| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mglru: fix and remove redundant unevictable folio handling
sort_folio() has a shortcut for moving folios that are no longer evictable
but are still sitting on a generation list. However, this shortcut is
buggy. It does not follow the PG_lru usage convention, and it has a more
serious issue.
Unevictable folios are not threaded on lists[LRU_UNEVICTABLE], so that
folio->lru can be reused to hold folio->mlock_count (see the comment in
lruvec_init()). Hence lruvec_add_folio() skips the list_add() for them,
and every other place that turns a folio unevictable initialises
mlock_count explicitly: lru_add() sets it to 0, __mlock_folio() and
__mlock_new_folio() set it to !!folio_test_mlocked(folio). sort_folio()
sets nothing, and the lru_gen_del_folio() right above it may have already
poisoned folio->lru via list_del(), so mlock_count ends up aliasing
LIST_POISON2, which reads as 0x122, i.e. 290. The result is user
visible. On munlock, __munlock_folio() decrements that bogus count, finds
it still non-zero and bails out before clearing PG_mlocked, so the folio
remains unevictable and the Mlocked accounting stays inflated until the
folio is freed.
The shortcut also touches the LRU flags in the wrong order. It calls
lru_gen_del_folio() while PG_lru is still set, so a concurrent
folio_test_clear_lru() (e.g. compaction, folio_isolate_lru()) can succeed
on a folio that has already been taken off the generation list, which may
lead to unexpected behavior.
So fix it by isolating them as common folios and letting the generic
shrink path cull them. This matches the classical LRU behavior, and there
should be no visible effect on the generic eviction or isolation behavior.
There is no performance concern either, such a folio goes through this
once, and then it is off the generation lists for good. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: thunderbolt: Disable work before freeing tbt on remove
tbt_altmode_remove() drops the plug and cable references without
draining tbt->work. The work function dereferences those references,
and can also requeue itself in its error path. The VDM callbacks can
queue the same work item.
Disable and drain tbt->work before dropping the references. This waits
for an existing invocation and prevents subsequent schedule_work()
calls from queueing it during teardown.
This issue was found by an in-house static analysis tool and confirmed
by manual code review. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/sysfs: Fix out-of-bounds read in pci_write_legacy_io()
pci_write_legacy_io() loads 4 bytes from the kernfs write buffer
regardless of how many bytes userspace wrote:
if (count != 1 && count != 2 && count != 4)
return -EINVAL;
return pci_legacy_write(bus, off, *(u32 *)buf, count);
kernfs_fop_write_iter() allocates the buffer with kmalloc(len + 1),
so a 1-byte write to the legacy_io sysfs file allocates 2 bytes and
the unconditional u32 load reads up to 2 bytes past the end of the
allocation, which KASAN reports as a slab-out-of-bounds read.
Similarly, a 2-byte write overreads by 1 byte.
Thus, read only the number of bytes requested using get_unaligned_le16()
and get_unaligned_le32() for the 2 and 4 byte cases, interpreting the
buffer as little-endian to match the byte ordering of PCI I/O port
space.
The PowerPC implementation previously compensated for the generic
code's native-endian 32-bit load by shifting the value into place
for the 1 and 2 byte cases. The shifts were only correct on
big-endian kernels.
On little-endian PowerPC (POWER8 and later), they extracted the wrong
bytes, so a 1-byte write wrote an out-of-bounds byte instead of the
requested value. On big-endian, the native load also caused out_le16()
and out_le32() to reverse the user's bytes on the wire for 2 and 4 byte
writes. The little-endian helpers resolve both issues, so the shifts
are removed.
No changes are needed for the Alpha platform.
The legacy_io file is root-only and exists only on Alpha and PowerPC,
the two architectures that define HAVE_PCI_LEGACY. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: rockchip-samsung-dcphy: fix out-of-range max_register
The PHY register block is 64KB, so with a register stride of 4 the
last accessible register sits at offset 0xfffc. max_register names
0x10000, one register past the end of the mapping: dumping the
registers through the regmap debugfs interface reads beyond the
ioremapped region and oopses on the unmapped page. The oops fires
with the regmap lock held, so later PHY operations deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: fix delegation_hash_table leak when nfs4_server_common_setup() fails
nfs4_server_common_setup() allocates server->delegation_hash_table
first, but server->destroy - the only path that frees the table via
nfs4_destroy_server() - is not assigned until the very end of the
function. If any intermediate step fails (the is_ds_only_client()
check, nfs4_init_session(), nfs4_get_rootfh(), or nfs_probe_server()),
the function returns with server->destroy still NULL, so the caller's
nfs_free_server() skips the destroy callback and the hash table is
leaked (4 KiB per attempt with the default delegation watermark).
This is trivially reachable from userspace: every failed NFSv4 mount
leaks one allocation. A client that persistently retries a mount that
cannot succeed leaks kernel memory without bound. Observed in
production where a Longhorn backup poller retried mount.nfs4 against
an NFSv3-only server roughly 10 times per second, leaking ~3.4 GiB of
unreclaimable slab (kmalloc-rnd-13-4k) per day; the node accumulated
12 GiB of leaked slab before the source was identified via the
kmem:kmalloc tracepoint (call_site=nfs4_delegation_hash_alloc).
Reproducer:
# server exports NFSv3 only (or export path absent for v4)
while :; do mount -t nfs4 <server>:/missing /mnt; done
# watch SUnreclaim in /proc/meminfo grow 4 KiB per iteration
Free the table on the error paths between the allocation and the
assignment of server->destroy. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: validate nseconds in TIME_DELEG decode paths
The xdrgen-based TIME_DELEG_ACCESS and TIME_DELEG_MODIFY decode arms
store a raw uint32_t nseconds directly into tv_nsec without enforcing
nseconds < NSEC_PER_SEC. The legacy nfsd4_decode_nfstime4 has this
check but the TIME_DELEG paths do not. A malformed timespec can
propagate through notify_change() to disk.
Add range checks in both nfs4xdr.c (SETATTR path) and
nfs4callback.c (CB_GETATTR path). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix dentry ref leak on V4ROOT export filehandle lookup
nfsd_set_fh_dentry() leaks the dentry reference from
exportfs_decode_fh_raw() when the NFS3_FHSIZE or NFS_FHSIZE
switch cases detect NFSEXP_V4ROOT and goto out. The out: label
calls exp_put() but never dput(dentry), and fhp->fh_dentry was
never assigned so fh_put() cannot compensate.
A crafted NFSv3 filehandle targeting a V4ROOT export's fsid
triggers the leak on every request. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent post-shutdown use-after-free in unlock_filesystem
Writing a filesystem path to /proc/fs/nfsd/unlock_filesystem runs
nfsd4_cancel_copy_by_sb() before nfsd_mutex is held and before the
handler confirms that nn->nfsd_serv is set. Once nfsd has shut down,
nfs4_state_destroy_net() has freed nn->conf_id_hashtbl but left the
pointer intact, so the cancel helper iterates freed slab memory as an
array of struct list_head and then dereferences a bogus nfs4_client
when it takes clp->async_lock. A local administrator holding
CAP_SYS_ADMIN can reach this use-after-free by stopping the server and
then writing to unlock_filesystem; KASAN reports a slab-use-after-free
read in nfsd4_cancel_copy_by_sb().
nfsd4_revoke_states() walks the same state tables and for that reason
already runs only under nfsd_mutex with nn->nfsd_serv confirmed
present. Move the async COPY cancel into that protected section so
every NFSv4 state-table walker on this path observes a running server.
Async copies exist only while the server runs, so gating the cancel on
nn->nfsd_serv loses nothing. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: drop recovered reloc root refs on recovery failure
During relocation recovery, each fs root gets a reference to its relocation
root. If loading or adding a later root fails, or if the first transaction
commit fails, btrfs_recover_relocation() jumps to out_unset before
merge_reloc_roots() and clean_dirty_subvols().
put_reloc_control() drops the list-owned relocation root references, but it
does not clear fs_root->reloc_root or drop the references owned by those
pointers. Mount cleanup only drops them when BTRFS_FS_ERROR is set, so an
error such as -ENOMEM while processing a later root can leave references
behind.
Keep temporary references to the fs roots associated during recovery. On
failure, clear their reloc_root pointers and drop the corresponding
references. Once the first transaction commit succeeds, drop only the
temporary fs root references and let the normal merge and cleanup paths
handle the relocation roots.
Fault injection on a pending-relocation image confirmed the cleanup gap.
With an injected first-commit failure, 25 fs roots had reloc_root set with
fs_error=0. With this fix, the same failure path drops that count to 0
before mount fails. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: call pagecache_isize_extended() in cifs_setsize() when extending
cifs_setsize() calls truncate_pagecache() but skips
pagecache_isize_extended() on extension. truncate_setsize() shows
the correct pattern:
i_size_write(inode, newsize);
if (newsize > oldsize)
pagecache_isize_extended(inode, oldsize, newsize);
truncate_pagecache(inode, newsize);
pagecache_isize_extended() zeroes the tail of the page straddling old
EOF. Without it, dirty bytes in that region can be written back to
the server, exposing stale data in the newly extended range. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: fix NULL dereference and integer overflow in rocket_job_push()
rocket_job_push() allocates a temporary array to hold all input and
output GEM object pointers:
bos = kvmalloc_array(job->in_bo_count + job->out_bo_count,
sizeof(void *), GFP_KERNEL);
memcpy(bos, job->in_bos, job->in_bo_count * sizeof(void *));
memcpy(&bos[job->in_bo_count], job->out_bos, ...);
Two bugs exist:
1. Missing NULL check: if kvmalloc_array() fails, bos is NULL and
the subsequent memcpy() dereferences it, causing a kernel NULL
pointer dereference.
2. Integer overflow: in_bo_count and out_bo_count are both u32, set
directly from userspace-supplied in_bo_handle_count and
out_bo_handle_count with no prior validation. Their sum is computed
in u32 arithmetic and can wrap to a smaller value, causing the
allocation count passed to kvmalloc_array() to be smaller than
intended. Subsequent uses still operate on the original counts when
copying and locking objects, which may lead to out-of-bounds accesses
on the temporary array.
Fix by using check_add_overflow() to detect count overflow before the
allocation, and adding a NULL check on the allocation result. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: initialize job domain before cleanup paths
rocket_ioctl_submit_job() releases rjob through rocket_job_put() on
allocation error paths. rocket_job_cleanup() unconditionally calls
rocket_iommu_domain_put(job->domain), but job->domain is assigned only
after task copying and BO lookups. A failure before that assignment can
therefore clean up a job with a NULL domain pointer.
Take the per-file domain reference before the first error path can release
rjob. Also clear rjob->tasks after freeing it in rocket_copy_tasks(), so
the common cleanup path cannot free the task array again after a task-copy
error. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: Fix error path handling in rocket_job_run()
In rocket_job_run(), after taking an extra fence reference for
job->done_fence via dma_fence_get(), the error paths have three bugs:
- The dma_fence reference held by job->done_fence is never released,
causing a reference leak.
- pm_runtime_get_sync() increments the usage counter even on failure,
but the error path does not decrement it, leaking the runtime PM
reference and preventing the NPU from suspending.
- A valid but unsignaled fence is returned to the DRM scheduler,
which triggers WARN("Fence ... released with pending signals!")
when the scheduler drops its reference.
Fix by replacing pm_runtime_get_sync() with pm_runtime_resume_and_get()
which auto-balances the usage counter on failure, releasing both fence
references on error, and returning ERR_PTR(ret) instead of the
unsignaled fence.
[tomeu: Refactored error paths to use consolidated goto labels] |
| In the Linux kernel, the following vulnerability has been resolved:
dm-io: clone the source bio instead of copying its biovec
For DM_IO_BIO requests, do_region() built each destination bio by walking
the source bio's biovec and re-adding the pages one at a time, tracking
the remaining transfer in sectors. The vector lengths are byte granular
and need not be sector aligned (e.g. a misaligned O_DIRECT buffer split
across pages), so the sector-based accounting could lose a sub-sector
fragment: to_sector() truncated the remainder and the outer loop spun
forever submitting empty bios, hanging the I/O.
There is no need to rebuild the biovec at all. The destination reads into
(or writes from) exactly the same pages as the source bio, so the bio can
simply clone the source's biovec with bio_alloc_clone() and remap it to
the target device. The clone inherits the source's iterator and alignment,
and the block layer splits it to the target's limits on submission, so the
whole region maps to a single cloned bio with no manual page copying or
sector accounting.
This removes the per-page copy path (and its open-coded bvec dpages
helpers) for bio-backed I/O and fixes the hang on misaligned direct I/O to
a dm-mirror device. Page-list, vma and kmem sources keep the existing copy
path. |
| In the Linux kernel, the following vulnerability has been resolved:
kho: fix size calculation in kho_preserved_memory_reserve()
kho_preserved_memory_reserve() calculates the size of a preservation by
doing 1 << (order + PAGE_SHIFT). Since the '1' is a 32-bit integer, it
can only be shifted by 31. That is, it will only work for preservations
up to 2 GiB. Larger preservations will trigger undefined behaviour.
While preservations larger than 2 GiB can't be obtained via folios
currently, they can be obtained via kho_preserve_pages().
For example, memblock reserve_mem uses kho_preserve_pages().
Reservations larger than 2 GiB are valid and will trigger this bug if
properly aligned.
Fix it by using 1UL for shifting. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: bound shrinker scans by examined checkpoint buffers
The jbd2 shrinker currently accounts only checkpoint buffers that it
successfully releases against nr_to_scan. Busy buffers therefore do not
consume the scan budget.
If a checkpoint transaction contains mostly busy buffers, the shrinker
can scan its entire checkpoint list while holding journal->j_list_lock.
Large checkpoint lists can result in excessive lock hold times and leave
other CPUs spinning on j_list_lock, causing soft lockups or RCU stalls.
Pass nr_to_scan into journal_shrink_one_cp_list() and decrement it for
every buffer examined, including busy buffers. Pass NULL from checkpoint
cleanup paths so their existing full-list behavior is preserved.
This restores the scan-budget semantics that existed before
journal_shrink_one_cp_list() was changed to always scan a complete
checkpoint list. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: check need_resched() when skipping busy checkpoint buffers
journal_shrink_one_cp_list() skips busy checkpoint buffers when called
with JBD2_SHRINK_BUSY_SKIP. The continue statement on this path also
skips the need_resched() check at the end of the loop body.
Consequently, when a checkpoint list contains mostly busy buffers, the
shrinker can walk the entire list while holding journal->j_list_lock,
even when a reschedule has been requested. Large checkpoint lists under
memory pressure can therefore cause long lock hold times and leave other
CPUs spinning on j_list_lock, resulting in soft lockups or RCU stalls.
Route the busy-buffer path through the need_resched() check so that the
shrinker can release j_list_lock and reschedule promptly, restoring
parity with the clean-buffer path, which already checks need_resched().
This does not change which checkpoint buffers are eligible for removal. |
| In the Linux kernel, the following vulnerability has been resolved:
params: fix charp corruption on allocation failure
param_set_charp() stores charp parameters in allocated memory after slab is
available, and releases the previous value when the parameter is updated.
The previous value is released before the replacement allocation succeeds.
If kmalloc_parameter() fails, the setter returns -ENOMEM with the parameter
left as NULL.
Failing zswap's compressor update before zswap is initialized can later
trigger:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:strcmp+0x10/0x30
Call Trace:
zswap_setup+0x3b1/0x490
zswap_enabled_param_set+0x5b/0xa0
param_attr_store+0x93/0xe0
module_attr_store+0x1c/0x30
kernfs_fop_write_iter+0x116/0x1f0
Allocate and copy the replacement first, then replace the parameter value
only after allocation succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reject oversized Read segments at decode time
The RPC/RDMA Read list decoder stores wire-supplied segment
lengths without validation. xdr_count_read_segments() checks
4-byte alignment for non-zero position values but does not
cap the segment length.
An oversized rs_length reaches svc_rdma_build_read_segment(),
which derives nr_bvec from it and can drive a large dynamic
bvec allocation before verifying that enough rq_pages remain.
If the post-allocation page-overrun guard fires, the freshly
acquired rw context is not returned, leaking the resource.
Reject any segment whose length exceeds the receive context's
page budget during Read list decoding, consistent with how
xdr_check_write_chunk() bounds Write segment counts against
rc_maxpages. Also return the rw context on the existing
post-allocation overrun path in svc_rdma_build_read_segment(),
keeping that defensive guard balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Use svc_xprt_put to free listener on create failure
svc_rdma_create() calls kfree(cma_xprt) when
svc_rdma_create_listen_id() fails. svc_xprt_init() has already
acquired a net namespace reference via get_net_track(); kfree
bypasses svc_xprt_free() which releases it.
Replace the kfree() with svc_xprt_put() so the kref_init birth
reference drops to zero and svc_xprt_free() dispatches
svc_rdma_free() to clean up properly. sc_cm_id is still NULL
at that point; the preceding patch added the necessary NULL
guard in svc_rdma_free().
svc_xprt_free() also drops the module reference via
module_put(), but the caller _svc_xprt_create() does the same
on xpo_create failure, double-putting the single
try_module_get() it acquired. Take a compensating
__module_get() before the svc_xprt_put() to keep the count
balanced, matching the convention in svc_rdma_accept()'s error
path. |
