| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been discovered in qtdemux_parse_container function within qtdemux.c. In the parent function qtdemux_parse_node, the value of length is not well checked. So, if length is big enough, it causes the pointer end to point beyond the boundaries of buffer. Subsequently, in the qtdemux_parse_container function, the while loop can trigger an OOB-read, accessing memory beyond the bounds of buf. This vulnerability can result in reading up to 4GB of process memory or potentially causing a segmentation fault (SEGV) when accessing invalid memory. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been identified in the gst_avi_subtitle_parse_gab2_chunk function within gstavisubtitle.c. The function reads the name_length value directly from the input file without checking it properly. Then, the a condition, does not properly handle cases where name_length is greater than 0xFFFFFFFF - 17, causing an integer overflow. In such scenario, the function attempts to access memory beyond the buffer leading to an OOB-read. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been found in the parse_ds64 function within gstwavparse.c. The parse_ds64 function does not check that the buffer buf contains sufficient data before attempting to read from it, doing multiple GST_READ_UINT32_LE operations without performing boundary checks. This can lead to an OOB-read when buf is smaller than expected. This vulnerability allows reading beyond the bounds of the data buffer, potentially leading to a crash (denial of service) or the leak of sensitive data. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read has been discovered in gst_wavparse_cue_chunk within gstwavparse.c. The vulnerability happens due to a discrepancy between the size of the data buffer and the size value provided to the function. This mismatch causes the comparison if (size < 4 + ncues * 24) to fail in some cases, allowing the subsequent loop to access beyond the bounds of the data buffer. The root cause of this discrepancy stems from a miscalculation when clipping the chunk size based on upstream data size. This vulnerability allows reading beyond the bounds of the data buffer, potentially leading to a crash (denial of service) or the leak of sensitive data. This vulnerability is fixed in 1.24.10. |
| GStreamer AV1 Video Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the parsing of metadata within AV1 encoded video files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-22300. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been identified in the gst_wavparse_smpl_chunk function within gstwavparse.c. This function attempts to read 4 bytes from the data + 12 offset without checking if the size of the data buffer is sufficient. If the buffer is too small, the function reads beyond its bounds. This vulnerability may result in reading 4 bytes out of the boundaries of the data buffer. This vulnerability is fixed in 1.24.10. |
| In GStreamer through 1.26.1, the subparse plugin's parse_subrip_time function may write data past the bounds of a stack buffer, leading to a crash. |
| In GStreamer through 1.26.1, the isomp4 plugin's qtdemux_parse_tree function may read past the end of a heap buffer while parsing an MP4 file, leading to information disclosure. |
| GStreamer before 1.16.0 has a heap-based buffer overflow in the RTSP connection parser via a crafted response from a server, potentially allowing remote code execution. |
| DOS / potential heap overwrite in mkv demuxing using HEADERSTRIP decompression. Integer overflow in matroskaparse element in gst_matroska_decompress_data function which causes a heap overflow. Due to restrictions on chunk sizes in the matroskademux element, the overflow can't be triggered, however the matroskaparse element has no size checks. |
| DOS / potential heap overwrite in mkv demuxing using bzip decompression. Integer overflow in matroskademux element in bzip decompression function which causes a segfault, or could cause a heap overwrite, depending on libc and OS. Depending on the libc used, and the underlying OS capabilities, it could be just a segfault or a heap overwrite. If the libc uses mmap for large chunks, and the OS supports mmap, then it is just a segfault (because the realloc before the integer overflow will use mremap to reduce the size of the chunk, and it will start to write to unmapped memory). However, if using a libc implementation that does not use mmap, or if the OS does not support mmap while using libc, then this could result in a heap overwrite. |
| DOS / potential heap overwrite in mkv demuxing using zlib decompression. Integer overflow in matroskademux element in gst_matroska_decompress_data function which causes a segfault, or could cause a heap overwrite, depending on libc and OS. Depending on the libc used, and the underlying OS capabilities, it could be just a segfault or a heap overwrite. If the libc uses mmap for large chunks, and the OS supports mmap, then it is just a segfault (because the realloc before the integer overflow will use mremap to reduce the size of the chunk, and it will start to write to unmapped memory). However, if using a libc implementation that does not use mmap, or if the OS does not support mmap while using libc, then this could result in a heap overwrite. |
| GStreamer H265 Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the parsing of H265 encoded video files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process.
. Was ZDI-CAN-21768. |
| Out-of-bounds read in the firmware for some 100GbE Intel(R) Ethernet Network Adapter E810 before version cvl fw 1.7.6, cpk 1.3.7 within Ring 0: Bare Metal OS may allow a denial of service. Network adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via network access when attack requirements are present with special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Heap-based Buffer Overflow vulnerability in TP-Link Archer AX53 v1.0 (tdpserver modules) allows adjacent attackers to cause a segmentation fault or potentially execute arbitrary code via a specially crafted network packet containing a maliciously formed field.This issue affects Archer AX53 v1.0: through 1.3.1 Build 20241120. |
| Heap-based Buffer Overflow vulnerability in TP-Link Archer AX53 v1.0 (tmpserver modules) allows authenticated adjacent attackers to cause a segmentation fault or potentially execute arbitrary code via a specially crafted network packet containing a field whose length exceeds the maximum expected value.This issue affects Archer AX53 v1.0: through 1.3.1 Build 20241120. |
| Heap-based Buffer Overflow vulnerability in TP-Link Archer AX53 v1.0 (tmpserver modules) allows authenticated adjacent attackers to cause a segmentation fault or potentially execute arbitrary code via a specially crafted network packet whose length exceeds the maximum expected value.This issue affects Archer AX53 v1.0: through 1.3.1 Build 20241120. |
| Heap-based Buffer Overflow vulnerability in TP-Link Archer AX53 v1.0 (tmpserver modules) allows authenticated adjacent attackers to cause a segmentation fault or potentially execute arbitrary code via a specially crafted network packet containing an excessive number of fields with zero‑length values.This issue affects Archer AX53 v1.0: through 1.3.1 Build 20241120. |
| Heap-based Buffer Overflow vulnerability in TP-Link Archer AX53 v1.0 (tmpserver modules) allows authenticated adjacent attackers to cause a segmentation fault or potentially execute arbitrary code via a specially crafted network packet containing an excessive number of fields with zero‑length values.This issue affects Archer AX53 v1.0: through 1.3.1 Build 20241120. |
| Heap-based Buffer Overflow vulnerability in TP-Link Archer AX53 v1.0 (tmpserver modules) allows authenticated adjacent attackers to cause a segmentation fault or potentially execute arbitrary code. The vulnerability arises from improper validation of a packet field whose offset is used to determine the write location in memory. By crafting a packet with a manipulated field offset, an attacker can redirect writes to arbitrary memory locations.This issue affects Archer AX53 v1.0: through 1.3.1 Build 20241120. |
