| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was identified in TRENDnet TI-G160i, TI-PG102i and TPL-430AP up to 20250724. This affects an unknown part of the component SSH Service. The manipulation leads to use of default credentials. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The vendor explains: "For product TI-PG102i and TI-G160i, by default, the product's remote management options are all disabled. The root account is for troubleshooting purpose and the password is encrypted. However, we will remove the root account from the next firmware release. For product TPL-430AP, the initial setup process requires user to set the password for the management GUI. Once that was done, the default password will be invalid." |
| Command injection in the <redacted> parameter of a <redacted>.exe request leads to remote code execution as the root user.
This issue affects Iocharger firmware for AC models before version 24120701.
Likelihood: Moderate – This action is not a common place for command injection vulnerabilities to occur. Thus, an attacker will likely only be able to find this vulnerability by reverse-engineering the firmware or trying it on all <redacted> fields. The attacker will also need a (low privilege) account to gain access to the <redacted> binary, or convince a user with such access to execute a payload.
Impact: Critical – The attacker has full control over the charging station as the root user, and can arbitrarily add, modify and delete files and services.
CVSS clarification. The attack can be executed over any network connection the station is listening to and serves the web interface (AV:N), and there are no additional security measure sin place that need to be circumvented (AC:L), the attack does not rely on preconditions (AT:N). The attack does require authentication, but the level of authentication is irrelevant (PR:L), it does not require user interaction (UI:N). If is a full system compromise, potentially fully compromising confidentiality, integrity and availability of the devicer (VC:H/VI:H/VA:H). A compromised charger can be used to "pivot" onto networks that should otherwise be closed, cause a low confidentiality and interity impact on subsequent systems. (SC:L/SI:L/SA:H). Because this device is an EV charger handing significant amounts of power, we suspect this vulnerability can have a safety impact (S:P). The attack can be automated (AU:Y). |
| Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability allows OS Command Injection as root
This issue affects Iocharger firmware for AC model chargers before version 24120701
Likelihood: Moderate – The <redacted> binary does not seem to be used by the web interface, so it might be more difficult to find. It seems to be largely the same binary as used by the Iocharger Pedestal charging station, however. The attacker will also need a (low privilege) account to gain access to the <redacted> binary, or convince a user with such access to execute a crafted HTTP request.
Impact: Critical – The attacker has full control over the charging station as the root user, and can arbitrarily add, modify and delete
files and services. |
| Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability allows OS Command Injection as root
This issue affects Iocharger firmware for AC model chargers before version 24120701.
Likelihood: Moderate – The attacker will first need to find the name of the script, and needs a (low privilege) account to gain access to the script, or convince a user with such access to execute a request to it.
Impact: Critical – The attacker has full control over the charging station as the root user, and can arbitrarily add, modify and deletefiles and services.
CVSS clarification: Any network interface serving the web ui is vulnerable (AV:N) and there are not additional security measures to circumvent (AC:L), nor does the attack require and existing preconditions (AT:N). The attack is authenticated, but the level of authentication does not matter (PR:L), nor is any user interaction required (UI:N). The attack leads to a full compromised (VC:H/VI:H/VA:H), and compromised devices can be used to pivot into networks that should potentially not be accessible (SC:L/SI:L/SA:H). Becuase this is an EV charger handing significant power, there is a potential safety impact (S:P). This attack can be automated (AU:Y). |
| dag-factory is a library for Apache Airflow® to construct DAGs declaratively via configuration files. In versions 0.23.0a8 and below, a high-severity vulnerability has been identified in the cicd.yml workflow within the astronomer/dag-factory GitHub repository. The workflow, specifically when triggered by pull_request_target, is susceptible to exploitation, allowing an attacker to execute arbitrary code within the GitHub Actions runner environment. This misconfiguration enables an attacker to establish a reverse shell, exfiltrate sensitive secrets, including the highly-privileged GITHUB_TOKEN, and ultimately gain full control over the repository. This is fixed in version 0.23.0a9. |
| mySCADA myPRO does not properly neutralize POST requests sent to a specific port with version information. This vulnerability could be exploited by an attacker to execute arbitrary commands on the affected system. |
| Multiple hardcoded credentials have been identified, which are allowed to sign-in to the exos 9300 datapoint server running on port 1004 and 1005. This server is used for relaying status information from and to the Access Managers. This information, among other things, is used to graphically visualize open doors and alerts. However, controlling the Access Managers via this interface is also possible.
To send and receive status information, authentication is necessary. The Kaba exos 9300 application contains hard-coded credentials for four different users, which are allowed to login to the datapoint server and receive as well as send information, including commands to open arbitrary doors. |
| The exos 9300 application can be used to configure Access Managers (e.g. 92xx, 9230 and 9290). The configuration is done in a graphical user interface on the dormakaba exos server. As soon as the save button is clicked in exos 9300, the whole configuration is sent to the selected Access Manager via SOAP. The SOAP request is sent without any prior authentication or authorization by default. Though authentication and authorization can be configured using IPsec for 92xx-K5 devices and mTLS for 92xx-K7 devices, it is not enabled by default and must therefore be activated with additional steps.
This insecure default allows an attacker with network level access to completely control the whole environment. An attacker is for example easily able to conduct the following tasks without prior authentication:
- Re-configure Access Managers (e.g. remove alarming system requirements)
- Freely re-configure the inputs and outputs
- Open all connected doors permanently
- Open all doors for a defined time interval
- Change the admin password
- and many more
Network level access can be gained due to an insufficient network segmentation as well as missing LAN firewalls. Devices with an insecure configuration have been identified to be directly exposed to the internet. |
| The Access Manager 92xx in hardware revision K7 is based on Linux instead of Windows CE embedded in older hardware revisions. In this new hardware revision it was noticed that an SSH service is exposed on port 22. By analyzing the firmware of the devices, it was noticed that there are two users with hardcoded and weak passwords that can be used to access the devices via SSH. The passwords can be also guessed very easily. The password of at least one user is set to a random value after the first deployment, with the restriction that the password is only randomized if the configured date is prior to 2022. Therefore, under certain circumstances, the passwords are not randomized. For example, if the clock is never set on the device, the battery of the clock module has been changed, the Access Manager has been factory reset and has not received a time yet. |
| An OS command injection vulnerability exists in various models of E-Series Linksys routers via the /tmUnblock.cgi and /hndUnblock.cgi endpoints over HTTP on port 8080. The CGI scripts improperly process user-supplied input passed to the ttcp_ip parameter without sanitization, allowing unauthenticated attackers to inject shell commands. This vulnerability was reported to be exploited in the wild by the "TheMoon" worm in 2014 to deploy a MIPS ELF payload, enabling arbitrary code execution on the router. Additionally, this vulnerability may affect other Linksys products to include, but not limited to, WAG/WAP/WES/WET/WRT-series router models and Wireless-N access points and routers. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-06 UTC. |
| An authenticated user can perform command injection via unsanitized input to the NetFax Server’s ping functionality via the /test.php endpoint. |
| An authenticated RCE vulnerability in Phoca Commander component 1.0.0-4.0.0 and 5.0.0-5.0.1 for Joomla was discovered. The issue allows code execution via the unzip feature. |
| Onyxia is a data science environment for kubernetes. In versions 4.6.0 through 4.8.0, Onyxia-API leaked the credentials of private helm repositories in the public (unauthenticated) /public/catalogs endpoint.vOnly instances using private helm repositories (i.e setting username & password in the catalogs configuration) are affected. This is fixed in version 4.9.0. |
| A code injection vulnerability exists in Yonyou UFIDA NC v6.5 and prior due to the exposure of the BeanShell testing servlet (bsh.servlet.BshServlet) without proper access controls. The servlet allows unauthenticated remote attackers to execute arbitrary Java code via the bsh.script parameter. This can be exploited to run system commands and ultimately gain full control over the target server. The issue is rooted in a third-party JAR component bundled with the application, and the servlet is accessible without authentication on vulnerable installations. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-05 UTC. |
| KUNBUS PiCtory versions 2.5.0 through 2.11.1 have an authentication bypass vulnerability where a remote attacker can bypass authentication to get access due to a path traversal. |
| An unauthenticated arbitrary file upload vulnerability exists in LibrettoCMS version 1.1.7 (and possibly earlier) contains an unauthenticated arbitrary file upload vulnerability in its File Manager plugin. The upload handler located at adm/ui/js/ckeditor/plugins/pgrfilemanager/php/upload.php fails to properly validate file extensions, allowing attackers to upload files with misleading extensions and subsequently rename them to executable .php scripts. This enables remote code execution on the server without authentication. |
| Rox, the software running BeWelcome, contains a PHP object injection vulnerability resulting from deserialization of untrusted data. User-controlled input is passed to PHP's unserialize(): the POST parameter `formkit_memory_recovery` in \\RoxPostHandler::getCallbackAction and the 'memory cookie' read by \\RoxModelBase::getMemoryCookie (bwRemember). (1) If present, `formkit_memory_recovery` is processed and passed to unserialize(), and (2) restore-from-memory functionality calls unserialize() on the bwRemember cookie value. Gadget chains present in Rox and bundled libraries enable exploitation of object injection to write arbitrary files or achieve remote code execution. Successful exploitation can lead to full site compromise. This vulnerability was remediated with commit c60bf04 (2025-06-16). |
| pwn.college DOJO is an education platform for learning cybersecurity. Prior to commit 467db0b9ea0d9a929dc89b41f6eb59f7cfc68bef, the /workspace endpoint contains an improper authentication vulnerability that allows an attacker to access any active Windows VM without proper authorization. The vulnerability occurs in the view_desktop function where the user is retrieved via a URL parameter without verifying that the requester has administrative privileges. An attacker can supply any user ID and arbitrary password in the request parameters to impersonate another user. When requesting a Windows desktop service, the function does not validate the supplied password before generating access credentials, allowing the attacker to obtain an iframe source URL that grants full access to the target user's Windows VM. This impacts all users with active Windows VMs, as an attacker can access and modify data on the Windows machine and in the home directory of the associated Linux machine via the Z: drive. This issue has been patched in commit 467db0b9ea0d9a929dc89b41f6eb59f7cfc68bef. No known workarounds exist. |
| The web management interface of Okcat Parking Management Platform from ZONG YU has a Missing Authentication vulnerability, allowing unauthenticated remote attackers to directly access system functions. These functions include opening gates, viewing license plates and parking records, and restarting the system. |
| The GPM from WormHole Tech has an Unverified Password Change vulnerability, allowing unauthenticated remote attackers to change any user's password and use the modified password to log into the system. |
