock while doing so.
mctp_dev_set_key() and mctp_dev_release_key() are annotated with
__must_hold(&key->lock), so key->dev access is intended to be
serialized by key->lock. The mctp_sendmsg() transmit path reaches
mctp_flow_prepare_output() via mctp_local_output() -> mctp_dst_output()
without holding key->lock, so the check-and-set sequence is racy.
Example interleaving:
CPU0 CPU1
---- ----
mctp_flow_prepare_output(key, devA)
if (!key->dev) // sees NULL
mctp_flow_prepare_output(
key, devB)
if (!key->dev) // still NULL
mctp_dev_set_key(devB, key)
mctp_dev_hold(devB)
key->dev = devB
mctp_dev_set_key(devA, key)
mctp_dev_hold(devA)
key->dev = devA // overwrites devB
Now both devA and devB references were acquired, but only the final
key->dev value is tracked for release. One reference can be lost,
causing a resource leak as mctp_dev_release_key() would only decrease
the reference on one dev.
Fix by taking key->lock around the key->dev check and
mctp_dev_set_key() call. |
| The adjustments made for XSA-379 as well as those subsequently becoming
XSA-387 still left a race window, when a HVM or PVH guest does a grant
table version change from v2 to v1 in parallel with mapping the status
page(s) via XENMEM_add_to_physmap. Some of the status pages may then be
freed while mappings of them would still be inserted into the guest's
secondary (P2M) page tables. |
| An issue was discovered in GStreamer gst-plugins-good before 1.28.2. When parsing MP4 audio tracks, the isomp4 plugin's qtdemux_audio_caps function does not sufficiently validate atom data before performing division operations, leading to denial of service due to integer division by zero. |
| An issue was discovered in GStreamer gst-plugins-good before 1.28.2. When parsing MP4 audio tracks, the isomp4 plugin's qtdemux_parse_trak function does not sufficiently validate atom data before performing division operations, leading to denial of service due to integer division by zero. |
