| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the IPv6 DHCP (DHCPv6) client module of Cisco Adaptive Security Appliance (ASA) Software, Cisco Firepower Threat Defense (FTD) Software, Cisco IOS Software, and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of DHCPv6 messages. An attacker could exploit this vulnerability by sending crafted DHCPv6 messages to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: To successfully exploit this vulnerability, the attacker would need to either control the DHCPv6 server or be in a man-in-the-middle position. |
| Multiple Cisco products are affected by a vulnerability in Snort access control policies that could allow an unauthenticated, remote attacker to bypass the configured policies on an affected system.
This vulnerability is due to a logic error that occurs when the access control policies are being populated. An attacker could exploit this vulnerability by establishing a connection to an affected device. A successful exploit could allow the attacker to bypass configured access control rules on the affected system. |
| A vulnerability in the web services of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software, Cisco Secure Firewall Threat Defense (FTD) Software, Cisco IOS Software, Cisco IOS XE Software, and Cisco IOS XR Software could allow an unauthenticated, remote attacker (Cisco ASA and FTD Software) or authenticated, remote attacker (Cisco IOS, IOS XE, and IOS XR Software) with low user privileges to execute arbitrary code on an affected device.
This vulnerability is due to improper validation of user-supplied input in HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted web service on an affected device after obtaining additional information about the system, overcoming exploit mitigations, or both. A successful exploit could allow the attacker to execute arbitrary code as root, which may lead to the complete compromise of the affected device.
For more information about this vulnerability, see the Details ["#details"] section of this advisory. |
| A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS XE Software could allow an authenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper error handling when parsing SNMP requests. This vulnerability affects all versions of SNMP — Versions 1, 2c, and 3. An attacker could exploit this vulnerability by sending a malformed SNMP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly. The attacker must have the SNMPv1 or v2c read-only or read-write community string or valid SNMPv3 user credentials on the affected device. |
| A vulnerability in the Blocks Extensible Exchange Protocol (BEEP) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper handling when parsing a specific BEEP SOAP request. An attacker could exploit this vulnerability by sending a specific BEEP SOAP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition. |
| A vulnerability in the web-based management interface of Cisco IOS XE Software could allow an authenticated, remote attacker with low privileges to perform a denial of service (DoS) attack against an affected device.
This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web-based management interface of an affected device. A successful exploit could allow the attacker to cause the web-based management interface to become unresponsive. |
| A vulnerability in the Extensible Messaging Client Protocol (XMCP), also referred to as the External Client protocol, of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper handling of malformed XMCP packets. An attacker could exploit this vulnerability by sending a malformed XMCP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload unexpectedly, resulting in a DoS condition. The attacker does not need the XMCP client username to exploit this vulnerability. |
| A vulnerability in the web-based management interface of Cisco IOS XE Software could allow an authenticated, remote attacker with low privileges to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to insufficient error handling in the web-based management interface. An attacker could exploit this vulnerability by authenticating with a malformed certificate. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. |
| Multiple cross-site request forgery (CSRF) vulnerabilities in the HTTP Administration component in Cisco IOS 12.4 on the 871 Integrated Services Router allow remote attackers to execute arbitrary commands via (1) a certain "show privilege" command to the /level/15/exec/- URI, and (2) a certain "alias exec" command to the /level/15/exec/-/configure/http URI. NOTE: some of these details are obtained from third party information. |
| ICMP information such as (1) netmask and (2) timestamp is allowed from arbitrary hosts. |
| Memory leak in the Session Initiation Protocol (SIP) implementation in Cisco IOS 12.2 through 12.4, when VoIP is configured, allows remote attackers to cause a denial of service (memory consumption and voice-service outage) via unspecified valid SIP messages. |
| Cisco IOS 12.4 allows remote attackers to cause a denial of service (device crash) via a normal, properly formed SSL packet that occurs during termination of an SSL session. |
| Unspecified vulnerability in the Session Initiation Protocol (SIP) implementation in Cisco IOS 12.2 through 12.4 and Unified Communications Manager 4.1 through 6.1, when VoIP is configured, allows remote attackers to cause a denial of service (device or process reload) via unspecified valid SIP messages, aka Cisco Bug ID CSCsu38644, a different vulnerability than CVE-2008-3801 and CVE-2008-3802. |
| Multiple unspecified vulnerabilities in the SSH server in Cisco IOS 12.4 allow remote attackers to cause a denial of service (device restart) via unknown vectors, aka Bug ID (1) CSCsk42419, (2) CSCsk60020, and (3) CSCsh51293. |
| Unspecified vulnerability in the Multicast Virtual Private Network (MVPN) implementation in Cisco IOS 12.0, 12.2, 12.3, and 12.4 allows remote attackers to create "extra multicast states on the core routers" via a crafted Multicast Distribution Tree (MDT) Data Join message. |
| The SERVICE.DNS signature engine in the Intrusion Prevention System (IPS) in Cisco IOS 12.3 and 12.4 allows remote attackers to cause a denial of service (device crash or hang) via network traffic that triggers unspecified IPS signatures, a different vulnerability than CVE-2008-1447. |
| Unspecified vulnerability in the Session Initiation Protocol (SIP) implementation in Cisco IOS 12.2 through 12.4 and Unified Communications Manager 4.1 through 6.1, when VoIP is configured, allows remote attackers to cause a denial of service (device or process reload) via unspecified valid SIP messages, aka Cisco Bug ID CSCsm46064, a different vulnerability than CVE-2008-3800 and CVE-2008-3802. |
| Memory leak in the virtual private dial-up network (VPDN) component in Cisco IOS before 12.3 allows remote attackers to cause a denial of service (memory consumption) via a series of PPTP sessions, related to "dead memory" that remains allocated after process termination, aka bug ID CSCsj58566. |
| SNMPv3 HMAC verification in (1) Net-SNMP 5.2.x before 5.2.4.1, 5.3.x before 5.3.2.1, and 5.4.x before 5.4.1.1; (2) UCD-SNMP; (3) eCos; (4) Juniper Session and Resource Control (SRC) C-series 1.0.0 through 2.0.0; (5) NetApp (aka Network Appliance) Data ONTAP 7.3RC1 and 7.3RC2; (6) SNMP Research before 16.2; (7) multiple Cisco IOS, CatOS, ACE, and Nexus products; (8) Ingate Firewall 3.1.0 and later and SIParator 3.1.0 and later; (9) HP OpenView SNMP Emanate Master Agent 15.x; and possibly other products relies on the client to specify the HMAC length, which makes it easier for remote attackers to bypass SNMP authentication via a length value of 1, which only checks the first byte. |
| The data-link switching (DLSw) component in Cisco IOS 12.0 through 12.4 allows remote attackers to cause a denial of service (device restart or memory consumption) via crafted (1) UDP port 2067 or (2) IP protocol 91 packets. |
