| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| QAnything 2.0.0 contains an authentication bypass vulnerability in the /api/local_doc_qa/get_file_base64 and /api/local_doc_qa/get_doc endpoints that allows unauthenticated attackers to access any uploaded file or document. Attackers can enumerate file identifiers through unauthenticated endpoints and retrieve base64-encoded files or parsed document chunks without ownership verification to disclose cross-tenant knowledge base content. |
| Missing Authentication for Critical Function, Server-Side Request Forgery (SSRF), and Use of Hard-coded Credentials in ASUS Control Center allow an unauthorized user to obtain the encryption key via an HTTP request, causing a local service to enable SSH on port 2222. The attacker can then log in with the hardcode credentials to obtain a root shell, enabling direct reading, writing, and deletion of data on ASUS Control Center, as well as remote control of all servers, PCs, and workstations within the company.
Refer to the 'Security Update for ASUS Control Center' section on the ASUS Security Advisory for more information. |
| Joro is a web exploitation framework. Prior to version 1.1.1, Joro's default proxy mode exposes a local API on 127.0.0.1:9090 that performs no authentication and applies a wildcard CORS policy. Because plugin uploads use the CORS-safelisted multipart/form-data content type, cross-origin JavaScript on any page the operator visits can reach privileged endpoints - including uploading a native plugin and triggering a restart - directly through the operator's browser, with no preflight or credentials. Since plugins execute on load, this yields unauthenticated remote code execution as the operator's user from a single page visit. This issue has been patched in version 1.1.1. |
| A flaw was found in EAP's IIOP. The listener's NameService would accept bind operations without authentication, allowing an attacker to hijack JNDI lookups and binding them to a malicious ORB, achieving MITM or DoS on further invocations. |
| Vulnerability in the MySQL Connectors product of Oracle MySQL (component: Connector/J). Supported versions that are affected are 9.7.0-9.7.1. Difficult to exploit vulnerability allows low privileged attacker with network access via multiple protocols to compromise MySQL Connectors. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all MySQL Connectors accessible data as well as unauthorized access to critical data or complete access to all MySQL Connectors accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of MySQL Connectors. CVSS 3.1 Base Score 7.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:L). |
| Vulnerability in the MySQL Connectors product of Oracle MySQL (component: Connector/J). Supported versions that are affected are 9.7.0-9.7.1. Easily exploitable vulnerability allows low privileged attacker with network access via multiple protocols to compromise MySQL Connectors. While the vulnerability is in MySQL Connectors, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all MySQL Connectors accessible data. CVSS 3.1 Base Score 7.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:N/A:N). |
| Windows ML CLI is a command line tool for building portable, performant, and high-quality AI models for Windows ML. Prior to 0.4.0, the src/winml/modelkit/serve/cli_api.py component exposes WinML CLI commands through a localhost HTTP API without authentication and configures the allow_origins setting as a wildcard in both src/winml/modelkit/serve/cli_api.py and src/winml/modelkit/serve/app.py. A malicious website loaded by a user can send cross-origin requests to /v1/cli/build or /v1/cli/config and set the trust_remote_code parameter to true, which is converted to the --trust-remote-code command-line flag without validation. This reaches AutoConfig.from_pretrained with trust_remote_code=True in src/winml/modelkit/loader/_autoconfig.py and imports Python code from an attacker-controlled model repository, resulting in arbitrary code execution as the server user. This issue is fixed in version 0.4.0. |
| A security issue exists within ControlFLASH™, where the installer grants write permissions to the "Everyone" group on a product installation directory. This could allow arbitrary code execution, resulting in an attacker being given the ability to run any commands or code of the attacker's choice on a target machine at the logged-in user's permission level. |
| A vulnerability was determined in tsi-coop tsi-dpdp-cms up to 0.5.0. Affected by this issue is some unknown functionality of the file web.xml of the component Admin Console/DPO Compliance Console. Executing a manipulation can lead to missing authentication. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. Upgrading to version 0.5.1 can resolve this issue. It is suggested to upgrade the affected component. |
| A vulnerability has been found in Casdoor up to 4.0.0. This affects an unknown function of the file controllers/resource.go of the component upload-resource API. Such manipulation leads to missing authentication. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor deleted the GitHub issue for this vulnerability without any explanation. Afterwards the vendor was contacted early about this disclosure via email but did not respond in any way. |
| Phison PS3111-S11 controller firmware versions through SBFQT1.3 expose privileged vendor unique commands over the ATA interface with absent or defeatable authentication mechanisms. Attackers can bypass the weak CRC-16 based unlock handshake or exploit builds with no VUC lock to read and write controller memory and raw flash, persisting implants across power cycles. |
| SEPPmail Secure Email Gateway before 15.0.7 creates a fully privileged session before required multi-factor authentication enrollment is completed. An attacker with the password for an MFA-required but unenrolled account can access protected functionality without providing a second factor. |
| Vulnerabilities in an API endpoint of HPE Networking Fabric Composer could allow an unauthenticated remote attacker to conduct a denial of service attack. Successful exploitation could allow an attacker to make limited unauthorized modifications to the underlying operating system and disrupt the availability of the affected system, requiring manual intervention to restore functionality. |
| A vulnerability in the API of HPE Networking Fabric Composer could allow an unauthenticated remote attacker to obtain limited system information and to change the state of certain settings of a vulnerable system. Successful exploitation could allow an attacker to gain insight into internal services and workflows and to make unauthorized changes that may disrupt the normal operation of the affected service. |
| LiteLLM is a proxy server (AI Gateway) to call LLM APIs in OpenAI (or native) format. Prior to 1.84.0, LiteLLM's MCP Streamable HTTP endpoint allowed an unauthenticated attacker to use a fabricated Authorization header to trigger an OAuth2 passthrough fallback path that replaced failed LiteLLM key validation with an empty UserAPIKeyAuth() object, allowing requests to reach MCP tooling without a valid LiteLLM key. This issue is fixed in version 1.84.0. |
| A vulnerability was identified in tsi-coop tsi-dpdp-cms up to 0.5.0. This affects an unknown part of the file InterceptingFilter.java of the component Bootstrap Setup Endpoint. The manipulation leads to missing authentication. The attack can be initiated remotely. The exploit is publicly available and might be used. Upgrading to version 0.5.1 is able to mitigate this issue. Upgrading the affected component is recommended. |
| Keploy versions 3.1.0 through 3.6.25, fixed in 3.6.26, bind the agent control-plane HTTP server to all interfaces without authentication, exposing endpoints that stream TLS session keys and traffic data. Attackers can access the /agent/pcap/keylog endpoint to retrieve NSS keylog lines and decrypt recorded TLS traffic, or invoke /agent/stop and /agent/storemocks to manipulate recording sessions. |
| A vulnerability has been identified in the underlying operating system of HPE Networking Fabric Composer that could potentially allow an unauthenticated adjacent actor to circumvent existing authentication controls. Successful exploitation could allow an attacker to gain administrative access, modify system configurations, and access or manipulate sensitive data. |
| Seagull Software BarTender 2010, 2016, and 2019 contain an unauthenticated remote code execution vulnerability in the .NET Remoting service exposed on TCP port 7375 via BtSystem.Service.exe. The service registers an unauthenticated singleton endpoint — BarTenderSystem for BarTender 2016 <= R9, and DataServiceSingleton for BarTender 2019 <= R10 — configured with BinaryServerFormatterSinkProvider and TypeFilterLevel set to Full. An unauthenticated remote attacker can exploit .NET Remoting object unmarshalling to read or write arbitrary files on the server using the .NET WebClient class, or coerce NTLMv2 authentication by supplying a UNC path to an attacker-controlled server, enabling sensitive credential disclosure, remote code execution, or lateral movement depending on service account privileges and network environment. The service runs in the context of NT AUTHORITY\\SYSTEM. This vulnerability is corrected in BarTender 12.1. Users of affected releases should upgrade to BarTender 12.1 or later. |
| The Notification Bar for WordPress plugin through 1.1.8 exposes an unauthenticated CSV export script that discloses all stored subscriber emails. |
