Export limit exceeded: 395193 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395193 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89814 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: clamp the isolation index for rings outside a partition adev->isolation[] has one slot per partition, but a ring that is not assigned to one keeps AMDGPU_XCP_NO_PARTITION, which is ~0, so indexing the array with it is out of bounds. SDMA submissions hit this on both the isolation enforcement and the VM flush path and trip UBSAN. Fall back to the first slot the way the cleaner shader path already does, and stop taking the address before the ring type check that makes it relevant. | ||||
| CVE-2026-89819 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: validate plane degamma LUT size for private color prop Unlike the CRTC degamma path, which is guarded by amdgpu_dm_verify_lut_sizes(), the per-plane degamma LUT size was never validated before use. __set_dm_plane_degamma() passed the user-supplied size straight into __is_lut_linear() and, for a non-linear LUT, into __set_input_tf() -> __drm_lut_to_dc_gamma(), the latter always iterating MAX_COLOR_LUT_ENTRIES entries regardless of the actual LUT size. A malformed AMD_PLANE_DEGAMMA_LUT blob (e.g. a single entry) could thus trigger a divide-by-zero in __is_lut_linear() or an out-of-bounds read in __drm_lut_to_dc_gamma(). Reject any plane degamma LUT whose size does not match MAX_COLOR_LUT_ENTRIES, mirroring the invariant the code already asserts a few lines below (and which the CRTC path enforces). The AMD_PLANE_DEGAMMA_LUT property is only exposed on builds with AMD_PRIVATE_COLOR defined. | ||||
| CVE-2026-89820 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix dc_lock leak on GPU reset error paths On GPU reset, dm_suspend() takes dc_lock and leaves it for dm_resume() to drop. If amdgpu_dm_commit_zero_streams() or dm_dmub_hw_init() fails, the function returns with the lock still held. The matching resume path is then skipped, so every later dc_lock take hangs. Release the cached DC state and unlock before returning the error. | ||||
| CVE-2026-89821 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: avoid divide-by-zero in __is_lut_linear() __is_lut_linear() computes the expected value of each entry with expected = i * MAX_DRM_LUT_VALUE / (size - 1); If it is ever called with a single-entry LUT, size - 1 is zero and the kernel takes a divide error (#DE). A LUT with fewer than two entries cannot describe a linear mapping anyway, so return false early instead of dividing by zero. | ||||
| CVE-2026-89822 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: Guard against NULL driver_data in i915_pci_probe() pci_match_device() can return the dummy pci_device_id_any entry when a device is force-bound via sysfs driver_override, in which case ->driver_data is unset (NULL). i915_pci_probe() casts it to struct intel_device_info * unconditionally and dereferences intel_info->require_force_probe, causing a NULL-ptr-deref. (cherry picked from commit 2727922084672cc274ecea726ea00363c2893731) | ||||
| CVE-2026-89825 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: fix firmware control interface bounds checks panthor_init_cs_iface() and panthor_init_csg_iface() validate firmware control interface offsets with 32-bit arithmetic and the size of the host wrapper structures. The offsets are derived from firmware-provided strides, so the arithmetic can wrap before the bounds check, and the host wrapper size is not the size of the firmware control interface being mapped. Use 64-bit arithmetic for the computed offsets and validate against the actual firmware control interface structure sizes with subtraction-based bounds checks. Also validate that the shared section is large enough for the global control interface before using it. | ||||
| CVE-2026-89826 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: harden firmware build-info bounds checks panthor_fw_read_build_info() checks whether the metadata range fits in the firmware image with hdr.meta_start + hdr.meta_size. Both fields are u32, so the addition can wrap and let an out-of-bounds range pass validation. The function also reads the "git_sha: " prefix without first checking that the metadata is long enough, and meta_size == 0 can underflow the NULL terminator index. Use subtraction-based bounds checking and reject metadata that is too short to contain the expected prefix and trailing NULL byte. | ||||
| CVE-2026-89827 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: avoid force-completing uninitialized UVD rings uvd_v7_0_sw_init() does not initialize the UVD decode ring for an SR-IOV VF. However, amdgpu_uvd_resume() unconditionally force-completes the decode ring when restoring its fence sequence. Skip fence completion when the fence driver is not initialized. | ||||
| CVE-2026-89853 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix FCE trace use-after-free during firmware dump qla2x00_free_fce_trace() freed and cleared ha->fce while holding only fce_mutex. The firmware-dump consumers qla27xx_fwdt_entry_t264() and qla25xx_copy_fce() read ha->fce (NULL check followed by a copy of the buffer) under hardware_lock and never take fce_mutex. A debugfs FCE disable could therefore free the DMA buffer between a dump's NULL check and its copy, resulting in a use-after-free. Unpublish ha->fce under hardware_lock, then release the lock and free the DMA buffer (dma_free_coherent() may sleep). A concurrent dump either completes its check and copy with the buffer still valid, or observes ha->fce == NULL and skips it. | ||||
| CVE-2026-89855 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Serialize flash version read in reset handler The "update cache versions without reset" sysfs reset operation (0x20261) calls get_flash_version(), which reads hardware flash registers, without holding ha->optrom_mutex. The VPD update path serializes the same call under optrom_mutex, so this reset path can interleave its flash register accesses with a concurrent VPD or optrom flash operation and corrupt the reads. Hold ha->optrom_mutex across the get_flash_version() call to match the VPD update path. | ||||
| CVE-2026-89862 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix BSG job leak on validate flash image error path qla28xx_validate_flash_image() returns QLA_SUCCESS (0) unconditionally, telling the FC BSG transport (fc_bsg_host_dispatch()) that the driver owns and will complete the request. But bsg_job_done() is guarded by "if (!rval)", so on the error path (rval == -EINVAL) neither the driver nor the transport completes the job. The request dangles until it times out, leaking block layer resources. Commit c2c68225b145 ("scsi: qla2xxx: Fix bsg_done() causing double free") added the "if (!rval)" guard to a batch of BSG handlers. That is correct for handlers that also return the error code (the transport then completes the job once via fail_host_msg), but this function returns QLA_SUCCESS unconditionally, so the guard turned a correct single completion into a leak. Always call bsg_job_done(): bsg_reply->result is DID_OK and the error is reported in vendor_rsp[0], and since the function returns 0 the transport will not complete the job a second time. | ||||
| CVE-2025-43936 | 1 Dell | 1 Objectscale | 2026-09-18 | 8.1 High |
| Dell ObjectScale, versions prior to ObjectScale 4.4.0.0, contains an Improper Authentication vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access. | ||||
| CVE-2026-61595 | 1 Djust-org | 1 Djust | 2026-09-18 | 7.7 High |
| djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, `djust.tenants` isolation was enforced only on the HTTP path. The current tenant was stored in `threading.local()` and set exclusively by the HTTP-only `TenantMiddleware`, so on the live (WebSocket/SSE) path `get_current_tenant()` was always `None` during mount and every event handler — and the tenant-aware `QuerySet` manager failed OPEN (returned the unfiltered queryset, ignoring `STRICT_MODE`), disclosing every tenant's rows to whoever held the socket. `threading.local` was additionally shared across connections on the `sync_to_async` executor thread. This issue is fixed in djust 1.0.7. Tenant storage moved to a `contextvars.ContextVar` (per async task); the resolved tenant is bound around WS/SSE mount and every dispatch; both managers scope the base queryset once and fail CLOSED (`.none()` under the default `STRICT_MODE`); and system check S006 warns when `STRICT_MODE=False`. No known workarounds are available on the live path. | ||||
| CVE-2026-89832 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to clear dirty flag on folio in error path If node block is corrupted due to chksum mismatch or inconsistent footer info, it needs to drop clear flag of node folio, in order to persist inconsistent node data to storage. | ||||
| CVE-2026-89838 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: limit recovery filename logging to stored length F2FS stores recovery filenames as a length plus a fixed-size i_name buffer. The buffer is not NUL-terminated, but recover_inode() and recover_dentry() print it with %s. For a 255-byte filename, recovery logging can read past i_name into the following raw inode fields. Print the name with a precision bounded by i_namelen and F2FS_NAME_LEN. | ||||
| CVE-2026-89839 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: use the mount idmap for the owner check in f2fs_xattr_advise_set() f2fs_xattr_advise_set() calls inode_owner_or_capable() with &nop_mnt_idmap before allowing the "system.advise" xattr to be set, instead of the idmap that the VFS passes to the ->set() handler. f2fs supports idmapped mounts, so on such a mount this checks the caller's fsuid against the unmapped on-disk owner rather than the mapped owner: the actual owner can be wrongly denied with -EPERM and an unrelated caller wrongly allowed. Pass the handler's idmap instead. | ||||
| CVE-2026-89840 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: validate MOVE_RANGE destination size F2FS_IOC_MOVE_RANGE checks the source range, but not the destination end before updating i_size. A source hole can expose this: __clone_blkaddrs() skips NULL_ADDR entries and returns success, so the caller can still extend the destination inode with unchecked pos_out + len. Reject destination overflow and use inode_newsize_ok() before extending the destination inode. | ||||
| CVE-2026-89841 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: only redirty pinned folios in redirty_blocks redirty_blocks() pins folios with read_cache_folio() and then walks the same range again with filemap_lock_folio() to redirty them and drop the references it took. Commit 5951fee46bef ("f2fs: Use a folio in redirty_blocks()") changed the second pass to a do/while loop. If read_cache_folio() fails before anything is pinned, page_idx does not advance but the cleanup loop still runs once. If readahead has already populated the failed folio in page cache, that extra iteration finds it and folio_put_refs(folio, 2) drops one reference too many. Later drop_caches or reclaim can then report "BUG: Bad page state". Only redirty the range that was pinned successfully. | ||||
| CVE-2026-89842 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Skip NVMe LS reject IOCB when FW not started qla_nvme_xmt_ls_rsp() bails out to the out: label when firmware is not started (!ha->flags.fw_started), but the out: path unconditionally calls qla_nvme_ls_reject_iocb(), which ends in qla2x00_start_iocbs() and an unconditional doorbell write to the request queue in-pointer register. This rings the firmware doorbell and queues an IOCB that stopped or resetting firmware cannot consume, and touches MMIO during the reset/EEH window where fw_started is also clear. Only emit the LS reject IOCB (and ring the doorbell) when fw_started is set; otherwise just clean up and return. The post-allocation failure cases (SRB alloc / qla2x00_start_sp() failure) run with firmware started and still send the reject. Apply the same guard to the reject emission in qla2xxx_process_purls_pkt(). | ||||
| CVE-2026-89846 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Bound rsp_info_len to avoid OOB sense-data read In qla2x00_status_entry(), the FWI2 status path advances sense_data and shrinks par_sense_len by rsp_info_len: if (IS_FWI2_CAPABLE(ha)) { sense_data += rsp_info_len; par_sense_len -= rsp_info_len; } rsp_info_len is a 32-bit value taken directly from the target's FCP response (sf.rsp_data_len), while par_sense_len is the IOCB data area size (28 bytes for 24xx, 60 bytes for 29xx). A hostile or buggy target reporting an rsp_info_len larger than par_sense_len makes the unsigned subtraction underflow to a huge value and advances sense_data out of bounds. The underflowed par_sense_len then defeats the cap in qla2x00_handle_sense(): if (sense_len > par_sense_len) sense_len = par_sense_len; memcpy(cp->sense_buffer, sense_data, sense_len); so the memcpy reads up to SCSI_SENSE_BUFFERSIZE bytes from the out-of-bounds sense_data pointer, leaking adjacent response-ring/heap memory into the command's sense buffer. Clamp rsp_info_len to par_sense_len before the subtraction so par_sense_len can never underflow and sense_data stays within the IOCB data area. The fix sits before the comp_status switch, covering both qla2x00_handle_sense() call sites. | ||||