| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
USB: usb-storage: Prevent divide-by-0 error in isd200_ata_command
The isd200 sub-driver in usb-storage uses the HEADS and SECTORS values
in the ATA ID information to calculate cylinder and head values when
creating a CDB for READ or WRITE commands. The calculation involves
division and modulus operations, which will cause a crash if either of
these values is 0. While this never happens with a genuine device, it
could happen with a flawed or subversive emulation, as reported by the
syzbot fuzzer.
Protect against this possibility by refusing to bind to the device if
either the ATA_ID_HEADS or ATA_ID_SECTORS value in the device's ID
information is 0. This requires isd200_Initialization() to return a
negative error code when initialization fails; currently it always
returns 0 (even when there is an error). |
| In the Linux kernel, the following vulnerability has been resolved:
media: ccs: Avoid possible division by zero
Calculating maximum M for scaler configuration involves dividing by
MIN_X_OUTPUT_SIZE limit register's value. Albeit the value is presumably
non-zero, the driver was missing the check it in fact was. Fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check if modulo is 0 before dividing.
[How & Why]
If a value of 0 is read, then this will cause a divide-by-0 panic. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (occ) Fix division by zero in occ_show_power_1()
In occ_show_power_1() case 1, the accumulator is divided by
update_tag without checking for zero. If no samples have been
collected yet (e.g. during early boot when the sensor block is
included but hasn't been updated), update_tag is zero, causing
a kernel divide-by-zero crash.
The 2019 fix in commit 211186cae14d ("hwmon: (occ) Fix division by
zero issue") only addressed occ_get_powr_avg() used by
occ_show_power_2() and occ_show_power_a0(). This separate code
path in occ_show_power_1() was missed.
Fix this by reusing the existing occ_get_powr_avg() helper, which
already handles the zero-sample case and uses mul_u64_u32_div()
to multiply before dividing for better precision. Move the helper
above occ_show_power_1() so it is visible at the call site.
[groeck: Fix alignment problems reported by checkpatch] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/dsi: Don't do DSC horizontal timing adjustments in command mode
Stop adjusting the horizontal timing values based on the
compression ratio in command mode. Bspec seems to be telling
us to do this only in video mode, and this is also how the
Windows driver does things.
This should also fix a div-by-zero on some machines because
the adjusted htotal ends up being so small that we end up with
line_time_us==0 when trying to determine the vtotal value in
command mode.
Note that this doesn't actually make the display on the
Huawei Matebook E work, but at least the kernel no longer
explodes when the driver loads.
(cherry picked from commit 0b475e91ecc2313207196c6d7fd5c53e1a878525) |
| FlashMQ is a MQTT broker/server, designed for multi-CPU environments. Prior to version 1.26.1, a remote client with retained publish permission can crash the FlashMQ broker when both set_retained_message_defer_timeout and set_retained_message_defer_timeout_spread are configured to non-default values, resulting in denial of service. If anonymous retained publishing is allowed, no authentication is required; otherwise, the attacker needs the corresponding publish permission. This issue has been patched in version 1.26.1. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: fix potential zero beacon interval in beacon tracking
During fuzz testing, it was discovered that bss_conf->beacon_int
might be zero, which could result in a division by zero error in
subsequent calculations. Set a default value of 100 TU if the
interval is zero to ensure stability. |
| An unprivileged attacker can reliably trigger a crash of the dtrace process with a malicious ELF binary due to an integer Divide-by-Zero in Pbuild_file_symtab() |
| Firebird is an open-source relational database management system. In versions prior to 5.0.4, 4.0.7 and 3.0.14, the sdl_desc() function does not validate the length of a decoded SDL descriptor from a slice packet. A zero-length descriptor is later used to calculate the number of slice items, causing a division by zero. An unauthenticated attacker can exploit this by sending a crafted slice packet to crash the server. This issue has been fixed in versions 5.0.4, 4.0.7 and 3.0.14. |
| A client can trigger a divide by zero error leading to crash by sending a crafted DNSCrypt query. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: ets: fix divide by zero in the offload path
Offloading ETS requires computing each class' WRR weight: this is done by
averaging over the sums of quanta as 'q_sum' and 'q_psum'. Using unsigned
int, the same integer size as the individual DRR quanta, can overflow and
even cause division by zero, like it happened in the following splat:
Oops: divide error: 0000 [#1] SMP PTI
CPU: 13 UID: 0 PID: 487 Comm: tc Tainted: G E 6.19.0-virtme #45 PREEMPT(full)
Tainted: [E]=UNSIGNED_MODULE
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
RIP: 0010:ets_offload_change+0x11f/0x290 [sch_ets]
Code: e4 45 31 ff eb 03 41 89 c7 41 89 cb 89 ce 83 f9 0f 0f 87 b7 00 00 00 45 8b 08 31 c0 45 01 cc 45 85 c9 74 09 41 6b c4 64 31 d2 <41> f7 f2 89 c2 44 29 fa 45 89 df 41 83 fb 0f 0f 87 c7 00 00 00 44
RSP: 0018:ffffd0a180d77588 EFLAGS: 00010246
RAX: 00000000ffffff38 RBX: ffff8d3d482ca000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffd0a180d77660
RBP: ffffd0a180d77690 R08: ffff8d3d482ca2d8 R09: 00000000fffffffe
R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffffe
R13: ffff8d3d472f2000 R14: 0000000000000003 R15: 0000000000000000
FS: 00007f440b6c2740(0000) GS:ffff8d3dc9803000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000003cdd2000 CR3: 0000000007b58002 CR4: 0000000000172ef0
Call Trace:
<TASK>
ets_qdisc_change+0x870/0xf40 [sch_ets]
qdisc_create+0x12b/0x540
tc_modify_qdisc+0x6d7/0xbd0
rtnetlink_rcv_msg+0x168/0x6b0
netlink_rcv_skb+0x5c/0x110
netlink_unicast+0x1d6/0x2b0
netlink_sendmsg+0x22e/0x470
____sys_sendmsg+0x38a/0x3c0
___sys_sendmsg+0x99/0xe0
__sys_sendmsg+0x8a/0xf0
do_syscall_64+0x111/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f440b81c77e
Code: 4d 89 d8 e8 d4 bc 00 00 4c 8b 5d f8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 11 c9 c3 0f 1f 80 00 00 00 00 48 8b 45 10 0f 05 <c9> c3 83 e2 39 83 fa 08 75 e7 e8 13 ff ff ff 0f 1f 00 f3 0f 1e fa
RSP: 002b:00007fff951e4c10 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000481820 RCX: 00007f440b81c77e
RDX: 0000000000000000 RSI: 00007fff951e4cd0 RDI: 0000000000000003
RBP: 00007fff951e4c20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00007fff951f4fa8
R13: 00000000699ddede R14: 00007f440bb01000 R15: 0000000000486980
</TASK>
Modules linked in: sch_ets(E) netdevsim(E)
---[ end trace 0000000000000000 ]---
RIP: 0010:ets_offload_change+0x11f/0x290 [sch_ets]
Code: e4 45 31 ff eb 03 41 89 c7 41 89 cb 89 ce 83 f9 0f 0f 87 b7 00 00 00 45 8b 08 31 c0 45 01 cc 45 85 c9 74 09 41 6b c4 64 31 d2 <41> f7 f2 89 c2 44 29 fa 45 89 df 41 83 fb 0f 0f 87 c7 00 00 00 44
RSP: 0018:ffffd0a180d77588 EFLAGS: 00010246
RAX: 00000000ffffff38 RBX: ffff8d3d482ca000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffd0a180d77660
RBP: ffffd0a180d77690 R08: ffff8d3d482ca2d8 R09: 00000000fffffffe
R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffffe
R13: ffff8d3d472f2000 R14: 0000000000000003 R15: 0000000000000000
FS: 00007f440b6c2740(0000) GS:ffff8d3dc9803000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000003cdd2000 CR3: 0000000007b58002 CR4: 0000000000172ef0
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x30000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception ]---
Fix this using 64-bit integers for 'q_sum' and 'q_psum'. |
| The TFTP implementation in IBM Tivoli Provisioning Manager for OS Deployment 5.1 before Fix Pack 3 allows remote attackers to cause a denial of service (rembo.exe crash and multiple service outage) via a read (RRQ) request with an invalid blksize (blocksize), which triggers a divide-by-zero error. |
| Media Player Classic 6.4.9.0 allows user-assisted remote attackers to cause a denial of service (web browser crash) via an "empty" .MPA file, which triggers a divide-by-zero error. |
| Grisoft AVG Anti-Virus before 7.1.407 allows remote attackers to cause a denial of service (crash) via a crafted DOC file that triggers a divide-by-zero error. NOTE: some of these details are obtained from third party information. |
| Microsoft Windows Graphics Device Interface (GDI+, GdiPlus.dll) allows context-dependent attackers to cause a denial of service (crash) via an ICO file with an InfoHeader containing a Height of zero, which triggers a divide-by-zero error. |
| agent/snmp_agent.c in snmpd in net-snmp 5.0.9 in Red Hat Enterprise Linux (RHEL) 3 allows remote attackers to cause a denial of service (daemon crash) via a crafted SNMP GETBULK request that triggers a divide-by-zero error. NOTE: this vulnerability exists because of an incorrect fix for CVE-2008-4309. |
| iccDEV provides a set of libraries and tools for working with ICC color management profiles. Prior to version 2.3.1.6, a crafted TIFF input can trigger Undefined Behavior (UB) due to division by zero in the TIFF handling code paths used by iccTiffDump. This issue has been patched in version 2.3.1.6. |
| iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of ICC color management profiles. Prior to version 2.3.1.2, iccDEV is vulnerable to division by zero in the TIFF Image Reader. This issue has been patched in version 2.3.1.2. |
| Out-of-bounds Write, Divide By Zero, NULL Pointer Dereference, Use of Uninitialized Resource, Out-of-bounds Read, Reachable Assertion vulnerability in cadaver turso3d.This issue affects . |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a logic error in YUV sampling factor validation allows an invalid sampling factor to bypass checks and trigger a division-by-zero during image loading, resulting in a reliable denial-of-service. Versions 7.1.2-15 and 6.9.13-40 contain a patch. |
