| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Server receiving a malformed message that where the GCL message hostname may be too large which may cause a stack overflow; resulting in possible remote code execution. Honeywell recommends updating to the most recent version of the product. See Honeywell Security Notification for recommendations on upgrading and versioning.
|
| The redirect_to method in Rails allows provided values to contain characters which are not legal in an HTTP header value. This results in the potential for downstream services which enforce RFC compliance on HTTP response headers to remove the assigned Location header. |
| CWE-1104: Use of Unmaintained Third-Party Components vulnerability exists that could cause complete
control of the device when an authenticated user installs malicious code into HMI product. |
| CubeAPM nightly-2025-08-01-1 allow unauthenticated attackers to inject arbitrary log entries into production systems via the /api/logs/insert/elasticsearch/_bulk endpoint. This endpoint accepts bulk log data without requiring authentication or input validation, allowing remote attackers to perform unauthorized log injection. Exploitation may lead to false log entries, log poisoning, alert obfuscation, and potential performance degradation of the observability pipeline. The issue is present in the core CubeAPM platform and is not limited to specific deployment configurations. |
| The CleverDisplay BlueOne hardware player is designed with its USB interfaces physically enclosed and inaccessible under normal operating conditions. Researchers demonstrated that, after cicumventing the device’s protective enclosure, it was possible to connect a USB keyboard and press ESC during boot to access the BIOS setup interface. BIOS settings could be viewed but not modified. This behavior slightly increases the attack surface by exposing internal system information (CWE-1244) once the enclosure is removed, but does not allow integrity or availability compromise under standard or tested configurations. |
| CNCF K3s 1.32 before 1.32.4-rc1+k3s1 has a Kubernetes kubelet configuration change with the unintended consequence that, in some situations, ReadOnlyPort is set to 10255. For example, the default behavior of a K3s online installation might allow unauthenticated access to this port, exposing credentials. |
| Debug code left active in AMD's Video Decoder Engine Firmware (VCN FW) could allow a attacker to submit a maliciously crafted command causing the VCN FW to perform read/writes HW registers, potentially impacting confidentiality, integrity and availabilability of the system. |
| CWE-1188: Initialization of a Resource with an Insecure Default vulnerability exists that could potentially lead to
unauthorized access which could result in the loss of confidentially, integrity and availability when a malicious
user, having physical access, sets the radio to the factory default mode. |
| IBM MQ Operator (SC2 v3.2.0–3.8.1, LTS v2.0.0–2.0.29) and IBM‑supplied MQ Advanced container images (across affected SC2, CD, and LTS 9.3.x–9.4.x releases) contain a vulnerability where log messages are not properly neutralized before being written to log files. This flaw could allow an unauthorized user to inject malicious data into MQ log entries, potentially leading to misleading logs, log manipulation, or downstream log‑processing issues. |
| A vulnerability was found in MicroDicom DICOM Viewer 2025.1 Build 3321. It has been classified as critical. Affected is an unknown function of the file mDicom.exe. The manipulation leads to memory corruption. The attack needs to be approached locally. It is recommended to upgrade the affected component. The vendor quickly confirmed the existence of the vulnerability and fixed it in the latest beta. |
| The ParseAddressList function incorrectly handles comments (text within parentheses) within display names. Since this is a misalignment with conforming address parsers, it can result in different trust decisions being made by programs using different parsers. |
| A vulnerability classified as critical was found in symisc UnQLite up to 957c377cb691a4f617db9aba5cc46d90425071e2. This vulnerability affects the function jx9MemObjStore of the file /data/src/benchmarks/unqlite/unqlite.c. The manipulation leads to heap-based buffer overflow. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. |
| get-jwks contains fetch utils for JWKS keys. In versions prior to 11.0.2, a vulnerability in get-jwks can lead to cache poisoning in the JWKS key-fetching mechanism. When the iss (issuer) claim is validated only after keys are retrieved from the cache, it is possible for cached keys from an unexpected issuer to be reused, resulting in a bypass of issuer validation. This design flaw enables a potential attack where a malicious actor crafts a pair of JWTs, the first one ensuring that a chosen public key is fetched and stored in the shared JWKS cache, and the second one leveraging that cached key to pass signature validation for a targeted iss value. The vulnerability will work only if the iss validation is done after the use of get-jwks for keys retrieval. This issue has been patched in version 11.0.2. |
| Unauthenticated log effects metrics gathering incident response efforts and potentially exposes risk of injection attacks (ex log injection). |
| Improper buffer restrictions in some Intel(R) System Security Report and System Resources Defense firmware may allow a privileged user to potentially enable escalation of privilege via local access. |
| A vulnerability was identified in floooh sokol up to 5d11344150973f15e16d3ec4ee7550a73fb995e0. The impacted element is the function _sg_validate_pipeline_desc in the library sokol_gfx.h. Such manipulation leads to stack-based buffer overflow. The attack must be carried out locally. The exploit is publicly available and might be used. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The name of the patch is b95c5245ba357967220c9a860c7578a7487937b0. It is best practice to apply a patch to resolve this issue. |
| z2d is a pure Zig 2D graphics library. Versions of z2d after `0.5.1` and up to and including `0.6.0`, when writing from one surface to another using `z2d.compositor.StrideCompositor.run`, and higher-level operations when the anti-aliasing mode is set to `.default` (such as `Context.fill`, `Context.stroke`, `painter.fill`, and `painter.stroke`), the source surface can be completely out-of-bounds on the x-axis, but not on the y-axis, by way of a negative offset. This results in an overflow of the value controlling the length of the stride. In non-safe optimization modes (consumers compiling with `ReleaseFast` or `ReleaseSmall`), this could potentially lead to invalid memory accesses or corruption.
This issue is patched in version `0.6.1`. Users on an untagged version after `v0.5.1` and before `v0.6.1` are advised to update to address the vulnerability. Those still on Zig `0.13.0` are recommended to downgrade to `v0.5.1`. |
| The exos 9300 application can be used to configure Access Managers (e.g. 92xx, 9230 and 9290). The configuration is done in a graphical user interface on the dormakaba exos server. As soon as the save button is clicked in exos 9300, the whole configuration is sent to the selected Access Manager via SOAP. The SOAP request is sent without any prior authentication or authorization by default. Though authentication and authorization can be configured using IPsec for 92xx-K5 devices and mTLS for 92xx-K7 devices, it is not enabled by default and must therefore be activated with additional steps.
This insecure default allows an attacker with network level access to completely control the whole environment. An attacker is for example easily able to conduct the following tasks without prior authentication:
- Re-configure Access Managers (e.g. remove alarming system requirements)
- Freely re-configure the inputs and outputs
- Open all connected doors permanently
- Open all doors for a defined time interval
- Change the admin password
- and many more
Network level access can be gained due to an insufficient network segmentation as well as missing LAN firewalls. Devices with an insecure configuration have been identified to be directly exposed to the internet. |
| A weakness has been identified in bftpd up to 6.2. Impacted is the function expand_groups of the file options.c of the component Configuration File Handler. Executing a manipulation can lead to heap-based buffer overflow. It is possible to launch the attack on the local host. Attacks of this nature are highly complex. The exploitability is considered difficult. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in PX4-Autopilot 1.12.3. It has been classified as problematic. This affects the function MavlinkReceiver::handle_message_trajectory_representation_waypoints of the file mavlink_receiver.cpp of the component TRAJECTORY_REPRESENTATION_WAYPOINTS Message Handler. The manipulation leads to stack-based buffer overflow. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. |
