| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom: qmp-usb: Fix possible NULL-deref on early runtime suspend
There is a small window where the runtime suspend callback may run
after pm_runtime_enable() and before pm_runtime_forbid(). In this
case, a crash occurs because runtime suspend/resume dereferences
qmp->phy pointer, which is not yet initialized:
`if (!qmp->phy->init_count) {`
This can also happen if user re-enables runtime-pm via the sysfs
attribute before qmp phy is initialized.
Similarly to other qcom phy drivers, introduce a qmp->phy_initialized
variable that can be used to avoid relying on the possibly uninitialized
phy pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom: qmp-usb-legacy: Fix possible NULL-deref on early runtime suspend
There is a small window where the runtime suspend callback may run
after pm_runtime_enable() and before pm_runtime_forbid(). In this
case, a crash occurs because runtime suspend/resume dereferences
qmp->phy pointer, which is not yet initialized:
`if (!qmp->phy->init_count) {`
This can also happen if user re-enables runtime-pm via the sysfs
attribute before qmp phy is initialized.
Similarly to other qcom phy drivers, introduce a qmp->phy_initialized
variable that can be used to avoid relying on the possibly uninitialized
phy pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: free vif links after clearing wcid entries on full reset
mt7996_mac_reset_vif_iter() queues non-default vif links for kfree_rcu
while dev->wcid[] still holds pointers to the wcid embedded in each
freed link; mt76_reset_device() then dereferences those entries and
runs mt76_wcid_cleanup() on them. If a grace period elapses in between,
the cleanup operates on freed memory.
Run mt76_reset_device() first, so the wcid entries are cleaned up and
cleared while the links are still valid. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: unlink TWT flow if the MCU rejects the agreement
The flow is added to dev->twt_list before sending the agreement to the
firmware, but the error path leaves it linked while flowid_mask is
never set. The flow slot can then be reused and memset while still on
the list, corrupting twt_list, and station removal leaves a dangling
entry behind that mt7915_mac_twt_sched_list_add() later walks. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, x86: Fix trampoline stack size for 128-bit arguments
btf_distill_func_proto() accepts a function argument up to 16 bytes, so a
128-bit scalar such as __int128 reaches the x86 trampoline with
arg_size == 16. But the current implementation assumes an __int128
argument only needs one register, so the register save area is
under-allocated and save_args() overwrites adjacent stack slots.
Compute the register count from arg_size for all arguments to fix it. |
| Improper authorization in Azure Database for PostgreSQL allows an authorized attacker to elevate privileges over a network. |
| Authentication bypass by spoofing in Microsoft Fabric allows an unauthorized attacker to elevate privileges over a network. |
| Insufficient verification of data authenticity in Azure Billing allows an unauthorized attacker to elevate privileges over a network. |
| Grafana OSS and Grafana Enterprise did not safely resolve symbolic links when
extracting plugin archives. A crafted plugin archive can chain relative symbolic link
entries to escape the plugin installation directory, writing arbitrary files and an
executable backend binary outside that directory. The dropped executable runs with the
privileges of the Grafana server process, resulting in remote code execution.
Plugin archives are extracted before their signature is verified, so a valid plugin
signature does not prevent the write. An operator can therefore be affected by
installing a plugin that appears legitimate, as well as by installing a plugin from an
arbitrary archive using grafana-cli, the GF_INSTALL_PLUGINS environment variable, or
preinstall configuration.
Grafana Enterprise is affected because it includes the same plugin extraction code as
Grafana OSS. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Remove redundant VPD flash read in sysfs read path
qla2x00_sysfs_read_vpd() called ha->isp_ops->read_optrom() a second time
after releasing optrom_mutex. The repeated read is redundant and, unlike
the first, runs without optrom_mutex held, exposing flash access to
concurrent optrom operations. Drop the duplicate call. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: renesas: rcar-gen2: Fix double of_node_put on phy creation failure
for_each_child_of_node_scoped() releases the node reference on scope
exit, so the explicit of_node_put(np) in the devm_phy_create() error
path drops it twice.
Drop the redundant of_node_put() and let the scoped cleanup handle it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Resize MST HDCP per-connector arrays to 32
AMDGPU_DM_MAX_DISPLAY_INDEX is 31. It suggest a maximum number of
32 connectors. But the way it's used is like MAX_DISPLAY_COUNT.
Hence we're off by one with DRM core, which supports a max of 32
connectors.
Rename AMDGPU_DM_MAX_DISPLAY_INDEX to AMDGPU_DM_MAX_DISPLAY_COUNT
to match its actual use, and increase the size to 32 to match the
originally intended size. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: imx6q: fix devres accumulation across driver rebind
imx6_soc_volt is allocated with devm_kcalloc(cpu_dev, ...), where cpu_dev
is the CPU device from get_cpu_device(0). That device is never unbound, so
its devres list is never released, and imx6q_cpufreq_remove() does not free
the array either. Every probe therefore adds an allocation that stays for
the lifetime of the system.
Allocate against the platform device instead. Its devres is released when
the driver is unbound, which is exactly the lifetime the array wants:
imx6q_set_target() reads it, and nothing may reach that after
cpufreq_unregister_driver().
That makes the array actually go away on unbind, so also clear the
file-scope pointer in remove and on the failed-probe path, rather than
leave it pointing at memory devres is about to release.
Tested by rebinding the driver on qemu's mcimx6ul-evk. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9484/1: enable interrupts when unhandled user faults are triggered
PREEMPT_RT requires interrupts to be enabled when sending signals.
When do_DataAbort()/do_PrefetchAbort() triggers unhandled user faults,
that is `inf->fn()` return a non-zero value, and the interrupts are not
enabled within the hook function, force_sig_fault() will be called
with interrupts disabled.
This can be triggered by user programs executing the bkpt instruction,
with kernel config CONFIG_PERF_EVENTS=n.
Enable interrupts in do_DataAbort()/do_PrefetchAbort() when unhandled
user faults are triggered to fix the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Compare iterator types during state pruning
An iterator stack slot can be MEM_RCU or PTR_UNTRUSTED. These states
must not be equal, or the verifier can prune an unsafe path.
Compare the pointer type for STACK_ITER slots. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cxgb4: Free debugfs on registration failure
c4iw_alloc() creates the per-device debugfs tree (dev->debugfs_root via
setup_debugfs()), but it is removed only in c4iw_remove(), not in
c4iw_dealloc(). When RDMA device registration fails, the registration
worker's err_dealloc_ctx path calls c4iw_dealloc() directly, bypassing
c4iw_remove(), so the debugfs dentries leak and outlive the freed
c4iw_dev.
Move debugfs_remove_recursive() into c4iw_dealloc() so every path that
frees ctx->dev also removes its debugfs tree. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: read llcp_sock->local under the socket lock in getsockopt
nfc_llcp_getsockopt() read llcp_sock->local before lock_sock(sk) and
then dereferenced the cached pointer inside the locked region.
llcp_sock_bind() assigns and clears llcp_sock->local under the same
socket lock, dropping the last reference on its error path. A
getsockopt() racing an in-flight bind() can observe the pointer, block
on lock_sock(), and then dereference a freed nfc_llcp_local once bind()
has unwound.
Move the llcp_sock->local read and the NULL check inside the
lock_sock(sk) region so bind() cannot mutate or free the pointer between
the load and the use. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme/ioctl: check SUBMIT_IO with nvme_cmd_allowed()
Unlike IO_CMD / IO64_CMD, NVME_IOCTL_SUBMIT_IO never calls
nvme_cmd_allowed(). Unprivileged callers can thus issue I/O on a
partition device or write through a read-only file descriptor.
Pass flags and open_for_write through and reject disallowed commands
with -EACCES. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix NULL pointer dereference in nvmet_execute_identify_ns_zns()
When a host issues an Identify command with CNS 05h (I/O Command Set
specific Identify Namespace) and CSI 02h (ZNS) targeting a file-backed
namespace, nvmet_execute_identify_ns_zns() calls bdev_is_zoned() on
req->ns->bdev. A file-backed namespace has no block device, so
req->ns->bdev is NULL and bdev_is_zoned() dereferences it, oopsing.
The I/O command set is selected by the host-supplied CSI field and the
command is routed here whenever CONFIG_BLK_DEV_ZONED is enabled,
independent of the namespace backing type, so any file-backed namespace
is exposed.
Reject the command with Invalid Field when the namespace is not backed
by a block device. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-apple: Destroy the admin queue on removal
The admin queue is allocated with blk_mq_alloc_queue() but never
destroyed. nvme_free_ctrl() only drops the last reference and
blk_mq_exit_queue() and blk_sync_queue() never run: the hctx is never
moved to q->unused_hctx_list and the timeout timer and work stay armed on
a queue that is about to be freed which will eventually oops inside
blk_mq_timeout_work().
This can only be triggered when the controller fails to come up and is
then immediately torn down again which is why no one ever ran into this
before.
Let's just copy what the pcie driver does: unquiesce and destroy the admin
queue before nvme_uninit_ctrl().
With this the following WARN followed by a panic no longer happens:
WARNING: block/blk-mq.c:4390 at blk_mq_release+0x194/0x238, CPU#4: kworker/u34:4/119
CPU: 4 UID: 0 PID: 119 Comm: kworker/u34:4 Not tainted 7.2.0-rc1-dirty #248 PREEMPT
Hardware name: Apple Mac mini (M1, 2020) (DT)
Workqueue: nvme-wq apple_nvme_remove_dead_ctrl_work
pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : blk_mq_release+0x194/0x238
lr : blk_mq_release+0x58/0x238
sp : ffffc000833a3b50
x29: ffffc000833a3b50 x28: ffff80001d0450f8 x27: ffff800020c95200
x26: 0000000000000088 x25: 0000000000000000 x24: ffff800020f36805
x23: 0000000000000000 x22: ffffc00081a86878 x21: ffff800020be9c60
x20: 0000000000000000 x19: ffff800022501698 x18: 000000000000000a
x17: 7365757165722066 x16: 666f7265776f7020 x15: 0000000000000000
x14: 0000000000000028 x13: 0000000000004def x12: 0000000000000003
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc000805b4fc8
x8 : ffffc00081915820 x7 : ffffc00081c4f3c8 x6 : 0000000000000001
x5 : 0000000000000004 x4 : ffff800022498d80 x3 : ffffc000833a3b14
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff800022501698
Call trace:
blk_mq_release+0x194/0x238 (P)
blk_put_queue+0x8c/0xf0
nvme_free_ctrl+0x4c/0x260
device_release+0x44/0x128
kobject_put+0xa0/0x120
put_device+0x1c/0x40
nvme_uninit_ctrl+0x48/0x60
apple_nvme_remove+0x54/0xb0
platform_remove+0x28/0x40
device_remove+0x54/0x98
device_release_driver_internal+
device_release_driver+0x20/0x38
apple_nvme_remove_dead_ctrl_wor
process_one_work+0x1f4/0x770
worker_thread+0x1b8/0x360
kthread+0x140/0x160
ret_from_fork+0x10/0x20
irq event stamp: 448
hardirqs last enabled at (447):in_unlock_irqrestore+0x74/0x80
hardirqs last disabled at (448): [<ffffc000811cf5c0>] el1_brk64+0x20/0x60
softirqs last enabled at (0): [ess+0xb28/0x2698
softirqs last disabled at (0): [<0000000000000000>] 0x0
---[ end trace 0000000000000000
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL),
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagA
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[0000000000000000] user address
Internal error: Oops: 0000000096000005 [#1] SMP
CPU: 7 UID: 0 PID: 54 Comm: kwor 7.2.0-rc1-dirty #248PREEMPT
Tainted: [W]=WARN
Hardware name: Apple Mac mini (M1, 2020) (DT)
Workqueue: kblockd blk_mq_timeou
pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : percpu_ref_tryget_many.cons
lr : percpu_ref_tryget_many.constprop.0+0xc0/0x168
sp : ffffc000829cbce0
x29: ffffc000829cbce0 x28: ffff800020be9f48 x27: ffff800013e503c0
x26: 0000000000000108 x25: 000009c05
x23: 0000000000000000 x22: ffffc000819f5000 x21: ffff800020be9f48
x20: ffff8001deda4808 x19: ffff8000a
x17: 00000000580e1fac x16: ffffc00082bbbb7c x15: 0000000000000000
x14: 0000000000000028 x13: 000000001
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc000829cbc20
x8 :
---truncated--- |
