| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Input Validation vulnerability in Apache Camel.
This issue affects Apache Camel: through 4.14.7, from 4.15.0 through 4.18.2, from 4.19.0 through 4.20.0.
Users are recommended to upgrade to version 4.14.8, 4.18.3, 4.21.0, which fixes the issue. |
| Improper Input Validation vulnerability in Apache Camel Cometd Component.
The camel-cometd component maps inbound Bayeux (CometD) message headers into the Camel Exchange without applying a HeaderFilterStrategy. CometdBinding.populateExchangeFromMessage copies the entire ext.CamelHeaders map supplied by the CometD client directly onto the Camel message (message.setHeaders), so any header name - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelJmsDestinationName - is accepted unmodified. Because a CometdComponent installs no Bayeux SecurityPolicy by default, any client that can complete the Bayeux handshake against the CometD endpoint can publish such a message without authentication. An attacker can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a JMS destination); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix implements a HeaderFilterStrategy in the camel-cometd binding (a long-standing TODO in the code) that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound CometD messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and install an explicit Bayeux SecurityPolicy on the CometdComponent so that only authenticated clients can publish. |
| Uncontrolled Resource Consumption vulnerability in Apache IoTDB.
Some interface fails to impose reasonable
limits on the time span and aggregation interval of the query. An attacker
can construct a request with extreme parameters (e.g., a very large time
range combined with a minimal interval). This forces the DataNode to build
an enormous result set in memory, which exhausts the Java heap and causes
the DataNode process to crash.
This issue affects Apache IoTDB: from 1.3.3 before 2.0.8.
Users are recommended to upgrade to version 2.0.8, which fixes the issue. |
| Missing Critical Step in Authentication vulnerability in Apache Tomcat when the JNDIRealm was configured to authenticate binds using GSSAPI allowed attackers to authenticate without provided the correct password.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.4, from 10.1.0-M1 through 10.1.36, from 9.0.0.M1 through 9.0.100, from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109.
Users are recommended to upgrade to version 11.0.5, 10.1.37 or 9.0.101, which fixes the issue. |
| Missing Authorization vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ All, Apache ActiveMQ.
Apache ActiveMQ Classic temporary destinations are expected to be isolated to the connection that created them. The isolation can be broken as this is only checked in the client, allowing a different connection to consume from another connection's temporary
destination.
This issue affects Apache ActiveMQ Broker: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7, which fixes the issue. |
| Memory Allocation with Excessive Size Value vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ Stomp.
An unauthenticated client that opens a STOMP NIO connection can send header bytes that never terminate which makes the broker buffer them without limit, exhausting the JVM heap.
This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Stomp: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Apache ActiveMQ, Apache ActiveMQ Web Console.
The browse page in the web console renders a message Id directly without sanitization. This allows an authenticated producer to send a message with a JMS message ID that has been crafted to contain HTML/JavaScript such that when an administrator browses the queue in the Web Console, the payload executes in their browser.
This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Web Console: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue. |
| Denial of Service via Out of Memory vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ, Apache ActiveMQ All.
Following the fix for CVE-2026-49270 an unauthenticated attacker can now cause broker OOM by sending an repeated BrokerInfo commands without sending a ConnectionInfo, until the broker will crash with OOM.
This issue affects Apache ActiveMQ Broker: from 5.19.7 before 5.19.8, from 6.2.6 before 6.2.7; Apache ActiveMQ: from 5.19.7 before 5.19.8, from 6.2.6 before 6.2.7; Apache ActiveMQ All: from 5.19.7 before 5.19.8, from 6.2.6 before 6.2.7.
Users are recommended to upgrade to version 6.2.7, which fixes the issue. |
| Improper Input Validation vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ Stomp.
A remote unauthenticated peer that can reach an exposed STOMP connector can trigger denial-of-service behavior by sending a negative content-length. For the NIO STOMP transport, an attacker can keep streaming body bytes and grow the per-connection command buffer beyond configured limits to cause OOM. For the blocking STOMP protocol, an error will instead force abnormal transport exception handling for the affected connection and closure.
This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Stomp: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue. |
| SQL misconfiguration in the Gravitino UI, in versions 1.0.0 and below, can allow a malicious user to read or truncate files.
Users are recommended to upgrade to version 1.0.0, which fixes this issue. |
| Memory Allocation with Excessive Size Value vulnerability in Apache ActiveMQ Client, Apache ActiveMQ, Apache ActiveMQ All.
An unauthenticated network attacker can cause a broker DoS by sending a crafted WireFormatInfo frame with a malicious large size value. The value is not validate and causes the broker to attempt allocation during pre-auth negotiation which can trigger OOM and crash the broker.
This issue affects Apache ActiveMQ Client: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue. |
| Memory Allocation with Excessive Size Value vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ Client, Apache ActiveMQ Broker.
An authenticated user can cause a broker DoS by sending a crafted OpenWire Message with a large encoded size value for the map. OpenWire message property maps are unmarshaled without size validation which can trigger OOM and crash the broker.
This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Client: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Broker: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue. |
| Improper Input Validation vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ, Apache ActiveMQ All.
An attacker that has access to publish or modify entries in LDAP that match the configured searchBase and searchFilter can instantiate denied transports inside the broker JVM. This can be used to fetch an attacker URL and spawn a second BrokerService inside the same JVM.
This issue affects Apache ActiveMQ Broker: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue. |
| Improper Authorization vulnerability in Apache ActiveMQ.
An authenticated low-privilege Web Console user by default can access /admin/* paths in the Web Console. The default Jetty settings incorrectly did not limit those paths to only admins.
This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue. |
| Always-Incorrect Control Flow Implementation vulnerability in Apache Tomcat meant that special roles and empty authorisation constraints were not included when the effective web.xml was logged.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.22, from 10.1.0-M1 through 10.1.55, from 9.0.0.M1 through 9.0.118, from 8.5.0 through 8.5.100. Other versions that have reached end of support may also be affected.
Users are recommended to upgrade to version 11.0.23, 10.1.56 or 9.0.119 which fixes the issue. |
| Improper Authorization vulnerability in Apache Tomcat leads to security constraints specified for the default servlet ignoring any method or method omission configured as part of the constraint.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.22, from 10.1.0-M1 through 10.1.55, from 9.0.0.M1 through 9.0.118, from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other versions that have reached end of support may also be affected.
Users are recommended to upgrade to version 11.0.23, 10.1.56 or 9.0.119, which fix the issue. |
| Improper Authentication vulnerability in Apache Tomcat allowed a replay attack against the EncryptionInterceptor in the cluster component.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.22, from 10.1.0-M1 through 10.1.55, from 9.0.13 through 9.0.18, from 8.5.38 through 8.5.100, from 7.0.100 through 7.0.109.
Users are recommended to upgrade to version 11.0.23, 10.1.56, 9.0.119, which fixes the issue. |
| Improper Neutralization of Script-Related HTML Tags in a Web Page (Basic XSS) vulnerability in the number guess example for Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.22, from 10.1.0-M1 through 10.1.55, from 9.0.0.M1 through 9.0.118, from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other versions that have reached end of support may also be affected.
Users are recommended to upgrade to version 11.0.23, 10.1.56 or 9.0.119, which fix the issue. |
| Always-Incorrect Control Flow Implementation vulnerability in Apache Tomcat's rewrite valve meant that if the first condition in an OR chain matched, subsequent non-OR conditions were skipped.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.22, from 10.1.0-M1 through 10.1.55, from 9.0.0.M1 through 9.0.118, from 8.5.0 through 8.5.100. Other versions that have reached end of support may also be affected.
Users are recommended to upgrade to version 11.0.23, 10.1.56 or 9.0.119, which fix the issue. |
| Detection of Error Condition Without Action vulnerability in Apache Tomcat when configuring CRLs for a FFM based connector.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.22, from 10.1.0-M7 through 10.1.55, from 9.0.83 through 9.0.118.
Users are recommended to upgrade to version 11.0.23, 10.1.56 or 9.0.119, which fixes the issue. |
