| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Integer overflow or wraparound in .NET allows an unauthorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix out-of-bounds read in broadcast Gap ACK blocks
A broadcast PROTOCOL/STATE_MSG can carry a Gap ACK blocks record in its
data area. tipc_get_gap_ack_blks() only verifies that the record's len
field is self-consistent with its ugack_cnt/bgack_cnt counts
(sz == struct_size(p, gacks, ugack_cnt + bgack_cnt)); it does not check
that the record actually fits in the message data area, msg_data_sz().
The unicast caller tipc_link_proto_rcv() bounds it ("if (glen > dlen)
break;"), but the broadcast caller tipc_bcast_sync_rcv() discards the
returned size, so tipc_link_advance_transmq() copies the record off the
receive skb with an attacker-controlled count:
this_ga = kmemdup(ga, struct_size(ga, gacks, ga->bgack_cnt),
GFP_ATOMIC);
A TIPC neighbour that negotiated TIPC_GAP_ACK_BLOCK triggers it with one
ordinary broadcast STATE_MSG (msg_bc_ack_invalid() clear), sized so its
data area is short, carrying a Gap ACK record with len = 0x400,
bgack_cnt = 0xff and ugack_cnt = 0. len then equals
struct_size(p, gacks, 255), so the consistency check passes and ga is
non-NULL; kmemdup() reads struct_size(ga, gacks, 255) = 1024 bytes out
of the much smaller skb:
BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x48/0x60
Read of size 1024 at addr ffff0000c7030d38 by task poc864/69
Call trace:
kmemdup_noprof+0x48/0x60
tipc_link_advance_transmq+0x86c/0xb80
tipc_link_bc_ack_rcv+0x19c/0x1e0
tipc_bcast_sync_rcv+0x1c4/0x2c4
tipc_rcv+0x85c/0x1340
tipc_l2_rcv_msg+0xac/0x104
The buggy address belongs to the object at ffff0000c7030d00
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 56 bytes inside of
allocated 704-byte region [ffff0000c7030d00, ffff0000c7030fc0)
The copied-out bytes are subsequently consumed as gap/ack values, but
the read is already out of bounds at the kmemdup() regardless of how
they are used.
The unicast STATE path drops such a message: "if (glen > dlen) break;"
skips the rest of STATE_MSG handling and the skb is freed. Make the
broadcast path drop it too. tipc_bcast_sync_rcv() now bounds the record
against msg_data_sz() and, when it does not fit, reports it back through
tipc_node_bc_sync_rcv() to tipc_rcv() so the skb is discarded rather than
processed. ga is not cleared on this path: ga == NULL already means
"legacy peer without Selective ACK", a distinct legitimate state. |
| util-linux versions through 2.41.5 and 2.42.2 fail to check mount helper exit status before running post-mount hooks, allowing unprivileged users to execute privileged operations on pre-existing filesystems. Attackers can exploit X-mount.idmap or X-mount.owner hooks to clone filesystems with inherited suid bits or modify target inode permissions after a helper fails, achieving privilege escalation. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix NULL pointer dereference in func_set_flag()
func_set_flag() dereferences tr->current_trace_flags before verifying
that the current tracer is actually the function tracer. When the active
tracer has been switched away from "function" (e.g., to "wakeup_rt"),
tr->current_trace_flags can be NULL, leading to a NULL pointer
dereference and kernel crash.
The call chain that triggers this is:
trace_options_write()
-> __set_tracer_option()
-> trace->set_flag() /* func_set_flag */
In func_set_flag(), the first operation is:
if (!!set == !!(tr->current_trace_flags->val & bit))
This dereferences tr->current_trace_flags unconditionally. The safety
check that guards against a non-function tracer:
if (tr->current_trace != &function_trace)
return 0;
is placed *after* the dereference, which is too late.
This was observed with the following crash dump:
BUG: unable to handle page fault at 0000000000000000
RIP: func_set_flag+0xd
Call Trace:
__set_tracer_option+0x27
trace_options_write+0x75
vfs_write+0x12a
ksys_write+0x66
do_syscall_64+0x5b
RIP: ffffffff914c973d RSP: ff67ec88b01dfdf0 RFLAGS: 00010202
RAX: 0000000000000000 RBX: ff3a826e80354580 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffffff93918080
The disassembly confirms the fault:
func_set_flag+0: mov 0x1f08(%rdi), %rax ; RAX = tr->current_trace_flags = NULL
func_set_flag+13: mov (%rax), %eax ; page fault: dereference NULL
At the time of the crash:
tr->current_trace_flags = 0x0 (NULL)
tr->current_trace = wakeup_rt_tracer (not function_trace)
The scenario is that a process opens a function tracer option file (such
as "func_stack_trace"), then the current tracer is switched to another
tracer (e.g., "wakeup_rt"), which sets current_trace_flags to NULL. When
the process subsequently writes to the option file, func_set_flag() is
invoked and crashes on the NULL dereference.
Fix this by moving the current_trace check before the
current_trace_flags dereference, so that func_set_flag() returns early
when the function tracer is not active. |
| In the Linux kernel, the following vulnerability has been resolved:
6lowpan: fix NHC entry use-after-free on error path
lowpan_nhc_do_uncompression() looks up an NHC descriptor while holding
lowpan_nhc_lock. If the descriptor has no uncompress callback, the error
path drops the lock before printing nhc->name.
lowpan_nhc_del() removes descriptors under the same lock and then relies
on synchronize_net() before the owning module can be unloaded. That only
waits for net RX RCU readers. lowpan_header_decompress() is also exported
and can be reached from callers that are not necessarily covered by the net
core RX critical section, for example the Bluetooth 6LoWPAN L2CAP receive
path.
This leaves a race where one task drops lowpan_nhc_lock in the error path,
another task unregisters and frees the matching descriptor after
synchronize_net() returns, and the first task then dereferences nhc->name
for the warning.
With the post-unlock window widened, KASAN reports:
BUG: KASAN: slab-use-after-free in lowpan_nhc_do_uncompression+0x1f4/0x220
Read of size 8
lowpan_nhc_do_uncompression
lowpan_header_decompress
Fix this by printing the warning before dropping lowpan_nhc_lock, so the
descriptor name is read while unregister is still excluded. The malformed
packet is still rejected with -ENOTSUPP. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/hv-gpci: fix preempt count leak in sysfs show paths
Four sysfs show() callbacks in hv-gpci take get_cpu_var(hv_gpci_reqb)
(which calls preempt_disable()) but only call the matching put_cpu_var()
on the error path under the 'out:' label. Every successful read leaks
one preempt_disable():
processor_bus_topology_show()
processor_config_show()
affinity_domain_via_virtual_processor_show()
affinity_domain_via_domain_show()
(affinity_domain_via_partition_show() was already correct.)
On a CONFIG_PREEMPT=y kernel, repeated reads raise preempt_count and
eventually return to userspace with preemption still disabled. The
next user-mode page fault then hits faulthandler_disabled() == 1,
gets forced to SIGSEGV, and the resulting coredump trips
'BUG: scheduling while atomic' in call_usermodehelper_exec ->
wait_for_completion_state -> schedule:
BUG: scheduling while atomic: <task>/<pid>/0x00000004
...
__schedule_bug+0x6c/0x90
__schedule+0x58c/0x13a0
schedule+0x48/0x1a0
schedule_timeout+0x104/0x170
wait_for_completion_state+0x16c/0x330
call_usermodehelper_exec+0x254/0x2d0
vfs_coredump+0x1050/0x2590
get_signal+0xb9c/0xc80
do_notify_resume+0xf8/0x470
Add an out_success label that calls put_cpu_var() before returning
the byte count, mirroring affinity_domain_via_partition_show(). |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix use-after-free in nvme_free_host_mem()
nvme_free_host_mem() frees dev->hmb_sgt via dma_free_noncontiguous()
but never clears the pointer afterward. This leads to a use-after-free
if nvme_free_host_mem() is called twice in the same error path.
This can happen during nvme_probe() when nvme_setup_host_mem() succeeds
in allocating the HMB (setting dev->hmb_sgt) but nvme_set_host_mem()
fails with an I/O error:
nvme_setup_host_mem()
nvme_alloc_host_mem_single() -> sets dev->hmb_sgt
nvme_set_host_mem() -> fails with -EIO
nvme_free_host_mem() -> frees hmb_sgt, but does NOT NULL it
return error
nvme_probe() error path:
nvme_free_host_mem() -> dev->hmb_sgt is stale, use-after-free
The second call dereferences the freed sgt, causing a NULL pointer
dereference in iommu_dma_free_noncontiguous() when it accesses
sgt->sgl->dma_address (the backing memory has been freed and zeroed).
This is reproducible on Thunderbolt-attached NVMe devices (e.g., OWC
Envoy Express behind a Dell WD22TB4 dock) where the device intermittently
returns I/O errors during HMB setup due to PCIe link instability.
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:iommu_dma_free_noncontiguous+0x22/0x80
Call Trace:
<TASK>
dma_free_noncontiguous+0x3b/0x130
nvme_free_host_mem+0x30/0xf0 [nvme]
nvme_probe.cold+0xcc/0x275 [nvme]
local_pci_probe+0x43/0xa0
pci_device_probe+0xeea/0x290
really_probe+0xf9/0x3b0
__driver_probe_device+0x8b/0x170
driver_probe_device+0x24/0xd0
__driver_attach_async_helper+0x6b/0x110
async_run_entry_fn+0x37/0x170
process_one_work+0x1ac/0x3d0
worker_thread+0x1b8/0x360
kthread+0xf7/0x130
ret_from_fork+0x2d8/0x3a0
ret_from_fork_asm+0x1a/0x30
</TASK>
Fix this by setting dev->hmb_sgt to NULL after freeing it, so the
second call takes the multi-descriptor path which safely handles the
already-cleaned-up state. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix bio leak on mapping failure
The local bio is always NULL, so we'd leak the bio if the integrity
mapping failed. Just get it directly from the request. |
| In the Linux kernel, the following vulnerability has been resolved:
irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT
On PREEMPT_RT, non-HARD irq_work runs in per-CPU kthreads via
run_irq_workd(), so irq_work_sync() uses rcuwait() to wait for BUSY==0.
After irq_work_single() clears BUSY via atomic_cmpxchg(), it still
dereferences @work for irq_work_is_hard() and rcuwait_wake_up().
An irq_work_sync() caller on another CPU that enters after BUSY is cleared
can observe BUSY==0 immediately, return, and free the work before those
accesses complete — causing a use-after-free.
Fix this by wrapping run_irq_workd() in guard(rcu)() so that the entire
irq_work_single() execution is within an RCU read-side critical
section. Then add synchronize_rcu() in irq_work_sync() after
rcuwait_wait_event() to ensure the caller waits for the RCU grace period
before returning, preventing premature frees. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/statmount: fix slab out-of-bounds write in statmount_mnt_idmap
statmount_mnt_idmap() writes one mapping with seq_printf() and then
manually advances seq->count to include the NUL separator.
If seq_printf() overflows, seq_set_overflow() sets seq->count to
seq->size. The manual seq->count++ changes this to seq->size + 1.
seq_has_overflowed() then no longer detects the overflow. The corrupted
count returns to statmount_string(), which later executes:
seq->buf[seq->count++] = '\0';
This causes a 1-byte NULL out-of-bounds write on the dynamically
allocated seq buffer.
Fix this by checking for overflow immediately after seq_printf(). |
| In the Linux kernel, the following vulnerability has been resolved:
fprobe: Fix unregister_fprobe() to wait for RCU grace period
Commit 4346ba1604093 ("fprobe: Rewrite fprobe on function-graph tracer")
changed fprobe to register struct fprobe to an rcu-hlist, but it forgot
to wait for RCU GP. Thus there can be use-after-free if the fprobe is
released right after unregistering. This can be happened on fprobe
event and sample module code.
To fix this issue, add synchronize_rcu() in unregister_fprobe().
Note that BPF is OK because fprobe is used as a part of
bpf_kprobe_multi_link. This unregisters its fprobe in
bpf_kprobe_multi_link_release() and it is deallocated via
bpf_kprobe_multi_link_dealloc(), which is invoked from
bpf_link_defer_dealloc_rcu_gp() RCU callback.
For BPF, this also introduced unregister_fprobe_async() which does
NOT wait for RCU grace priod. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bridge: eb_tables: close module init race
sashiko reports for unrelated patch:
Does the core ebtables initialization in ebtables.c suffer from a similar race?
Once nf_register_sockopt() completes, the sockopts are exposed globally.
sockopt has to be registered last, just like in ip/ip6/arptables. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: misc: usbio: fix disconnect UAF in client teardown
usbio_disconnect() walks usbio->cli_list in reverse and uninitializes each
auxiliary device. auxiliary_device_uninit() drops the device reference, and
for an unbound child that can run usbio_auxdev_release() and free the
containing struct usbio_client.
list_for_each_entry_reverse() advances after the loop body by reading
client->link.prev. If the current client is freed by
auxiliary_device_uninit(), the iterator dereferences freed memory.
Use list_for_each_entry_safe_reverse() so the previous client is
cached before the body can drop the final reference. This preserves
reverse teardown order while keeping the next iterator cursor independent
of the current client's lifetime.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in usbio_disconnect+0x12e/0x150
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
? usbio_disconnect+0x12e/0x150
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x188/0x320
? usbio_disconnect+0x12e/0x150
kasan_report+0xe0/0x110
? usbio_disconnect+0x12e/0x150
usbio_disconnect+0x12e/0x150
usb_unbind_interface+0xf3/0x400
really_probe+0x316/0x660
__driver_probe_device+0x106/0x240
driver_probe_device+0x4a/0x110
__device_attach_driver+0xf1/0x1a0
? __pfx___device_attach_driver+0x10/0x10
bus_for_each_drv+0xf9/0x160
? __pfx_bus_for_each_drv+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? trace_hardirqs_on+0x18/0x130
? srso_alias_return_thunk+0x5/0xfbef5
? _raw_spin_unlock_irqrestore+0x44/0x60
__device_attach+0x133/0x2a0
? __pfx___device_attach+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? do_raw_spin_unlock+0x9a/0x100
? srso_alias_return_thunk+0x5/0xfbef5
device_initial_probe+0x55/0x70
bus_probe_device+0x4a/0xd0
device_add+0x9b9/0xc10
? __pfx_device_add+0x10/0x10
? _raw_spin_unlock_irqrestore+0x44/0x60
? srso_alias_return_thunk+0x5/0xfbef5
? lockdep_hardirqs_on_prepare+0xea/0x1a0
? srso_alias_return_thunk+0x5/0xfbef5
? usb_enable_lpm+0x3c/0x260
usb_set_configuration+0xb64/0xf20
usb_generic_driver_probe+0x5f/0x90
usb_probe_device+0x71/0x1b0
really_probe+0x46b/0x660
__driver_probe_device+0x106/0x240
driver_probe_device+0x4a/0x110
__device_attach_driver+0xf1/0x1a0
? __pfx___device_attach_driver+0x10/0x10
bus_for_each_drv+0xf9/0x160
? __pfx_bus_for_each_drv+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? trace_hardirqs_on+0x18/0x130
? srso_alias_return_thunk+0x5/0xfbef5
? _raw_spin_unlock_irqrestore+0x44/0x60
__device_attach+0x133/0x2a0
? __pfx___device_attach+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? do_raw_spin_unlock+0x9a/0x100
? srso_alias_return_thunk+0x5/0xfbef5
device_initial_probe+0x55/0x70
bus_probe_device+0x4a/0xd0
device_add+0x9b9/0xc10
? __pfx_device_add+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? add_device_randomness+0xb7/0xf0
usb_new_device+0x492/0x870
hub_event+0x1b10/0x29c0
? __pfx_hub_event+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? lock_acquire+0x187/0x300
? process_one_work+0x475/0xb90
? srso_alias_return_thunk+0x5/0xfbef5
? lock_release+0xc8/0x290
? srso_alias_return_thunk+0x5/0xfbef5
process_one_work+0x4d7/0xb90
? __pfx_process_one_work+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? __list_add_valid_or_report+0x37/0xf0
? __pfx_hub_event+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x2d8/0x570
? __pfx_worker_thread+0x10/0x10
kthread+0x1ad/0x1f0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c9/0x540
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x2e9/0x730
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: move to two-stage removal scheme
Like previous patches for x_tables, follow same pattern in ebtables.
We can't reuse xt helpers: ebt_table struct layout is incompatible.
table->ops assignment is now done while still holding the ebt mutex
to make sure we never expose partially-filled table struct. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: add and use xtables_unregister_table_exit
Previous change added xtables_unregister_table_pre_exit to detach the
table from the packetpath and to unlink it from the active table list.
In case of rmmod, userspace that is doing set/getsockopt for this table
will not be able to re-instantiate the table:
1. The larval table has been removed already
2. existing instantiated table is no longer on the xt pernet table list.
This adds the second stage helper:
unlink the table from the dying list, free the hook ops (if any) and do
the audit notification. It replaces xt_unregister_table(). |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: do not cancel a policy conversion that never started
sel_write_load() calls selinux_policy_cancel() when sel_make_policy_nodes()
fails, and that helper dereferences the outgoing policy to cancel its
sidtab conversion. On the first policy load there is no outgoing policy:
security_load_policy() returns early for that case, before it converts
anything, and state->policy is still NULL. A first load that fails while
building the selinuxfs tree therefore takes a NULL dereference in
selinux_policy_cancel(), reached from a write(2) to /sys/fs/selinux/load.
Skip the cancel when there is no old policy, mirroring the check
security_load_policy() already makes before it converts. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: reject a class permission count below its inherited common
security_get_permissions() maps an inherited common's permissions into
an array sized by the class's own permissions.nprim, but class_read()
takes that nprim verbatim from the policy image and never checks that it
covers the common. A class that inherits a common of N permissions while
declaring a smaller nprim is accepted, and on load the common's
permissions are written past the class-sized array -- an out-of-bounds
heap write.
Reject a class whose permission count is below its inherited common's.
Well-formed policies, where the class count already includes the
inherited permissions, are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: initialise workingset state before folio split
xas_try_split() adds __GFP_ACCOUNT for page-cache xa_nodes, but
__folio_split() leaves the xa_state's xa_lru unset. That lets a live,
memcg-charged xa_node exist without being linked into the mapping's
shadow_nodes list_lru; when reclaim later walks the list_lru it trips
VM_WARN_ON(!css_is_dying()).
Use mapping_set_update() to install both the workingset update callback
and the shadow_nodes list_lru on the xa_state. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: TC, Check if flow is PEER before acquiring devcom lock
In case __mlx5e_add_fdb_flow() fails in lower levels, the flow is
deleted via mlx5e_tc_del_flow(), and mlx5e_tc_del_flow() is acquiring
ESW devcom lock without condition. In addition, in case of peer_flow,
__mlx5e_add_fdb_flow() is called while holding ESW devcom comp lock.
This results in an AA deadlock.
To fix this, introduce a new PEER flag that is set on flows created as
peer flows (the duplicate flows on peer devices), and check it in
mlx5e_tc_del_flow() before acquiring ESW devcom lock.
Lockdep splat:
============================================
WARNING: possible recursive locking detected
============================================
Possible unsafe locking scenario:
CPU0
----
lock(&comp->lock_key#2);
lock(&comp->lock_key#2);
*** DEADLOCK ***
Call Trace:
<TASK>
dump_stack_lvl+0x69/0xa0
print_deadlock_bug.cold+0xbd/0xca
__lock_acquire+0x1671/0x2ec0
lock_acquire+0x10e/0x2e0
down_read+0x95/0x430
mlx5_devcom_for_each_peer_begin+0x4e/0xe0 [mlx5_core]
mlx5e_tc_del_flow+0x11d/0xa70 [mlx5_core]
mlx5e_flow_put+0x99/0x100 [mlx5_core]
__mlx5e_add_fdb_flow+0x409/0xf00 [mlx5_core]
mlx5e_configure_flower+0x2a86/0x4100 [mlx5_core]
mlx5e_rep_setup_tc_cls_flower+0x12f/0x1b0 [mlx5_core]
mlx5e_rep_setup_tc_cb+0x153/0x750 [mlx5_core]
tc_setup_cb_add+0x1dc/0x470
fl_change+0x2f4d/0x626d [cls_flower]
tc_new_tfilter+0x79b/0x2310
rtnetlink_rcv_msg+0x778/0xad0
do_syscall_64+0x70/0x960
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
drm/log: Fix infinite loop when scale is too large for display
When scale is large enough that scaled_font exceeds the display
dimensions, rows or columns become 0. A columns value of 0 causes
an infinite loop in drm_log_draw_kmsg_record() because the loop
never decrements len.
Check for zero rows/columns in drm_log_setup_modeset() and return
an error, cleaning up the already allocated buffer to avoid a leak. |
