| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An out-of-bounds read vulnerability exists in the `DecodeLookupTable` function within `DicomImageDecoder.cpp`. The lookup-table decoding logic used for `PALETTE COLOR` images does not validate pixel indices against the lookup table size. Crafted images containing indices larger than the palette size cause the decoder to read beyond allocated lookup table memory and expose heap contents in the output image. |
| InCopy versions 20.5.2, 21.2 and earlier are affected by an out-of-bounds read vulnerability when parsing a crafted file, which could result in a read past the end of an allocated memory structure. An attacker could leverage this vulnerability to execute code in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Adobe Framemaker versions 2022.8 and earlier are affected by an out-of-bounds read vulnerability when parsing a crafted file, which could result in a read past the end of an allocated memory structure. An attacker could leverage this vulnerability to execute code in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Improper input validation in Microsoft Office Excel allows an unauthorized attacker to disclose information locally. |
| Improper input validation in Windows Hyper-V allows an authorized attacker to execute code locally. |
| Out-of-bounds read in Microsoft Office Excel allows an unauthorized attacker to disclose information locally. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix out-of-bounds access in sysfs attribute read/write
Some f2fs sysfs attributes suffer from out-of-bounds memory access and
incorrect handling of integer values whose size is not 4 bytes.
For example:
vm:~# echo 65537 > /sys/fs/f2fs/vde/carve_out
vm:~# cat /sys/fs/f2fs/vde/carve_out
65537
vm:~# echo 4294967297 > /sys/fs/f2fs/vde/atgc_age_threshold
vm:~# cat /sys/fs/f2fs/vde/atgc_age_threshold
1
carve_out maps to {struct f2fs_sb_info}->carve_out, which is a 8-bit
integer. However, the sysfs interface allows setting it to a value
larger than 255, resulting in an out-of-range update.
atgc_age_threshold maps to {struct atgc_management}->age_threshold,
which is a 64-bit integer, but its sysfs interface cannot correctly set
values larger than UINT_MAX.
The root causes are:
1. __sbi_store() treats all default values as unsigned int, which
prevents updating integers larger than 4 bytes and causes out-of-bounds
writes for integers smaller than 4 bytes.
2. f2fs_sbi_show() also assumes all default values are unsigned int,
leading to out-of-bounds reads and incorrect access to integers larger
than 4 bytes.
This patch introduces {struct f2fs_attr}->size to record the actual size
of the integer associated with each sysfs attribute. With this
information, sysfs read and write operations can correctly access and
update values according to their real data size, avoiding memory
corruption and truncation. |
| NanoMQ MQTT Broker (NanoMQ) is an all-around Edge Messaging Platform. Prior to version 0.24.10, in NanoMQ's webhook_inproc.c, the hook_work_cb() function processes nng messages by parsing the message body with cJSON_Parse(body). The body is obtained from nng_msg_body(msg), which is a binary buffer without a guaranteed null terminator. This leads to an out-of-bounds read (OOB read) as cJSON_Parse reads until it finds a \0, potentially accessing memory beyond the allocated buffer (e.g., nng_msg metadata or adjacent heap/stack). The issue is often masked by nng's allocation padding (extra 32 bytes of zeros for non-power-of-two sizes <1024 or non-aligned). The overflow is reliably triggered when the JSON payload length is a power-of-two >=1024 (no padding added). This issue has been patched in version 0.24.10. |
| Insufficient data validation in Media in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to perform an out of bounds memory read via a crafted video file. (Chromium security severity: Low) |
| Kamailio is an open source implementation of a SIP Signaling Server. Prior to 6.0.5 and 5.8.7, an out-of-bounds read in the auth module of Kamailio (formerly OpenSER and SER) allows remote attackers to cause a denial of service (process crash) via a specially crafted SIP packet if a successful user authentication without a database backend is followed by additional user identity checks. This vulnerability is fixed in 6.0.5 and 5.8.7. |
| Wasmtime is a runtime for WebAssembly. From 32.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Cranelift compilation backend contains a bug on aarch64 when performing a certain shape of heap accesses which means that the wrong address is accessed. When combined with explicit bounds checks a guest WebAssembly module this can create a situation where there are two diverging computations for the same address: one for the address to bounds-check and one for the address to load. This difference in address being operated on means that a guest module can pass a bounds check but then load a different address. Combined together this enables an arbitrary read/write primitive for guest WebAssembly when accesssing host memory. This is a sandbox escape as guests are able to read/write arbitrary host memory. This vulnerability has a few ingredients, all of which must be met, for this situation to occur and bypass the sandbox restrictions. This miscompiled shape of load only occurs on 64-bit WebAssembly linear memories, or when Config::wasm_memory64 is enabled. 32-bit WebAssembly is not affected. Spectre mitigations or signals-based-traps must be disabled. When spectre mitigations are enabled then the offending shape of load is not generated. When signals-based-traps are disabled then spectre mitigations are also automatically disabled. The specific bug in Cranelift is a miscompile of a load of the shape load(iadd(base, ishl(index, amt))) where amt is a constant. The amt value is masked incorrectly to test if it's a certain value, and this incorrect mask means that Cranelift can pattern-match this lowering rule during instruction selection erroneously, diverging from WebAssembly's and Cranelift's semantics. This incorrect lowering would, for example, load an address much further away than intended as the correct address's computation would have wrapped around to a smaller value insetad. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime with its Winch (baseline) non-default compiler backend may allow properly constructed guest Wasm to access host memory outside of its linear-memory sandbox. This vulnerability requires use of the Winch compiler (-Ccompiler=winch). By default, Wasmtime uses its Cranelift backend, not Winch. With Winch, the same incorrect assumption is present in theory on both aarch64 and x86-64. The aarch64 case has an observed-working proof of concept, while the x86-64 case is theoretical and may not be reachable in practice. This Winch compiler bug can allow the Wasm guest to access memory before or after the linear-memory region, independently of whether pre- or post-guard regions are configured. The accessible range in the initial bug proof-of-concept is up to 32KiB before the start of memory, or ~4GiB after the start of memory, independently of the size of pre- or post-guard regions or the use of explicit or guard-region-based bounds checking. However, the underlying bug assumes a 32-bit memory offset stored in a 64-bit register has its upper bits cleared when it may not, and so closely related variants of the initial proof-of-concept may be able to access truly arbitrary memory in-process. This could result in a host process segmentation fault (DoS), an arbitrary data leak from the host process, or with a write, potentially an arbitrary RCE. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| A vulnerability in the Cisco Discovery Protocol functionality of Cisco ATA 190 Series Adaptive Telephone Adapter firmware could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device.
This vulnerability is due to an out-of-bounds read when processing Cisco Discovery Protocol packets. An attacker could exploit this vulnerability by sending crafted Cisco Discovery Protocol packets to an affected device. A successful exploit could allow the attacker to cause a service restart.Cisco has released firmware updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| DjVuLibre is a GPL implementation of DjVu, a web-centric format for distributing documents and images. Prior to version 3.5.29, the MMRDecoder::scanruns method is affected by an OOB-write vulnerability, because it does not check that the xr pointer stays within the bounds of the allocated buffer. This can lead to writes beyond the allocated memory, resulting in a heap corruption condition. An out-of-bounds read with pr is also possible for the same reason. This issue has been patched in version 3.5.29. |
| An Out-Of-Bounds Read vulnerability affecting the PAR file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025 could allow an attacker to execute arbitrary code while opening a specially crafted PAR file. |
| A Improper Input Validation issue affecting the v2_sdk_service running on a set of DJI drone devices on the port 10000 could allow an attacker to trigger an out-of-bound read/write into the process memory through a crafted payload due to a missing input sanity check in the v2_pack_array_to_msg function implemented in the libv2_sdk.so library imported by the v2_sdk_service binary implementing the service, potentially leading to a memory information leak or an arbitrary code execution. Affected models are Mavic 3 Pro until v01.01.0300, Mavic 3 until v01.00.1200, Mavic 3 Classic until v01.00.0500, Mavic 3 Enterprise until v07.01.10.03, Matrice 300 until v57.00.01.00, Matrice M30 until v07.01.0022 and Mini 3 Pro until v01.00.0620. |
| The vulnerability described by CVE-2023-0972 has been additionally discovered in Silicon Labs Z-Wave end devices. This vulnerability may allow an unauthenticated attacker within Z-Wave range to overflow a stack buffer, leading to arbitrary code execution. |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation via a format-agnostic API with a feature set, scalability, and robustness needed for feature film production. In affected versions there is a bug in the heif input functionality of OpenImageIO. Specifically, in `HeifInput::seek_subimage()`. In the worst case, this can lead to an information disclosure vulnerability, particularly for programs that directly use the `ImageInput` APIs. This bug has been addressed in commit `0a2dcb4c` which is included in the 2.5.13.1 release. Users are advised to upgrade. There are no known workarounds for this issue. |
| Out-of-bounds read vulnerabilities in print processing of Generic Plus PCL6 Printer Driver / Generic Plus UFR II Printer Driver / Generic Plus LIPS4 Printer Driver / Generic Plus LIPSLX Printer Driver / Generic Plus PS Printer Driver / UFRII LT Printer Driver / CARPS2 Printer Driver / Generic FAX Driver / LIPS4 Printer Driver / LIPSLX Printer Driver / UFR II Printer Driver / PS Printer Driver / PCL6 Printer Driver |
| A vulnerability classified as problematic has been found in osrg GoBGP up to 3.37.0. Affected is the function SplitRTR of the file pkg/packet/rtr/rtr.go. The manipulation leads to out-of-bounds read. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The name of the patch is e748f43496d74946d14fed85c776452e47b99d64. It is recommended to apply a patch to fix this issue. |
