| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Inject #UD for INVLPGA if EFER.SVME=0
INVLPGA should cause a #UD when EFER.SVME is not set. Add a check to
properly inject #UD when EFER.SVME=0.
[sean: tag for stable@] |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: split transactions in dio completion to avoid credit exhaustion
During ocfs2 dio operations, JBD2 may report warnings via following
call trace:
ocfs2_dio_end_io_write
ocfs2_mark_extent_written
ocfs2_change_extent_flag
ocfs2_split_extent
ocfs2_try_to_merge_extent
ocfs2_extend_rotate_transaction
ocfs2_extend_trans
jbd2__journal_restart
start_this_handle
output: JBD2: kworker/6:2 wants too many credits credits:5450 rsv_credits:0 max:5449
To prevent exceeding the credits limit, modify ocfs2_dio_end_io_write() to
handle extents in a batch of transaction.
Additionally, relocate ocfs2_del_inode_from_orphan(). The orphan inode
should only be removed from the orphan list after the extent tree update
is complete. This ensures that if a crash occurs in the middle of extent
tree updates, we won't leave stale blocks beyond EOF.
This patch also changes the logic for updating the inode size and removing
orphan, making it similar to ext4_dio_write_end_io(). Both operations are
performed only when everything looks good.
Finally, thanks to Jans and Joseph for providing the bug fix prototype and
suggestions. |
| In the Linux kernel, the following vulnerability has been resolved:
rbd: fix null-ptr-deref when device_add_disk() fails
do_rbd_add() publishes the device with device_add() before calling
device_add_disk(). If device_add_disk() fails after device_add()
succeeds, the error path calls rbd_free_disk() directly and then later
falls through to rbd_dev_device_release(), which calls rbd_free_disk()
again. This double teardown can leave blk-mq cleanup operating on
invalid state and trigger a null-ptr-deref in
__blk_mq_free_map_and_rqs(), reached from blk_mq_free_tag_set().
Fix this by following the normal remove ordering: call device_del()
before rbd_dev_device_release() when device_add_disk() fails after
device_add(). That keeps the teardown sequence consistent and avoids
re-entering disk cleanup through the wrong path.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available.
We reproduced the bug on v7.0 with a real Ceph backend and a QEMU x86_64
guest booted with KASAN and CONFIG_FAILSLAB enabled. The reproducer
confines failslab injections to the __add_disk() range and injects
fail-nth while mapping an RBD image through
/sys/bus/rbd/add_single_major.
On the unpatched kernel, fail-nth=4 reliably triggered the fault:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 UID: 0 PID: 273 Comm: bash Not tainted 7.0.0-01247-gd60bc1401583 #6 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:__blk_mq_free_map_and_rqs+0x8c/0x240
Code: 00 00 48 8b 6b 60 41 89 f4 49 c1 e4 03 4c 01 e5 45 85 ed 0f 85 0a 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 e9 48 c1 e9 03 <80> 3c 01 00 0f 85 31 01 00 00 4c 8b 6d 00 4d 85 ed 0f 84 e2 00 00
RSP: 0018:ff1100000ab0fac8 EFLAGS: 00000246
RAX: dffffc0000000000 RBX: ff1100000c4806a0 RCX: 0000000000000000
RDX: 0000000000000002 RSI: 0000000000000000 RDI: ff1100000c4806f4
RBP: 0000000000000000 R08: 0000000000000001 R09: ffe21c000189001b
R10: ff1100000c4800df R11: ff1100006cf37be0 R12: 0000000000000000
R13: 0000000000000000 R14: ff1100000c480700 R15: ff1100000c480004
FS: 00007f0fbe8fe740(0000) GS:ff110000e5851000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe53473b2e0 CR3: 0000000012eef000 CR4: 00000000007516f0
PKRU: 55555554
Call Trace:
<TASK>
blk_mq_free_tag_set+0x77/0x460
do_rbd_add+0x1446/0x2b80
? __pfx_do_rbd_add+0x10/0x10
? lock_acquire+0x18c/0x300
? find_held_lock+0x2b/0x80
? sysfs_file_kobj+0xb6/0x1b0
? __pfx_sysfs_kf_write+0x10/0x10
kernfs_fop_write_iter+0x2f4/0x4a0
vfs_write+0x98e/0x1000
? expand_files+0x51f/0x850
? __pfx_vfs_write+0x10/0x10
ksys_write+0xf2/0x1d0
? __pfx_ksys_write+0x10/0x10
do_syscall_64+0x115/0x690
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f0fbea15907
Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007ffe22346ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000058 RCX: 00007f0fbea15907
RDX: 0000000000000058 RSI: 0000563ace6c0ef0 RDI: 0000000000000001
RBP: 0000563ace6c0ef0 R08: 0000563ace6c0ef0 R09: 6b6435726d694141
R10: 5250337279762f78 R11: 0000000000000246 R12: 0000000000000058
R13: 00007f0fbeb1c780 R14: ff1100000c480700 R15: ff1100000c480004
</TASK>
With this fix applied, rerunning the reproducer over fail-nth=1..256
yields no KASAN reports.
[ idryomov: rename err_out_device_del -> err_out_device ] |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Avoid clearing VMCB_LBR in vmcb12
svm_copy_lbrs() always marks VMCB_LBR dirty in the destination VMCB.
However, nested_svm_vmexit() uses it to copy LBRs to vmcb12, and
clearing clean bits in vmcb12 is not architecturally defined.
Move vmcb_mark_dirty() to callers and drop it for vmcb12.
This also facilitates incoming refactoring that does not pass the entire
VMCB to svm_copy_lbrs(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: fix use-after-free in mwifiex_adapter_cleanup()
The mwifiex_adapter_cleanup() function uses timer_delete()
(non-synchronous) for the wakeup_timer before the adapter structure is
freed. This is incorrect because timer_delete() does not wait for any
running timer callback to complete.
If the wakeup_timer callback (wakeup_timer_fn) is executing when
mwifiex_adapter_cleanup() is called, the callback will continue to
access adapter fields (adapter->hw_status, adapter->if_ops.card_reset,
etc.) which may be freed by mwifiex_free_adapter() called later in the
mwifiex_remove_card() path.
Use timer_delete_sync() instead to ensure any running timer callback has
completed before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: nx - fix bounce buffer leaks in nx842_crypto_{alloc,free}_ctx
The bounce buffers are allocated with __get_free_pages() using
BOUNCE_BUFFER_ORDER (order 2 = 4 pages), but both the allocation error
path and nx842_crypto_free_ctx() release the buffers with free_page().
Use free_pages() with the matching order instead. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix num_ops off-by-one when crypto allocation fails
move_dirty_folio_in_page_array() may fail if the file is encrypted, the
dirty folio is not the first in the batch, and it fails to allocate a
bounce buffer to hold the ciphertext. When that happens,
ceph_process_folio_batch() simply redirties the folio and flushes the
current batch -- it can retry that folio in a future batch.
However, if this failed folio is not contiguous with the last folio that
did make it into the batch, then ceph_process_folio_batch() has already
incremented `ceph_wbc->num_ops`; because it doesn't follow through and
add the discontiguous folio to the array, ceph_submit_write() -- which
expects that `ceph_wbc->num_ops` accurately reflects the number of
contiguous ranges (and therefore the required number of "write extent"
ops) in the writeback -- will panic the kernel:
BUG_ON(ceph_wbc->op_idx + 1 != req->r_num_ops);
This issue can be reproduced on affected kernels by writing to
fscrypt-enabled CephFS file(s) with a 4KiB-written/4KiB-skipped/repeat
pattern (total filesize should not matter) and gradually increasing the
system's memory pressure until a bounce buffer allocation fails.
Fix this crash by decrementing `ceph_wbc->num_ops` back to the correct
value when move_dirty_folio_in_page_array() fails, but the folio already
started counting a new (i.e. still-empty) extent.
The defect corrected by this patch has existed since 2022 (see first
`Fixes:`), but another bug blocked multi-folio encrypted writeback until
recently (see second `Fixes:`). The second commit made it into 6.18.16,
6.19.6, and 7.0-rc1, unmasking the panic in those versions. This patch
therefore fixes a regression (panic) introduced by cac190c7674f. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/shstk: Prevent deadlock during shstk sigreturn
During sigreturn the shadow stack signal frame is popped. The kernel does
this by reading the shadow stack using normal read accesses. When it can't
assume the memory is shadow stack, it takes extra steps to makes sure it is
reading actual shadow stack memory and not other normal readable memory. It
does this by holding the mmap read lock while doing the access and checking
the flags of the VMA.
Unfortunately that is not safe. If the read of the shadow stack sigframe
hits a page fault, the fault handler will try to recursively grab another
mmap read lock. This normally works ok, but if a writer on another CPU is
also waiting, the second read lock could fail and cause a deadlock.
Fix this by not holding mmap lock during the read access to userspace.
Instead use mmap_lock_speculate_...() to watch for changes between dropping
mmap lock and the userspace access. Retry if anything grabbed an mmap write
lock in between and could have changed the VMA.
These mmap_lock_speculate_...() helpers use mm::mm_lock_seq, which is only
available when PER_VMA_LOCK is configured. So make X86_USER_SHADOW_STACK
depend on it. On x86, PER_VMA_LOCK is a default configuration for SMP
kernels. So drop support for the other configs under the assumption that
the !SMP shadow stack user base does not exist.
Currently there is a check that skips the lookup work when the SSP can be
assumed to be on a shadow stack. While reorganizing the function, remove
the optimization to make the tricky code flows more common, such that
issues like this cannot escape detection for so long. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - fix IRQ cleanup on 6xxx probe failure
When adf_dev_up() partially completes and then fails, the IRQ
handlers registered during adf_isr_resource_alloc() are not detached
before the MSI-X vectors are released.
Since the device is enabled with pcim_enable_device(), calling
pci_alloc_irq_vectors() internally registers pcim_msi_release() as a
devres action. On probe failure, devres runs pcim_msi_release() which
calls pci_free_irq_vectors(), tearing down the MSI-X vectors while IRQ
handlers (for example 'qat0-bundle0') are still attached. This causes
remove_proc_entry() warnings:
[ 22.163964] remove_proc_entry: removing non-empty directory 'irq/143', leaking at least 'qat0-bundle0'
Moving the devm_add_action_or_reset() before adf_dev_up() does not solve
the problem since devres runs in LIFO order and pcim_msi_release(),
registered later inside adf_dev_up(), would still fire before
adf_device_down().
Fix by calling adf_dev_down() explicitly when adf_dev_up() fails, to
properly free IRQ handlers before devres releases the MSI-X vectors. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Always use NextRIP as vmcb02's NextRIP after first L2 VMRUN
For guests with NRIPS disabled, L1 does not provide NextRIP when running
an L2 with an injected soft interrupt, instead it advances the current RIP
before running it. KVM uses the current RIP as the NextRIP in vmcb02 to
emulate a CPU without NRIPS.
However, after L2 runs the first time, NextRIP will be updated by the CPU
and/or KVM, and the current RIP is no longer the correct value to use in
vmcb02. Hence, after save/restore, use the current RIP if and only if a
nested run is pending, otherwise use NextRIP. Give soft_int_next_rip the
same treatment, as it's the same logic, just for a narrower use case.
[sean: give soft_int_next_rip the same treatment] |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: fix soft lockup in retry_aligned_read()
When retry_aligned_read() encounters an overlapped stripe, it releases
the stripe via raid5_release_stripe() which puts it on the lockless
released_stripes llist. In the next raid5d loop iteration,
release_stripe_list() drains the stripe onto handle_list (since
STRIPE_HANDLE is set by the original IO), but retry_aligned_read()
runs before handle_active_stripes() and removes the stripe from
handle_list via find_get_stripe() -> list_del_init(). This prevents
handle_stripe() from ever processing the stripe to resolve the
overlap, causing an infinite loop and soft lockup.
Fix this by using __release_stripe() with temp_inactive_list instead
of raid5_release_stripe() in the failure path, so the stripe does not
go through the released_stripes llist. This allows raid5d to break out
of its loop, and the overlap will be resolved when the stripe is
eventually processed by handle_stripe(). |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix deadlock with check operation and nowait requests
When an array check is running it will raise the barrier at which point
normal requests will become blocked and increment the nr_pending value to
signal there is work pending inside of wait_barrier(). NOWAIT requests
do not block and so will return immediately with an error, and additionally
do not increment nr_pending in wait_barrier(). Upstream change commit
43806c3d5b9b ("raid10: cleanup memleak at raid10_make_request") added a
call to raid_end_bio_io() to fix a memory leak when NOWAIT requests hit
this condition. raid_end_bio_io() eventually calls allow_barrier() and
it will unconditionally do an atomic_dec_and_test(&conf->nr_pending) even
though the corresponding increment on nr_pending didn't happen in the
NOWAIT case.
This can be easily seen by starting a check operation while an application
is doing nowait IO on the same array. This results in a deadlocked state
due to nr_pending value underflowing and so the md resync thread gets stuck
waiting for nr_pending to == 0.
Output of r10conf state of the array when we hit this condition:
crash> struct r10conf
barrier = 1,
nr_pending = {
counter = -41
},
nr_waiting = 15,
nr_queued = 0,
Example of md_sync thread stuck waiting on raise_barrier() and other
requests stuck in wait_barrier():
md1_resync
[<0>] raise_barrier+0xce/0x1c0
[<0>] raid10_sync_request+0x1ca/0x1ed0
[<0>] md_do_sync+0x779/0x1110
[<0>] md_thread+0x90/0x160
[<0>] kthread+0xbe/0xf0
[<0>] ret_from_fork+0x34/0x50
[<0>] ret_from_fork_asm+0x1a/0x30
kworker/u1040:2+flush-253:4
[<0>] wait_barrier+0x1de/0x220
[<0>] regular_request_wait+0x30/0x180
[<0>] raid10_make_request+0x261/0x1000
[<0>] md_handle_request+0x13b/0x230
[<0>] __submit_bio+0x107/0x1f0
[<0>] submit_bio_noacct_nocheck+0x16f/0x390
[<0>] ext4_io_submit+0x24/0x40
[<0>] ext4_do_writepages+0x254/0xc80
[<0>] ext4_writepages+0x84/0x120
[<0>] do_writepages+0x7a/0x260
[<0>] __writeback_single_inode+0x3d/0x300
[<0>] writeback_sb_inodes+0x1dd/0x470
[<0>] __writeback_inodes_wb+0x4c/0xe0
[<0>] wb_writeback+0x18b/0x2d0
[<0>] wb_workfn+0x2a1/0x400
[<0>] process_one_work+0x149/0x330
[<0>] worker_thread+0x2d2/0x410
[<0>] kthread+0xbe/0xf0
[<0>] ret_from_fork+0x34/0x50
[<0>] ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Add fallback to default RSR for S/PDIF
spdif_passthru_playback_get_resources() uses atc->pll_rate as the RSR
for the MSR calculation loop. However, pll_rate is only updated in
atc_pll_init() and not in hw_pll_init(), so it remains 0 after the
card init.
When spdif_passthru_playback_setup() skips atc_pll_init() for
32000 Hz, (rsr * desc.msr) always becomes 0, causing the loop to spin
indefinitely.
Add fallback to use atc->rsr when atc->pll_rate is 0. This reflects
the hardware state, since hw_card_init() already configures the PLL
to the default RSR. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: ns: Fix use-after-free in driver remove()
In the remove callback, if a packet arrives after destroy_workqueue() is
called, but before sock_release(), the qrtr_ns_data_ready() callback will
try to queue the work, causing use-after-free issue.
Fix this issue by saving the default 'sk_data_ready' callback during
qrtr_ns_init() and use it to replace the qrtr_ns_data_ready() callback at
the start of remove(). This ensures that even if a packet arrives after
destroy_workqueue(), the work struct will not be dereferenced.
Note that it is also required to ensure that the RX threads are completed
before destroying the workqueue, because the threads could be using the
qrtr_ns_data_ready() callback. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix missing brelse() in ext4_xattr_inode_dec_ref_all()
The commit c8e008b60492 ("ext4: ignore xattrs past end")
introduced a refcount leak in when block_csum is false.
ext4_xattr_inode_dec_ref_all() calls ext4_get_inode_loc() to
get iloc.bh, but never releases it with brelse(). |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-llbitmap: skip reading rdevs that are not in_sync
When reading bitmap pages from member disks, the code iterates through
all rdevs and attempts to read from the first available one. However,
it only checks for raid_disk assignment and Faulty flag, missing the
In_sync flag check.
This can cause bitmap data to be read from spare disks that are still
being rebuilt and don't have valid bitmap information yet. Reading
stale or uninitialized bitmap data from such disks can lead to
incorrect dirty bit tracking, potentially causing data corruption
during recovery or normal operation.
Add the In_sync flag check to ensure bitmap pages are only read from
fully synchronized member disks that have valid bitmap data. |
| In the Linux kernel, the following vulnerability has been resolved:
inotify: fix watch count leak when fsnotify_add_inode_mark_locked() fails
When fsnotify_add_inode_mark_locked() fails in inotify_new_watch(),
the error path calls inotify_remove_from_idr() but does not call
dec_inotify_watches() to undo the preceding inc_inotify_watches().
This leaks a watch count, and repeated failures can exhaust the
max_user_watches limit with -ENOSPC even when no watches are active.
Prior to commit 1cce1eea0aff ("inotify: Convert to using per-namespace
limits"), the watch count was incremented after fsnotify_add_mark_locked()
succeeded, so this path was not affected. The conversion moved
inc_inotify_watches() before the mark insertion without adding the
corresponding rollback.
Add the missing dec_inotify_watches() call in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: ns: Free the node during ctrl_cmd_bye()
A node sends the BYE packet when it is about to go down. So the nameserver
should advertise the removal of the node to all remote and local observers
and free the node finally. But currently, the nameserver doesn't free the
node memory even after processing the BYE packet. This causes the node
memory to leak.
Hence, remove the node from Xarray list and free the node memory during
both success and failure case of ctrl_cmd_bye(). |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: authencesn - reject short ahash digests during instance creation
authencesn requires either a zero authsize or an authsize of at least
4 bytes because the ESN encrypt/decrypt paths always move 4 bytes of
high-order sequence number data at the end of the authenticated data.
While crypto_authenc_esn_setauthsize() already rejects explicit
non-zero authsizes in the range 1..3, crypto_authenc_esn_create()
still copied auth->digestsize into inst->alg.maxauthsize without
validating it. The AEAD core then initialized the tfm's default
authsize from that value.
As a result, selecting an ahash with digest size 1..3, such as
cbcmac(cipher_null), exposed authencesn instances whose default
authsize was invalid even though setauthsize() would have rejected the
same value. AF_ALG could then trigger the ESN tail handling with a
too-short tag and hit an out-of-bounds access.
Reject authencesn instances whose ahash digest size is in the invalid
non-zero range 1..3 so that no tfm can inherit an unsupported default
authsize. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Triple fault if restore host CR3 fails on nested #VMEXIT
If loading L1's CR3 fails on a nested #VMEXIT, nested_svm_vmexit()
returns an error code that is ignored by most callers, and continues to
run L1 with corrupted state. A sane recovery is not possible in this
case, and HW behavior is to cause a shutdown. Inject a triple fault
instead, and do not return early from nested_svm_vmexit(). Continue
cleaning up the vCPU state (e.g. clear pending exceptions), to handle
the failure as gracefully as possible.
From the APM:
Upon #VMEXIT, the processor performs the following actions in order to
return to the host execution context:
...
if (illegal host state loaded, or exception while loading host state)
shutdown
else
execute first host instruction following the VMRUN
Remove the return value of nested_svm_vmexit(), which is mostly
unchecked anyway. |
