| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| gitoxide before 0.38.2 fails to validate carriage return characters in URL values passed to credential helpers. Attackers can supply URLs containing bare carriage returns to inject additional helper protocol fields and cause credential helpers to return credentials for attacker-specified hosts instead of the requested URL. |
| A heap-based buffer overflow vulnerability exists in openNDS before 11.0.0 that allows an unauthenticated attacker on the captive portal network to crash the openNDS daemon (denial of service) and potentially achieve remote code execution. This is in http_microhttpd.c. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - bound the F54 report size to the allocated buffer
rmi_f54_work() reads a diagnostics report from the device into
f54->report_data, sizing the transfer with rmi_f54_get_report_size():
report_size = rmi_f54_get_report_size(f54);
...
for (i = 0; i < report_size; i += F54_REPORT_DATA_SIZE) {
int size = min(F54_REPORT_DATA_SIZE, report_size - i);
...
rmi_read_block(.., f54->report_data + i, size);
}
report_data is allocated once at probe from F54's own electrode counts
(array3_size(f54->num_tx_electrodes, f54->num_rx_electrodes, sizeof(u16))),
but rmi_f54_get_report_size() computes the size from
drv_data->num_*_electrodes when those are set, i.e. from the F55
function's electrode counts. Both counts come straight from device
queries (F54 and F55 each report up to 255 electrodes) and nothing
constrains the F55 counts to the F54 ones.
A malicious or malfunctioning RMI4 device that reports larger F55
electrode counts than its F54 counts makes report_size exceed the
allocation, so the read loop writes past report_data (and the V4L2
dequeue memcpy() then reads past it). On conforming hardware the F55
configured electrodes are a subset of the F54 physical electrodes, so
report_size never exceeds the buffer and well-behaved devices are
unaffected.
Record the allocation size and reject a report that does not fit,
mirroring the existing zero-size check. |
| An out-of-bounds read vulnerability in the WatchGuard Fireware OS iked process allows a remote unauthenticated attacker to create a Denial of Service (DoS) condition in VPN processing by sending specially crafted network traffic. |
| A heap-based buffer overflow vulnerability in Fireware OS's iked process allows an authenticated administrator to crash the IKE daemon (iked), resulting in a denial of service, by saving a specially crafted configuration. |
| Substance3D - Sampler is affected by a Stack-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| In Zimbra Collaboration (ZCS) before 10.1.17, weak cryptographic key generation vulnerability exists in the OnlyOffice integration. The zimbraDocumentEditingJwtSecret is generated using an insecure random number generator, resulting in insufficient entropy. An attacker who obtains a JWT signed with the generated secret may be able to recover the JWT signing secret through offline brute-force, potentially enabling JWT forgery. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: account for fraggap on the paged allocation path
In __ip6_append_data(), when the paged-allocation branch is taken
(MSG_MORE / NETIF_F_SG / large fraglen), alloclen and pagedlen are
computed as
alloclen = fragheaderlen + transhdrlen;
pagedlen = datalen - transhdrlen;
datalen already includes fraggap (datalen = length + fraggap). When
fraggap is non-zero, this is not the first skb and transhdrlen is zero.
The fraggap bytes carried over from the previous skb are copied just past
the fragment headers in the new skb's linear area. The linear area is
therefore undersized by fraggap bytes while pagedlen is overstated by the
same amount, and the copy writes past skb->end into the trailing
skb_shared_info.
An unprivileged user can trigger this via a UDPv6 socket using
MSG_MORE together with MSG_SPLICE_PAGES.
The bad accounting was introduced by commit 773ba4fe9104 ("ipv6:
avoid partial copy for zc"). Before commit ce650a166335 ("udp6: Fix
__ip6_append_data()'s handling of MSG_SPLICE_PAGES"), the negative
copy value caused -EINVAL to be returned. That later commit allowed
MSG_SPLICE_PAGES to proceed in this case, making the corruption
triggerable.
The non-paged branch sets alloclen to fraglen, which already accounts
for fraggap because datalen does. Bring the paged branch in line by
adding fraggap to alloclen and subtracting it from pagedlen.
After this adjustment, copy no longer collapses to -fraggap on the
paged path, so remove the stale comment describing that old arithmetic.
Since a negative copy is no longer expected for a valid MSG_SPLICE_PAGES
case, remove the MSG_SPLICE_PAGES exception from the negative copy check. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - add response length checks
The driver processes response data from device buffers without verifying
that the device actually sent enough data. This can lead to
out-of-bounds reads or processing stale data.
Add checks for the expected response length before accessing the
buffers. |
| gitoxide gix-packetline versions before 0.21.5 contain a panic vulnerability in the TextRef implementation that occurs when processing side-band packet lines with empty payloads. A malicious Git server can send a crafted side-band packet to trigger an index out of bounds panic, aborting the client process during fetch operations without authentication. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: fix OOB read in decode_watchers() via missing bounds check
ceph_start_decoding() validates that struct_len bytes remain in the
buffer after the encoding header, but accepts struct_len=0 as valid:
ceph_decode_need(p, end, 0, bad) always passes. When a malicious or
compromised OSD sends an obj_list_watch_response_t reply with
struct_len=0, ceph_start_decoding() returns success with p == end,
leaving zero bytes guaranteed for subsequent reads.
The immediately following ceph_decode_32(p) in decode_watchers() has
no preceding bounds check. With p == end this is a 4-byte read past
the validated buffer boundary. The garbage value is then passed
directly to kzalloc_objs() as the watcher count.
The sibling function decode_watcher() already uses the safe variants
(ceph_decode_copy_safe, ceph_decode_64_safe, ceph_decode_skip_32)
after its own ceph_start_decoding() call. decode_watchers() is the
only site that uses the bare variant, confirming an oversight.
Fix by replacing ceph_decode_32(p) with ceph_decode_32_safe(p, end,
*num_watchers, bad), consistent with the established pattern.
Attacker model: a malicious or compromised OSD in a multi-tenant Ceph
deployment (e.g. cloud) can trigger this against any kernel client
that calls CEPH_OSD_OP_LIST_WATCHERS, without any further privileges
beyond OSD session establishment.
[ idryomov: trim changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Avoid using invalid osd indices from primary_temp
A corrupted osdmap received from a Ceph monitor or OSD may contain osd
indices in its pg_temp, primary_temp, pg_upmap, and pg_upmap_items parts
that don't exist, i.e., that are greater than max_osd or smaller than
CEPH_HOMELESS_OSD (-1). These indices are used to create the up and
acting set in ceph_pg_to_up_acting_osds(), called from calc_target().
While most of these osd indices are checked, the one from primary_temp
is not. Subsequently, this may lead to calc_target() returning this
(potentially invalid) index as target osd for a (linger) request.
Because the osd_state, osd_weight, and osd_addr arrays only contain
max_osd entries (with indices 0 to max_osd -1), this leads to
out-of-bounds accesses when trying to read values from these arrays.
This patch fixes the issue by adding a check to get_temp_osds(), so that
only valid osd indices from primary_temp are used, and it falls back to
using the primary from pg_temp or the up set if it is invalid.
[ idryomov: changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
openrisc: signal: do not restore privileged SR bits on sigreturn
restore_sigcontext() copies the whole supervision register (SR) from the
signal frame and only clears SPR_SR_SM before the value is reloaded into
the hardware SR (through ESR and l.rfe) on the return to user space. All
other SR bits are left under user control.
An unprivileged task can thus return from a signal handler through a
crafted sigframe that clears SPR_SR_DME. With the data MMU disabled the
CPU performs no translation or protection on data accesses, so the task
gains read and write access to arbitrary physical memory, a local
privilege escalation. SPR_SR_IME, SPR_SR_SUMRA, SPR_SR_LEE, SPR_SR_EPH
and the cache-enable bits are exposed the same way. The ptrace GPR regset
already refuses any change to SR for exactly this reason.
Restore only the arithmetic flag bits (F, CY, OV) from the signal frame
and take every privileged control bit from the SR the kernel saved on
signal entry.
Verified with qemu-system-or1k -M or1k-sim: before this change an
unprivileged PoC clears SPR_SR_DME in rt_sigreturn and writes a marker to
physical address 0x03000000 (beyond the kernel's mem=32M); afterwards the
same PoC receives SIGSEGV and physical memory is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvlan: inherit needed_headroom and needed_tailroom from phy_dev
ipvlan devices inherit hard_header_len from phy_dev during ipvlan_init(),
but leave needed_headroom and needed_tailroom set to 0.
When the underlying phy_dev (or stacked lower device) requires extra headroom
or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or
veth with rx headroom), upper layers calculating packet headroom and tailroom
fail to reserve sufficient space.
This can result in reallocation overhead, skb headroom underflows, or KASAN
slab-use-after-free crashes when dev_hard_header() / ipvlan_hard_header()
prepends header data or when lower devices append tailroom.
Fix this by:
1. Inheriting needed_headroom and needed_tailroom from phy_dev in ipvlan_init().
2. Propagating needed_headroom and needed_tailroom updates to attached ipvlans
in ipvlan_device_event() when receiving NETDEV_FEAT_CHANGE events. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: lib: Fix ZBB strnlen reading past count boundary
The ZBB-optimized strnlen loop loads one word ahead before checking the
aligned boundary:
REG_L t1, SZREG(t0) // load next word
addi t0, t0, SZREG // advance
orc.b t1, t1
bgeu t0, t4, 4f // boundary check AFTER load
where t4 = (s + count) & -SZREG. When s is aligned and count is a
multiple of SZREG, t4 equals s + count and the loop loads a full word
starting at exactly s + count. If s + count falls on a page boundary
with the next page unmapped, this faults.
Fix by computing the aligned boundary from the last valid byte
(s + count - 1) instead of s + count. This makes the loop stop at the
word containing the last valid byte rather than potentially loading the
word after it. The count == 0 case is already handled by the beqz
early exit.
Also add a pre-loop guard (bgeu t0, t4) for the case where all valid
bytes fit within the first word. With the adjusted boundary, t4 can
equal t0, and entering the loop with stale register state from the
first-word processing would produce incorrect results.
The final minu clamp ensures the result is still correct when the last
loaded word extends past s + count - 1 within the same aligned word. |
| Substance3D - Sampler is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Sampler is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Illustrator is affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| After Effects versions 26.0, 25.6.4 and earlier are affected by an Integer Overflow or Wraparound vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| After Effects versions 26.0, 25.6.4 and earlier are affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
