| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: keembay - Fix AEAD unregister count in error path
register_aes_algs() registers the AEAD algorithms before registering the
skcipher algorithms. If skcipher registration fails, the function unwinds
the earlier AEAD registration with crypto_engine_unregister_aeads(), but it
passes ARRAY_SIZE(algs), which is the skcipher table size.
Use ARRAY_SIZE(algs_aead) for the AEAD unwind path so the unregister helper
iterates over the same table that was registered. Also clarify the nearby
comment: the crypto registration helpers clean up algorithms registered
within the same call, while this function must still unwind earlier
successful registration steps. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/rstat: validate cpu before css_rstat_cpu() access
css_rstat_updated() is exposed as a BPF kfunc and accepts a
caller-provided cpu argument. The function uses cpu for per-cpu rstat
lookups without checking whether it refers to a valid possible CPU.
A BPF iter/cgroup program with CAP_BPF and CAP_PERFMON can pass an
invalid cpu value. On an unfixed UBSCAN_BOUNDS test kernel, cpu ==
0x7fffffff triggers:
UBSAN: array-index-out-of-bounds in kernel/cgroup/rstat.c:31:9
index 2147483647 is out of range for type 'long unsigned int [64]'
Call Trace:
css_rstat_updated
bpf_iter_run_prog
cgroup_iter_seq_show
bpf_seq_read
Add cpu validation to the BPF-facing css_rstat_updated() kfunc and
move the common implementation to __css_rstat_updated() for in-kernel
callers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Implement bounds check for stream encoder creation in DCN401
'stream_enc_regs' array is an array of dcn10_stream_enc_registers
structures. The array is initialized with four elements, corresponding
to the four calls to stream_enc_regs() in the array initializer. This
means that valid indices for this array are 0, 1, 2, and 3.
The error message 'stream_enc_regs' 4 <= 5 below, is indicating that
there is an attempt to access this array with an index of 5, which is
out of bounds. This could lead to undefined behavior
Here, eng_id is used as an index to access the stream_enc_regs array. If
eng_id is 5, this would result in an out-of-bounds access on the
stream_enc_regs array.
Thus fixing Buffer overflow error in dcn401_stream_encoder_create
Found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn401/dcn401_resource.c:1209 dcn401_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check link_index before accessing dc->links[]
[WHY & HOW]
dc->links[] has max size of MAX_LINKS and NULL is return when trying to
access with out-of-bound index.
This fixes 3 OVERRUN and 1 RESOURCE_LEAK issues reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix index may exceed array range within fpu_update_bw_bounding_box
[Why]
Coverity reports OVERRUN warning. soc.num_states could
be 40. But array range of bw_params->clk_table.entries is 8.
[How]
Assert if soc.num_states greater than 8. |
| Helm through 4.2.3, fixed in commit ba6c9a2, contains a denial of service vulnerability in the Files.Lines template helper in pkg/engine/files.go that allows attackers to trigger an index out of range panic by including zero-length byte slices in chart files. Attackers can include empty files in Helm charts to cause deterministic render failures across template, install, upgrade, lint, and SDK Engine.Render operations. |
| vLLM from 0.20.1 before 0.29.0 contains an improper input validation vulnerability that allows remote attackers to crash the engine by supplying out-of-vocabulary stop_token_ids. Attackers can send OpenAI chat, completion, generate, or batch requests with invalid IDs to terminate the engine or write outside the V2 runner's logits buffer. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. From 4.1.0 until 4.2.0, Svc::GenericHub output-port dispatch is vulnerable because the deserialized port field is passed to serialOut_out, bufferOut_out, eventOut_out, or tlmOut_out without an explicit range check. When a remote hub packet supplies a port index outside the configured output-port array, assert-enabled builds abort, while builds without assertions can access an output-port array out of bounds, corrupt heap memory, and potentially allow remote code execution. This issue is fixed in version 4.2.0. |
| RPly through 1.1.4 contains an improper array index validation vulnerability in ply_read_header_property() that accepts list as a list property's length or value type. Attackers can supply a crafted PLY file that makes ply_read_list_property() call an out-of-bounds handler, crashing ASCII parsing or corrupting memory in binary parsing. |
| An out-of-bounds read vulnerability in the FireCluster Sync processing allows an attacker positioned on the cluster interconnect, such as a compromised cluster peer or an on-path network attacker, to repeatedly crash the firewall's cluster synchronization process by sending specially crafted network traffic, resulting in a sustained denial of service. |
| Incorrect boundary conditions in the Layout: Text and Fonts component. This vulnerability was fixed in Firefox 159, Firefox ESR 153.6, Thunderbird 159, and Thunderbird 153.6. |
| Incorrect boundary conditions in the Security: PSM component. This vulnerability was fixed in Firefox 159, Firefox ESR 115.44, Firefox ESR 153.6, Thunderbird 159, and Thunderbird 153.6. |
| Improper validation of a BSON array length in the MongoDB Go Driver can cause an out-of-bounds index and runtime panic when an application calls bson.RawArray.Validate or bsoncore.Array.Validate on a malformed four-byte array. An unauthenticated actor who can supply raw BSON array data to an affected application may terminate an unprotected application process, causing a denial of service. No confidentiality or integrity impact has been identified. |
| Furnace through 0.6.8.3 contains an out-of-bounds write vulnerability in DivEngine::loadFTM() that allows attackers to corrupt heap memory via an unchecked subsong index in the GROOVES block. Attackers can craft a FamiTracker module with a subsong count of 2 or more to write a groove pattern past the subsong vector, crashing Furnace when opened. |
| A stack-based buffer overflow vulnerability in Fireware OS's VPN Network Access Enforcement process allows an authenticated mobile VPN user to create a denial of service condition and potentially execute arbitrary code as an unprivileged process by sending a specially crafted request. |
| llama.cpp before b3701 contains an out-of-bounds read vulnerability in llama_decode_internal and llama_encode_internal that allows remote unauthenticated attackers to read memory by supplying unvalidated token IDs. Attackers can send integer-array prompts to the llama-server /completion endpoint with IDs outside 0 to n_vocab to read embedding memory out of bounds or crash the process. |
| Isar is an integration system for automated root filesystem generation. In versions 0.11 and newer, /etc/apt/trusted.gpg.d is created manually during bootstrap setup to be able to deploy local keys. By that, the directory is owned by the calling user (the one that executes Isar) instead of root. If the calling user's id is identical to one of an unprivileged user inside the image, this user is able to alter existing keys and deploy new ones, silently breaking the apt repo integrity protection. The issue is has no impact on those images that use an immutable rootfs, or if apt is never invoked. Changing only the keys does not trigger an exploit, it's just one step in a chain. An attacker would also have to manipulate a remote repo or intercept non-secure communication with it. This issue has been patched via commit 29e84ed. |
| libIEC61850 is an open-source implementation of IEC 61850 client and server protocols including MMS, GOOSE, Sampled Values, and R-Session. Prior to 1.6.2, alternateArrayAccess in src/mms/iso_mms/server/mms_read_service.c does not validate an alternate-access sub-array range when numberOfElements is greater than zero. An out-of-range MmsValue_getElement call returns NULL, and the sub-array branch passes that value to MmsValue_isDeletable, causing a NULL pointer dereference. A remote MMS Read request can therefore crash servers whose data models contain arrays, while the single-element error path handles the same invalid index safely. This issue is fixed in version 1.6.2. |
| A flaw was found in libsolv, a dependency-resolution library used by RPM-based package managers such as dnf and zypper to work with .solv repository cache files. When libsolv rewrites a .solv cache file, it reads directory-id values from the file's compressed filelist data without validating that they fall within the expected range. A corrupted or specially crafted .solv cache file (for example, one left in a torn state after an unclean system shutdown) can cause an out-of-bounds memory write when a tool such as dnf, yum, or zypper next processes it. Successful exploitation is expected to result in a crash of the affected tool (denial of service); it is not expected to allow arbitrary code execution because the out-of-bounds write always stores a fixed, non-attacker-controlled value. |
| `_gx_binres_pixelmap_table_load()` in the GUIX binary resource (theme) loader indexes the pixelmap table with a value read verbatim from the resource file and never bounds it against the table size. A crafted theme drives a write of up to roughly 256 KB past the end of the table.
The overflowed buffer is allocated by GUIX itself, through `_gx_system_memory_allocator`, rather than supplied by the caller, so the loader corrupts its own arena. The public API `gx_binres_theme_load()` takes no size parameter, so no amount of caller diligence prevents this.
Reproduces in the shipped default configuration; `GX_BINARY_RESOURCE_SUPPORT` is enabled by default. |
