| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper check for unusual or exceptional conditions in Intel(R) TDX Module firmware before version 1.5.06 may allow a privileged user to potentially enable information disclosure via local access. |
| An application can be configured to block boot attempts after consecutive tamper resets are detected, which may not occur as expected.
This is possible because the TAMPERRSTCAUSE register may not be properly updated when a level 4 tamper event (a tamper reset) occurs. This impacts Series 2 HSE-SVH devices, including xG23B, xG24B, xG25B, and xG28B, but does not impact xG21B. To mitigate this issue, upgrade to SE Firmware version 2.2.6 or later. |
| LNbits is a Lightning wallet and accounts system. Paying invoices in Eclair that do not get settled within the internal timeout (about 30s) lead to a payment being considered failed, even though it may still be in flight. This vulnerability can lead to a total loss of funds for the node backend. This vulnerability is fixed in 0.12.6.
|
| Improper conditions check in some firmware for some Intel(R) NPU Drivers within Ring 3: User Applications may allow an escalation of privilege. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable data corruption. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (low) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| In EMQX before 5.8.6, administrators can install arbitrary novel plugins via the Dashboard web interface. NOTE: the Supplier's position is that this is the intended behavior; however, 5.8.6 adds a defense-in-depth feature in which a plugin's acceptability (for later Dashboard installation) is set by the "emqx ctl plugins allow" CLI command. |
| A denial-of-service (DoS) vulnerability in Palo Alto Networks PAN-OS software enables an unauthenticated attacker to reboot a firewall by sending a specially crafted packet through the dataplane. Repeated attempts to initiate a reboot causes the firewall to enter maintenance mode.
This issue is applicable to the PAN-OS software versions listed below on PA-Series firewalls, VM-Series firewalls, and Prisma® Access software. This issue does not affect Cloud NGFW.
We have successfully completed the Prisma Access upgrade for all customers, with the exception of those facing issues such as conflicting maintenance windows. Remaining customers will be promptly scheduled for an upgrade through our standard upgrade process. |
| Improper conditions check in Linux kernel mode driver for some Intel(R) Ethernet Network Controllers and Adapters E810 Series before version 28.3 may allow an authenticated user to potentially enable denial of service via local access. |
| Improper conditions check in some firmware for some Intel(R) NPU Drivers within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a high complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| In OpenStack Neutron before 25.0.1, neutron/extensions/tagging.py can use an incorrect ID during policy enforcement. It does not apply the proper policy check for changing network tags. An unprivileged tenant is able to change (add and clear) tags on network objects that do not belong to the tenant, and this action is not subjected to the proper policy authorization check. This affects 23 before 23.2.1, 24 before 24.0.2, and 25 before 25.0.1. |
| Volto is a React based frontend for the Plone Content Management System. In versions from 19.0.0-alpha.1 to before 19.0.0-alpha.4, 18.0.0 to before 18.24.0, 17.0.0 to before 17.22.1, and prior to 16.34.0, an anonymous user could cause the NodeJS server part of Volto to quit with an error when visiting a specific URL. The problem has been patched in versions 16.34.0, 17.22.1, 18.24.0, and 19.0.0-alpha.4. To mitigate downtime, have setup automatically restart processes that quit with an error. |
| Team ENVY, a Security Research TEAM has found a flaw that allows for a remote code execution on the NVR. An attacker could inject malformed data into url input parameters to reboot the NVR. The manufacturer has released patch firmware for the flaw, please refer to the manufacturer's report for details and workarounds. |
| matrix-appservice-irc is a Node.js IRC bridge for the Matrix messaging protocol. The fix for GHSA-wm4w-7h2q-3pf7 / CVE-2024-32000 included in matrix-appservice-irc 2.0.0 relied on the Matrix homeserver-provided timestamp to determine whether a user has access to the event they're replying to when determining whether or not to include a truncated version of the original event in the IRC message. Since this value is controlled by external entities, a malicious Matrix homeserver joined to a room in which a matrix-appservice-irc bridge instance (before version 2.0.1) is present can fabricate the timestamp with the intent of tricking the bridge into leaking room messages the homeserver should not have access to. matrix-appservice-irc 2.0.1 drops the reliance on `origin_server_ts` when determining whether or not an event should be visible to a user, instead tracking the event timestamps internally. As a workaround, it's possible to limit the amount of information leaked by setting a reply template that doesn't contain the original message. |
| Socket.IO is an open source, real-time, bidirectional, event-based, communication framework. A specially crafted Socket.IO packet can trigger an uncaught exception on the Socket.IO server, thus killing the Node.js process. This issue is fixed by commit `15af22fc22` which has been included in `socket.io@4.6.2` (released in May 2023). The fix was backported in the 2.x branch as well with commit `d30630ba10`. Users are advised to upgrade. Users unable to upgrade may attach a listener for the "error" event to catch these errors.
|
| Oxford Nanopore Technologies' MinKNOW software at or prior to version 24.11 creates a temporary file to store the local authentication token during startup, before copying it to its final location. This temporary file is created in a directory accessible to all users on the system. An unauthorized local user or process can exploit this behavior by placing a file lock on the temporary token file using the flock system call. This prevents MinKNOW from completing the token generation process. As a result, no valid local token is created, and the software is unable to execute commands on the sequencer. This leads to a denial-of-service (DoS) condition, blocking sequencing operations. |
| The sequence of packets received by a Networking server are not correctly checked.
An attacker could exploit this vulnerability to send specially crafted messages to force the application to stop. |
| A security issue exists within the Studio 5000 Logix Designer add-on profile (AOP) for the ArmorStart Classic distributed motor controller, resulting in denial-of-service. This vulnerability is possible due to the input of invalid values into Component Object Model (COM) methods. |
| Volto is a ReactJS-based frontend for the Plone Content Management System. Versions 16.34.0 and below, 17.0.0 through 17.22.1, 18.0.0 through 18.27.1, and 19.0.0-alpha.1 through 19.0.0-alpha.5, an anonymous user could cause the NodeJS server part of Volto to quit with an error when visiting a specific URL. This issue is fixed in versions 16.34.1, 17.22.2, 18.27.2 and 19.0.0-alpha.6. |
| Access to TSplus Remote Access Admin Tool is restricted to administrators (unless "Disable UAC" option is enabled) and requires a PIN code. In versions below v18.40.6.17 the PIN's hash is stored in a system registry accessible to regular users, making it possible to perform a brute-force attack using rainbow tables, since the hash is not salted.
LTS (Long-Term Support) versions also received patches in v17.2025.6.27 and v16.2025.6.27 releases. |
| OpenPLC_V3 has a vulnerability in the enipThread function that occurs due to the lack of a return value. This leads to a crash when the server loop ends and execution hits an illegal ud2 instruction. This issue can be triggered remotely without authentication by starting the same server multiple times or if the server exits unexpectedly. The vulnerability allows an attacker to cause a Denial of Service (DoS) against the PLC runtime, stopping any PC started remotely without authentication. This results in the PLC process crashing and halting all automation or control logic managed by OpenPLC. |
| ethereum is a common ethereum structs for Rust. Prior to ethereum crate v0.18.0, signature malleability (according to EIP-2) was only checked for "legacy" transactions, but not for EIP-2930, EIP-1559 and EIP-7702 transactions. This is a specification deviation. The signature malleability itself is not a security issue and not as high of a risk if the ethereum crate is used on a single-implementation blockchain. This issue has been patched in version v0.18.0. A workaround for this issue involves manually checking transaction malleability outside of the crate, however upgrading is recommended. |
