| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Coroot's unauthenticated MCP OAuth dynamic client registration endpoint accepts any syntactically valid redirect URI without validation, allowing attackers to register clients pointing to attacker-controlled hosts. Attackers can send authorization URLs to signed-in users, capture their authorization codes upon consent approval, and exchange them for access tokens to hijack MCP sessions. |
| Pocket ID is an OIDC provider that allows users to authenticate with their passkeys to services. From 2.6.0 until 2.9.0, frontend/src/routes/authorize/+page.ts reads the redirect_uri query parameter and frontend/src/routes/authorize/+page.svelte uses the raw callbackURL in redirectWithError when prompt=none cannot complete silent authorization. The client-side path only blocks javascript and data schemes and does not invoke the backend callback allow-list validation, so an unauthenticated attacker who knows a valid client_id can redirect a victim browser to an arbitrary HTTP or HTTPS origin for phishing or OIDC error and state smuggling. This issue is fixed in version 2.9.0. |
| Twenty through 2.35.0 contains an open redirect vulnerability in the OAuthPropagatorController.propagateOAuthCallback endpoint that treats the state query parameter as a redirect URL. Attackers can craft malicious requests to redirect users to arbitrary hosts while forwarding OAuth authorization codes, bypassing domain validation when IS_MULTIWORKSPACE_ENABLED is disabled. |
| Punk::OAuth2 versions before 0.03 for Perl allow an attacker-chosen off-site redirect after login because same_origin_path accepts a backslash or tab in the return parameter.
oauth2_login reads the return parameter from the initiation request, runs same_origin_path over it, and stores the survivor in the session flow record as the post-login redirect target. That check rejects a value that does not begin with a slash, one with a slash as its second byte, and one containing CR or LF. A backslash and a tab pass. The URL Standard treats a backslash as equivalent to a slash for special schemes, so `/\evil.example` parses with the authority `evil.example`. It also strips ASCII tab before parsing, so a tab between two leading slashes leaves `//evil.example`.
A crafted link to the application's own login route lands the victim on the attacker's site after a genuine authentication. The redirect carries no authorization code or access token. |
| Kimai before 2.53.0 contains an open redirect vulnerability in the SAML authentication success handler that accepts unvalidated RelayState POST parameters as redirect destinations. Attackers with IdP access can supply malicious RelayState values to redirect authenticated users to attacker-controlled URLs for credential theft or phishing attacks. |
| UrlHandlerFilter can be vulnerable to an open redirect when configured with very broadly matching patterns. The issue applies to the filter variants in both Spring MVC and Spring WebFlux.
Spring Framework 7.0.0 - 7.0.8
Spring Framework 6.2.0 - 6.2.19 |
| Jenkins 2.567 and earlier, LTS 2.555.2 and earlier improperly determines that a redirect URL after login is legitimately pointing to Jenkins when it contains tab or newline characters between `//`, allowing attackers to perform phishing attacks. |
| OpenMetadata accepts a caller-supplied post-authentication redirect target and appends the issued token to it. SamlLoginServlet reads the callback request parameter and stores it in the HTTP session without comparing it against any configured or registered destination, and the assertion consumer servlet later formats that stored value into a URL carrying the freshly issued JWT together with the account's email and name before sending the redirect. The OIDC and OAuth2 handler follows the same pattern with its own redirect parameter and the issued identity token. A request naming a destination the attacker controls therefore causes the server to deliver a valid token for whoever completes the login to that destination. Because the token authenticates API calls as that account, a user who follows such a link and authenticates hands over control of their account. Version 2.0.0 removes the caller-supplied callback parameter; no 1.x release validates it. |
| Ech0 through 4.5.6 contains an OAuth redirect URI validation vulnerability in parseAndValidateClientRedirect (internal/service/auth/auth.go) that compares only the scheme and host of the client-supplied redirect_uri against the admin-configured allowlist, ignoring path, query, and fragment components. The redirect_uri is embedded into the signed state JWT at login time without validation. An attacker can craft a redirect_uri whose host matches an allowed origin but whose path is attacker-influenced; after the OAuth exchange the victim is redirected to that path with a one-time exchange code in the query string. If the code leaks (e.g., via Referer, analytics, or an open redirect on that host), the attacker can trade it at the public POST /api/auth/exchange endpoint for the victim's access and refresh tokens. Fixed in 4.7.3. |
| The unstructured library provides open-source components for ingesting and pre-processing images and text documents, such as PDFs, HTML, Word docs, and many more. From 0.4.7 until 0.24.0, the url argument of partition, partition_html, and partition_md is fetched without host validation in unstructured/partition/auto.py, unstructured/partition/html/partition.py, and unstructured/partition/md.py. An attacker who controls that URL can make a server-side ingestion service request loopback addresses, internal HTTP services, or cloud metadata endpoints through direct targets, redirects, or DNS rebinding. The response body is returned as Element text, allowing internal response disclosure, and side-effecting GET endpoints may also be triggered. This issue is fixed in version 0.24.0. |
| WebOb provides objects for HTTP requests and responses. Prior to 1.8.11, Response._make_location_absolute() in src/webob/response.py checks a Location value for a URI scheme or leading double slash before urllib.parse.urljoin() strips leading C0 control characters and spaces. An attacker-controlled value such as a space followed by a protocol-relative or absolute URL can therefore bypass SCHEME_RE and startswith("//") checks and be normalized to an off-host redirect. Request.relative_url() and webob.exc._HTTPMove subclasses, including HTTPFound, are also affected because they use the same unsafe URL joining behavior or bypass the earlier normalization path. An unauthenticated attacker who can influence an application's redirect target can send users to an attacker-controlled host for phishing or OAuth and SSO token theft, but exploitation requires the user to follow the redirect. This issue is fixed in version 1.8.11. |
| Miniflux 2 is an open source feed reader. Prior to 2.3.1, IsRelativePath in internal/urllib/url.go accepts redirect targets containing backslashes because Go URL parsing treats them as path characters. Browser backslash normalization converts them to forward slashes. An unauthenticated attacker can provide such a redirect_url value to the login flow, bypass the relative-path and host checks, and redirect a victim to an attacker-controlled external site. This issue is fixed in version 2.3.1. |
| A vulnerability has been found in CTFd up to 3.8.4. The affected element is the function _is_safe_url of the file CTFd/utils/validators/__init__.py. Such manipulation of the argument Next leads to open redirect. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The name of the patch is 5d8515842fd1ab2c3a9f2dde9ffca907aa334ea9. Upgrading the affected component is recommended. |
| Vulnerability in the Oracle Hyperion Infrastructure Technology product of Oracle Hyperion (component: Installation and Configuration). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Hyperion Infrastructure Technology. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Oracle Hyperion Infrastructure Technology, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle Hyperion Infrastructure Technology. CVSS 3.1 Base Score 9.6 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:H/A:H). |
| Etherpad is a real-time collaborative editor. From 2.1.0 until 3.1.0, Etherpad uses the attacker-controlled x-proxy-path request header in src/node/hooks/express/admin.ts when substituting paths into HTML, JavaScript, and CSS under /admin without sanitization, Vary: x-proxy-path, or Cache-Control: private, no-store. A shared proxy or CDN can cache the resulting response and serve attacker-injected script to an administrator. In src/node/hooks/express/specialpages.ts, version 3.0.0 also accepts a protocol-relative x-proxy-path value when constructing the /p/:pad/timeslider redirect, allowing redirection to an attacker-controlled host. The issues are exploitable when the deployment permits client-supplied x-proxy-path headers to reach Etherpad. This issue is fixed in version 3.1.0. |
| libgit2 is a portable C implementation of the Git core methods provided as a linkable library with a solid API, allowing to build Git functionality into your application. Prior to 1.8.6 and 1.9.5, the built-in HTTP transport in src/libgit2/transports/http.c follows an offsite initial redirect, and handle_remote_auth and handle_auth pass transport->owner->url instead of transport->server.url to the credential callback when the redirected host returns 401 Unauthorized. A callback that scopes credentials to the original trusted URL can therefore return GIT_CREDENTIAL_USERPASS_PLAINTEXT credentials that libgit2 stores in transport->server.cred and sends as an Authorization header to the redirected host. An attacker who controls a trusted Git host or an open redirect on that host can disclose HTTP Basic credentials, personal access tokens, or equivalent credentials. This issue is fixed in versions 1.8.6 and 1.9.5. |
| Joomla Extension - j2commerce.com - Open redirect in cart controller in J2Store 1.0.0-3.3.20, 4.0.0-4.0.20, 4.1.0-4.1.5 - Four task handlers accepted a base64-encoded URL from user input and redirected to it without validating the destination host, enabling phishing using the shop's trusted domain. No authentication required. |
| Joomla Extension - yootheme.com - Open redirect in CommentController::twitterAuthenticate() in Zoo < 4.1.64 - The referer request parameter is passed straight to setRedirect() with no validation. |
| Joomla Extension - yootheme.com - Reflected XSS and open redirect via the submission redirect parameter in Zoo < 4.1.66 |
| SecureDrop Client is a desktop app for journalists to securely communicate with sources and handle submissions on the SecureDrop Workstation. Prior to version 1.3.1, a malicious SecureDrop Server could bypass securedrop-proxy's origin limitation by responding with cross-origin redirects. SecureDrop Server itself has multiple layers of built-in hardening, and is a dedicated physical machine exposed on the internet only via Tor hidden services for the Source and Journalist interfaces, and optionally via remote SSH access over another Tor hidden service. A newsroom's SecureDrop Workstation communicates only with its own dedicated SecureDrop Server. Version 1.3.1 fixes the issue. |
