| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper initialization in the Linux kernel mode driver for some Intel(R) Ethernet Network Controllers and Adapters before version 28.3 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Improper resource management in firmware of some Solidigm DC Products may allow an attacker with local or physical access to gain un-authorized access to a locked Storage Device or create a Denial of Service. |
| Improper initialization in firmware for some Intel(R) CSME may allow a privileged user to potentially enable information disclosure via local access. |
| Improper initialization in the UEFI firmware for the Intel(R) Server D50DNP and M50FCP boards may allow a privileged user to potentially enable information disclosure via local access. |
| The NASA’s Interplanetary Overlay Network (ION) is an implementation of Delay/Disruption Tolerant Networking (DTN). A vulnerability exists in the version ION-DTN BPv7 implementation version 4.1.3 when receiving a bundle with an improper reference to the imc scheme with valid Service-Specific Part (SSP) in their Previous Node Block. The vulnerability can cause ION to become unresponsive. This vulnerability is fixed in 4.1.3s. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: Ignore frags from uninitialized peer in dp.
When max virtual ap interfaces are configured in all the bands with
ACS and hostapd restart is done every 60s, a crash is observed at
random times.
In this certain scenario, a fragmented packet is received for
self peer, for which rx_tid and rx_frags are not initialized in
datapath. While handling this fragment, crash is observed as the
rx_frag list is uninitialised and when we walk in
ath11k_dp_rx_h_sort_frags, skb null leads to exception.
To address this, before processing received fragments we check
dp_setup_done flag is set to ensure that peer has completed its
dp peer setup for fragment queue, else ignore processing the
fragments.
Call trace:
ath11k_dp_process_rx_err+0x550/0x1084 [ath11k]
ath11k_dp_service_srng+0x70/0x370 [ath11k]
0xffffffc009693a04
__napi_poll+0x30/0xa4
net_rx_action+0x118/0x270
__do_softirq+0x10c/0x244
irq_exit+0x64/0xb4
__handle_domain_irq+0x88/0xac
gic_handle_irq+0x74/0xbc
el1_irq+0xf0/0x1c0
arch_cpu_idle+0x10/0x18
do_idle+0x104/0x248
cpu_startup_entry+0x20/0x64
rest_init+0xd0/0xdc
arch_call_rest_init+0xc/0x14
start_kernel+0x480/0x4b8
Code: f9400281 f94066a2 91405021 b94a0023 (f9406401)
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
| Improper initialization in the firmware for some Intel(R) AMT and Intel(R) Standard Manageability may allow a privileged user to potentially enable information disclosure via local access. |
| A potential improper initialization vulnerability was reported in the BIOS of some ThinkPads that could allow a local privileged user to modify data and execute arbitrary code. |
| The vmnc decoder in the gstreamer does not initialize the render canvas, which allows remote attackers to obtain sensitive information as demonstrated by thumbnailing a simple 1 frame vmnc movie that does not draw to the allocated render canvas. |
| An issue was discovered in LBS in Samsung Mobile Processor Exynos 2200. There was no check for memory initialization within DL NAS Transport messages. |
| A vulnerability was found in PyTorch 2.6.0+cu124. It has been rated as problematic. Affected by this issue is the function nnq_Sigmoid of the component Quantized Sigmoid Module. The manipulation of the argument scale/zero_point leads to improper initialization. The attack needs to be approached locally. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. |
| Failure to validate inputs in SMM may allow an attacker to create a mishandled error leaving the DRTM UApp in a partially initialized state potentially resulting in loss of memory integrity. |
| A vulnerability was found in Open5GS up to 2.7.5. Affected by this vulnerability is the function ogs_pfcp_handle_create_pdr in the library lib/pfcp/handler.c of the component PFCP. The manipulation results in improper initialization. It is possible to launch the attack remotely. This attack is characterized by high complexity. The exploitation appears to be difficult. The exploit has been made public and could be used. The patch is identified as 773117aa5472af26fc9f80e608d3386504c3bdb7. It is best practice to apply a patch to resolve this issue. |
| <p>An information disclosure vulnerability exists when the Windows kernel improperly initializes objects in memory.</p>
<p>To exploit this vulnerability, an authenticated attacker could run a specially crafted application. An attacker who successfully exploited this vulnerability could obtain information to further compromise the user’s system.</p>
<p>The update addresses the vulnerability by correcting how the Windows kernel initializes objects in memory.</p> |
| <p>An information disclosure vulnerability exists when the Windows kernel improperly initializes objects in memory.</p>
<p>To exploit this vulnerability, an authenticated attacker could run a specially crafted application. An attacker who successfully exploited this vulnerability could obtain information to further compromise the user’s system.</p>
<p>The update addresses the vulnerability by correcting how the Windows kernel initializes objects in memory.</p> |
| In the Linux kernel, the following vulnerability has been resolved:
x86/CPU/AMD: Clear virtualized VMLOAD/VMSAVE on Zen4 client
A number of Zen4 client SoCs advertise the ability to use virtualized
VMLOAD/VMSAVE, but using these instructions is reported to be a cause
of a random host reboot.
These instructions aren't intended to be advertised on Zen4 client
so clear the capability. |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: fix a possible DMA corruption
ARCH_DMA_MINALIGN was defined as 16 - this is too small - it may be
possible that two unrelated 16-byte allocations share a cache line. If
one of these allocations is written using DMA and the other is written
using cached write, the value that was written with DMA may be
corrupted.
This commit changes ARCH_DMA_MINALIGN to be 128 on PA20 and 32 on PA1.1 -
that's the largest possible cache line size.
As different parisc microarchitectures have different cache line size, we
define arch_slab_minalign(), cache_line_size() and
dma_get_cache_alignment() so that the kernel may tune slab cache
parameters dynamically, based on the detected cache line size. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/jfs: Add validity check for db_maxag and db_agpref
Both db_maxag and db_agpref are used as the index of the
db_agfree array, but there is currently no validity check for
db_maxag and db_agpref, which can lead to errors.
The following is related bug reported by Syzbot:
UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:639:20
index 7936 is out of range for type 'atomic_t[128]'
Add checking that the values of db_maxag and db_agpref are valid
indexes for the db_agfree array. |
| Boundary Community Edition and Boundary Enterprise (“Boundary”) incorrectly handle HTTP requests during the initialization of the Boundary controller, which may cause the Boundary server to terminate prematurely. Boundary is only vulnerable to this flaw during the initialization of the Boundary controller, which on average is measured in milliseconds during the Boundary startup process.
This vulnerability, CVE-2024-12289, is fixed in Boundary Community Edition and Boundary Enterprise 0.16.4, 0.17.3, 0.18.2. |
| In the Linux kernel, the following vulnerability has been resolved:
net:sfc: fix non-freed irq in legacy irq mode
SFC driver can be configured via modparam to work using MSI-X, MSI or
legacy IRQ interrupts. In the last one, the interrupt was not properly
released on module remove.
It was not freed because the flag irqs_hooked was not set during
initialization in the case of using legacy IRQ.
Example of (trimmed) trace during module remove without this fix:
remove_proc_entry: removing non-empty directory 'irq/125', leaking at least '0000:3b:00.1'
WARNING: CPU: 39 PID: 3658 at fs/proc/generic.c:715 remove_proc_entry+0x15c/0x170
...trimmed...
Call Trace:
unregister_irq_proc+0xe3/0x100
free_desc+0x29/0x70
irq_free_descs+0x47/0x70
mp_unmap_irq+0x58/0x60
acpi_unregister_gsi_ioapic+0x2a/0x40
acpi_pci_irq_disable+0x78/0xb0
pci_disable_device+0xd1/0x100
efx_pci_remove+0xa1/0x1e0 [sfc]
pci_device_remove+0x38/0xa0
__device_release_driver+0x177/0x230
driver_detach+0xcb/0x110
bus_remove_driver+0x58/0xd0
pci_unregister_driver+0x2a/0xb0
efx_exit_module+0x24/0xf40 [sfc]
__do_sys_delete_module.constprop.0+0x171/0x280
? exit_to_user_mode_prepare+0x83/0x1d0
do_syscall_64+0x3d/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f9f9385800b
...trimmed... |
