| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability has been found in Edimax EW-7478APC 1.04. This impacts the function formL2TPSetup of the file /goform/formL2TPSetup of the component POST Request Handler. Such manipulation of the argument L2TPUserName leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kexec: Push kjump return address even for non-kjump kexec
The version of purgatory code shipped by kexec-tools attempts to look above
the top of its stack to find a return address for a kjump, even in a non-kjump
kexec.
After the commit in Fixes: the word above the stack might not be there,
leading to a fault (which is at least now caught by my exception-handling code
in kexec).
That commit fixed things for the actual kjump path, but no longer
"gratuitously" pushes the unused return address to the stack in the non-kjump
path. Put that *back* in the non-kjump path, to prevent purgatory from
crashing when trying to access it. |
| A vulnerability was found in Edimax EW-7478APC 1.04. Affected is the function formPPPoESetup of the file /goform/formPPPoESetup of the component POST Request Handler. Performing a manipulation of the argument pppUserName results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in Tenda JD12L 16.03.53.23. The affected element is the function fromSetWifiGusetBasic of the file /goform/WifiGuestSet. Performing a manipulation of the argument shareSpeed results in stack-based buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used. |
| A security flaw has been discovered in Investintech SlimPDFReader up to 2.0.14. Affected by this issue is the function SlimPDFReader!Investintech::PCV::TeighaDo+0x25cde0 of the file SlimPDFReader.exe of the component PDF File Handler. Performing a manipulation results in out-of-bounds read. It is possible to initiate the attack remotely. This vulnerability only affects products that are no longer supported by the maintainer. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.35.11, 1.36.7, 1.37.3, and 1.38.1, destructor of JSON Object results in stack overflow when deeply O(100K) nested objects are present. This vulnerability is fixed in 1.35.11, 1.36.7, 1.37.3, and 1.38.1. |
| OpenProject is open-source, web-based project management software. Prior to , the official openproject/openproject Docker image ships ENV SECRET_KEY_BASE=OVERWRITE_ME as the default Rails master key. Combined with cookies_serializer = :marshal, this gives any logged-in user a deterministic Marshal-deserialization path reachable via the /my/two_factor_devices cookie reader This vulnerability is fixed in . |
| Kestra is an open-source, event-driven orchestration platform. Prior to 1.0.45 and 1.3.21, AuthenticationFilter in Kestra OSS uses request.getPath().endsWith("/configs") to whitelist the public configuration endpoint from Basic Auth. Because the check is a suffix match rather than an exact path match, any API path whose last segment is configs bypasses authentication entirely. An unauthenticated remote attacker can exploit this to create and execute arbitrary workflows without credentials. Because Kestra ships with script execution plugins (plugin-script-shell, plugin-script-python, etc.) enabled by default, this directly results in unauthenticated Remote Code Execution as root inside the Kestra worker container. This vulnerability is fixed in 1.0.45 and 1.3.21. |
| Eclipse tinydtls before commit b3efd41ad111a4920f599f51ffa4f5e9f1e72221 contains an out-of-bounds read vulnerability in the check_server_certificate() function that allows unauthenticated attackers to trigger reads beyond valid buffer boundaries by crafting a Certificate handshake message with a specific fragment_length value. Attackers can exploit missing buffer length validation before uint24 reads, memcmp, and memcpy operations during DTLS epoch 0 on both client and server paths to cause denial of service on memory-constrained devices. |
| dsp_mmap_single() validated the requested mapping by checking the sum of the user-supplied offset and length against the buffer size. This addition could overflow, so that a large offset and length wrapped around and passed the check. The offset was then narrowed from 64 to 32 bits when converted to a buffer address, yielding a mapping that extended past the audio buffer into unrelated kernel memory.
The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS). |
| The ELF image activator cleared per-process ASLR preference flags for setuid binaries after the code that computes the PIE base address, rather than before. As a result, a user-requested ASLR disable was still in effect at the point where the base address was chosen.
An unprivileged local user can disable ASLR for a setuid PIE binary by calling procctl(2) before execve(2). This makes exploitation of any separate memory corruption vulnerability in that binary significantly easier. |
| A flaw has been found in Tenda JD12L 16.03.53.23. The impacted element is the function formWifiBasicSet of the file /goform/WifiBasicSet. Executing a manipulation of the argument security_5g can lead to stack-based buffer overflow. The attack may be launched remotely. The exploit has been published and may be used. |
| libssh2 through 1.11.1 reads an attacker-controlled 32-bit attribute count from a publickey-subsystem response and uses it in the allocation num_attrs * sizeof(libssh2_publickey_attribute) without bounds checking, so on 32-bit platforms the multiplication overflows to an undersized buffer. A malicious SSH server can then drive the attribute-parsing loop to write past the allocation, causing a heap buffer overflow in a connecting libssh2 client. |
| Flowise before 3.1.3 validates Custom MCP stdio environment variables against a denylist using a case-sensitive comparison, so on Windows, where environment names are case-insensitive, supplying 'node_options' bypasses the NODE_OPTIONS denylist entry. An authenticated user who can configure a Custom MCP node can thereby inject NODE_OPTIONS --require and execute arbitrary code in the Flowise server context. |
| A vulnerability was found in Tenda JD12L 16.03.53.23. This impacts the function fromNatStaticSetting of the file /goform/NatStaticSetting. The manipulation of the argument page results in stack-based buffer overflow. The attack can be executed remotely. The exploit has been made public and could be used. |
| A flaw was found in spice-vdagent. A malicious or compromised SPICE host can trigger an integer overflow by sending a specially crafted message. This vulnerability can lead to a heap buffer overflow, causing the spice-vdagent daemon to crash and resulting in a Denial of Service (DoS) for the virtual machine. This issue requires the SPICE host to be untrusted or compromised for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - Cap AEAD AD length to 0x80000000
In order to prevent arithmetic overflows when checking the TX
buffer size, cap the associated data length to 0x80000000. |
| A vulnerability exists in UEFI implementations that use a hard-coded software-based Platform Key (PK). An attacker in possession of the corresponding PK private key can sign arbitrary UEFI executables or firmware components, causing them to be trusted by affected systems and potentially bypassing UEFI Secure Boot trust validation. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Limit XDomain response copy to actual frame size
tb_xdomain_copy() copies req->response_size bytes from the received
packet buffer regardless of the actual frame size. When a short
response arrives, this reads past the valid frame data in the DMA
pool buffer into stale contents from previous transactions.
Use the minimum of frame size and expected response size for the
copy length. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bridge: make ebt_snat ARP rewrite writable
The ebtables SNAT target keeps the Ethernet source address rewrite
behind skb_ensure_writable(skb, 0). This is intentional: at the bridge
ebtables hooks the Ethernet header is addressed through
skb_mac_header()/eth_hdr(), while skb->data points at the Ethernet
payload. Asking skb_ensure_writable() for ETH_HLEN bytes would check
the payload, not the Ethernet header, and would reintroduce the small
packet regression fixed by commit 63137bc5882a.
However, the optional ARP sender hardware address rewrite is different.
It writes through skb_store_bits() at an offset relative to skb->data:
skb_store_bits(skb, sizeof(struct arphdr), info->mac, ETH_ALEN)
skb_header_pointer() only safely reads the ARP header; it does not make
the later sender hardware address range writable. If that range is
still held in a nonlinear skb fragment backed by a splice-imported file
page, skb_store_bits() maps the frag page and copies the new MAC address
directly into it.
Ensure the ARP SHA range is writable before reading the ARP header and
before calling skb_store_bits(). |
