| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to version 7.1.2-25, when providing invalid options to the wand option parser a small memory leak will occur. This issue has been patched in version 7.1.2-25. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2.23 and 6.9.13-48, due to a missing check in the MIFF decoder, a crafted file could cause an infinite loop resulting in CPU exhaustion. Versions 7.1.2.23 and 6.9.13-48 fix the issue. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-47 and 7.1.2-22, because of a missing check in the MNG coder it would be possible to read more images than the list limit policy would allow resulting in excessive resource use. This issue has been patched in versions 6.9.13-47 and 7.1.2-22. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-47 and 7.1.2-22, due to a missing check in the PSD decoder it would be possible to bypass the list-length resource policy when decoding a PSD image. Other security limits would still apply. This issue has been patched in versions 6.9.13-47 and 7.1.2-22. |
| libp2p is a JavaScript Implementation of libp2p networking stack. Prior to version 16.2.6, an unauthenticated remote peer can exhaust the disk storage of any @libp2p/kad-dht node running in server mode by sending an unbounded stream of PUT_VALUE messages whose keys bypass all content validation. No credentials, no prior relationship, and no protocol deviation beyond a crafted key are required. The victim node's datastore fills until the host disk is exhausted, making the node unavailable. This issue has been patched in version 16.2.6. |
| Dulwich is a pure-Python implementation of the Git file formats and protocols. Starting in version 0.1.0 and prior to version 1.2.5, a client with push access could push a tiny crafted thin pack (~174 bytes) whose delta header declares a huge dest_size. When dulwich ingested it via add_thin_pack / apply_delta, it would allocate hundreds of MB of memory based on that attacker-controlled size, with no relationship to the actual bytes received. Operators running a Dulwich-based Git server that exposes git-receive-pack (i.e. accepts pushes) - for example via dulwich.server functionality, the HTTP smart server, or anything built on ReceivePackHandler - are impacted. The issue is patched in 1.2.5. add_thin_pack now accepts a max_input_size keyword (bytes; 0/None = unlimited, matching git's semantics), and ReceivePackHandler reads receive.maxInputSize from the repository config and passes it through. Wire reads are counted and a PackInputTooLarge exception is raised once the cap is exceeded - equivalent to git index-pack --max-input-size. Users should upgrade to Dulwich 1.2.5 or later and set receive.maxInputSize in their server's repository config to a sane bound for their environment. On unpatched versions, receive.maxInputSize has no effect, so it cannot be used as a workaround. Until upgrading, operators should restrict dulwich-receive-pack (push) access to trusted, authenticated clients only, or disable it entirely on servers that only need to serve fetches and/or run the server under an OS-level memory limit (e.g. ulimit, cgroups/MemoryMax, or a container memory limit) so a malicious push is killed rather than taking down the host. |
| libp2p is a JavaScript Implementation of libp2p networking stack. Prior to version 15.0.23, three cooperating omissions in @libp2p/gossipsub allow an unauthenticated single peer to exhaust the Node.js heap of any gossipsub node with default options. This issue has been patched in version 15.0.23. |
| Kanidm is an identity management platform. Prior to version 1.9.3, a single unauthenticated GET to any /scim/v1/... endpoint with a ?filter= query string of a few thousand nested parentheses (≈ 4–12 KB) drives the recursive-descent PEG parser past the worker thread's stack guard page. Rust responds to stack overflow with std::process::abort() — the entire kanidmd process exits. The parse runs inside axum's Query<ScimEntryGetQuery> extractor, before any handler body and therefore before any ACL check. This issue has been patched in version 1.9.3. |
| Boxlite is a sandbox service that allows users to create lightweight virtual machines (Boxes) and launch OCI containers within them to run untrusted code. In versions 0.8.2 and prior, Boxlite allows users to configure a timeout for services running inside the virtual machine. When the timeout is triggered, Boxlite sends a signal to kill the process. However, instead of using the uncatchable SIGKILL signal, Boxlite uses the catchable SIGALRM signal. Malicious code running inside the sandbox can exploit this vulnerability to continue running after the timeout is triggered, leading to resource exhaustion within the virtual machine and affecting the availability of the Boxlite service. This issue has been patched via commit 28159fc. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix pin leak and publication ordering in __pkvm_init_vcpu()
Two bugs exist in the vCPU initialisation path:
1. If a check fails after hyp_pin_shared_mem() succeeds, the cleanup
path jumps to 'unlock' without calling unpin_host_vcpu() or
unpin_host_sve_state(), permanently leaking pin references on the
host vCPU and SVE state pages.
Extract a register_hyp_vcpu() helper that performs the checks and
the store. When register_hyp_vcpu() returns an error, call
unpin_host_vcpu() and unpin_host_sve_state() inline before falling
through to the existing 'unlock' label.
2. register_hyp_vcpu() publishes the new vCPU pointer into
'hyp_vm->vcpus[]' with a bare store, allowing a concurrent caller
of pkvm_load_hyp_vcpu() to observe a partially initialised vCPU
object.
Ensure the store uses smp_store_release() and the load uses
smp_load_acquire(). While 'vm_table_lock' currently serialises the
store and the load, these barriers ensure the reader sees the fully
initialised 'hyp_vcpu' object even if there were a lockless path or
if the lock's own ordering guarantees were insufficient for nested
object initialization. |
| Version 3.0.7 of the Securly Chrome Extension uses deprecated SHA-1 hashing for IWF CSAM URL matching (25,020 hashes) and CIPA blocklist matching (12,352 hashes). |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/versalnet: Fix device name memory leak
The device name allocated via kzalloc() in init_one_mc() is assigned to
dev->init_name but never freed on the normal removal path. device_register()
copies init_name and then sets dev->init_name to NULL, so the name pointer
becomes unreachable from the device. Thus leaking memory.
Use a stack-local char array instead of using kzalloc() for name. |
| A vulnerability was determined in sgl-project SGLang up to 0.5.11. Affected by this vulnerability is the function data_hash of the component Cache Handler. This manipulation causes denial of service. The attack is restricted to local execution. A high degree of complexity is needed for the attack. The exploitation appears to be difficult. The exploit has been publicly disclosed and may be utilized. The pull request to fix this issue awaits acceptance. |
| Uncontrolled resource consumption in ASP.NET Core allows an unauthorized attacker to deny service over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix dma-buf attachment leak in xe_gem_prime_import()
When xe_dma_buf_init_obj() fails, the attachment from
dma_buf_dynamic_attach() is not detached. Add dma_buf_detach() before
returning the error. Note: we cannot use goto out_err here because
xe_dma_buf_init_obj() already frees bo on failure, and out_err would
double-free it.
(cherry picked from commit a828eb185aac41800df8eae4b60501ccc0dbbe51) |
| Uncontrolled resource consumption in HTTP/2 allows an unauthorized attacker to deny service over a network. |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.11.1, mod_verto's WebSocket frame loop intercepts a #-prefixed speed-test protocol (#SPU / #SPB / #SPE) before any authentication check. The declared payload size in #SPU was parsed with atoi() and only rejected non-positive values, so an unauthenticated peer could request up to INT_MAX bytes. The server then wrote roughly size * 10 bytes back during the download phase, on the order of 20 GB per request, yielding strong outbound bandwidth amplification from a short request. This issue has been patched in version 1.11.1. |
| Protocol::HTTP2 versions before 1.13 for Perl is vulnerable to a HTTP/2 Bomb.
Protocol::HTTP2's inbound HPACK path has no header-list size limit, so a small HTTP/2 request can expand into large server memory (the "HTTP/2 bomb").
The headers_decode method materialises a full key+value copy per indexed reference with no running size check, and the stream_header_block_add method appends (since version 1.12) every CONTINUATION frame to the per-stream buffer unbounded.
MAX_HEADER_LIST_SIZE (default 65536) is advertised in SETTINGS but never consulted on decode. It is absent from the decoder and from the :limits export tag. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: fix nvkm_device leak on aperture removal failure
When aperture_remove_conflicting_pci_devices() fails during probe, the
error path returns directly without unwinding the nvkm_device that was
just allocated by nvkm_device_pci_new(). This leaks both the device
wrapper and the pci_enable_device() reference taken inside it.
Jump to the existing fail_nvkm label so nvkm_device_del() runs and
balances both. The leak was introduced when the intermediate
nvkm_device_del() between detection and aperture removal was dropped
in favor of creating the pci device once. |
| An uncaught exception in the /application/job/update/{id} endpoint of FastapiAdmin v2.2.0 allows authenticated attackers with the module_task:job:update permission to cause a Denial of Service (DoS) via manipulating the func field of scheduled tasks. |
