| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/tcp-ao: fix use-after-free of current_key on reconnect to another peer
tcp_inbound_ao_hash() is called before bh_lock_sock_nested() is taken,
with only rcu_read_lock() held. On the fast path for established
sockets, if the rnext_keyid sent by the peer differs from
current_key->sndid, the key the peer asked for is looked up and stored
in current_key. The lookup is inside the RCU read side, but current_key
outlives it.
When the socket is disconnected and connect() is called again for
another peer, tcp_ao_connect_init() unlinks every key that does not
match the new peer and frees it with call_rcu(). If current_key points
at such a key, it is cleared to NULL.
The fast path reads sk_state only once on entry, so a softirq that got
into it while the socket was still established can update current_key
after that loop has already run. The update is inside the RCU read side,
so it comes before the call_rcu() callback, and once the callback frees
the key, current_key is left pointing at freed memory.
The next transmission picks that pointer up in tcp_get_current_key().
tcp_ao_transmit_skb() then reads the traffic key from the freed object,
which is the use-after-free.
Wait for one grace period before unlinking, and only if a key is going
to be removed. By the time tcp_connect() runs the socket is already in
TCP_SYN_SENT, and TCP_AO_ESTABLISHED does not contain TCPF_SYN_SENT, so
a softirq entering after the wait cannot reach the fast path, and the
ones already in it have finished. The existing NULL handling in the loop
is then enough. |
| A flaw was found in libsoup. A malicious HTTP/2 server or a Man-in-the-Middle (MITM) attacker can exploit a heap use-after-free vulnerability in the HTTP/2 client implementation. This occurs when a GNOME application uploads a file using HTTP/2, and the server sends a GOAWAY frame while the file body is being read asynchronously. This can lead to memory corruption, potentially resulting in information disclosure or arbitrary code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix responder UAF on IB_QP_MAX_DEST_RD_ATOMIC modify_qp
rxe_qp_from_attr() handles IB_QP_MAX_DEST_RD_ATOMIC outside the
IB_QP_STATE path, so it holds no state_lock and runs while the responder
task rxe_receiver() (recv_task on rxe_wq) is live. A modify_qp() setting
only that attribute calls free_rd_atomic_resources() then
alloc_rd_atomic_resources(), swapping qp->resp.resources[] while
rxe_prepare_res()/find_resource() walk it; free_rd_atomic_resources()
also leaves the cached pointer qp->resp.res dangling. A local
unprivileged user can race the free/realloc into a use-after-free in
rxe_receiver() (local DoS).
Drain recv_task around the swap with rxe_disable_task()/rxe_enable_task(),
as rxe_qp_reset() already does when tearing this array down, re-enabling
only after alloc_rd_atomic_resources() succeeds so the responder never
resumes against a NULL qp->resp.resources on the ENOMEM path. Also clear
qp->resp.res in free_rd_atomic_resources(), like the rxe_resp.c
completion paths.
Reproduced under KASAN; the slab-use-after-free in rxe_receiver() is gone. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: c67x00: fix use-after-free in c67x00_add_iso_urb()
When TD creation fails for the last packet of an isochronous URB,
c67x00_add_iso_urb() gives the URB back before updating the endpoint
scheduling state.
c67x00_giveback_urb() frees the URB private data, and the completion
callback may release the final URB reference. The following accesses to
urbp->ep_data, urb->interval, and urbp->cnt can therefore use freed
memory.
Update next_frame and cnt before giving back the failed final packet,
making the giveback the last operation that uses the URB and its private
data. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: core: Add lock to usb_wakeup_notification()
Add a spin lock to usb_wakeup notification to prevent a race condition
with dereferencing freed memory. This could be hit by the xHCI driver as
it calls this function from an IRQ and could race with the
hub_disconnect() function, which properly grabs this lock to protect the
state of the device. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: sun8i-ss - Remove crypto_rng interface
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the
sun8i-ss support which is one of the only remaining ones.
As usual for crypto_rng, this driver was also buggy: its ->generate()
function had a use-after-free vulnerability due to using
wait_for_completion_interruptible_timeout() without handling shutting
down the DMA operation if a signal is sent. Also, it had a buffer
overread bug in the line 'memcpy(ctx->seed, d + dlen, ctx->slen);'.
There's no point in fixing these bugs separately only to remove the code
anyway, so this commit is marked with Fixes and Cc stable. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: sun8i-ce - Remove crypto_rng interface
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the
sun8i-ce support which is one of the only remaining ones.
Note that the sun8i-ce support for hwrng remains in place. That is the
interface that actually matters.
As usual for crypto_rng, this driver was also buggy: its ->generate()
function had a use-after-free vulnerability due to using
wait_for_completion_interruptible_timeout() without handling shutting
down the DMA operation if a signal is sent. There's no point in fixing
this separately only to remove the code anyway, so this commit is marked
with Fixes and Cc stable. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: keep the last remote linked during FDB flush
A non-nexthop FDB entry is expected to have at least one remote while it
remains reachable through the FDB hash table. A filtered bulk flush
violates this invariant when every remote matches: It unlinks the last
remote in vxlan_fdb_dst_destroy() and only afterwards tells vxlan_flush()
to destroy the parent FDB entry.
An RCU reader can find the parent during this interval.
first_remote_rcu() then applies list_entry_rcu() to the empty list head,
producing an invalid remote pointer that the receive learning path can
read from and write to.
When a matching remote is the sole remaining remote, leave it linked and
ask the caller to destroy the entire FDB entry. vxlan_fdb_destroy() keeps
the remote attached while sending the deletion notification and removing
the parent from the lookup structures. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix AO info use-after-free in tcp_ao_connect_init()
tcp_v4_connect() adds a SYN-SENT socket to the ehash before calling
tcp_connect(). If TCP-AO is configured, tcp_connect() first verifies that
a key matches the peer and the bound device's current L3 master.
tcp_ao_connect_init() later resolves the L3 master again and removes keys
which do not match it.
The socket lock does not stabilize the bound device's VRF membership.
Detaching the device from its VRF between the initial validation and the
L3-master calculation in tcp_ao_connect_init() can therefore make the
validation succeed while initialization observes the default L3 domain and
removes the only key. The subsequent AO lookup then fails, so the no-key
path clears tp->ao_info and frees it directly.
The receive path can find the socket in the ehash and load tp->ao_info
under RCU before acquiring the socket lock. A reader which loaded the old
pointer can thus continue into tcp_inbound_ao_hash() after the direct free.
The issue was found during a static audit of TCP-AO object lifetime. An
unprivileged reproducer in self-created user and network namespaces raced
connect() with detaching a veth from its VRF while sending TCP-AO segments.
It triggered the same KASAN report on two fresh boots:
BUG: KASAN: slab-use-after-free in tcp_inbound_ao_hash+0x585/0x19f0
Write of size 8 at addr ffff88800bf88128 by task tcp_ao_vrf_race/232
Call Trace:
tcp_inbound_ao_hash+0x585/0x19f0
tcp_inbound_hash+0x677/0xa80
tcp_v4_rcv+0x1c3e/0x3ab0
Allocated by task 235:
tcp_ao_alloc_info+0x43/0xf0
tcp_ao_add_cmd+0xdf7/0x13b0
do_tcp_setsockopt+0x168c/0x2640
Freed by task 235:
kfree+0x1b8/0x550
tcp_connect+0x252/0x4f00
tcp_v4_connect+0x1114/0x1720
The bad address is 40 bytes inside the freed 128-byte object, matching the
tcp_ao_info counters.key_not_found field. The two runs used 1000 attempts
each, reached the no-key path 366 and 411 times, and produced one and two
KASAN reports respectively. With this change, the same reproducer reached
the no-key path 366 times in 1000 attempts without a KASAN report or oops.
Use tcp_ao_destroy_sock() for the no-key path. It unpublishes the AO info,
updates the socket memory and static-key accounting, and defers the free
until after an RCU grace period.
Also drop the WARN_ON_ONCE() and its stale comment. The VRF detach race
makes the no-key state reachable during normal operation, so it is a
handled condition rather than an impossible assertion. On panic_on_warn
kernels the WARN would turn this handled race into a kernel panic. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_tcm: keep port count until LUN teardown completes
tcm_usbg_drop_nexus() permits session removal once tpg_port_count
reaches zero. However, usbg_port_unlink() currently decrements that
count from the fabric_pre_unlink() callback, before core_dev_del_lun()
waits for active se_lun references to drain.
If removal of the last LUN races a nexus removal, the latter can observe
a zero port count and call target_remove_session(). This frees
sess_cmd_map while an in-flight struct usbg_cmd, including its work item,
can still be accessed.
Overlapping the last-LUN unlink with nexus removal reproduces this
lifetime violation as a DEBUG_OBJECTS "free active" warning for
usbg_cmd_work, followed by a target-core BUG/Oops.
The generic target-core unlink path has no callback after
core_dev_del_lun() completes. Add an optional fabric_post_unlink()
callback and use it for the f_tcm port count. The count now remains
nonzero until core_dev_del_lun() has finished draining active LUN
references, preventing nexus removal from freeing the session during
command completion. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Fix CMD_SYNC use-after-free on teardown
arm_smmu_impl_remove() is registered as a devres action in
arm_smmu_impl_probe(), before arm_smmu_init_queues() allocates
smmu->cmdq.q.base. On a devres unwind, whether a failed probe or an
unbind, the queue is freed first and arm_smmu_impl_remove() then runs
tegra241_cmdqv_remove_vintf(), whose VINTF deinit issues a CMD_SYNC on
the freed memory.
Observed during testing with a QEMU hack that makes the VCMDQ fail to
enable, so the impl reset fails and probe aborts into the devres unwind:
platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: failed to enable, STATUS=0x00000000
platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: GERRORN=0x0, GERROR=0x4, CONS=0x0
platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: uncleared error detected, resetting
arm-smmu-v3 arm-smmu-v3.0.auto: failed to reset impl
arm-smmu-v3 arm-smmu-v3.0.auto: probe with driver arm-smmu-v3 failed with error -110
Unable to handle kernel paging request at virtual address ffff8000891e0098
...
Internal error: Oops: 0000000096000047 [#1] SMP
...
Call trace:
arm_smmu_cmdq_issue_cmdlist+0x320/0x6fc (P)
tegra241_vcmdq_hw_deinit+0x98/0x168
tegra241_vintf_hw_deinit+0x5c/0x1b0
tegra241_cmdqv_remove_vintf+0x34/0xec
tegra241_cmdqv_remove+0x40/0x9c
arm_smmu_impl_remove+0x20/0x30
devm_action_release+0x14/0x20
devres_release_all+0xa8/0x110
device_unbind_cleanup+0x18/0x84
really_probe+0x1f0/0x29c
Drop the VINTF deinit from tegra241_cmdqv_remove_vintf() so the unwind no
longer touches the freed queue. Quiesce the VINTFs earlier instead. Add a
device_disable() impl op and run it from arm_smmu_disable_action() while
the CMDQ is still up. That handles a live unbind. A failed reset is already
handled because tegra241_vintf_hw_init() deinits the VINTF on its own error
path. tegra241_cmdqv_remove_vintf() is also used by the iommufd viommu
destroy path, so quiesce there too. |
| When initializing an RSA public key from DER or PEM bytes throws an error, the EVP_PKEY* is double-freed: first in the catch block, then in the deinit. This can lead to a crash on future memory allocations. This double-free manifests when BoringSSL cannot decode the public key from the bytes provided. This vulnerability is addressed in swift-crypto version 4.5.1. |
| @fastify/static before version 10.1.3 contains an incomplete fix for a previous route guard bypass. The static file handler rejected only parent directory segments, but it did not canonicalize dot segments, duplicate slashes, encoded dots, or backslashes before route matching and before delegating to the send layer. As a result, an unauthenticated attacker could request a file protected by a route based guard using a non canonical path form that misses the guarded route yet resolves back onto the protected file, disclosing its contents. Applications that protect a subtree of the static root with a route based guard are affected, while applications relying on the allowedPath option are not. This is fixed in @fastify/static 10.1.3, which canonicalizes the pathname, including rejecting backslashes, on the path used for routing and serving. |
| A maliciously crafted PDF file, when parsed through Autodesk Revit, can force a Use-After-Free vulnerability. A malicious actor can leverage this vulnerability to cause a crash, disclose sensitive data, or execute arbitrary code in the context of the current process. |
| In the Linux kernel, the following vulnerability has been resolved:
futex/pi: Reject cross-mm private futex owners
A private futex key borrows the waiter's mm without taking an mm_users
reference. Nevertheless, attach_to_pi_owner() currently accepts an owner
from a different address space and copies the private key into the owner's
PI state.
When that owner exits, exit_pi_state_list() uses the saved key to find the
hash bucket and acquires a reference to the waiter's private hash. If the
last user of the waiter's mm exits concurrently, futex_hash_free() frees
the hash while the owner still uses its bucket and reference.
Prevent this by validating in attach_to_pi_owner() that, for private
futexes, the owner mm and waiter mm are the same. Perform the check with
the owner's pi_lock held and after validating owner::futex::state to
serialize against a concurrent PI-state exit cleanup.
[ tglx: Amended comment ] |
| In the Linux kernel, the following vulnerability has been resolved:
HID: magicmouse: do not keep a stale msc->input if no input is claimed
magicmouse_input_mapping() caches the first hid_input's input_dev in
msc->input while the report descriptor is parsed, and the rest of the
driver treats a non-NULL msc->input as proof that an input device was
registered.
That does not hold on the hid-input error path. If hidinput_connect()
fails -- for instance because input_register_device() returns an error --
it unwinds through hidinput_disconnect(), which frees every input_dev it
created, including the one cached in msc->input.
The failure does not abort the probe. hid_connect() only skips the claim:
if ((connect_mask & HID_CONNECT_HIDINPUT) && !hidinput_connect(hdev,
connect_mask & HID_CONNECT_HIDINPUT_FORCE))
hdev->claimed |= HID_CLAIMED_INPUT;
and the "device has no listeners" bailout below it does not fire for this
driver, which sets ->raw_event; on the USB Magic Mouse 2 / Magic Trackpad
2 paths hidraw and hiddev are claimed as well. hid_hw_start() therefore
returns 0 and magicmouse_probe() continues with msc->input pointing at
freed memory. Being non-NULL, it passes the "input not registered" check
in probe and the NULL checks in ->raw_event and ->event, so the next
input report dereferences freed memory.
Clear msc->input when the HID core did not claim an input device, so the
existing NULL checks cover this case as well. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-fc: fix invalid free in LS IOD error path
nvmet_fc_alloc_ls_iodlist() advances iod while initializing the LS IOD
array. If an rqstbuf allocation or response buffer DMA mapping fails,
the unwind loop decrements iod past the start of the array. The final
kfree(iod) therefore frees an address before the allocated object.
This can be reproduced with nvme-fcloop and failslab by setting
fail-nth to 6 before creating a target port. KASAN reports:
BUG: KASAN: invalid-free in nvmet_fc_register_targetport
Free of addr ffff88816cf8ff48 by task nvmet_fail_nth/9552
Free the original allocation base stored in tgtport->iod instead. With
this fix applied, the same sysfs write with fail-nth=6 returns -ENOMEM
without any KASAN report. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix use-after-free in ip6_finish_output2()
ip6_finish_output2() caches a pointer to the IPv6 destination
address (daddr) before invoking lwtunnel_xmit(). The LWT-BPF
transmit path or other encapsulation operations within
lwtunnel_xmit() can reallocate the skb head, freeing the memory
that daddr points to. When lwtunnel_xmit() returns
LWTUNNEL_XMIT_CONTINUE, the function continues to use the stale
daddr pointer to compute the nexthop and to look up or create the
neighbour entry. This results in a use-after-free read, which can
leak sensitive kernel data, pollute the neighbour table with
arbitrary values, misdirect traffic, or crash the system.
Fix this by re-fetching the IPv6 header and the destination
address pointer after lwtunnel_xmit() returns
LWTUNNEL_XMIT_CONTINUE, ensuring that the subsequent nexthop
computation and neighbour lookup operate on valid memory. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: uclogic: fix use-after-free of inrange_timer on remove
uclogic_remove() cancels the pen in-range timer and then stops the
device:
timer_delete_sync(&drvdata->inrange_timer);
hid_hw_stop(hdev);
timer_delete_sync() only guarantees the timer is idle at that instant.
uclogic_raw_event_pen() keeps delivering pen reports until hid_hw_stop()
stops the transport several lines later, and every report with
pen->inrange == UCLOGIC_PARAMS_PEN_INRANGE_NONE re-arms the timer:
mod_timer(&drvdata->inrange_timer, jiffies + msecs_to_jiffies(100));
A report landing between the timer_delete_sync() call and the transport
teardown in hid_hw_stop() re-arms inrange_timer after it was cancelled.
uclogic_remove() then returns and the devm drvdata is freed, while
hid_hw_stop() has already freed the input device drvdata->pen_input
points at, so when the timer fires ~100 ms later
uclogic_inrange_timeout() dereferences freed memory -- a use-after-free
in timer-softirq context.
Swapping the two calls is not a fix: stopping the device first frees
drvdata->pen_input via hidinput_disconnect() while the timer may still
be pending, so a timer already armed before removal fires on the freed
input device in the window before timer_delete_sync() runs.
Use timer_shutdown_sync() before hid_hw_stop() instead. It cancels the
timer, waits for a running callback while pen_input is still valid, and
prevents any further re-arming -- a later mod_timer() from an in-flight
report is silently ignored -- so the timer is provably dead before
hid_hw_stop() frees the inputs. This is the ordering the timer core
documents for this "timer re-armed from another path" teardown case. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: sensor: custom: Fix use-after-free in enable_sensor
enable_sensor_store() can call set_power_report_state(), which
dereferences sensor_inst->power_state and sensor_inst->report_state.
These pointers refer to entries in sensor_inst->fields.
Create the field attributes before exposing the enable_sensor sysfs
attribute, so enable_sensor cannot be accessed before the state it
depends on has been initialized.
On remove, delete enable_sensor before freeing the field attributes,
so a concurrent sysfs write cannot dereference freed memory through
power_state or report_state. |
