| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The certificate and private key used for providing transport layer security for connections to the web interface (TCP port 443) is hard-coded in the firmware and are shipped with the update files. An attacker can use the private key to perform man-in-the-middle attacks against users of the admin interface. The files are located in /etc/ssl (e.g. salia.local.crt, salia.local.key and salia.local.pem). There is no option to upload/configure custom TLS certificates. |
| A vulnerability exists in Algo Edge up to 2.1.1 - a previously used (legacy) component of navify® Algorithm Suite. The vulnerability impacts the authentication mechanism of this component and could allow an attacker with adjacent access to the laboratory network and the Algo Edge system to craft valid authentication tokens and access the component. Other components of navify® Algorithm Suite are not affected. |
| Broken or Risky Cryptographic Algorithm, Use of Password Hash
With Insufficient Computational Effort, Use of Weak Hash, Use of a
One-Way Hash with a Predictable Salt vulnerabilities in Beta80 "Life 1st Identity Manager"
enable an attacker with access to
password hashes
to bruteforce user passwords or find a collision to ultimately while attempting to gain access to a target application that uses "Life 1st Identity Manager" as a service for authentication.
This issue affects Life 1st: 1.5.2.14234. |
| During the initial setup of the device the user connects to an access
point broadcast by the Sight Bulb Pro. During the negotiation, AES
Encryption keys are passed in cleartext. If captured, an attacker may be
able to decrypt communications between the management app and the Sight
Bulb Pro which may include sensitive information such as network
credentials. |
| A low privileged local attacker can abuse the affected service by using a hardcoded cryptographic key. |
| VyOS 1.3 through 1.5 (fixed in 1.4.2) or any Debian-based system using dropbear in combination with live-build has the same Dropbear private host keys across different installations. Thus, an attacker can conduct active man-in-the-middle attacks against SSH connections if Dropbear is enabled as the SSH daemon. I n VyOS, this is not the default configuration for the system SSH daemon, but is for the console service. To mitigate this, one can run "rm -f /etc/dropbear/*key*" and/or "rm -f /etc/dropbear-initramfs/*key*" and then dropbearkey -t rsa -s 4096 -f /etc/dropbear_rsa_host_key and reload the service or reboot the system before using Dropbear as the SSH daemon (this clears out all keys mistakenly built into the release image) or update to the latest version of VyOS 1.4 or 1.5. Note that this vulnerability is not unique to VyOS and may appear in any Debian-based Linux distribution that uses Dropbear in combination with live-build, which has a safeguard against this behavior in OpenSSH but no equivalent one for Dropbear. |
| Cryptographic Flaw in PDFium in Google Chrome prior to 147.0.7727.55 allowed an attacker to read potentially sensitive information from encrypted PDFs via a brute-force attack. (Chromium security severity: Medium) |
| Configured cipher preference order not preserved vulnerability in Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.16 through 11.0.18, from 10.1.51 through 10.1.52, from 9.0.114 through 9.0.115.
Users are recommended to upgrade to version 11.0.20, 10.1.53 or 9.0.116, which fix the issue. |
| A Key Exchange without Entity Authentication vulnerability in the SSH implementation of Juniper Networks Apstra allows a unauthenticated, MITM
attacker to impersonate managed devices.
Due to insufficient SSH host key validation an attacker can perform a machine-in-the-middle attack on the SSH connections from Apstra to managed devices, enabling an attacker to impersonate a managed device and capture user credentials.
This issue affects all versions of Apstra before 6.1.1. |
| The 802.11 standard that underpins Wi-Fi Protected Access (WPA, WPA2, and WPA3) and Wired Equivalent Privacy (WEP) doesn't require that the A-MSDU flag in the plaintext QoS header field is authenticated. Against devices that support receiving non-SSP A-MSDU frames (which is mandatory as part of 802.11n), an adversary can abuse this to inject arbitrary network packets. |
| Cocos AI is a confidential computing system for AI. The current implementation of attested TLS (aTLS) in CoCoS is vulnerable to a relay attack affecting all versions from v0.4.0 through v0.8.2. This vulnerability is present in both the AMD SEV-SNP and Intel TDX deployment targets supported by CoCoS. In the affected design, an attacker may be able to extract the ephemeral TLS private key used during the intra-handshake attestation. Because the attestation evidence is bound to the ephemeral key but not to the TLS channel, possession of that key is sufficient to relay or divert the attested TLS session. A client will accept the connection under false assumptions about the endpoint it is communicating with — the attestation report cannot distinguish the genuine attested service from the attacker's relay. This undermines the intended authentication guarantees of attested TLS. A successful attack may allow an attacker to impersonate an attested CoCoS service and access data or operations that the client intended to send only to the genuine attested endpoint. Exploitation requires the attacker to first extract the ephemeral TLS private key, which is possible through physical access to the server hardware, transient execution attacks, or side-channel attacks. Note that the aTLS implementation was fully redesigned in v0.7.0, but the redesign does not address this vulnerability. The relay attack weakness is architectural and affects all releases in the v0.4.0–v0.8.2 range. This vulnerability class was formally analyzed and demonstrated across multiple attested TLS implementations, including CoCoS, by researchers whose findings were disclosed to the IETF TLS Working Group. Formal verification was conducted using ProVerif. As of time of publication, there is no patch available. No complete workaround is available. The following hardening measures reduce but do not eliminate the risk: Keep TEE firmware and microcode up to date to reduce the key-extraction surface; define strict attestation policies that validate all available report fields, including firmware versions, TCB levels, and platform configuration registers; and/or enable mutual aTLS with CA-signed certificates where deployment architecture permits. |
| OrangeHRM is a comprehensive human resource management (HRM) system. From 5.0 to 5.8, OrangeHRM Open Source encrypts certain sensitive fields with AES in ECB mode, which preserves block-aligned plaintext patterns in ciphertext and enables pattern disclosure against stored data. This vulnerability is fixed in 5.8.1. |
| SimpleJWT is a simple JSON web token library written in PHP. Prior to version 1.1.1, an unauthenticated attacker can perform a Denial of Service via JWE header tampering when PBES2 algorithms are used. Applications that call JWE::decrypt() on attacker-controlled JWEs using PBES2 algorithms are affected. This issue has been patched in version 1.1.1. |
| The Semtech LR11xx LoRa transceivers implement secure boot functionality using digital signatures to authenticate firmware. However, the implementation uses a non-standard cryptographic hashing algorithm that is vulnerable to second preimage attacks. An attacker with physical access to the device can exploit this weakness to generate a malicious firmware image with a hash collision, bypassing the secure boot verification mechanism and installing arbitrary unauthorized firmware on the device. |
| The Video Conferencing with Zoom plugin for WordPress is vulnerable to Sensitive Information Exposure due to hardcoded encryption key on the 'vczapi_encrypt_decrypt' function in versions up to, and including, 4.2.1. This makes it possible for unauthenticated attackers to decrypt and view the meeting id and password. |
| The EmbedPress plugin for WordPress is vulnerable to Sensitive Information Exposure due to hardcoded encryption key on the 'lock_content_form_handler' and 'display_password_form' function in versions up to, and including, 3.7.3. This makes it possible for unauthenticated attackers to decrypt and view the password protected content. |
| The Appointment Hour Booking plugin for WordPress is vulnerable to CAPTCHA bypass in versions up to, and including, 1.3.72. This is due to the use of insufficiently strong hashing algorithm on the CAPTCHA secret that is also displayed to the user via a cookie. |
| The ProfileGrid plugin for WordPress is vulnerable to unauthorized decryption of private information in versions up to, and including, 5.5.0. This is due to the passphrase and iv being hardcoded in the 'pm_encrypt_decrypt_pass' function and used across all sites running the plugin. This makes it possible for authenticated attackers, with administrator-level permissions or above to decrypt and view users' passwords. If combined with another vulnerability, this can potentially grant lower-privileged users access to users' passwords. |
| The Civi - Job Board & Freelance Marketplace WordPress Theme plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 2.1.4 via hard-coded credentials. This makes it possible for unauthenticated attackers to extract sensitive data including LinkedIn client and secret keys. |
| A vulnerability has been found in Meesho Online Shopping App up to 27.3 on Android. Affected is an unknown function of the file /api/endpoint of the component com.meesho.supply. Such manipulation leads to risky cryptographic algorithm. The attack may be performed from remote. The attack requires a high level of complexity. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. |
