| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ewe is a Gleam web server. Versions 0.8.0 through 3.0.4 contain a bug in the handle_trailers function where rejected trailer headers (forbidden or undeclared) cause an infinite loop. When handle_trailers encounters such a trailer, three code paths (lines 520, 523, 526) recurse with the original buffer (rest) instead of advancing past the rejected header (Buffer(header_rest, 0)), causing decoder.decode_packet to re-parse the same header on every iteration. The resulting loop has no timeout or escape — the BEAM process permanently wedges at 100% CPU. Any application that calls ewe.read_body on chunked requests is affected, and this is exploitable by any unauthenticated remote client before control returns to application code, making an application-level workaround impossible. This issue is fixed in version 3.0.5. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.7.2, an attacker who uses this vulnerability can craft a PDF which leads to an infinite loop. This requires reading the file. This has been fixed in pypdf 6.7.2. As a workaround, one may apply the patch manually. |
| libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation. |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 VBA feature that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to crash.
This vulnerability is due to improper error checking when decompressing VBA data. An attacker could exploit this vulnerability by sending crafted VBA data to the Snort 3 Detection Engine on the targeted device. A successful exploit could allow the attacker to cause the Snort 3 Detection Engine to enter an infinite loop, causing a DoS condition. |
| file-type detects the file type of a file, stream, or data. Prior to 21.3.1, a denial of service vulnerability exists in the ASF (WMV/WMA) file type detection parser. When parsing a crafted input where an ASF sub-header has a size field of zero, the parser enters an infinite loop. The payload value becomes negative (-24), causing tokenizer.ignore(payload) to move the read position backwards, so the same sub-header is read repeatedly forever. Any application that uses file-type to detect the type of untrusted/attacker-controlled input is affected. An attacker can stall the Node.js event loop with a 55-byte payload. Fixed in version 21.3.1. |
| Stack overflow vulnerability in the media platform.
Impact: Successful exploitation of this vulnerability may affect availability. |
| Aardvark-dns is an authoritative dns server for A/AAAA container records. From 1.16.0 to 1.17.0, a truncated TCP DNS query followed by a connection reset causes aardvark-dns to enter an unrecoverable infinite error loop at 100% CPU. This vulnerability is fixed in 1.17.1. |
| FileZilla FTP server before 0.9.6, when using MODE Z (zlib compression), allows remote attackers to cause a denial of service (infinite loop) via certain file uploads or directory listings. |
| mod_ssl in Apache 2.0.50 and earlier allows remote attackers to cause a denial of service (CPU consumption) by aborting an SSL connection in a way that causes an Apache child process to enter an infinite loop. |
| The BMP image processor for (1) gdk-pixbuf before 0.22 and (2) gtk2 before 2.2.4 allows remote attackers to cause a denial of service (infinite loop) via a crafted BMP file. |
| aspnet_wp.exe in Microsoft ASP.NET web services allows remote attackers to cause a denial of service (CPU consumption from infinite loop) via a crafted SOAP message to an RPC/Encoded method. |
| A vulnerability in the management and VPN web servers of Cisco Secure Firewall ASA Software and Secure FTD Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
This vulnerability is due to improper validation of user-supplied input on an interface with VPN web services. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted web server on an affected device. A successful exploit could allow the attacker to cause a DoS condition when the device reloads. |
| Issue summary: Checking excessively long DSA keys or parameters may be very
slow.
Impact summary: Applications that use the functions EVP_PKEY_param_check()
or EVP_PKEY_public_check() to check a DSA public key or DSA parameters may
experience long delays. Where the key or parameters that are being checked
have been obtained from an untrusted source this may lead to a Denial of
Service.
The functions EVP_PKEY_param_check() or EVP_PKEY_public_check() perform
various checks on DSA parameters. Some of those computations take a long time
if the modulus (`p` parameter) is too large.
Trying to use a very large modulus is slow and OpenSSL will not allow using
public keys with a modulus which is over 10,000 bits in length for signature
verification. However the key and parameter check functions do not limit
the modulus size when performing the checks.
An application that calls EVP_PKEY_param_check() or EVP_PKEY_public_check()
and supplies a key or parameters obtained from an untrusted source could be
vulnerable to a Denial of Service attack.
These functions are not called by OpenSSL itself on untrusted DSA keys so
only applications that directly call these functions may be vulnerable.
Also vulnerable are the OpenSSL pkey and pkeyparam command line applications
when using the `-check` option.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue. |
| A vulnerability in the function that performs IPv4 and IPv6 Network Address Translation (NAT) DNS inspection for Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to an infinite loop condition that occurs when a Cisco Secure ASA or Cisco Secure FTD device processes DNS packets with DNS inspection enabled and the device is configured for NAT44, NAT64, or NAT46. An attacker could exploit this vulnerability by sending crafted DNS packets that match a static NAT rule with DNS inspection enabled through an affected device. A successful exploit could allow the attacker to create an infinite loop and cause the device to reload, resulting in a DoS condition. |
| An improper input neutralization vulnerability in the management web interface of the Palo Alto Networks PAN-OS® software enables a malicious authenticated read-write administrator to impersonate another legitimate authenticated PAN-OS administrator.
The attacker must have network access to the management web interface to exploit this issue. You greatly reduce the risk of this issue by restricting access to the management web interface to only trusted internal IP addresses according to our recommended critical deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 .
This issue does not affect Cloud NGFW and all Prisma® Access instances. |
| There is a HIGH severity vulnerability affecting the CPython "zipfile"
module affecting "zipfile.Path". Note that the more common API "zipfile.ZipFile" class is unaffected.
When iterating over names of entries in a zip archive (for example, methods
of "zipfile.Path" like "namelist()", "iterdir()", etc)
the process can be put into an infinite loop with a maliciously crafted
zip archive. This defect applies when reading only metadata or extracting
the contents of the zip archive. Programs that are not handling
user-controlled zip archives are not affected. |
| A vulnerability in the packet inspection functionality of the Snort 3 Detection Engine of Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to incorrect processing of traffic that is inspected by an affected device. An attacker could exploit this vulnerability by sending crafted traffic through the affected device. A successful exploit could allow the attacker to cause the affected device to enter an infinite loop while inspecting traffic, resulting in a DoS condition. The system watchdog will restart the Snort process automatically. |
| ts-asn1-der is a collection of utility classes to encode ASN.1 data following DER rule. Incorrect number DER encoding can lead to denial on service for absolute values in the range 2**31 -- 2**32 - 1. The arithmetic in the numBitLen didn't take into account that values in this range could result in a negative result upon applying the >> operator, leading to an infinite loop. The issue is patched in version 1.0.4. If upgrading is not an option, the issue can be mitigated by validating inputs to Asn1Integer to ensure that they are not smaller than -2**31 + 1 and no larger than 2**31 - 1. |
| The package `github.com/gomarkdown/markdown` is a Go library for parsing Markdown text and rendering as HTML. Prior to pseudoversion `v0.0.0-20240729232818-a2a9c4f`, which corresponds with commit `a2a9c4f76ef5a5c32108e36f7c47f8d310322252`, there was a logical problem in the paragraph function of the parser/block.go file, which allowed a remote attacker to cause a denial of service (DoS) condition by providing a tailor-made input that caused an infinite loop, causing the program to hang and consume resources indefinitely. Submit `a2a9c4f76ef5a5c32108e36f7c47f8d310322252` contains fixes to this problem. |
| In Genivia gSOAP with a specific configuration an unauthenticated remote attacker can generate a high CPU load when forcing to parse an XML having duplicate ID attributes which can lead to a DoS. |
