| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdnsp: fix stream context array leak in cdnsp_alloc_stream_info()
cdnsp_alloc_stream_info() allocates stream_info->stream_ctx_array with
cdnsp_alloc_stream_ctx(). If a later stream ring allocation or stream
mapping update fails, the error path frees the allocated stream rings
and stream_rings array, but leaves stream_ctx_array allocated.
Free the stream context array before falling through to the stream_rings
cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: mtu3: unmap request DMA on queue failure
mtu3_gadget_queue() maps the request before checking whether
the QMU GPD ring can accept another transfer. the request is
returned with -EAGAIN before it is linked on the endpoint
request list if mtu3_prepare_transfer() fails.
Normal completion and dequeue paths unmap requests from
mtu3_req_complete(), but this error path never reaches that
helper, so the DMA mapping is left active. Unmap the request
before returning from the failed queue path. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: misc: uss720: unregister parport on probe failure
uss720_probe() registers a parport before reading the 1284 register used
to detect unsupported Belkin F5U002 adapters. If get_1284_register()
fails, the error path drops the driver private data and the USB device
reference, but leaves the parport device registered.
Leaving the port registered is more than a private allocation leak:
parport_register_port() has already reserved a parport number and
registered the parport bus device, while pp->private_data still points at
the private data that the common error path is about to release.
Undo the pre-announce registration in the get_1284_register() failure
branch before jumping to the common private-data cleanup path. Clear
priv->pp first, matching the disconnect path and avoiding a stale pointer
in the private data.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix cancellation of a DIO and single read subrequests
When the preparation of a new subrequest for a read fails, if the
subrequest has already been added to the stream->subrequests list, it can't
simply be put and abandoned as the collector may see it. Also, if it
hasn't been queued yet, it has two outstanding refs that both need to be
put. Both DIO read and single-read dispatch fail at this; further, both
differ in the order they do things to the way buffered read works.
Fix cancellation of both DIO-read and single-read subrequests that failed
preparation by the following steps:
(1) Harmonise all three reads (buffered, dio, single) to queue the subreq
before prepping it.
(2) Make all three call netfs_queue_read() to do the queuing.
(3) Set NETFS_RREQ_ALL_QUEUED independently of the queuing as we don't
know the length of the subreq at this point.
(4) In all cases, set the error and NETFS_SREQ_FAILED flag on the subreq
and then call netfs_read_subreq_terminated() to deal with it. This
will pass responsibility off to the collector for dealing with it. |
| A user account with permission to deploy artifacts to a hosted Maven repository could upload a POM file containing an oversized metadata field. This causes future attempts to list or browse that repository's components to permanently fail until an administrator repairs the underlying data. Only the targeted repository is affected; other repositories and overall server health remain unaffected. |
| A weakness has been identified in ZhongBangKeJi CRMEB up to 6.0.0. Affected by this vulnerability is the function eval of the file /adminapi/system/crontab/save of the component Custom Scheduled Task Feature. This manipulation of the argument customCode causes os command injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. Vendor documents this as deliberate debug-only behavior. But isSafePhpCode blacklist offers no real RCE containment. |
| A vulnerability in the API of HPE Networking Fabric Composer could allow an unauthenticated remote attacker to run arbitrary commands on the underlying host if certain preconditions outside of the attacker's control are met. Successful exploitation of this vulnerability could allow an attacker to execute arbitrary commands on the underlying operating system leading to complete system compromise. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/hv-gpci: fix preempt count leak in sysfs show paths
Four sysfs show() callbacks in hv-gpci take get_cpu_var(hv_gpci_reqb)
(which calls preempt_disable()) but only call the matching put_cpu_var()
on the error path under the 'out:' label. Every successful read leaks
one preempt_disable():
processor_bus_topology_show()
processor_config_show()
affinity_domain_via_virtual_processor_show()
affinity_domain_via_domain_show()
(affinity_domain_via_partition_show() was already correct.)
On a CONFIG_PREEMPT=y kernel, repeated reads raise preempt_count and
eventually return to userspace with preemption still disabled. The
next user-mode page fault then hits faulthandler_disabled() == 1,
gets forced to SIGSEGV, and the resulting coredump trips
'BUG: scheduling while atomic' in call_usermodehelper_exec ->
wait_for_completion_state -> schedule:
BUG: scheduling while atomic: <task>/<pid>/0x00000004
...
__schedule_bug+0x6c/0x90
__schedule+0x58c/0x13a0
schedule+0x48/0x1a0
schedule_timeout+0x104/0x170
wait_for_completion_state+0x16c/0x330
call_usermodehelper_exec+0x254/0x2d0
vfs_coredump+0x1050/0x2590
get_signal+0xb9c/0xc80
do_notify_resume+0xf8/0x470
Add an out_success label that calls put_cpu_var() before returning
the byte count, mirroring affinity_domain_via_partition_show(). |
| openssl_encrypt versions before 1.4.9 fail to properly validate key derivation function costs in crafted files, allowing attackers to trigger unbounded memory and CPU exhaustion during pre-authentication processing. Attackers can supply malicious files with excessive KDF parameters to exhaust system resources and crash or wedge the process before password verification occurs. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix bio leak on mapping failure
The local bio is always NULL, so we'd leak the bio if the integrity
mapping failed. Just get it directly from the request. |
| A vulnerability exists in a management component that could allow an unauthenticated adjacent attacker to execute arbitrary commands. Successful exploitation could result in remote execution of arbitrary commands in the context of the affected utility. |
| The Velocity template engine, utilized by the affected product, accepts and processes template syntax without sufficient sanitization or validation of user-controlled input. This allows an authenticated administrator to inject arbitrary template syntax.
Successful exploitation enables an attacker with administrative privileges to execute arbitrary template code on the server. This can lead to significant security consequences, including remote code execution, manipulation of data, and unauthorized access to sensitive information. |
| A command sanitization bypass exists in the API of HPE Networking Fabric Composer. Successful exploitation could allow an authenticated low privilege operator user to escalate their permissions to those of an administrative user, leading to complete compromise of the affected system. |
| A command injection vulnerability exists in the web-based management interface of HPE Networking Fabric Composer that could allow an unauthenticated remote attacker to run arbitrary commands on the underlying host if certain preconditions outside of the attacker's control are met. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system leading to complete system compromise. |
| Allocation of Resources Without Limits or Throttling (CWE-770) in Kibana can lead to a denial of service via Excessive Allocation (CAPEC-130). An authenticated user with low-level privileges could submit a specially crafted request that causes Kibana to consume an unbounded amount of memory, rendering it unavailable to all users. |
| A vulnerability was found in NousResearch hermes-agent 0.18.0. This vulnerability affects the function resourceBufferFromUrl of the file apps/desktop/electron/main.ts of the component Electron Main Process. Performing a manipulation results in allocation of resources. The attack may be initiated remotely. copyImageFromUrl() entry point no longer reachable on current main. That function did exist at v2026.8.3 but was removed by v2026.8.19. The modern copy-image path is Electron-native event.sender.copyImageAt(). |
| Prometheus is an open-source monitoring system and time series database. Prior to versions 3.5.3 and 3.11.3, the remote read endpoint (/api/v1/read) does not validate the declared decoded length in a snappy-compressed request body before allocating memory. An unauthenticated attacker can send a small payload that causes a huge heap allocation per request. Under concurrent load this can exhaust available memory and crash the Prometheus process. This issue has been patched in versions 3.5.3 and 3.11.3. |
| Nuclio is a "Serverless" framework for Real-Time Events and Data Processing. From version 1.6.19 to before version 1.17.2, Nuclio's Dashboard build pipeline does not sanitize the spec.build.tempDir field before using it to construct a shell command. When the Kaniko container builder is enabled, a user with function-create permission can inject shell metacharacters into this field and achieve arbitrary command execution inside the Dashboard container, which runs with a Kubernetes service account holding wildcard access to Secrets, Pods, Jobs, and Deployments in its namespace. This issue has been patched in version 1.17.2. |
| Boruta is a standalone authorization server that aims to implement OAuth 2.0 and Openid Connect up to decentralized identity specifications. Prior to version 0.10.0, BorutaIdentityWeb.UserSettingsController.update/2 atomizes every key of the user-supplied request body via String.to_atom/1 before any validation. Because String.to_atom interns atoms permanently in the BEAM atom table (default cap 1,048,576 atoms; ERL_MAX_ATOMS), any authenticated end user can send PUT /users/settings with a user[<fresh-key>]=... body containing fresh keys per request and exhaust the global VM atom table. Once the table is full, the BEAM aborts with no more index entries in atom_tab and the entire OIDC server (auth, admin, gateway apps in the umbrella) crashes. The route is protected only by require_authenticated_user and a per-IP rate limit of 10 requests/second; a logged-in end user can hit it. The keys are atomized unconditionally before the downstream Accounts.update_user/6 call, so even failing updates contribute to exhaustion. This issue has been patched in version 0.10.0. |
| A vulnerability in the underlying operating system of HPE Networking Fabric Composer could allow an unauthenticated adjacent attacker to run arbitrary commands on the underlying host if certain preconditions outside of the attacker's control are met. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system. |
