| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In JetBrains WebStorm before 2026.2 arbitrary code execution was possible via a project-supplied linter configuration |
| Exim before 4.99.5 allows .forward privilege escalation because force_command for a pipe transport is mishandled. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: fix use-after-free on marvell probe failure
Make sure to stop any TX URBs submitted during Marvell OOB wakeup
configuration on later probe failures to avoid use-after-free in the
completion callback.
This issue was reported by Sashiko while reviewing a fix for a wakeup
source leak in the btusb probe errors paths. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix MLE defragmentation
If either reconf or EPCS multi-link element (MLE) is contained in
a non-transmitted profile, the defragmentation routine is called
with a pointer to the defragmented copy, but the original elements.
This is incorrect for two reasons:
- if the original defragmentation was needed, it will not find the
correct data
- if the original frame is at a higher address, the parsing will
potentially overrun the heap data (though given the layout of
the buffers, only into the new defragmentation buffer, and then
it has to stop and fail once that's filled with copied data.
Fix it by tracking the container along with the pointer and in
doing so also unify the two almost identical defragmentation
routines. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit
The struct pernet_operations docstring in include/net/net_namespace.h
explicitly warns against blocking RCU primitives in .exit handlers:
Exit methods using blocking RCU primitives, such as
synchronize_rcu(), should be implemented via exit_batch.
[...]
Please, avoid synchronize_rcu() at all, where it's possible.
Note that a combination of pre_exit() and exit() can
be used, since a synchronize_rcu() is guaranteed between
the calls.
xfrm_policy_fini() violates this: it calls synchronize_rcu() before
freeing the policy_bydst hash tables (so no RCU reader is mid-
traversal at free time), but runs from xfrm_net_ops.exit -- once per
namespace -- so a cleanup_net() of N namespaces pays N full RCU
grace periods serially.
Use the documented pre_exit/exit split. Move the policy flush (and
the workqueue drains it depends on) into a new .pre_exit handler;
xfrm_policy_fini() then runs in .exit and frees the hash tables
after the synchronize_rcu_expedited() that cleanup_net() guarantees
between the two phases. Providing O(1) RCU grace periods per batch
instead of O(N).
Observed on Linux 6.18 with a workload doing unshare(CLONE_NEWNET)
at ~13/sec sustained: cleanup_net() and the netns_wq rescuer kthread
both stuck in xfrm_policy_fini()'s synchronize_rcu(), >300k struct
net accumulated in the cleanup queue, Percpu in /proc/meminfo climbed
to 130+ GB on 256-CPU hosts, and memcg OOMs followed. setup_net and
__put_net counts were balanced, ruling out a refcount leak. |
| Use after free in V8 in Google Chrome prior to 151.0.7922.72 allowed a remote attacker who had compromised the renderer process to potentially perform out of bounds memory access via a crafted HTML page. (Chromium security severity: Medium) |
| FreeRDP before 3.29.0 contains client-side heap use-after-free vulnerabilities in the async update message proxy for RAIL WINDOW_STATE_ORDER and NOTIFY_ICON_STATE_ORDER when AsyncUpdate is enabled. When a malicious or compromised RDP server sends crafted update orders, the message proxy shallow-copies structures containing nested parser-owned pointers (e.g., titleInfo.string, windowRects, visibilityRects, icon buffers). The parser frees those nested buffers after the callback returns, so the queued async message later dispatches stale pointers, potentially causing memory corruption or a client crash. |
| sqlite3 provides Ruby bindings for the SQLite3 embedded database. In version 2.9.4 and earlier, redefining a SQLite function with a different arity frees the previously registered function handler while SQLite may still reference it, resulting in a use-after-free. This issue is fixed in version 2.9.5. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity-fec: fix reading parity bytes split across blocks (take 3)
fec_decode_bufs() assumes that the parity bytes of the first RS codeword
it decodes are never split across parity blocks.
This assumption is false. Consider v->fec->block_size == 4096 &&
v->fec->roots == 17 && fio->nbufs == 1, for example. In that case, each
call to fec_decode_bufs() consumes v->fec->roots * (fio->nbufs <<
DM_VERITY_FEC_BUF_RS_BITS) = 272 parity bytes.
Considering that the parity data for each message block starts on a
block boundary, the byte alignment in the parity data will iterate
through 272*i mod 4096 until the 3 parity blocks have been consumed. On
the 16th call (i=15), the alignment will be 4080 bytes into the first
block. Only 16 bytes remain in that block, but 17 parity bytes will be
needed. The code reads out-of-bounds from the parity block buffer.
Fortunately this doesn't normally happen, since it can occur only for
certain non-default values of fec_roots *and* when the maximum number of
buffers couldn't be allocated due to low memory. For example with
block_size=4096 only the following cases are affected:
fec_roots=17: nbufs in [1, 3, 5, 15]
fec_roots=19: nbufs in [1, 229]
fec_roots=21: nbufs in [1, 3, 5, 13, 15, 39, 65, 195]
fec_roots=23: nbufs in [1, 89]
Regardless, fix it by refactoring how the parity blocks are read. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_counter: serialize reset with spinlock
Add a global static spinlock to serialize counter fetch+reset
operations, preventing concurrent dump-and-reset from underrunning
values.
The lock is taken before fetching the total so that two parallel
resets cannot both read the same counter values and then both
subtract them.
A global lock is used for simplicity since resets are infrequent.
If this becomes a bottleneck, it can be replaced with a per-net
lock later. |
| Untrusted Pointer Dereference in ASUS System Control Interface v3, ASUS System Control Interface, and ASUS Business Manager allows a local administrator to perform arbitrary physical memory read and write operations via crafted IOCTL requests to the driver, bypassing OS-enforced memory protections.
Refer to the '
Security Update for ASUS System Control Interface ' section on the ASUS Security Advisory for more information. |
| Bridge is affected by an Untrusted Pointer Dereference vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| In JetBrains PyCharm before 2026.1.4, 2026.2 arbitrary code execution via malicious Python executable was possible on untrusted project open |
| In the Linux kernel, the following vulnerability has been resolved:
USB: chaoskey: Fix slab-use-after-free in chaoskey_release()
The chaoskey driver has a use-after-free bug in its release routine.
If the user closes the device file after the USB device has been
unplugged, a debugging log statement will try to access the
usb_interface structure after it has been deallocated:
BUG: KASAN: slab-use-after-free in dev_driver_string (drivers/base/core.c:2406)
Read of size 8 at addr ffff888168e8a0b8 by task chaoskey_raw_re/10106
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
dev_driver_string (drivers/base/core.c:2406)
__dynamic_dev_dbg (lib/dynamic_debug.c:906)
chaoskey_release (drivers/usb/misc/chaoskey.c:323)
__fput (fs/file_table.c:510)
fput_close_sync (fs/file_table.c:615)
__x64_sys_close (fs/open.c:1507 fs/open.c:1492 fs/open.c:1492)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
The driver's last reference to the interface structure is dropped in
the chaoskey_free() routine, so the code must not use the interface --
even in a debugging statement -- after that routine returns.
(Exception: If we know that another reference is held by someone else,
such as the device core while the disconnect routine runs, there's no
problem. Thanks to Johan Hovold for pointing this out.)
Since the bad access is part of an unimportant debugging statement,
we can fix the problem simply by removing the whole statement. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/cs35l41: Fix firmware load work teardown
cs35l41_hda creates ALSA controls whose private data points at the
cs35l41_hda object. The firmware load control can also queue
fw_load_work.
Those controls are not removed on component unbind, and device remove
only cancels fw_load_work through cs35l41_remove_dsp(). That helper is
skipped when halo_initialized is false. With firmware_autostart
disabled, a firmware load can be requested before the DSP has been
initialized. If the component or device is removed before the queued
work runs, the worker can run after teardown and dereference driver
state that is no longer valid.
Track the created controls and remove them on unbind so no new control
callback can reach the driver data or queue more work. Then cancel
fw_load_work to drain any request that was already queued. Also cancel
the work unconditionally during device remove before runtime PM teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: us144mkii: fix work UAF on disconnect
tascam_disconnect() cancels capture_work and midi_in_work before
usb_kill_anchored_urbs() kills the capture/MIDI-in URBs. Those URBs
self-resubmit, and their completion handlers reschedule the work.
A URB that completes in the small window between cancel_work_sync() and
usb_kill_anchored_urbs() therefore re-arms the work after its only
cancel. Nothing cancels it again before snd_card_free() frees the
card-private tascam structure, so the work handler then runs on freed
memory.
Kill the anchored URBs before cancelling the work; once the work is
cancelled no remaining URB can complete to re-arm it. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: restore RCU grace period in tcp_ao_destroy_sock
Commit 51e547e8c89c ("tcp: Free TCP-AO/TCP-MD5 info/keys without RCU")
removed the call_rcu() callback from tcp_ao_destroy_sock(), arguing that
"the destruction of info/keys is delayed until the socket destructor"
and therefore "no one can discover it anymore".
That argument does not hold for the call site in tcp_connect()
(net/ipv4/tcp_output.c:4327-4332). At that point the socket is in
TCP_SYN_SENT, has already been inserted into the inet ehash by
inet_hash_connect() in tcp_v4_connect(), and is therefore very much
discoverable: any softirq running tcp_v4_rcv() on another CPU can take
the socket out of the ehash, walk into tcp_inbound_hash(), and load
tp->ao_info via implicit RCU before bh_lock_sock_nested() is taken on
the destroying CPU.
The reader path then enters __tcp_ao_do_lookup() (net/ipv4/tcp_ao.c:208)
which re-loads tp->ao_info via rcu_dereference_check(); the re-load can
still observe the (about-to-be-freed) pointer because there is no
synchronize_rcu() between rcu_assign_pointer(tp->ao_info, NULL) and
tcp_ao_info_free() in tcp_ao_destroy_sock(). The captured pointer is
then walked at line 223:
hlist_for_each_entry_rcu(key, &ao->head, node, ...)
The writer's synchronous kfree() is free to complete between the line
218 re-fetch and the line 223 hlist iteration. The slab is reused
(or simply LIST_POISON1-stamped if not yet reused) and the iteration
walks attacker-controlled or poison memory in softirq context.
Reproducer (no debug shim, stock x86_64 v7.1-rc2 SMP+KASAN, QEMU+KVM):
an unprivileged uid=1000 process inside CLONE_NEWUSER|CLONE_NEWNET
installs TCP_MD5SIG + TCP_AO_ADD_KEY on a TCP socket, sprays forged
TCP-AO segments toward its eventual 4-tuple via raw sockets, then
calls connect(). The md5-wins reconciliation in tcp_connect() fires
tcp_ao_destroy_sock(); the softirq backlog reader on the loopback
NAPI path crashes on the freed ao->head.first walk:
Oops: general protection fault, probably for non-canonical
address 0xfbd59c000000002f
KASAN: maybe wild-memory-access in range
[0xdead000000000178-0xdead00000000017f]
CPU: 0 UID: 1000 PID: 100 Comm: repro_userns
RIP: 0010:__tcp_ao_do_lookup+0x107/0x1c0
Call Trace: <IRQ>
__tcp_ao_do_lookup+0x107/0x1c0
tcp_ao_inbound_lookup.constprop.0+0x12a/0x200
tcp_inbound_ao_hash+0x5ea/0x1520
tcp_inbound_hash+0x7ce/0x1240
tcp_v4_rcv+0x1e7a/0x3e10
...
Restore the RCU grace period: re-add struct rcu_head to tcp_ao_info
and replace the synchronous tcp_ao_info_free() with a call_rcu()
callback. Readers that captured tp->ao_info before rcu_assign_pointer
NULLed it now see the object remain valid until rcu_read_unlock().
With the patch applied the reproducer runs cleanly for 2000 iterations
on the same kernel build. |
| In the Linux kernel, the following vulnerability has been resolved:
binder: fix UAF in binder_thread_release()
When a thread exits, binder_thread_release() walks its transaction stack
to clear the t->from and t->to_proc that correspond with the exiting
thread. However, a process dying in parallel might attempt to kfree some
of these transactions. And if one of them has no associated t->to_proc,
the t->to_proc->inner_lock will not be acquired.
This means that transaction accesses in binder_thread_release() after
t->to_proc has been cleared might race with binder_free_transaction()
and cause a use-after-free error as reported by KASAN:
==================================================================
BUG: KASAN: slab-use-after-free in binder_thread_release+0x5d0/0x798
Write of size 8 at addr ffff000016627500 by task X/715
CPU: 17 UID: 0 PID: 715 Comm: X Not tainted 7.1.0-rc5-00149-g8fde5d1d47f6 #30 PREEMPT
Hardware name: linux,dummy-virt (DT)
Call trace:
binder_thread_release+0x5d0/0x798
binder_ioctl+0x12c0/0x299c
[...]
Allocated by task 717 on cpu 18 at 67.267803s:
__kasan_kmalloc+0xa0/0xbc
__kmalloc_cache_noprof+0x174/0x444
binder_transaction+0x554/0x8150
binder_thread_write+0xa30/0x4354
binder_ioctl+0x20f0/0x299c
[...]
Freed by task 202 on cpu 18 at 90.416221s:
__kasan_slab_free+0x58/0x80
kfree+0x1a0/0x4a4
binder_free_transaction+0x150/0x294
binder_send_failed_reply+0x398/0x6d8
binder_release_work+0x3e4/0x4ec
binder_deferred_func+0xbd8/0x104c
[...]
==================================================================
In order to avoid this, make sure that binder_free_transaction() reads
the t->to_proc under the transaction lock. This will serialize the
transaction release with the accesses in binder_thread_release(). Plus,
it matches the documented locking rules for @to_proc. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: fix use-after-free on registration failure
Make sure to release the sibling interfaces in case controller
registration fails to avoid use-after-free and double-free when they are
eventually disconnected.
This issue was reported by Sashiko while reviewing a fix for a wakeup
source leak in the btusb probe errors paths. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: temperature: tmp006: use devm_iio_trigger_register
tmp006_probe() allocates the DRDY trigger with devm_iio_trigger_alloc()
but registers it with plain iio_trigger_register(). The driver has no
.remove() callback, so on module unload the trigger stays in the global
trigger list while its memory is freed by devm, leaving a dangling
entry.
Switch to devm_iio_trigger_register() so the registration is undone in
the same devm scope as the allocation. |
