| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| libexpat before 2.8.2 lacks handler call depth tracking for calls to XML_ResumeParser from within handlers in cases of a policy violation. Thus, a use-after-free can occur (similar to the CVE-2026-50219 situation). |
| Issue summary: The generic elliptic-curve scalar multiplication used for
ECDSA and SM2 signature operations with curves that do not have a dedicated
implementation leaks information about the secret nonce through timing.
Impact summary: An attacker able to measure signing times may learn
information about the per-signature secret nonce, which over many signatures
can, via a lattice / Hidden Number Problem attack, lead to recovery of the
private key.
CWE: CWE-208: Observable Timing Discrepancy
Description: The generic elliptic-curve scalar multiplication used for
curves that do not have a dedicated constant-time implementation pads the
secret scalar with non-constant-time BIGNUM operations, so the time taken
depends on the value of the secret scalar derived from the ECDSA and SM2 nonce.
The leak is very small; observing it requires a large number of
measurements. The effect is largest for curves whose group order lies
on a machine-word boundary, such as brainpoolP384r1.
Applications using ECDSA signing over the Brainpool and other generic prime
curves, and SM2 signing on platforms that use the generic implementation,
are vulnerable to this issue.
The NIST curves P-256, P-384 and P-521 use dedicated constant-time
implementations and are not affected.
FIPS Impact: no
The FIPS modules are not affected: the approved NIST curves used in the FIPS
provider have dedicated constant-time implementations and do not use the
affected code path. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: core: fix adapter registration race
Adapters can be looked up based on their id using i2c_get_adapter()
which takes a reference to the embedded struct device.
Make sure that the adapter (including its struct device) has been
initialised before adding it to the IDR to avoid accessing uninitialised
data which could, for example, lead to NULL-pointer dereferences or
use-after-free.
Note that the i2c-dev chardev, which is registered from a bus notifier,
currently uses i2c_get_adapter() so the adapter needs to be added to the
IDR before registration. |
| In the Linux kernel, the following vulnerability has been resolved:
net: guard timestamp cmsgs to real error queue skbs
skb_is_err_queue() treats PACKET_OUTGOING as the sole marker for an skb
from sk_error_queue. That assumption is not true for AF_PACKET sockets:
outgoing packet taps are also delivered to packet sockets with
skb->pkt_type == PACKET_OUTGOING, but their skb->cb is owned by AF_PACKET
instead of struct sock_exterr_skb.
If such an skb is received with timestamping enabled, the generic
timestamp cmsg path can read AF_PACKET control-buffer state as
sock_exterr_skb::opt_stats. With SO_RXQ_OVFL enabled, the packet drop
counter overlaps opt_stats. An odd drop count makes the path emit
SCM_TIMESTAMPING_OPT_STATS with skb->len and skb->data. For non-linear
skbs this copies past the linear head and can trigger hardened usercopy or
disclose adjacent heap contents.
Keep skb_is_err_queue() local to net/socket.c, but make it verify that
the PACKET_OUTGOING marker is paired with the sock_rmem_free destructor
installed by sock_queue_err_skb(). AF_PACKET receive skbs use normal
receive ownership and no longer pass as error-queue skbs, while legitimate
sk_error_queue entries keep the PACKET_OUTGOING marker and sock_rmem_free
ownership. |
| libexpat before 2.8.2 lacks handler call depth tracking for calls to XML_GetBuffer, XML_Parse, XML_ParseBuffer, XML_ParserFree, or XML_ParserReset from within handlers in cases of a policy violation. Thus, a use-after-free can occur, |
| IO::Compress versions before 2.220 for Perl can execute arbitrary code in File::GlobMapper via an attacker-controlled output glob.
_parseOutputGlob() wraps the caller-supplied output glob string in double quotes and stores it in the parser state; _getFiles() then runs the stored expression through eval STRING. A literal double quote in the output glob closes the dquote wrapper, and the characters that follow are evaluated as Perl.
Arbitrary Perl in the output glob executes at the calling process's privilege. |
| IO::Uncompress::Unzip versions before 2.220 for Perl allow CPU exhaustion via per-byte read loop in fastForward.
fastForward() compares length $offset (the digit count of the offset, 1 to 19) against the chunk size $c instead of $offset itself, so $c shrinks from 16 KiB to 1-19 bytes per iteration.
Extracting a named entry from an attacker supplied zip via IO::Uncompress::Unzip->new($zip, Name => $target) drives a per-byte read loop scaling with the entry's compressed size, up to the non-Zip64 4 GiB cap. |
| In libexpat before 2.8.1, the computational complexity of attribute name collision checks allows a denial of service via moderately sized crafted XML input. |
| Archive::Tar versions before 3.08 for Perl extract hardlinks to attacker controlled paths outside the extraction directory.
_make_special_file() passes the tar header's linkname to link() without validating it against absolute paths or .. segments, creating a hardlink that shares the victim file's inode.
A subsequent write through the extracted name modifies the victim file, and the post-extraction chmod, chown, and utime block in _extract_file() (guarded only against symlinks via -l) applies the tar header's mode, owner, and timestamps to the shared inode during extraction alone. |
| Archive::Tar versions before 3.08 for Perl extract symlinks with attacker controlled targets outside the extraction directory.
_make_special_file() passes the tar header's linkname to symlink() without validating it against absolute paths or .. segments. The secure-extract mode check that guards regular file extraction does not cover the symlink target.
A subsequent open through the extracted name reads or writes the attacker chosen path. |
| unicodedata.normalize() can take excessive CPU time when processing
specially crafted Unicode input containing long runs of combining characters
with alternating Canonical Combining Class values.
This affects all normalization forms. |
| Issue summary: A certificate with many nameRelativeToCRLIssuer CRL
distribution points causes disproportionate heap growth when OpenSSL caches
X.509 extensions.
Impact summary: Receiving a crafted certificate from a malicious peer can lead
to significant memory pressure and possible Denial of Service in clients or
in servers that solicit client certificates.
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: A certificate or a set of certificates that fits under the limit for
size of certificates accepted from the peer (~100 KiB) can result in allocation
of several hundred MiB of resident memory on the receiving side
during a normal TLS handshake. This may be enough to crash the client or
server, if multiple concurrent connections lead to similarly large memory
allocations.
The fix postpones processing of the CRL distribution points extensions in
certificates to the time when the processed value is required for CRL processing.
This avoids keeping large memory allocations for a long time when such
certificates are received.
FIPS impact: no
The affected code is outside the FIPS module boundary. |
| libexpat before 2.7.5 allows a NULL pointer dereference in the function setContext on retry after an earlier ouf-of-memory condition. |
| libexpat before 2.7.5 allows an infinite loop while parsing DTD content. |
| libexpat before 2.7.5 allows a NULL pointer dereference with empty external parameter entity content. |
| In libexpat before 2.7.4, the doContent function does not properly determine the buffer size bufSize because there is no integer overflow check for tag buffer reallocation. |
| In libexpat before 2.7.4, XML_ExternalEntityParserCreate does not copy unknown encoding handler user data. |
| CR/LF bytes were not rejected by HTTP client proxy tunnel headers or host. |
| ssl.SSLContext.wrap_bio() didn't require the server_hostname argument
to not be None if ssl.SSLContext.check_hostname was set. Due to a
missing parameter check in SSLObject, if the server_hostname argument
isn't supplied then hostname verification would be silently skipped.
This defect could lead to programs where certificate hostname verification
*appeared* to be succeeding with SSLContext.check_hostname = True and no
ValueError being raised due to misconfiguration.
If the program passes a server_hostname value that isn't an empty string
or None to any of these APIs then certificate hostname verification
proceeds as expected and the program is not affected by this vulnerability.
Mitigating this vulnerability doesn't require updating Python or applying
the patch. To mitigate, pass a valid non-None and non-empty
server_hostname value to SSLContext.wrap_bio(),
asyncio.create_connection(), or asyncio.loop.start_tls() and
certificate hostname verification will proceed as expected. Upgrading to
the latest version of Python or applying the patch only changes the
behavior from silently skipping hostname verification to raising a
ValueError, similar to SSLContext.wrap_socket(), when server_hostname
isn't supplied. |
| Perl versions from 5.9.4 before 5.41.9 produce incorrect regular expression match results when a stale failure flag ends the Aho-Corasick prescan early in S_find_byclass.
The prescan walks the subject for positions where the full pattern could match, and the engine tries it from the leftmost one recorded. A failing transition sets the failed flag, and a later successful transition does not clear it, so the prescan reads the stale flag as a failure and stops before it can record a candidate that starts earlier. It takes a subject where one candidate is recorded and a later character then forces a fallback through a fail link that succeeds.
Example:
"ABCDE" =~ m/ABCF|BCDE|C/; # matches C at offset 2, not BCDE
"ABCDE" =~ m/ABCF|BCDE|C(G)/; # no match, BCDE missed
An alternation like this can miss input it should match, or match it on the wrong branch, so an access or filtering decision made from the result can be wrong. |
