| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: drr: clamp quantum in change class
drr_change_class() rejects explicit quantum==0 but falls back to
psched_mtu() with no floor. With a crafted size table qdisc_pkt_len
reaches ~2 GiB, so quantum=1 (or a zero psched_mtu on a headerless
device) makes the deficit-refill loop spin under the qdisc lock.
Add clamp_t(u32, quantum, 256, 1<<20) after the zero reject and on the
fallback path. The explicit-zero reject is preserved.
Conditions to recreate the bug:
CONFIG_NET_SCH_DRR=y. Requires CAP_NET_ADMIN (namespace-local via
unshare -Urn suffices).
tc qdisc add dev dummy0 root drr
tc class add dev dummy0 parent 1: classid 1:1 drr quantum 1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: ets: clamp quantum in parse and fallback paths
ets_qdisc_change() falls back to psched_mtu() with no floor for bands
without an explicit quantum. With a crafted size table qdisc_pkt_len
reaches ~2 GiB, so a zero psched_mtu on a headerless device makes the
deficit-refill loop spin under the qdisc lock.
Move the floor into ets_quantum_parse() so explicitly configured quanta
are also clamped to [256, 1<<20], not just the fallback path.
Conditions to recreate the bug:
CONFIG_NET_SCH_ETS=y. Requires CAP_NET_ADMIN (namespace-local via
unshare -Urn suffices).
tc qdisc add dev dummy0 root ets bands 3 strict 2 quanta 1 1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: cortina: Fix budget accounting
The gmac_rx() function returns the remaining NAPI budget, but its
caller treats the return value as the number of packets received. An
idle poll therefore reports a full budget and remains scheduled.
Return the number of received packets instead. Preserve the existing
free queue refill accounting by adding that count directly; continuing
to subtract it from the budget would invert the refill behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: Don't replay RTM_GETCHAIN in tc_ctl_chain().
If a netlink socket sends RTM_GETCHAIN requests repeatedly
without recv()ing the responses, tc_ctl_chain() hogs CPU and
triggers Hung Task splat. [0]
As caught in the stack trace, netlink_attachskb() could confuse
tc_ctl_chain() by returning -EAGAIN when the userspace netlink
socket's receive buffer is full.
The replay: label exists since commit 32a4f5ecd738 ("net: sched:
introduce chain object to uapi") but was not used initially.
Since commit 9f407f1768d3 ("net: sched: introduce chain templates"),
the label is needed for RTM_NEWCHAIN because tcf_proto_lookup_ops()
may release RTNL to call request_module().
However, the replay logic is unnecessary for RTM_GETCHAIN.
Let's apply the replay logic only for RTM_NEWCHAIN.
[0]:
INFO: task repro:1018 is blocked on a mutex likely owned by task repro:1022.
task:repro state:R running task stack:14096 pid:1022 tgid:1014 ppid:961 task_flags:0x400040 flags:0x00080000
Call Trace:
<TASK>
? clockevents_program_event (kernel/time/clockevents.c:372)
? pskb_expand_head (net/core/skbuff.c:615)
? skb_release_data (net/core/skbuff.c:1122)
? netlink_attachskb (./include/linux/skbuff.h:1323 ./include/linux/skbuff.h:1332 net/netlink/af_netlink.c:1232)
? __netlink_lookup (./include/linux/rcupdate.h:882 ./include/linux/rhashtable.h:711 net/netlink/af_netlink.c:499)
? tc_chain_notify (net/sched/cls_api.c:3045)
? tc_chain_notify (./include/linux/skbuff.h:1384 net/sched/cls_api.c:3041)
? netlink_unicast (net/netlink/af_netlink.c:1335)
? rtnl_unicast (./include/net/netlink.h:1198 net/core/rtnetlink.c:985)
? tc_ctl_chain (net/sched/cls_api.c:3242)
? rtnetlink_rcv_msg (net/core/rtnetlink.c:7146)
? netlink_unicast (net/netlink/af_netlink.c:1354)
? __pfx_rtnetlink_rcv_msg (net/core/rtnetlink.c:7177)
? netlink_rcv_skb (net/netlink/af_netlink.c:2556)
? netlink_unicast (net/netlink/af_netlink.c:1319)
? netlink_sendmsg (net/netlink/af_netlink.c:1900)
? __sock_sendmsg (net/socket.c:800)
? __sys_sendto (net/socket.c:2281)
? __x64_sys_sendto (net/socket.c:2288 net/socket.c:2284 net/socket.c:2284)
? do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84)
? entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix hang for aborted WRITE_PENDING commands
When a LUN_RESET aborts a WRITE command that is in the
TRANSPORT_WRITE_PENDING state, the target core sets CMD_T_ABORTED and
waits for the frontend to finish processing.
If the initiator subsequently sends the remaining dataout PDUs,
__iscsit_check_dataout_hdr() catches the payload, stops the dataout
timer if the sequence is final and finally dumps the data. However, the
iSCSI target doesn't trigger the completion process for these aborted
commands. Because of this, the abort path hangs indefinitely in
target_put_cmd_and_wait(), leading to a deadlocked target worker thread.
Fix this by explicitly calling target_complete_cmd() when the final
dataout PDU is received for an aborted WRITE command.
target_complete_cmd() detects the CMD_T_ABORTED flag and cleanly routes
the command into target_abort_work, allowing the abort completion to
successfully unblock. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/drm_exec: fix up contended obj when num_objects is 0
drm_exec_prepare_array() silently returns success without calling
drm_exec_lock_contended() when num_objects is zero. This breaks the
invariant upheld by drm_exec_lock_obj(), where every entry point into
the locking sequence must first attempt to lock any previously
contended object before proceeding.
Drivers that chain multiple drm_exec_prepare_array() calls per
drm_exec_until_all_locked() iteration (e.g. amdgpu's userq signal/wait
ioctls, which prepare separate read and write BO arrays) can pass an
empty array for one of the two calls. If contention is hit while
preparing the non-empty array, exec->contended is set and the loop
retries; on retry, the empty-array call preceding it is a no-op that
never clears exec->contended, so drm_exec_retry_on_contention()
immediately jumps back to the top of the loop without ever reaching
the call that would resolve the contention. This spins forever.
Fix it by having drm_exec_prepare_array() call drm_exec_lock_contended()
directly when num_objects is zero, so a pending contended object dont
loop infinitely. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: Don't sleep inside rds_ib_conn_path_shutdown
New rds rdma self tests exposed a hang when tearing down
the ib network configs. This is caused by the shutdown worker
thread sleeping on the wait_event call, which blocks other work
items in the queue. Fix this by changing wait_event to
wait_event timeout, and looping until the wait check succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: core: hcd: fix possible deadlock in rh control transfers
>From within the SCSI error handler memory allocations must not
trigger IO. Handling errors in UAS and the storage driver may
involve resetting a device. The thread doing the reset itself
relies on VM magic. However, that is insufficient, as resetting
a device involves resuming it. Resumption as well as resetting
involves conrol transfers to the parent of the device to be reset.
That may be a root hub. Hence usbcore must heed the flags passed
to usb_submit_urb() processing control transfers to root hubs.
The problem exist since the storage driver has been merged. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250: fix possible ISR soft lockup
There are rare cases in which the host gets stuck in the ISR because it
is flooded with messages during the startup phase.
The reason for the soft lockup in the ISR is the missing FIFO error IRQ
(FIFOE) handling. Not handling it and reporting IRQ_HANDLED triggers
the IRQ immediately again.
Fix this by adding a check for the FIFOE status and clearing the FIFO
if no data is ready (DR).
This behavior was observed on an AM62L device which uses the OMAP 8250
driver. Fix it for all 8250 drivers, since the OMAP driver's special
IRQ setup handling may trigger this behavior more frequently, but it
is not ensured that other 8250 drivers aren't affected. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ibm: emac: mal: fix potential system hang in mal_remove()
napi_disable() is not idempotent and calling it on an already-disabled
or unenabled NAPI context will cause the kernel to spin indefinitely
waiting for the NAPI_STATE_SCHED bit to clear.
In mal_remove(), napi_disable() is called unconditionally. If no MACs were
registered, NAPI was never enabled. Also, if they were registered but
subsequently unregistered, NAPI was already disabled in
mal_unregister_commac(). In either case, calling napi_disable() causes
the kernel to hang upon module removal.
Fix this by only calling napi_disable() in mal_remove() if the commac list
is not empty (which implies NAPI is enabled). |
| Loop with unreachable exit condition ('infinite loop'), Improperly controlled modification of object prototype attributes ('prototype pollution') vulnerability in Apache Thrift NodeJS bindings with TJSONProtocol.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| A vulnerability was detected in GraphicsMagick up to 1.3.47. Affected by this vulnerability is the function ExtractPostscript of the file coders/wpg.c of the component WPG File Handler. Performing a manipulation results in uncontrolled recursion. The attack may be initiated remotely. The patch is named 627b5b1b2fc2. It is suggested to install a patch to address this issue. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| Uncaught exception, Loop with unreachable exit condition ('infinite loop'), Integer underflow (wrap or wraparound) vulnerability in Apache Thrift D language bindings.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| figlet.js is a FIG driver written in JavaScript that aims to implement the FIGfont specification. Prior to 1.11.3, text() and textSync() can enter an unbounded loop when whitespaceBreak is enabled and width is smaller than the rendered width of a single FIGlet character. Under these conditions, breakWord() cannot find a valid break point and returns without consuming a character, so generateFigTextLines() repeatedly processes the same input while consuming CPU and growing memory. The non-default option and attacker-controlled width must both reach an affected call. This issue is fixed in version 1.11.3. |
| Stack-based buffer overflow, Incorrect bitwise shift of integer vulnerability in Apache Thrift C++ THeaderProtocol.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| Improper validation of specified quantity in input, Allocation of resources without limits or throttling, Excessive Iteration vulnerability in Apache Thrift PHP bindings.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| iperf3 versions prior to 3.22 contains a denial of service vulnerability that allows unauthenticated remote attackers to crash-loop the server's UDP receive worker into an unrecoverable infinite loop by sending a single crafted control-channel parameter message followed by one 16-byte UDP datagram. Attackers can permanently pin the affected per-stream receive thread at approximately 100% CPU usage, rendering the server unusable until forcibly killed with SIGKILL, as the process does not respond to normal control-channel closure. |
| In JetBrains YouTrack before 2026.2.19422 doS attack was possible via crafted PSD attachments |
| Improper output encoding in DevTools in Google Chrome prior to 154.0.8037.57 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Improper Verification of Source of a Communication Channel in the ADS discovery of the Go implementation of Apache PLC4X (PLC4Go) allows an attacker able to send UDP datagrams to the discovering host to redirect subsequent connections to an arbitrary, attacker-chosen address. The discovery result's connection
address was derived from the AmsNetId claimed in the response body rather than from the datagram's actual source address. One spoofed discovery response can therefore insert an inventory entry pointing at any host, including hosts outside the local network, and an application that connects to discovered devices
will open its ADS session, including any configured route credentials, to that host.
Additionally, discovery listeners in both implementations can be disabled by a single malformed datagram:
- In PLC4Go ADS discovery, a short version block causes a panic that ends the listener for the rest of the discovery call, so legitimate devices answering afterwards are not reported.
- In PLC4J, the ADS and EtherNet/IP discoverers stop on an unhandled exception from a malformed response.
- The PLC4J Modbus discoverer can be made to spin indefinitely, consuming a CPU core, by a scanned host that sends a partial response.
Exploitation requires the application to invoke the discovery API, which is opt-in, and for the connection redirect, to act on the discovered items.
This issue affects Apache PLC4X: PLC4Go from 0.11.0 before 1.0.0; PLC4J ADS and Modbus drivers from 0.10.0 before 1.0.0; PLC4J EtherNet/IP driver from 0.11.0 before 1.0.0. PLC4Go is consumed as the Go module github.com/apache/plc4x/plc4go; versions refer to the corresponding Apache PLC4X releases.
Users are recommended to upgrade to version 1.0.0, which fixes the issue. Version 1.0.0 derives the connection address from the datagram's source address and logs a warning when the claimed AmsNetId disagrees with it. |
