| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet FortiADC 7.6.0 through 7.6.1, FortiADC 7.4.0 through 7.4.6, FortiADC 7.2.0 through 7.2.7, FortiADC 7.1.0 through 7.1.4, FortiADC 7.0 all versions, FortiADC 6.2 all versions, FortiADC 6.1 all versions, FortiADC 6.0 all versions, FortiADC 5.4 all versions, FortiADC 5.3 all versions, FortiADC 5.2 all versions, FortiADC 5.1 all versions, FortiADC 5.0 all versions, FortiADC 4.8 all versions, FortiADC 4.7 all versions, FortiADC 4.6 all versions, FortiADC 4.5 all versions, FortiADC 4.4 all versions, FortiADC 4.3 all versions, FortiADC 4.2 all versions, FortiADC 4.1 all versions, FortiADC 4.0 all versions, FortiADC 3.2 all versions, FortiADC 3.1 all versions, FortiADC 3.0 all versions may allow attacker to execute unauthorized code or commands via <insert attack vector here> |
| A vulnerability has been found in D-Link DNS-320L, DNS-327L, DNS-340L and DNS-345 up to 20260717. Affected by this issue is some unknown functionality of the file /cgi-bin/usb_device.cgi of the component CGI Handler. Such manipulation of the argument f_ups_ip leads to os command injection. The attack may be performed from remote. The exploit has been disclosed to the public and may be used. |
| A vulnerability was identified in diem-project diem up to 5.1.3. The affected element is the function executeCommand of the file dmAdminPlugin/modules/dmConsole/actions/actions.class.php of the component Administrative Console. Such manipulation of the argument dm_command leads to os command injection. The attack can be launched remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Dell PowerStore SDNAS, contains an Out-of-bounds Write vulnerability in SMB/CIFS. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to denial of service and remote execution. This is a Critical vulnerability as a remote user could send a specially crafted SMB packet and cause a crash, that is persistent in case automatic restarts are enabled. Additionally, a more sophisticated attacker could use the same vulnerability for remote code execution. |
| A flaw was found in dracut. A remote attacker on the adjacent network can exploit this vulnerability by providing specially crafted DHCP options, such as a malicious root-path, next-server, or bootfile name, to a system using dracut's NetworkManager-based initrd network module. These options are improperly handled and written into a temporary shell script without proper escaping, leading to command injection. This allows the attacker to achieve root code execution within the initramfs during system boot. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: fix guest_memory_dirty bitfield clobbered as size
Two sites in vmwgfx_resource.c assign boolean literals to
res->guest_memory_size, which is an unsigned long allocation-size
field; the intended target is the adjacent res->guest_memory_dirty
bitfield. After the assignments the field holds 0 or 1 instead of
the resource's MOB allocation size:
- vmw_resource_release() writes 0 (false), and
- vmw_resource_unbind_list() writes 1 (true).
Subsequent revalidation paths read guest_memory_size when computing
the dirty page range (vmw_bo_dirty_transfer_to_res()) and the buffer
allocation size (vmw_resource_buf_alloc()), producing zero-length
walks or wrap-around ranges that read or write past the MOB bitmap.
The dirty-tracking intent of the original code (mark the resource as
dirtied since the last sync) is also lost, since guest_memory_dirty
is never updated.
Rename both assignments to guest_memory_dirty. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lwtunnel: Drop skb metadata before LWT encapsulation
skb metadata is meant for passing information between XDP and TC. It lives
in the skb headroom, immediately before skb->data. LWT programs cannot
access the __sk_buff->data_meta pseudo-pointer to metadata.
However, LWT encapsulation prepends outer headers, moving skb->data back
over the headroom where the metadata sits. On an RX-originated (forwarded)
packet that still carries XDP metadata this goes wrong in two different
ways, depending on the encap type:
1. Non-BPF LWT encaps (mpls, seg6, ioam6 ...) call skb_push()/skb_pull()
and silently overwrite the metadata that sits in the headroom.
2) BPF LWT xmit calls bpf_skb_change_head(), which uses skb_data_move().
That helper expects metadata immediately before skb->data. But since
the IP output path runs LWT xmit before neighbour output has built
the outgoing L2 header, for forwarded packets skb->data points at the
L3 header while skb_mac_header() still points at the old L2 header.
skb_data_move() sees metadata ending at skb_mac_header(), not before
skb->data, warns and clears metadata:
WARNING: CPU: 21 PID: 454557 at include/linux/skbuff.h:4609 skb_data_move+0x47/0x90
CPU: 21 UID: 0 PID: 454557 Comm: napi/iconduit-g Tainted: G O 6.18.21 #1
RIP: 0010:skb_data_move+0x47/0x90
Call Trace:
<IRQ>
bpf_skb_change_head+0xe6/0x1a0
bpf_prog_...+0x213/0x2e3
run_lwt_bpf.isra.0+0x1d3/0x360
bpf_xmit+0x46/0xe0
lwtunnel_xmit+0xa1/0xf0
ip_finish_output2+0x1e7/0x5e0
ip_output+0x63/0x100
__netif_receive_skb_one_core+0x85/0xa0
process_backlog+0x9c/0x150
__napi_poll+0x2b/0x190
net_rx_action+0x40b/0x7f0
handle_softirqs+0xd2/0x270
do_softirq+0x3f/0x60
</IRQ>
That is what happens, as for how to fix it - a received packet that
carries metadata can reach an encap through any of the three LWT
redirect modes:
LWTUNNEL_STATE_INPUT_REDIRECT
ip6_rcv_finish
dst_input
lwtunnel_input
LWTUNNEL_STATE_OUTPUT_REDIRECT
ip6_rcv_finish
dst_input
ip6_forward
ip6_forward_finish
dst_output
lwtunnel_output
LWTUNNEL_STATE_XMIT_REDIRECT
ip6_rcv_finish
dst_input
ip6_forward
ip6_forward_finish
dst_output
ip6_output
ip6_finish_output
ip6_finish_output2
lwtunnel_xmit
Every encap funnels through the three LWT dispatch helpers, so drop the
metadata there, right before handing the skb to the encap op. This
single chokepoint covers all encap types and all three redirect modes:
- lwtunnel_input(): seg6, rpl, ila, seg6_local
- lwtunnel_output(): ioam6
- lwtunnel_xmit(): mpls, LWT BPF xmit
Alternatively, we could clear the metadata right after TC ingress hook.
That would require a compromise, however. Metadata would become
inaccessible from TC egress (in setups where it actually reaches the
hook it tact, that is without any L2 tunnels on path). |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: bound interrupt-vector register fill to the allocated array
idpf_get_reg_intr_vecs() fills the caller-allocated reg_vals[] array from
the VIRTCHNL2_OP_ALLOC_VECTORS reply in adapter->req_vec_chunks, bounding
its inner loop only by the per-chunk num_vectors. The array is sized
separately: idpf_intr_reg_init() allocates
kzalloc_objs(struct idpf_vec_regs, total_vecs) from
caps.num_allocated_vectors and only checks the returned count after the
fill. The sum of per-chunk num_vectors is never reconciled against
total_vecs, so a reply with a small num_allocated_vectors but chunks
summing higher writes past the end of reg_vals[].
Impact: a control plane (a PF or hypervisor device model) that returns a
VIRTCHNL2_OP_ALLOC_VECTORS reply whose per-chunk num_vectors sum exceeds
num_allocated_vectors writes struct idpf_vec_regs entries past the end of
the reg_vals kmalloc allocation (KASAN slab-out-of-bounds write).
Bound the fill loop to the array capacity passed in by the callers,
mirroring the sibling idpf_vport_get_q_reg(). The existing
num_regs < num_vecs check then rejects an undersized reply without the
out-of-bounds write happening first. |
| In the Linux kernel, the following vulnerability has been resolved:
can: softing: fw_parse(): validate firmware record spans
fw_parse() reads a fixed record header, a firmware-provided payload,
and a trailing checksum without knowing the end of the firmware blob. A
truncated record can therefore make those reads exceed the blob.
The same record also supplies addresses and lengths for writes into
DPRAM. The generic loader uses wrap-prone mixed signed arithmetic for its
bounds check, while the application loader does not bound the staging
copy at all.
Pass the firmware end to the parser and validate the full source record.
Use a signed wide offset for generic DPRAM records and validate the
application staging span against the mapped DPRAM before copying. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: fix foe_check_time allocation size
foe_check_time is declared as u16 pointer but was allocated with
only ppe_num_entries bytes instead of ppe_num_entries * sizeof(u16).
When airoha_ppe_foe_verify_entry() is called with hash >= ppe_num_entries/2,
it writes beyond the allocated buffer, causing heap buffer overflow and
potential kernel crash. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: lzo: reject compressed segment that overflows the compressed input
lzo_decompress_bio() validates each on-disk segment length seg_len only
against the workspace cbuf size, not against the compressed input size
(compressed_len, the total folio bytes of the bio). A crafted extent can
carry a segment whose seg_len passes the cbuf check but runs past the end
of the bio, so copy_compressed_segment() walks off the last folio:
get_current_folio() then returns the NULL folio from bio_next_folio(), and
with CONFIG_BTRFS_ASSERT disabled (default) folio_size(NULL) faults.
BUG: KASAN: null-ptr-deref in lzo_decompress_bio (fs/btrfs/lzo.c:383)
Read of size 8 at addr 0000000000000000 by task kworker/u8:1/29
Workqueue: btrfs-endio simple_end_io_work
kasan_report (mm/kasan/report.c:590)
lzo_decompress_bio (fs/btrfs/lzo.c:383)
end_bbio_compressed_read (fs/btrfs/compression.c:1065)
btrfs_bio_end_io (fs/btrfs/bio.c:135)
btrfs_check_read_bio (fs/btrfs/bio.c:180 fs/btrfs/bio.c:285)
simple_end_io_work
process_one_work
worker_thread
Reject any segment whose payload would extend beyond compressed_len before
copying it, treating it as corruption like the other on-disk validation
failures in this function. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dst_metadata: fix false-positive memcpy overflow in tun_dst_unclone
kmalloc_flex() in metadata_dst_alloc() sets __counted_by for the
structure to the options_len, which is then initialized to zero.
Later, we're initializing the structure by copying the tunnel info
together with the options, and this triggers a warning for a potential
memcpy overflow, since the compiler estimates that the options can't
fit into the structure, even though the memory for them is actually
allocated.
memcpy: detected buffer overflow: 104 byte write of buffer size 96
WARNING: CPU: X PID: Y at lib/string_helpers.c:1036 __fortify_report
skb_tunnel_info_unclone+0x179/0x190
geneve_xmit+0x7fe/0xe00
The issue is triggered when built with clang and source fortification.
Fix that by doing the copy in two stages: first - the main data with
the options_len, then the options. This way the correct length should
be known at the time of the copy.
It would be better if the options_len never changed after allocation,
but the allocation code is a little separate from the initialization
and it would be awkward and potentially dangerous to return a struct
with options_len set to a non-zero value from the metadata_dst_alloc().
Another option would be to use ip_tunnel_info_opts_set(), but it is
doing too many unnecessary operations for the use case here. |
| A buffer overflow vulnerability in the WatchGuard Fireware OS Management Web UI allows an authenticated administrator with network access to cause a denial of service (DoS) condition or potentially execute arbitrary code by sending specially crafted network traffic. |
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. Versions 3.3.0 through 3.3.12 and 3.4.0 through 3.4.13 contain a heap buffer overflow in PyOpenEXR triggered by a channel-name key collision between literal and prefixed RGB channels. When separate_channels=false, PyOpenEXR maps each physical channel name through channelNameToRGBA() and coalesces the results into a shared RGB array. A crafted flat scanline EXR that contains both a literal channel such as left and prefixed channels such as left.R, left.G, and left.B causes these names to collide, so the wrapper reuses an undersized two-dimensional NumPy array for the coalesced RGB slices and writes out of bounds when OpenEXR.File(path) decodes the pixels. This issue is fixed in versions 3.3.13 and 3.4.14. |
| mcp-shell is an MCP server for running shell commands securely, auditably, and on demand. Prior to 0.6.0, the default security.yaml allows /usr/bin/git, while security.go omits ! from containsShellMetacharacters and containsDangerousShellConstructs and applies no per-executable argument policy. A caller of the shell_exec MCP tool can provide the command argument /usr/bin/git -c alias.pwn=!<arbitrary-command>, causing Git to create a shell alias and execute arbitrary OS commands as the mcp-shell process user. The default Docker image runs as mcpuser with Git installed and secure mode enabled, so the bypass is exploitable in the default deployment without additional authentication beyond MCP connectivity. This issue is fixed in version 0.6.0. |
| The Okta Privileged Access client does not reject a leading hyphen in the username portion of an SSH target. As a result, the value may be interpreted as a command-line option by the underlying SSH process. |
| SMM IHISI command handler, FMTSWriteUseIntelLib, for FMTS command 0x32, read and write data without checking buffer size and could cause buffer overflow. |
| Dell PowerProtect One, versions 20.1.0.0 and below, contain an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Code execution. |
| CVE-2025-40843 https://github.com/advisories/GHSA-5xf2-f6ch-6p8r was fixed by replacing unchecked strcpy() with a bounded safe_strcpy() helper.
At ldlogger-tool-gcc.c:129 the destination passed to that helper is fullPath + 2, but the size
passed down is the full PATH_MAX. safe_strcpy() is strncpy(), which NUL-pads the
destination out to the whole n, so this site writes 4096 bytes into the 4094 that remain — a
2-byte stack overflow on every invocation, independent of the input path's length.
This issue affects CodeChecker: through 6.28.2. |
| A flaw was found in FFmpeg. The tdsc_load_cursor() function writes beyond
the bounds of a heap-allocated buffer when processing crafted TDSC cursor
data. A remote attacker could exploit this by supplying a specially crafted
video file, potentially leading to a denial of service or arbitrary code
execution. |
