| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rndis_host: add overflow check in rndis_rx_fixup()
Add an overflow check to ensure that data_offset + data_len + 8 does not
wrap, which would enable an OOB read of the USB data buffer. |
| ipmi-oem in FreeIPMI before 1.6.19 has a stack-based buffer overflow in _output_dell_system_info_cmc_ipv6_info in ipmi-oem/ipmi-oem-dell.c (cmc-ipv6-info subcommand to dell get-system-info). |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to corrupt memory due to an integer underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: fix OOB read of field->usage in hid_set_field()
hid_set_field() hands field->usage + offset to hid_dump_input() before
the guard that bounds offset:
hid_dump_input(field->report->device, field->usage + offset, value);
if (offset >= field->report_count) {
hid_err(...);
return -1;
}
Under CONFIG_DEBUG_FS hid_dump_input() dereferences that pointer, with
buf = hid_resolv_usage(usage->hid, NULL). The usage[] array is
allocated inline with the hid_field in hid_register_field() and holds
field->maxusage entries, so an offset past it reads off the end of the
kvzalloc()ed allocation and into a neighbouring object. Had the guard
run first, offset < report_count <= maxusage would already have confined
the pointer to the array.
A caller supplies such an offset today. picolcd_fb_send_tile()
validates only report->maxfield before issuing
hid_set_field(report->field[0], 11 + i, ...) for i = 0..31, so its
offsets are fixed at 11..42 and are never checked against the bound
field. When the device registers that field with fewer usages, the
framebuffer deferred-io work drives the read on every tile. KASAN
reports a 4-byte slab-out-of-bounds read in hid_dump_input() below
hid_set_field(), and the same boot logs "offset (1) exceeds
report_count (1)" from the guard that runs only afterwards.
Move the hid_dump_input() call below the guard. Because
field->maxusage >= field->report_count, the guard then establishes that
field->usage + offset lies inside the array before it is dereferenced,
for every caller and without changing behaviour on the valid path.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| Tapo
C100/C101 V5 contains a heap-based buffer overflow vulnerability in the RTSP
service. An authenticated attacker on the local network can send specially
crafted RTSP frame data containing oversized length values, resulting in
out-of-bounds heap writes.
Successful
exploitation can crash the RTSP service and trigger a device reboot, resulting
in a temporary denial-of-service condition. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: st21nfca: validate ATR_REQ length against the received frame
st21nfca_tm_recv_atr_req() checks that the received ATR_REQ frame is at
least ST21NFCA_ATR_REQ_MIN_SIZE and that the self-declared atr_req->length
is at least sizeof(struct st21nfca_atr_req), but never checks that
atr_req->length does not exceed the actual received length (skb->len).
st21nfca_tm_send_atr_res() then trusts the declared length:
gb_len = atr_req->length - sizeof(struct st21nfca_atr_req);
...
memcpy(atr_res->gbi, atr_req->gbi, gb_len);
so an RF peer that sends a short frame but sets atr_req->length larger
than the frame makes gb_len exceed the general bytes actually present,
and the memcpy reads out of bounds past the received skb. Those bytes are
placed in the ATR_RES and sent back to the peer (kernel-memory disclosure
to a proximity attacker); a larger declared length is an out-of-bounds
read (DoS).
Reject frames whose declared length exceeds the received length. The
adjacent nfc_tm_activated() path in the same function already derives its
general-bytes length from skb->len rather than the declared field.
Found by 0sec (https://0sec.ai) using automated source analysis; the
missing bound is evident from source. Compile-tested. |
| IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to cause a denial of service due to an out-of-bounds read. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a local attacker to cause a denial of service due to a stack-based buffer overflow. |
| A vulnerability was detected in valkey-io valkey up to 9.5.4/9.1.0. Affected by this vulnerability is the function createSlotImportJob of the file src/cluster_migrateslots.c of the component Slot Migration. The manipulation of the argument job_name results in out-of-bounds read. The attack can be executed remotely. The exploit is now public and may be used. Upgrading to version 9.0.5 and 9.1.1 addresses this issue. The patch is identified as f4dc3ca09eb650c2fe14060090a41c524eca803f. Upgrading the affected component is advised. |
| fastify versions before 5.12.2 implement the case-insensitive nature of HTTP header names by lowercasing names in a route's header schema before compiling it, but the transformation is incomplete: it lowercases the properties keys and the root-level required array, and does not lowercase the trigger and dependent names inside the JSON Schema Draft 7 dependencies keyword. Because Node stores request header names in lowercase, a canonical-case dependency such as requiring an authentication header whenever a privileged-mode header is present never matches, and the presence assertion is silently skipped. An unauthenticated remote client can therefore send the header that activates a privileged branch while omitting the header the dependency was meant to require, bypassing the conditional check. Users should upgrade to fastify 5.12.2 or later. |
| fast-uri accepts a host that contains an unbalanced or misplaced authority bracket without reporting an error. A host that starts with an opening bracket but does not end with a closing bracket is neither validated as an IP literal nor canonicalized as a domain name, so parse() returns it as the host with error undefined, while Node's URL and the HTTP clients built on it resolve the same string to a different host. An application that reads the parsed host to make a host decision, such as an SSRF denylist, a redirect allowlist, or proxy routing, and then passes the original URL to an HTTP client evaluates its policy against a string that is not the host the request reaches. The same host is carried through normalize, equal, and resolve. This affects fast-uri versions 2.4.5, 3.1.6, and 4.1.3, and is fixed in 2.4.6, 3.1.7, and 4.1.4, where parse() reports a malformed host for any host that contains a bracket but is not a valid IPv6 literal. |
| In the Linux kernel, the following vulnerability has been resolved:
hfs/hfsplus: fix u32 overflow in check_and_correct_requested_length
check_and_correct_requested_length() compares (off + len) against
node_size using u32 arithmetic. When the caller passes a large len
value (e.g. from an underflowed subtraction in hfs_brec_remove()),
off + len can wrap past 2^32 and produce a small result, causing the
bounds check to pass when it should fail.
For example, with off=14 and len=0xFFFFFFF2 (underflowed from
data_off - keyoffset - size in hfs_brec_remove), off + len wraps to 6,
which is less than a typical node_size of 512, so the check passes and
the subsequent memmove reads ~4GB past the node buffer.
Fix this by widening the addition to u64 before comparing against
node_size. This prevents the u32 wrap while keeping the logic
straightforward. |
| ** UNSUPPORTED WHEN ASSIGNED ** Stack-based Buffer Overflow vulnerability in Apache Lucy.
This issue affects Apache Lucy: all versions.
As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users.
Lucy is now maintained outside of the ASF
at https://github.com/lucysearch . This issue has been fixed in 0.8.0 there.
NOTE: This vulnerability only affects products that are no longer supported by the maintainer. |
| pymonocypher uses cython to wrap the Monocypher C library. Prior to version 4.0.2.8, the argon2i_32 implementation does not check the nb_blocks size. If the caller does not provide a sufficiently large buffer based on the API contract, then argon2i_32 will write past the end of the buffer and possibly corrupt the heap. This issue has been patched in version 4.0.2.8. |
| No description is available for this CVE. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Fix out-of-bounds firmware read in nxp_recv_fw_req_v3()
During the v3 firmware download the controller sends a v3_data_req with a
32 bit offset and a 16 bit len. nxp_recv_fw_req_v3() checks only the lower
bound of the offset and then sends firmware from that offset.
nxpdev->fw_dnld_v3_offset = offset - nxpdev->fw_v3_offset_correction;
serdev_device_write_buf(nxpdev->serdev, nxpdev->fw->data +
nxpdev->fw_dnld_v3_offset, len);
Nothing checks that fw_dnld_v3_offset + len stays within nxpdev->fw->size,
so a controller that asks for an offset or length past the firmware image
makes the driver read past the end of nxpdev->fw->data and send that
memory back over UART.
nxp_recv_fw_req_v1() already bounds the same write. Add the equivalent
check to the v3 path, reject the request when it falls outside the firmware
image, and zero len on the error path so the fw_v3_prev_sent bookkeeping at
free_skb stays consistent. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: terminate table name before find_table_lock()
update_counters() and compat_update_counters() forward a user-supplied
32-byte table name to find_table_lock() without NUL-terminating it. On a
lookup miss, find_inlist_lock() calls try_then_request_module(..., "%s%s",
"ebtable_", name), and vsnprintf() reads past the name field and the
stack object until it hits a zero byte.
BUG: KASAN: stack-out-of-bounds in string (lib/vsprintf.c:648 lib/vsprintf.c:730)
Read of size 1 at addr ffff8880119dfb20 by task exploit/147
Call Trace:
...
string (lib/vsprintf.c:648 lib/vsprintf.c:730)
vsnprintf (lib/vsprintf.c:2945)
__request_module (kernel/module/kmod.c:150)
do_update_counters.isra.0 (net/bridge/netfilter/ebtables.c:371 net/bridge/netfilter/ebtables.c:380)
update_counters (net/bridge/netfilter/ebtables.c:1440)
do_ebt_set_ctl (net/bridge/netfilter/ebtables.c:2573)
nf_setsockopt (net/netfilter/nf_sockopt.c:101)
ip_setsockopt (net/ipv4/ip_sockglue.c:1424)
raw_setsockopt (net/ipv4/raw.c:847)
__sys_setsockopt (net/socket.c:2393)
...
compat_do_replace() shares the same unterminated name via
compat_copy_ebt_replace_from_user(); terminate it there too so all
find_table_lock() callers behave alike. The other callers already
terminate the name after the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: module names must be null-terminated
We need to explicitly check the length, else we may pass non-null
terminated string to request_module(). |
| Substance3D - Sampler is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| An out-of-bounds read vulnerability exists in the underlying operating system of AOS-CX that could lead to unauthenticated information disclosure by sending a specially crafted packet. Successful exploitation of this vulnerability results in the ability to disclose sensitive information from the underlying operating system. |
