| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| CreateWiki is Miraheze's MediaWiki extension for requesting & creating wikis. It is possible for users to be considered as the requester of a specific wiki request if their local user ID on any wiki in a wiki farm matches the local ID of the requester at the wiki where the wiki request was made. This allows them to go to that request entry's on Special:RequestWikiQueue on the wiki where their local user ID matches and take any actions that the wiki requester is allowed to take from there.
Commit 02e0f298f8d35155c39aa74193cb7b867432c5b8 fixes the issue. Important note about the fix: This vulnerability has been fixed by disabling access to the REST API and special pages outside of the wiki configured as the "global wiki" in `$wgCreateWikiGlobalWiki` in a user's MediaWiki settings.
As a workaround, it is possible to disable the special pages outside of one's own global wiki by doing something similar to `miraheze/mw-config` commit e5664995fbb8644f9a80b450b4326194f20f9ddc that is adapted to one's own setup. As for the REST API, before the fix, there wasn't any REST endpoint that allowed one to make writes. Regardless, it is possible to also disable it outside of the global wiki by using `$wgCreateWikiDisableRESTAPI` and `$wgConf` in the configuration for one's own wiki farm.. |
| Stalwart Mail Server is an open-source mail server. Prior to version 0.8.0, attackers who achieved Arbitrary Code Execution as the stalwart-mail user (including web interface admins) can gain complete root access to the system. Usually, system services are run as a separate user (not as root) to isolate an attacker with Arbitrary Code Execution to the current service. Therefore, other system services and the system itself remains protected in case of a successful attack. stalwart-mail runs as a separate user, but it can give itself full privileges again in a simple way, so this protection is practically ineffective. Server admins who handed out the admin credentials to the mail server, but didn't want to hand out complete root access to the system, as well as any attacked user when the attackers gained Arbitrary Code Execution using another vulnerability, may be vulnerable. Version 0.8.0 contains a patch for the issue. |
| Sysmac Studio provided by OMRON Corporation contains an incorrect authorization vulnerability. If this vulnerability is exploited, an attacker may access the program which is protected by Data Protection function. |
| Lack of authorization of the InputManager D-Bus interface in
InputPlumber versions before v0.63.0 can lead to local Denial-of-Service,
information leak or even privilege escalation in the context of the
currently active user session. |
| An Improper Access Control could allow a malicious actor authenticated in the API of certain UniFi Connect devices to enable Android Debug Bridge (ADB) and make unsupported changes to the system.
Affected Products:
UniFi Connect EV Station Pro (Version 1.5.18 and earlier)
UniFi Connect Display (Version 1.9.324 and earlier)
UniFi Connect Display Cast (Version 1.9.301 and earlier)
UniFi Connect Display Cast Pro (Version 1.0.78 and earlier)
UniFi Connect Display Cast Lite (Version 1.0.3 and earlier)
Mitigation:
Update UniFi Connect EV Station Pro to Version 1.5.27 or later
Update UniFi Connect Display to Version 1.13.6 or later
Update UniFi Connect Display Cast to Version 1.10.3 or later
Update UniFi Connect Display Cast Pro to Version 1.0.83 or later
Update UniFi Connect Display Cast Lite to Version 1.1.3 or later |
| A vulnerability in the web-based management interface of Cisco ISE could allow an authenticated, remote attacker to modify parts of the configuration on an affected device.
This vulnerability is due to the lack of server-side validation of Administrator permissions. An attacker could exploit this vulnerability by submitting a crafted HTTP request to an affected system. A successful exploit could allow the attacker to modify descriptions of files on a specific page. To exploit this vulnerability, an attacker would need valid read-only Administrator credentials. |
| Incorrect authorization vulnerability in HTTP POST method in Govee Home application on Android and iOS allows remote attacker to control devices owned by other users via changing "device", "sku" and "type" fields' values.
This issue affects Govee Home applications on Android and iOS in versions before 5.9. |
| A vulnerability has been identified in RUGGEDCOM RST2428P (6GK6242-6PA00) (All versions < V3.2), SCALANCE XCH328 (6GK5328-4TS01-2EC2) (All versions < V3.2), SCALANCE XCM324 (6GK5324-8TS01-2AC2) (All versions < V3.2), SCALANCE XCM328 (6GK5328-4TS01-2AC2) (All versions < V3.2), SCALANCE XCM332 (6GK5332-0GA01-2AC2) (All versions < V3.2), SCALANCE XRH334 (24 V DC, 8xFO, CC) (6GK5334-2TS01-2ER3) (All versions < V3.2), SCALANCE XRM334 (230 V AC, 12xFO) (6GK5334-3TS01-3AR3) (All versions < V3.2), SCALANCE XRM334 (230 V AC, 8xFO) (6GK5334-2TS01-3AR3) (All versions < V3.2), SCALANCE XRM334 (230V AC, 2x10G, 24xSFP, 8xSFP+) (6GK5334-5TS01-3AR3) (All versions < V3.2), SCALANCE XRM334 (24 V DC, 12xFO) (6GK5334-3TS01-2AR3) (All versions < V3.2), SCALANCE XRM334 (24 V DC, 8xFO) (6GK5334-2TS01-2AR3) (All versions < V3.2), SCALANCE XRM334 (24V DC, 2x10G, 24xSFP, 8xSFP+) (6GK5334-5TS01-2AR3) (All versions < V3.2), SCALANCE XRM334 (2x230 V AC, 12xFO) (6GK5334-3TS01-4AR3) (All versions < V3.2), SCALANCE XRM334 (2x230 V AC, 8xFO) (6GK5334-2TS01-4AR3) (All versions < V3.2), SCALANCE XRM334 (2x230V AC, 2x10G, 24xSFP, 8xSFP+) (6GK5334-5TS01-4AR3) (All versions < V3.2). The "Load Rollback" functionality in the web interface of affected products contains an incorrect authorization check vulnerability. This could allow an authenticated remote attacker with "guest" role to make the affected product roll back configuration changes made by privileged users. |
| Vulnerability in Spotfire Spotfire Enterprise Runtime for R - Server Edition, Spotfire Spotfire Statistics Services, Spotfire Spotfire Analyst, Spotfire Spotfire Desktop, Spotfire Spotfire Server allows The impact of this vulnerability depends on the privileges of the user running the affected software..This issue affects Spotfire Enterprise Runtime for R - Server Edition: from 1.12.7 through 1.20.0; Spotfire Statistics Services: from 12.0.7 through 12.3.1, from 14.0.0 through 14.3.0; Spotfire Analyst: from 12.0.9 through 12.5.0, from 14.0.0 through 14.3.0; Spotfire Desktop: from 14.0 through 14.3.0; Spotfire Server: from 12.0.10 through 12.5.0, from 14.0.0 through 14.3.0. |
| A vulnerability has been identified in RUGGEDCOM RST2428P (6GK6242-6PA00) (All versions < V3.2), SCALANCE XCH328 (6GK5328-4TS01-2EC2) (All versions < V3.2), SCALANCE XCM324 (6GK5324-8TS01-2AC2) (All versions < V3.2), SCALANCE XCM328 (6GK5328-4TS01-2AC2) (All versions < V3.2), SCALANCE XCM332 (6GK5332-0GA01-2AC2) (All versions < V3.2), SCALANCE XRH334 (24 V DC, 8xFO, CC) (6GK5334-2TS01-2ER3) (All versions < V3.2), SCALANCE XRM334 (230 V AC, 12xFO) (6GK5334-3TS01-3AR3) (All versions < V3.2), SCALANCE XRM334 (230 V AC, 8xFO) (6GK5334-2TS01-3AR3) (All versions < V3.2), SCALANCE XRM334 (230V AC, 2x10G, 24xSFP, 8xSFP+) (6GK5334-5TS01-3AR3) (All versions < V3.2), SCALANCE XRM334 (24 V DC, 12xFO) (6GK5334-3TS01-2AR3) (All versions < V3.2), SCALANCE XRM334 (24 V DC, 8xFO) (6GK5334-2TS01-2AR3) (All versions < V3.2), SCALANCE XRM334 (24V DC, 2x10G, 24xSFP, 8xSFP+) (6GK5334-5TS01-2AR3) (All versions < V3.2), SCALANCE XRM334 (2x230 V AC, 12xFO) (6GK5334-3TS01-4AR3) (All versions < V3.2), SCALANCE XRM334 (2x230 V AC, 8xFO) (6GK5334-2TS01-4AR3) (All versions < V3.2), SCALANCE XRM334 (2x230V AC, 2x10G, 24xSFP, 8xSFP+) (6GK5334-5TS01-4AR3) (All versions < V3.2). An internal session termination functionality in the web interface of affected products contains an incorrect authorization check vulnerability. This could allow an authenticated remote attacker with "guest" role to terminate legitimate users' sessions. |
| MinIO is a high-performance object storage system. In all versions prior to RELEASE.2025-10-15T17-29-55Z, a privilege escalation vulnerability allows service accounts and STS (Security Token Service) accounts with restricted session policies to bypass their inline policy restrictions when performing operations on their own account, specifically when creating new service accounts for the same user. The vulnerability exists in the IAM policy validation logic where the code incorrectly relied on the DenyOnly argument when validating session policies for restricted accounts. When a session policy is present, the system should validate that the action is allowed by the session policy, not just that it is not denied. An attacker with valid credentials for a restricted service or STS account can create a new service account for itself without policy restrictions, resulting in a new service account with full parent privileges instead of being restricted by the inline policy. This allows the attacker to access buckets and objects beyond their intended restrictions and modify, delete, or create objects outside their authorized scope. The vulnerability is fixed in version RELEASE.2025-10-15T17-29-55Z. |
| Incorrect access control in wms-Warehouse management system-zeqp v2.20.9.1 due to the token value of the zeqp system being reused. |
| An issue in the PepeGxng smart contract (which can be run on the Ethereum blockchain) allows remote attackers to have an unspecified impact via the _transfer function. NOTE: this is disputed by third parties because the impact is limited to function calls. |
| An issue in the WaterToken smart contract (which can be run on the Ethereum blockchain) allows remote attackers to have an unspecified impact. NOTE: this is disputed by third parties because the impact is limited to function calls. |
| An issue in System.Linq.Dynamic.Core before 1.6.0 allows remote access to properties on reflection types and static properties/fields. |
| A vulnerability in Pantera CRM versions 401.152 and 402.072 allows unauthorized attackers to bypass IP-based access controls by manipulating the X-Forwarded-For header. |
| The OpenTelemetry Collector module AWS firehose receiver is for ingesting AWS Kinesis Data Firehose delivery stream messages and parsing the records received based on the configured record type. `awsfirehosereceiver` allows unauthenticated remote requests, even when configured to require a key. OpenTelemetry Collector can be configured to receive CloudWatch metrics via an AWS Firehose Stream. Firehose sets the header `X-Amz-Firehose-Access-Key` with an arbitrary configured string. The OpenTelemetry Collector awsfirehosereceiver can optionally be configured to require this key on incoming requests. However, when this is configured it **still accepts incoming requests with no key**. Only OpenTelemetry Collector users configured with the “alpha” `awsfirehosereceiver` module are affected. This module was added in version v0.49.0 of the “Contrib” distribution (or may be included in custom builds). There is a risk of unauthorized users writing metrics. Carefully crafted metrics could hide other malicious activity. There is no risk of exfiltrating data. It’s likely these endpoints will be exposed to the public internet, as Firehose does not support private HTTP endpoints. A fix was introduced in PR #34847 and released with v0.108.0. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Incorrect access control in XIAO HE Smart 4.3.1 allows attackers to access sensitive information by analyzing the code and data within the APK file. |
| Incorrect access control in the firmware update and download processes of Yamaha Headphones Controller v1.6.7 allows attackers to access sensitive information by analyzing the code and data within the APK file. |
| Incorrect access control in the firmware update and download processes of Sylvania Smart Home v3.0.3 allows attackers to access sensitive information by analyzing the code and data within the APK file. |
