| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In OpenAirInterface V2.2.0 AMF, Out of sequence messages causes incorrect state transition during UE registration procedure. This allows authentication to be bypassed completely. If a SecurityModeComplete message is sent after InitialUERegistration, a registration reject is received followed by a registration accept! This leads the UE to be registered without proper authentication. |
| An Authentication Bypass Using an
Alternate Path or Channel vulnerability in Juniper Networks Session Smart
Router may allows a network-based attacker to bypass authentication
and take administrative control of the device.
This issue affects Session Smart Router:
* from 5.6.7 before 5.6.17,
* from 6.0 before 6.0.8 (affected from 6.0.8),
* from 6.1 before 6.1.12-lts,
* from 6.2 before 6.2.8-lts,
* from 6.3 before 6.3.3-r2;
This issue affects Session Smart Conductor:
* from 5.6.7 before 5.6.17,
* from 6.0 before 6.0.8 (affected from 6.0.8),
* from 6.1 before 6.1.12-lts,
* from 6.2 before 6.2.8-lts,
* from 6.3 before 6.3.3-r2;
This issue affects WAN Assurance Managed Routers:
* from 5.6.7 before 5.6.17,
* from 6.0 before 6.0.8 (affected from 6.0.8),
* from 6.1 before 6.1.12-lts,
* from 6.2 before 6.2.8-lts,
* from 6.3 before 6.3.3-r2. |
| Authentication Bypass Using an Alternate Path or Channel vulnerability in ABB ABB Ability Edgenius.This issue affects ABB Ability Edgenius: 3.2.0.0, 3.2.1.1. |
| Zed is a multiplayer code editor. Prior to version 0.197.3, in the Zed Agent Panel allowed for an AI agent to achieve Remote Code Execution (RCE) by bypassing user permission checks. An AI Agent could have exploited a permissions bypass vulnerability to create or modify a project-specific configuration file, leading to the execution of arbitrary commands on a victim's machine without the explicit approval that would otherwise be required. This vulnerability has been patched in version 0.197.3. A workaround for this issue involves either avoid sending prompts to the Agent Panel, or to limit the AI Agent's file system access. |
| The User Toolkit plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 1.2.3. This is due to an improper capability check in the 'switchUser' function. This makes it possible for authenticated attackers, with subscriber-level permissions and above, to log in as any existing user on the site, such as an administrator. CVE-2024-50503 may be a duplicate. |
| The Nextend Social Login Pro plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 3.1.14. This is due to insufficient verification on the user being returned by the social login token. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email and the user does not have an already-existing account for the service returning the token. |
| The WatchTowerHQ plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 3.10.1. This is due to the 'watchtower_ota_token' default value is empty, and the not empty check is missing in the 'Password_Less_Access::login' function. This makes it possible for unauthenticated attackers to log in to the WatchTowerHQ client administrator user. |
| Attackers can bypass the web login authentication process to gain access to the printer's system information and upload malicious drivers to the printer. As for the affected products/models/versions, see the reference URL. |
| An “Authentication Bypass Using an Alternate Path or Channel” vulnerability in the OPC UA Server configuration required for B&R mapp Cockpit before 6.0, B&R mapp View before 6.0, B&R mapp Services before 6.0, B&R mapp Motion before 6.0 and B&R mapp Vision before 6.0 may be used by an unauthenticated network-based attacker to cause information disclosure, unintended change of data, or denial of service conditions.
B&R mapp Services is only affected, when mpUserX or mpCodeBox are used in the Automation Studio project. |
| Authentication bypass vulnerability exists in FutureNet AS series (Industrial Routers) provided by Century Systems Co., Ltd. If this vulnerability is exploited, a remote unauthenticated attacker may obtain the device information such as MAC address by sending a specially crafted request. |
| This vulnerability exists in the CAP back office application due to improper implementation of OTP verification mechanism in its API based login. A remote attacker with valid credentials could exploit this vulnerability by manipulating API request URL/payload. Successful exploitation of this vulnerability could allow the attacker to bypass Two-Factor Authentication (2FA) for other user accounts. |
| Nokia Single RAN AirScale baseband allows an authenticated administrative user access to all physical boards after performing a single login to the baseband system board. The baseband does not re-authenticate the user when they connect from the baseband system board to the baseband capacity boards using the internal bsoc SSH service, which is available only internally within the baseband and through the internal backplane between the boards. The bsoc SSH allows login from one board to another via the baseband internal backplane using an SSH private key present on the baseband system board.
This bsoc SSH capability was previously considered an administrative functionality but has now been restricted to be available only to baseband root-privileged administrators. This restriction mitigates the possibility of misuse with lower-level privileges (e.g., from baseband software images). This mitigation is included starting from release 23R4-SR 3.0 MP and later |
| A vulnerability has been identified in SINUMERIK 828D PPU.4 (All versions < V4.95 SP5), SINUMERIK 828D PPU.5 (All versions < V5.25 SP1), SINUMERIK 840D sl (All versions < V4.95 SP5), SINUMERIK MC (All versions < V1.25 SP1), SINUMERIK MC V1.15 (All versions < V1.15 SP5), SINUMERIK ONE (All versions < V6.25 SP1), SINUMERIK ONE V6.15 (All versions < V6.15 SP5). The affected application improperly validates authentication for its VNC access service, allowing access with insufficient password verification.
This could allow an attacker to gain unauthorized remote access and potentially compromise system confidentiality, integrity, or availability. |
| An authentication vulnerability exists in the LG Innotek camera model LNV5110R firmware that allows a malicious actor to upload an HTTP POST request to the devices non-volatile storage. This action may result in remote code execution that allows an attacker to run arbitrary commands on the target device at the administrator privilege level. |
| The Themes Coder – Create Android & iOS Apps For Your Woocommerce Site plugin for WordPress is vulnerable to privilege escalation via account takeover in all versions up to, and including, 1.3.4. This is due to the plugin not properly validating a user's identity prior to updating their password through the update_user_profile() function. This makes it possible for unauthenticated attackers to change arbitrary user's passwords, including administrators, and leverage that to gain access to their account. |
| Ironic-image is an OpenStack Ironic deployment packaged and configured by Metal3. When the reverse proxy mode is enabled by the `IRONIC_REVERSE_PROXY_SETUP` variable set to `true`, 1) HTTP basic credentials are validated on the HTTPD side in a separate container, not in the Ironic service itself and 2) Ironic listens in host network on a private port 6388 on localhost by default. As a result, when the reverse proxy mode is used, any Pod or local Unix user on the control plane Node can access the Ironic API on the private port without authentication. A similar problem affects Ironic Inspector (`INSPECTOR_REVERSE_PROXY_SETUP` set to `true`), although the attack potential is smaller there. This issue affects operators deploying ironic-image in the reverse proxy mode, which is the recommended mode when TLS is used (also recommended), with the `IRONIC_PRIVATE_PORT` variable unset or set to a numeric value. In this case, an attacker with enough privileges to launch a pod on the control plane with host networking can access Ironic API and use it to modify bare-metal machine, e.g. provision them with a new image or change their BIOS settings. This vulnerability is fixed in 24.1.1. |
| Authentication Bypass Using an Alternate Path or Channel vulnerability in quantumcloud Simple Link Directory qc-simple-link-directory allows Authentication Abuse.This issue affects Simple Link Directory: from n/a through < 14.8.1. |
| The Pie Register - Social Sites Login (Add on) plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 1.7.7. This is due to insufficient verification on the user being supplied during a social login through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email. |
| Certain models of routers from Billion Electric has an Authentication Bypass vulnerability, allowing unautheticated attackers to retrive contents of arbitrary web pages. |
| The Melapress Login Security plugin for WordPress is vulnerable to Authentication Bypass due to missing authorization within the get_valid_user_based_on_token() function in versions 2.1.0 to 2.1.1. This makes it possible for unauthenticated attackers who know an arbitrary user meta value to bypass authentication checks and log in as that user. |
