| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The CONS_HISTORY ioctl handler did not adequately validate the requested history size. A large value caused an integer overflow in the buffer size calculation, resulting in a heap allocation smaller than expected. Subsequent initialization of the buffer wrote beyond the end of the allocation.
An unprivileged local user with access to a vt(4) device can trigger an out-of-bounds write in the kernel, potentially escalating privileges. |
| A vulnerability was found in seladb PcapPlusPlus 25.05. The affected element is the function parse_by_block_type of the file light_pcapng.c of the component LightPcapNg Parser. Performing a manipulation of the argument captured_packet_length results in heap-based buffer overflow. It is possible to initiate the attack remotely. The attack's complexity is rated as high. The exploitability is described as difficult. The exploit has been made public and could be used. |
| GNU gzip contains a global buffer overflow vulnerability in the LZH decompression logic caused by improper reuse of shared global state between different decompression formats within a single execution. GNU gzip maintains a global array that is shared across the LZ77, LZW, and LZH decompression routines and is not reinitialized between files processed in the same invocation.
By decompressing a specially crafted LZW file followed by a specially crafted LZH file in a single gzip -d command, an attacker can poison the shared global state and subsequently trigger an out‑of‑bounds read in the LZH decoder. The LZH decompression logic follows stale values left in the shared array, causing reads past the end of the allocated global buffer.
This issue has been fixed in the commit 63dbf6b3b9e6e781df1a6a64e609b10e23969681 |
| libxml2 is vulnerable to multiple stack-based buffer overflows in the xmlcatalog utility when running in --shell mode. The usershell() function processes user input using fixed-size stack buffers without proper bounds checking.
By supplying an overly long input line, an attacker can overflow internal buffers (command, arg, and argv) during input parsing. This results in memory corruption within the stack frame.
Successful exploitation may cause a crash or potentially allow arbitrary code execution in the context of the xmlcatalog process.
This issue has been fixed in the commit c2e233fc.
NOTE:
The maintainers of this project did not agree that this issue is a vulnerability and considered it a bug. |
| A vulnerability was determined in seladb PcapPlusPlus 25.05. The impacted element is the function pcpp::SSLClientHelloMessage::getHandshakeVersion of the file Packet++/src/SSLHandshake.cpp of the component TLS Hello Handler. Executing a manipulation of the argument handshakeVersion can lead to heap-based buffer overflow. It is possible to launch the attack remotely. This attack is characterized by high complexity. The exploitability is regarded as difficult. The exploit has been publicly disclosed and may be utilized. This patch is called 98e671010bc7c87b95898c22ae289220ae92542b. It is best practice to apply a patch to resolve this issue. |
| A vulnerability was identified in seladb PcapPlusPlus 25.05. This affects the function pcpp::TelnetLayer::getSubCommand of the file Packet++/src/TelnetLayer.cpp of the component Telnet Subnegotiation Packet Handler. The manipulation leads to heap-based buffer overflow. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitability is reported as difficult. The exploit is publicly available and might be used. The identifier of the patch is 98e671010bc7c87b95898c22ae289220ae92542b. It is recommended to apply a patch to fix this issue. |
| A flaw was found in libsolv. This stack-based buffer overflow vulnerability occurs in libsolv's Debian metadata parser when processing specially crafted Debian repository metadata. An attacker could exploit this by providing malicious SHA384 or SHA512 checksum tags, leading to memory corruption and a denial of service (DoS) in the affected system. |
| A flaw has been found in Edimax EW-7478APC 1.04. This issue affects the function formUSBAccount of the file /goform/formUSBAccount of the component POST Request Handler. This manipulation of the argument UserName/Password causes buffer overflow. The attack is possible to be carried out remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in Edimax EW-7478APC 1.04. This affects the function formQoS of the file /goform/formQoS of the component POST Request Handler. The manipulation of the argument selSSID leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| This affects versions of the package angular from 1.3.0; versions of the package angularjs from 1.3.0. A regular expression used to split the value of the ng-srcset directive is vulnerable to super-linear runtime due to backtracking. With large carefully-crafted input, this can result in catastrophic backtracking and cause a denial of service.
**Note:**
This package is EOL and will not receive any updates to address this issue. Users should migrate to [@angular/core](https://www.npmjs.com/package/@angular/core). |
| js-yaml is a JavaScript YAML parser and dumper. Prior to 4.2.0 and 3.15.0, a crafted YAML document can trigger algorithmic CPU exhaustion in js-yaml merge-key processing (<<) by repeating the same alias many times in a merge sequence. This causes quadratic parse-time behavior relative to input size and can block a Node.js worker/event loop for seconds with a relatively small payload (tens of KB), resulting in denial of service. The issue is in merge handling inside lib/loader.js. This vulnerability is fixed in 4.2.0 and 3.15.0. |
| Nmap through 7.99 does not keep the IPv6 extension-header walk within the captured packet in ipv6_get_data_primitive (libnetutil/netutil.cc), so the pointer advances past the buffer and the remaining-length computation underflows to a large value. A scanned target or on-path attacker returning a crafted IPv6 response with a truncated extension header can trigger out-of-bounds reads and a crash during raw IPv6 scans. |
| A security vulnerability has been detected in Tenda JD12L 16.03.53.23. Impacted is the function formSetPPTPServer of the file /goform/SetPptpServerCfg. Such manipulation of the argument startIp leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: Reserve an extra page for early kernel mapping
The final part of [data, end) segment may overflow into the next page of
init_pg_end[1] which is the gap page before early_init_stack[2]:
[1]
crash_arm64_v9.0.1> vtop ffffffed00601000
VIRTUAL PHYSICAL
ffffffed00601000 83401000
PAGE DIRECTORY: ffffffecffd62000
PGD: ffffffecffd62da0 => 10000000833fb003
PMD: ffffff80033fb018 => 10000000833fe003
PTE: ffffff80033fe008 => 68000083401f03
PAGE: 83401000
PTE PHYSICAL FLAGS
68000083401f03 83401000 (VALID|SHARED|AF|NG|PXN|UXN)
PAGE PHYSICAL MAPPING INDEX CNT FLAGS
fffffffec00d0040 83401000 0 0 1 4000 reserved
[2]
ffffffed002c8000 (r) __pi__data
ffffffed0054e000 (d) __pi___bss_start
ffffffed005f5000 (b) __pi_init_pg_dir
ffffffed005fe000 (b) __pi_init_pg_end
ffffffed005ff000 (B) early_init_stack
ffffffed00608000 (b) __pi__end
For 4K pages, the early kernel mapping may use 2MB block entries but the
kernel segments are only 64KB aligned. Segment boundaries that fall
within a 2MB block therefore require a PTE table so that different
attributes can be applied on either side of the boundary.
KERNEL_SEGMENT_COUNT still correctly counts the five permanent kernel
VMAs registered by declare_kernel_vmas(). However, since commit
5973a62efa34 ("arm64: map [_text, _stext) virtual address range
non-executable+read-only"), the early mapper also maps [_text, _stext)
separately from [_stext, _etext). This adds one more early-only split
and can require one more page-table page than the existing
EARLY_SEGMENT_EXTRA_PAGES allowance reserves.
Increase the 4K-page early mapping allowance by one page to cover that
additional split.
[catalin.marinas@arm.com: rewrote part of the commit log]
[catalin.marinas@arm.com: expanded the code comment] |
| In the Linux kernel, the following vulnerability has been resolved:
tty: hvc_iucv: fix off-by-one in number of supported devices
MAX_HVC_IUCV_LINES == HVC_ALLOC_TTY_ADAPTERS == 8.
This is the number of entries in:
static struct hvc_iucv_private *hvc_iucv_table[MAX_HVC_IUCV_LINES];
Sometimes hvc_iucv_table[] is limited by:
(a) if (num > hvc_iucv_devices) // for error detection
or
(b) for (i = 0; i < hvc_iucv_devices; i++) // in 2 places
(so these 2 don't agree; second one appears to be correct to me.)
hvc_iucv_devices can be 0..8. This is a counter.
(c) if (hvc_iucv_devices > MAX_HVC_IUCV_LINES)
If hvc_iucv_devices == 8, (a) allows the code to access hvc_iucv_table[8].
Oops. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: mailbox-test: don't free the reused channel
The RX channel can be aliased to the TX channel if it has a different
MMIO. This special case needs to be handled when freeing the channels
otherwise a double-free occurs. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: add sanity check for channel array
Fail gracefully if there is no channel array attached to the mailbox
controller. Otherwise the later dereference will cause an OOPS which
might not be seen because mailbox controllers might instantiate very
early. Remove the comment explaining the obvious while here. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sg: Resolve soft lockup issue when opening /dev/sgX
The parameter def_reserved_size defines the default buffer size reserved
for each Sg_fd and should be restricted to a range between 0 and 1,048,576
(see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although the
function sg_proc_write_dressz enforces this limit, it is possible to bypass
it by directly modifying the module parameter as shown below, which then
causes a soft lockup:
echo -1 > /sys/module/sg/parameters/def_reserved_size
exec 4<> /dev/sg0
watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds! [bash:537]
Modules loaded:
CPU: 5 UID: 0 PID: 537 Command: bash, kernel version 6.19.0-rc3+ #134,
PREEMPT disabled
Hardware: QEMU Standard PC (i440FX + PIIX, 1996), BIOS version
1.16.1-2.fc37 dated 04/01/2014
...
Call Trace:
sg_build_reserve+0x5c/0xa0
sg_add_sfp+0x168/0x270
sg_open+0x16e/0x340
chrdev_open+0xbe/0x230
do_dentry_open+0x175/0x480
vfs_open+0x34/0xf0
do_open+0x265/0x3d0
path_openat+0x110/0x290
do_filp_open+0xc3/0x170
do_sys_openat2+0x71/0xe0
__x64_sys_openat+0x6d/0xa0
do_syscall_64+0x62/0x310
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The fix is to use module_param_cb to validate and reject invalid values
assigned to def_reserved_size. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: Place upper limit on station AID
Any station configured with an AID over 20 causes a firmware crash.
This situation occurred in our testing using an AP interface on 7922
hardware, with a modified hostapd, sourced from Mediatek's OpenWRT
feeds.
In stock hostapd, station AIDs begin counting at 1, and this
configuration is prevented with an upper limit on associated stations.
However, the modified hostapd began allocation at 65, which caused the
firmware to crash. This fix does not allow these AIDs to work, but will
prevent the firmware crash.
This crash was only seen on IFTYPE_AP interfaces, and the fix does not
appear to have an effect on IFTYPE_STATION behavior. |
| A vulnerability was identified in Wavlink WL-NU516U1-A M16U1_V240425. The impacted element is the function sub_407504 of the file /cgi-bin/wireless.cgi of the component POST Parameter Handler. Such manipulation of the argument Guest_ssid leads to stack-based buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. It is suggested to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
