| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: saa7134: Fix a possible memory leak in saa7134_video_init1
In saa7134_video_init1(), the return value of the first
saa7134_pgtable_alloc() is not checked. If it fails, the function
continues as if successful, leaving the driver with an invalid page
table. Additionally, if vb2_queue_init() for the VBI queue fails after
the video queue page table has been allocated, the allocated memory is
not freed before returning. The second saa7134_pgtable_alloc() also
lacks a return value check. Errors occur during device probing before
the device is fully registered, the normal cleanup path in
saa7134_finidev() is not executed, leading to memory leaks and
potential use of uninitialized DMA resources.
Check the return value of both saa7134_pgtable_alloc() calls and
propagate errors. On failure of any later step, free allocated page
tables to avoid memory leaks. Ensure control handlers are also
released on error to prevent further resource leakage.
Found by code review. |
| In the Linux kernel, the following vulnerability has been resolved:
media: stm32: dcmi: unregister notifier on probe failure
dcmi_graph_init() registers the async notifier before dcmi_probe() toggles
the reset line. If reset_control_assert() or reset_control_deassert()
fails afterwards, probe returns through err_cleanup and the driver core
will not call dcmi_remove().
Unregister the notifier before cleaning it up on that error path,
matching the successful remove path and the V4L2 async notifier lifetime
rules.
[hverkuil: added Fixes tag] |
| In the Linux kernel, the following vulnerability has been resolved:
media: sun4i-csi: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
sun4i_csi_start_streaming() returned -EINVAL when no matching CSI
format could be found, before any setup (scratch buffer allocation,
pipeline start) had been performed. The remaining error paths already
converge on the err_clear_dma_queue label, which calls
return_all_buffers(..., VB2_BUF_STATE_QUEUED) under csi->qlock. Jump
to that label directly: the intermediate err_disable_device /
err_disable_pipeline / err_free_scratch_buffer labels are skipped,
which is correct because nothing they would undo has happened yet.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure"). |
| In the Linux kernel, the following vulnerability has been resolved:
media: ti: vpe: unwind v4l2 device registration on probe error
If the vpe_top resource is missing, vpe_probe() returns -ENODEV after
v4l2_device_register() has succeeded. Probe failures do not call the
driver's remove callback, so the v4l2 device remains registered on that
error path.
Route that failure through the existing v4l2_device_unregister() unwind
label, matching the other errors after v4l2_device_register(). |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: stratix10-svc: fix memory leaks and list corruption bugs
Fix a memory leak when gen_pool_alloc() fails by freeing pmem on the error
path. Switch pmem allocation from devm_kzalloc() to kzalloc() with
explicit kfree() in the free path to match its list-managed lifetime.
Remove the erroneous list_del(&svc_data_mem) which corrupted the list head
on failed lookups. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_elf_fdpic: only honour the first PT_INTERP
The program header scan handles PT_INTERP from a switch nested in the
scan loop, so its break leaves the switch and not the loop. A binary
carrying more than one PT_INTERP runs the case again and overwrites both
interpreter_name and interpreter. The previous name allocation leaks and
so does the previous interpreter reference, along with the write denial
open_exec() took on it. The denial is never released, so the file stays
unwritable for as long as the system runs.
An unprivileged caller reaches this with a crafted binary and repeats it
at will. binfmt_elf stops at the first PT_INTERP. Do the same here.
The flaw dates back to the driver's introduction in the pre-git history
tree introduced in v2.6.11 by 91808d6ebe39 ("[PATCH] FRV: Add FDPIC ELF
binary format driver"). |
| In the Linux kernel, the following vulnerability has been resolved:
fscrypt: Add missing superblock check in find_or_insert_direct_key()
The legacy 'fscrypt_direct_keys' table caches master keys that are used
by v1 encryption policies that have FSCRYPT_POLICY_FLAG_DIRECT_KEY.
It's just a global table for all filesystems (since the keys can be
provided by the legacy process-subscribed keyrings mechanism, which
makes it difficult to reuse super_block::s_master_keys).
The entries in it ('struct fscrypt_direct_key') do contain a super_block
pointer, though, for passing to fscrypt_destroy_inline_crypt_key() when
the last inode that references the key is evicted.
However, when finding the fscrypt_direct_key for an inode, we weren't
actually comparing the super_block pointer. As a result, inodes with
different super_blocks could point to the same fscrypt_direct_key. That
could extend the lifetime of a fscrypt_direct_key beyond the
super_block it points to, causing a use-after-free later.
Fix this by creating distinct fscrypt_direct_key structs for distinct
super_block structs.
Note that this problem doesn't exist in the v2 policy equivalent
("per-mode keys"), since the data structures there are per super_block. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hip04: fix RX buffer leak on build_skb failure
When build_skb() fails in hip04_rx_poll(), the driver jumps to the
refill path without releasing the current RX buffer and its DMA mapping.
Installing a replacement buffer then overwrites the slot references and
leaks both resources.
Keep the current slot intact and return budget so NAPI retries the same
buffer. Also free a newly allocated RX fragment when dma_map_single()
fails.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: ns: Limit the maximum server registration per node
Current code does no bound checking on the number of servers added per
node. A malicious client can flood NEW_SERVER messages and exhaust memory.
Fix this issue by limiting the maximum number of server registrations to
256 per node. If the NEW_SERVER message is received for an old port, then
don't restrict it as it will get replaced. While at it, also rate limit
the error messages in the failure path of qrtr_ns_worker().
Note that the limit of 256 is chosen based on the current platform
requirements. If requirement changes in the future, this limit can be
increased. |
| A security vulnerability has been detected in Edimax EW-7478APC 1.04. This impacts the function formWlbasic of the file /goform/formWlbasic. Such manipulation of the argument rootAPmac leads to command injection. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.5 before 19.0.6, 19.1 before 19.1.4, and 19.2 before 19.2.2 that under certain conditions could have allowed an unauthenticated user to cause a denial of service due to improper input validation. |
| A flaw has been found in kylecui NetForensicMCP 2.1.0. Impacted is the function execAsync of the file index.js. Executing a manipulation of the argument interface/protocol can lead to command injection. The attack may be launched remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A flaw in Node.js HTTP request handling causes an uncaught `TypeError` when a request is received with a header named `__proto__` and the application accesses `req.headersDistinct`.
When this occurs, `dest["__proto__"]` resolves to `Object.prototype` rather than `undefined`, causing `.push()` to be called on a non-array. This exception is thrown synchronously inside a property getter and cannot be intercepted by `error` event listeners, meaning it cannot be handled without wrapping every `req.headersDistinct` access in a `try/catch`.
* This vulnerability affects all Node.js HTTP servers on **20.x, 22.x, 24.x, and v25.x** |
| A memory leak occurs in Node.js HTTP/2 servers when a client sends WINDOW_UPDATE frames on stream 0 (connection-level) that cause the flow control window to exceed the maximum value of 2³¹-1. The server correctly sends a GOAWAY frame, but the Http2Session object is never cleaned up.
This vulnerability affects HTTP2 users on Node.js 20, 22, 24 and 25. |
| NLnet Labs Unbound up to and including version 1.25.0 is vulnerable to a degradation of service attack related to parsing long lists of incoming EDNS options. An adversary sending queries with too many EDNS options can hold Unbound threads hostage while they are parsing and creating internal data structures for the options. Coordinated attacks can result in degradation and/or denial of service. Unbound 1.25.1 contains a patch with a fix to limit acceptable incoming EDNS options (100). |
| The undici WebSocket client is vulnerable to a denial-of-service attack via unbounded memory consumption during permessage-deflate decompression. When a WebSocket connection negotiates the permessage-deflate extension, the client decompresses incoming compressed frames without enforcing any limit on the decompressed data size. A malicious WebSocket server can send a small compressed frame (a "decompression bomb") that expands to an extremely large size in memory, causing the Node.js process to exhaust available memory and crash or become unresponsive.
The vulnerability exists in the PerMessageDeflate.decompress() method, which accumulates all decompressed chunks in memory and concatenates them into a single Buffer without checking whether the total size exceeds a safe threshold. |
| A flaw was found in Undertow where malformed client requests can trigger server-side stream resets without triggering abuse counters. This issue, referred to as the "MadeYouReset" attack, allows malicious clients to induce excessive server workload by repeatedly causing server-side stream aborts. While not a protocol bug, this highlights a common implementation weakness that can be exploited to cause a denial of service (DoS). |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: i740fb: fix potential memory leak in i740fb_probe()
In i740fb_probe(), the memory allocated in fb_videomode_to_modelist()
for modelist is not freed in the error paths. Fix that by calling
fb_destroy_modelist(). |
| ZEBRA is a Zcash node written entirely in Rust. Prior to 4.5.0, one unauthenticated P2P peer can monopolize all 25 MAX_INBOUND_CONCURRENCY slots in Zebra's inbound mempool download and verification pipeline. In zebrad/src/components/mempool/downloads.rs, the bounded queue was shared globally without per-peer accounting, while peer identity was not carried through Gossip and FullQueue responses were mapped to Response::Nil instead of reaching overload disconnection handling. An attacker can advertise fake transaction identifiers and remain silent so each task holds a slot until TRANSACTION_DOWNLOAD_TIMEOUT, then periodically refill the queue as slots expire. While saturated, honest peer transactions and local sendrawtransaction requests are rejected with MempoolError::FullQueue, although block validation and synchronization continue. This issue is fixed in version 4.5.0. |
| This CVE record was assigned not following CNA/CVE rules and is not considered a valid vulnerability by the Pallets Click project. The original CVE record description is preserved below:
Pallets Click, versions 8.3.2 and below, contain a command injection vulnerability in the click.edit() function, allowing attackers to pass arbitrary OS commands from an unprivileged account. |
