| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/query: cap user size passed to copy_struct_to_user
io_handle_query_entry() clamps hdr.size for the inbound copy_from_user()
but keeps the original user value as usize. copy_struct_to_user() uses
that usize and, when it is larger than the kernel result, clear_user()s
the trailing bytes.
As hdr.size is a __u32, a query can request nearly 4 GiB of zeroing,
including on the error path where res_size stays 0. The interface is
reachable without a ring via IORING_REGISTER_QUERY.
Reject sizes larger than PAGE_SIZE, as recommended for copy_struct_*
interfaces. |
| In the Linux kernel, the following vulnerability has been resolved:
interconnect: Fix use after free in icc_get() and of_icc_get_by_index()
In of_icc_get_by_index() and icc_get(), if the dynamic allocation for
path->name fails via kasprintf(), the error handling path directly
calls kfree(path) to free the path object and returns an error.
However, prior to this point, path_find() calls path_init(), which
already links the path's requests into the req_list of the respective
interconnect nodes via hlist_add_head(). Directly invoking kfree(path)
leaves dangling pointers in the hlist. A subsequent call to icc_get()
or icc_set_bw() will traverse or modify these corrupted lists, triggering
a slab use afterfree.
KASAN report showing the vulnerability when reproducing via debugfs:
BUG: KASAN: slab-use-after-free in path_find+0x6f8/0xcfc
Write of size 8 at addr fff000000d43f748 by task sh/1
...
Call trace:
kasan_report+0xac/0xfc
path_find+0x6f8/0xcfc
icc_get+0x148/0x380
icc_get_set+0xf8/0x2d0
...
Freed by task 1:
kfree+0x1a0/0x4a4
icc_get+0x2cc/0x380
icc_get_set+0xf8/0x2d0
Fix this by replacing kfree(path) with the proper teardown function,
icc_put(path), which safely removes the requests from the req_list using
hlist_del() and drops the provider usage references before freeing the
memory.
Additionally, in icc_get(), ensure that the icc_lock mutex is released
prior to calling icc_put(path) to avoid a deadlock, as icc_put()
internally acquires the same lock. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: ipmb: validate write message length
ipmb_write() read message fields before validating the length byte.
A zero or short write can read uninitialized stack bytes.
A length smaller than the SMBus header underflows the block write length.
Require a non-empty buffer and the minimum IPMB request length.
Also require the length byte plus payload before parsing the message. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: Remove all sysfs files on registration failure
ipmi_add_smi() creates the nr_users and nr_msgs files before trying to
create the maintenance_mode file. If that last creation fails, the error
path removes only nr_users before dropping the final reference to the
interface.
Remove nr_msgs as well so no sysfs attribute embedded in the freed
interface remains registered. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: si: Fix NULL pointer dereference after failed registration
try_smi_init() allocates new_smi->si_sm and later calls
ipmi_register_smi_mod(), which maps to ipmi_add_smi().
During ipmi_add_smi(), the upper IPMI message handler obtains the
initial BMC device information through __bmc_get_device_id(). This can
fail if the BMC does not return a successful response to the Get Device
ID command.
When the BMC returns a nonzero completion code, the device-id helper
retries the command and eventually returns -EIO if the device ID still
cannot be fetched.
On this failure path, ipmi_add_smi() logs "Unable to get the device id"
and goes to out_err_started, where it invokes the lower driver's
shutdown callback. try_smi_init() then logs the returned registration
failure:
ipmi_si IPI0001:00: IPMI message handler: Unable to get the device id: -5
ipmi_si IPI0001:00: Unable to register device: error -5
For ipmi_si, the shutdown callback is shutdown_smi(), which cleans up
the SI state machine data, frees smi_info->si_sm, and sets
smi_info->si_sm and smi_info->intf to NULL.
However, intf->in_shutdown is not set on this failed-registration
rollback path. Therefore, the asynchronous redo_bmc_reg work item can
still retry BMC device-id probing after the lower driver has already
cleared its SI state machine data. In the observed case, that retry path
reached start_next_msg(), which passed the NULL smi_info->si_sm pointer
to the selected KCS state machine handler:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
Workqueue: events redo_bmc_reg [ipmi_msghandler]
RIP: start_kcs_transaction+0x2c/0x190 [ipmi_si]
Call Trace:
start_next_msg+0x50/0x80 [ipmi_si]
check_start_timer_thread.part.9+0x3b/0x50 [ipmi_si]
sender+0x69/0x80 [ipmi_si]
i_ipmi_request+0x2ac/0x9d0 [ipmi_msghandler]
__get_device_id.isra.29+0xaa/0x180 [ipmi_msghandler]
__bmc_get_device_id+0xef/0x950 [ipmi_msghandler]
redo_bmc_reg+0x52/0x60 [ipmi_msghandler]
process_one_work+0x1a7/0x360
Set intf->in_shutdown on the out_err_started path before invoking the
lower driver's shutdown callback. This prevents later redo_bmc_reg
retries from using an interface whose lower driver state has been
cleaned up, and applies the same shutdown state to other IPMI interfaces
as well. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi:msghandler: Cancel work cleanly on an error
If an error occurs during startup of an IPMI interface, it may have
scheduled work to run. The work needs to be canceled before the
interface can be freed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/iucv: filter frames in afiucv_hs_rcv() by ingress device
afiucv_hs_rcv() selects a socket from iucv_sk_list by matching four 8-byte
name fields in the transport header alone. No check is made against the
net_device the frame arrived on.
This can cause a frame arriving on any netdev to be delivered to an AF_IUCV
socket. Three problems follow.
First, a frame arriving over HiperSockets can be delivered to a socket
bound to the classic z/VM IUCV transport, which has iucv->hs_dev == NULL.
iucv_sock_bind() takes the classic path whenever the requested userid
matches iucv_userid, even on a guest that also has a HiperSockets device
carrying the same identifier. The child socket created by
afiucv_hs_callback_syn() for such a match inherits hs_dev = NULL and
transport = AF_IUCV_TRANS_HIPER, so the first send() on it returns -ENODEV.
The socket delivered to accept() is unusable.
Second, a frame arriving on one netdev can be delivered to a socket bound
to a different IQD device. Which can lead to
- Accept-queue exhaustion (DoS)
- Attacker-controlled peer identity in the child socket
- Data injection into existing sockets
- Fabric noise on the IQD fabric, where bogus replies are sent
- killing established connections
Third, all AF_IUCV sockets live in init_net, as iucv_sock_alloc() calls
sk_alloc(&init_net, ...). But even frames arriving on netdev devices in a
namespace can be delivered to an IUCV socket. So a process in an
unprivileged user and network namespace holding only the CAP_NET_RAW
capability valid within that namespace can send a raw ETH_P_AF_IUCV frame
on its own lo device and have it matched against init_net sockets.
Fix all three by skipping any socket whose hs_dev does not match the
ingress device. A classic z/VM IUCV socket has hs_dev == NULL; the ingress
dev is never NULL, so classic sockets are skipped automatically. An unbound
HIPER socket also has hs_dev == NULL and is skipped. A bound HIPER socket
is only reachable from the exact IQD device it was bound to. Because hs_dev
is always a device in init_net (iucv_sock_bind() scans
for_each_netdev_rcu(&init_net, ...) exclusively), a frame whose ingress
device belongs to another namespace never matches any socket.
Note that AF_IUCV over HiperSockets provides no per-connection
authentication: no sequence numbers, no TLS, no nonce. The four name fields
identifying a connection are exchanged in plaintext on the shared
HiperSockets segment (VCHID). Any host on the same HiperSockets segment
could spoof any frame type against an existing connection. That is a
protocol-level property unchanged by this patch. The fix reduces the attack
surface to peers present on the same HiperSockets segment. |
| In the Linux kernel, the following vulnerability has been resolved:
xdp: fix zero-copy frame layout
xdp_convert_zc_to_xdp_frame() clones an XSK packet into an order-0 page
and advertises PAGE_SIZE as its frame size. It allows the copied frame
to occupy the page tail needed by skb_shared_info and records zero
headroom even when metadata separates the frame header from packet data.
An AF_XDP zero-copy packet redirected through cpumap can therefore make
the skb overlap skb_shared_info or place it beyond the allocated page.
Limit the copied layout to SKB_WITH_OVERHEAD(PAGE_SIZE) and include the
metadata length in frame headroom. Redirect callers already handle a
NULL conversion result.
BUG: KASAN: slab-out-of-bounds in skb_gro_receive
Write of size 4 at addr ffff88800cf37004 by task cpumap/1/map:1/146
Call Trace:
skb_gro_receive (net/core/gro.c:174)
udp_gro_receive (net/ipv4/udp_offload.c:812)
inet_gro_receive (net/ipv4/af_inet.c:1539)
dev_gro_receive (net/core/gro.c:515)
gro_receive_skb (net/core/gro.c:633)
cpu_map_kthread_run (kernel/bpf/cpumap.c:395)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:164)
ret_from_fork_asm (arch/x86/entry/entry_64.S:255)
Kernel panic - not syncing: KASAN: panic_on_warn set ... |
| In the Linux kernel, the following vulnerability has been resolved:
slip: fix use-after-free in sl_sync()
slip_devs[] stores bare net_device pointers and takes no reference on
them. sl_sync() and sl_alloc() walk that table from slip_open() under
rtnl_lock(), while an entry is dropped by sl_free_netdev(), which
sl_setup() installs as dev->priv_destructor.
priv_destructor is called from netdev_run_todo(), which deliberately
runs with the RTNL semaphore released so that it can sleep while waiting
for the device refcount to drop:
/* Snapshot list, allow later requests */
list_replace_init(&net_todo_list, &list);
__rtnl_unlock();
...
if (dev->priv_destructor)
dev->priv_destructor(dev); /* slip_devs[i] = NULL */
if (dev->needs_free_netdev)
free_netdev(dev);
...
/* Free network device */
kobject_put(&dev->dev.kobj);
So rtnl_lock() does not serialise slip_open() against the teardown at
all. sl_sync() can load slip_devs[i] while the entry is still published
and dereference it after netdev_run_todo() has run the destructor and
released the device:
CPU0 (slip_open) CPU1 (slip_close)
unregister_netdev()
rtnl_unlock()
netdev_run_todo()
__rtnl_unlock()
rtnl_lock()
sl_sync()
dev = slip_devs[i]
priv_destructor(dev)
slip_devs[i] = NULL
kobject_put(&dev->dev.kobj)
/* dev is freed */
sl = netdev_priv(dev)
if (sl->tty || sl->leased) /* use-after-free */
BUG: KASAN: use-after-free in sl_sync drivers/net/slip/slip.c:730 [inline]
BUG: KASAN: use-after-free in slip_open+0xef4/0x1210 drivers/net/slip/slip.c:806
Read of size 1 at addr ffff8880712dac71 by task syz-executor.2/6506
CPU: 2 PID: 6506 Comm: syz-executor.2 Not tainted 6.1.134-syzkaller-00260-g0c8fc3469765 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
sl_sync drivers/net/slip/slip.c:730 [inline]
slip_open+0xef4/0x1210 drivers/net/slip/slip.c:806
tty_ldisc_open+0xa2/0x120 drivers/tty/tty_ldisc.c:433
tty_set_ldisc+0x324/0x720 drivers/tty/tty_ldisc.c:564
tiocsetd drivers/tty/tty_io.c:2428 [inline]
tty_ioctl+0x5f0/0x1530 drivers/tty/tty_io.c:2712
Allocated by task 6502:
alloc_netdev_mqs+0x98/0xfe0 net/core/dev.c:10719
sl_alloc drivers/net/slip/slip.c:756 [inline]
slip_open+0x36d/0x1210 drivers/net/slip/slip.c:817
tty_ldisc_open+0xa2/0x120 drivers/tty/tty_ldisc.c:433
tty_set_ldisc+0x324/0x720 drivers/tty/tty_ldisc.c:564
Freed by task 6497:
device_release+0xa2/0x240 drivers/base/core.c:2507
kobject_put+0x179/0x280 lib/kobject.c:729
netdev_run_todo+0x6c8/0xef0 net/core/dev.c:10509
slip_close+0x166/0x1c0 drivers/net/slip/slip.c:906
tty_ldisc_close+0x113/0x1a0 drivers/tty/tty_ldisc.c:456
tty_ldisc_kill+0x94/0x160 drivers/tty/tty_ldisc.c:614
tty_ldisc_release+0xe3/0x2b0 drivers/tty/tty_ldisc.c:782
tty_release+0xbcc/0xe70 drivers/tty/tty_io.c:1860
Commit e58c19124189 ("slip: Fix use-after-free Read in slip_open") fixed
a different source of stale entries - a device left in slip_devs[] after
slip_open() freed it on the registration error path - and does not
address this race, which is why the report survives it.
Drop the entry from ndo_uninit instead. unregister_netdevice() calls
ndo_uninit under RTNL, before the device is queued to netdev_run_todo(),
so an entry that sl_sync() can still see while holding RTNL belongs to a
device that cannot be freed until RTNL is dropped. sl_free_netdev()
stays only for the slip_open() error path, where register_netdevice()
may have failed before ndo_init and ndo_uninit is then not called
either. Both running for the same device is harmless: the
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: tun: bound receive headroom
tun_get_user() uses tun->align both as skb headroom and when choosing how
much packet data to keep linear. OVS can propagate an oversized headroom
request from another port to TUN or TAP.
When align is larger than the usable space in a one-page skb head,
SKB_MAX_HEAD(align) underflows and the result becomes negative when stored
in good_linear. That value later wraps when assigned to the size_t linear
variable, and tun_alloc_skb() can place skb->data outside the allocated
head.
Bound the headroom stored by TUN to the one-page skb-head budget and the
largest non-sentinel 16-bit skb header offset. Leave one linear byte for
raw TUN and a complete Ethernet header for TAP, including NET_IP_ALIGN.
Also pull the raw-TUN protocol byte and the TAP Ethernet header before
accessing them, so these checks remain safe for nonlinear skbs supplied by
other allocation paths. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: realtek: use gpiod_set_value_cansleep for reset GPIO
rtl83xx_reset_assert() and rtl83xx_reset_deassert() are only called from
the probe path, which may sleep and is not timing-critical. When the
reset GPIO is provided by a sleeping controller such as an I2C I/O
expander, gpiod_set_value() warns:
WARNING: drivers/gpio/gpiolib.c:4030 at gpiod_set_value+0x44/0x80, CPU#1: kworker/u16:4/61
Hardware name: B&O MAP CA33 Rev f (UNKNOWN) (DT)
Workqueue: events_unbound deferred_probe_work_func
pc : gpiod_set_value+0x44/0x80
lr : rtl83xx_probe+0x1d8/0x3a0
Call trace:
gpiod_set_value+0x44/0x80 (P)
rtl83xx_probe+0x1d8/0x3a0
realtek_mdio_probe+0x24/0xa0
mdio_probe+0x38/0x78
really_probe+0xc4/0x3e0
__driver_probe_device+0x15c/0x1b8
driver_probe_device+0xb4/0x120
__device_attach_driver+0xb8/0x1a0
bus_for_each_drv+0x88/0xf0
__device_attach+0xa0/0x1d8
device_initial_probe+0x54/0x68
bus_probe_device+0x38/0xa0
deferred_probe_work_func+0xb8/0x120
process_one_work+0x184/0x4e8
worker_thread+0x188/0x308
kthread+0x130/0x150
ret_from_fork+0x10/0x20
Switch both helpers to gpiod_set_value_cansleep() so such a reset GPIO can
be used without triggering the warning.
The reset GPIO has been driven with the non-sleeping gpiod_set_value()
since the driver was added in v4.19. The call has since been refactored
across several files - from realtek-smi.c / realtek-mdio.c into the common
rtl83xx.c module and then into the rtl83xx_reset_assert() and
rtl83xx_reset_deassert() helpers (both in v6.9). This patch therefore
applies as-is only to kernels that carry those helpers (v6.9+); older
stable kernels need the same gpiod_set_value_cansleep() conversion at the
corresponding open-coded call sites. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bnxt: ring the doorbell when SW USO exits early
When a burst of packets is handed down to the driver, the driver defers
the doorbell to the end by setting txr->kick_pending = 1. The normal TX
path handles this, but the SW USO path can miss it if it returns
early.
If bnxt_sw_udp_gso_xmit runs but returns early with NETDEV_TX_BUSY and
txr->kick_pending was previously set to 1, then the TX queue can
stall because the driver wrote some BDs but never wrote the doorbell.
The device won't know to do the TX which would generate the completion
that would wake the queue back up.
Simplify bnxt_sw_udp_gso_xmit to set txr->kick_pending in its success
case and check the flag on return. The added check after
bnxt_sw_udp_gso_xmit returns ensures that any pending doorbells are
written handling both successful USO and any early returns, which
prevents the TX queue stall mentioned above.
This TX queue stall was observed on a production system with a netdev TX
watchdog informing about the queue stall. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipa: fix stalled modem TX queue after runtime resume
ipa_start_xmit() unconditionally stops the TX queue before calling
pm_runtime_get(), relying on the wake scheduled by runtime resume
(ipa_modem_wake_queue_work()) to restart it once power is ACTIVE.
But that work is queued from within the runtime resume callback,
before the device's power state reaches RPM_ACTIVE, so it can run
while the device is still RPM_RESUMING. The wake is then consumed
too early: the transmit it restarts stops the queue again,
pm_runtime_get() returns -EINPROGRESS without arranging any future
wake (deferred_resume exists only for RPM_SUSPENDING), and after the
resume completes nothing is left to wake the queue. Transmit stalls
permanently: packets pile up in the qdisc behind the stopped queue,
the device runtime-suspends, and since the netdev registers no
ndo_tx_timeout the watchdog never fires. Observed on SM7635
(Fairphone 6) as the cellular data path going permanently deaf
within hours, RX included, since nothing resumes the suspended
endpoints.
Close the window by making the wake work wait for the resume to
complete (pm_runtime_get_sync()) before waking the queue. Every
queue stop is then guaranteed a later wake that happens while power
is ACTIVE; a transmit racing a new suspend/resume cycle re-schedules
the work. If the device could not be resumed, wake the queue anyway
so pending packets are dropped by the transmit path rather than
stranded.
The STARTED power flag used to narrow this window: a wake running
before the transmit path's stop suppressed that stop, but only once,
as the flag was cleared by the first stop it absorbed. Removing the
flag made a single transmit during an in-flight resume sufficient to
strand the queue, which is the form observed.
With an accelerated reproducer (autosuspend delay shortened to 5 ms,
~20 packets/s of TX), an unpatched kernel stalled three times in
230 s / 4380 packets; with this patch the same test ran 3601 s /
70298 packets without a stall. |
| In the Linux kernel, the following vulnerability has been resolved:
net: l2tp: do not propagate multicast notification errors
The tunnel create, tunnel modify, session create, and session modify
netlink handlers send multicast notifications through helpers that can fail
while allocating or encoding a message, or while multicasting it.
For tunnel and session create/modify, a notification is sent after the live
operation has completed. Returning a best-effort notification error as the
command result can therefore report failure for an operation that already
committed and can cause callers to retry and accumulate live objects.
Keep sending notifications for listener visibility, but do not propagate
their best-effort status as the command result. This also keeps the tunnel
modify command consistent with the other notification-only paths. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: hold a reference to the route device in mctp_route_lookup()
mctp_route_lookup() uses rt->dev without holding a reference on it.
mctp_route_lookup_single() returns the route under RCU only, so the
route's device can be torn down concurrently: mctp_dev_put() drops the
last reference and synchronously kfree()s mdev->addrs. mctp_dev_saddr()
then reads rt->dev->addrs[0], giving a use-after-free reachable by an
unprivileged local AF_MCTP user on the receive/forwarding path (no
CAP_NET_RAW required):
BUG: KASAN: slab-use-after-free in mctp_route_lookup
Read of size 1 at addr ... by task mctp_uaf/...
mctp_route_lookup
mctp_pkttype_receive
Freed by task ...:
kfree
mctp_dev_put
mctp_dev_notify
In the same window mctp_dst_from_route() -> mctp_dev_hold() also
increments a refcount that has already reached zero
("refcount_t: addition on 0 ... mctp_dev_hold").
This reintroduces the use-after-free class of CVE-2023-3439: the source
address lookup was moved ahead of the point where the destination takes
its device reference.
Take a reference with refcount_inc_not_zero() before touching rt->dev,
skip a device that is already dead, and drop the reference once the
destination has taken its own. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix flow mask use-after-free on flow deletion
The commit in the Fixes tag below made so flow->mask free is scheduled
via RCU right after it is removed from the flow table. The pointer
stays in the flow structure and it can be accessible while in the same
RCU critical section. This is done to avoid requiring ovs_mutex for
the ovs_flow_free().
However, while removing the flow during processing of CMD_DEL, we do
not take RCU read lock before the removal, and ovs_flow_cmd_fill_info()
uses the flow->mask pointer afterwards. The RCU read lock is taken,
but it's already late at that point. The comment on that line
acknowledges that the lock is cosmetic and doesn't serve a real purpose.
This leads to use-after-free if the RCU grace period passes between
removal and the filling. It is a short race window, but it is there
and can lead to a real crash in case memory allocation for the info
takes a bit longer:
BUG: KASAN: slab-use-after-free in __ovs_nla_put_key
net/openvswitch/flow_netlink.c:1996
BUG: KASAN: slab-use-after-free in ovs_nla_put_key+0x2463/0x2e30
net/openvswitch/flow_netlink.c:2250
Read of size 4 at addr ffff88801ee89970 by task ovs_flow_del_ec/9487
Call Trace:
<TASK>
__ovs_nla_put_key net/openvswitch/flow_netlink.c:1996
ovs_nla_put_key+0x2463/0x2e30 net/openvswitch/flow_netlink.c:2250
ovs_flow_cmd_fill_info+0x420/0x9c0 net/openvswitch/datapath.c:930
ovs_flow_cmd_del+0x53a/0x970 net/openvswitch/datapath.c:1467
...
netlink_rcv_skb+0x156/0x420 net/netlink/af_netlink.c:2556
</TASK>
Allocated by task 9487:
mask_alloc net/openvswitch/flow_table.c:967
flow_mask_insert net/openvswitch/flow_table.c:1012
ovs_flow_tbl_insert+0xea2/0x1a90 net/openvswitch/flow_table.c:1084
ovs_flow_cmd_new+0x7e3/0xd90 net/openvswitch/datapath.c:1086
...
netlink_rcv_skb+0x156/0x420 net/netlink/af_netlink.c:2556
Freed by task 9485:
rcu_free_sheaf+0x1e/0x100 mm/slub.c:5978
rcu_do_batch kernel/rcu/tree.c:2645
rcu_core+0x59c/0x10c0 kernel/rcu/tree.c:2897
handle_softirqs+0x1e4/0x9a0 kernel/softirq.c:622
...
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062
ovs_flow_tbl_remove() must be called after the ovs_flow_cmd_fill_info()
to avoid this race. This also helps with cleaning up the forced cast
and the cosmetic RCU read lock. Before the commit in the Fixes tag the
order did not matter as long as the flow object itself was not freed.
A wider RCU critical section could be another option, but we have a
GFP_KERNEL allocation in the way.
Reported by Trend Micro's Zero Day Initiative as ZDI-CAN-32042. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phylink: correctly validate returned PCS in phylink_inband_caps
In phylink_inband_caps(), the PCS returned by mac_select_pcs is only
checked if NULL but mac_select_pcs can also return an error pointer.
This can cause a kernel panic as phylink_pcs_inband_caps() only checks
if passed PCS is not NULL and directly dereference ops from the phylink_pcs
struct.
Use the IS_ERR_OR_NULL macro to address both case where the returned
PCS can be NULL or an error pointer and prevent a kernel panic. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ravb: avoid dereferencing an invalid PTP clock
The PTP clock is unavailable before the first open, so querying its
index can dereference a NULL pointer. Registration failures can also
leave an error pointer in priv->ptp.clock.
Cache the PHC index separately and report -1 while no clock is
registered. Normalize registration errors to NULL and preserve the
static timestamping capabilities. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ravb: serialize PTP clock teardown
ravb_ptp_interrupt() can race with ravb_ptp_stop() and pass the clock to
ptp_clock_event() while ptp_clock_unregister() is freeing it. This can
lead to a use-after-free.
Use READ_ONCE() and WRITE_ONCE() for lockless access to the clock pointer.
Atomically detach it with xchg() before disabling PTP interrupts, then
synchronize all IRQs which can invoke ravb_ptp_interrupt() before
unregistering the detached clock.
A handler which read the old pointer completes before the clock is
unregistered, while later handlers read NULL and skip the event. |
| In the Linux kernel, the following vulnerability has been resolved:
net: thunderbolt: Release the Rx HopID that was handed out on mismatch
tb_xdomain_alloc_in_hopid() passes the wanted HopID to ida_alloc_range()
as the lower bound, so a taken id is not an error there: the allocator
returns the next free one above it. tbnet_connected_work() asks for the
peer's transmit path, treats any other id as a failure and returns
without releasing what it got, so that allocation stays live for the rest
of the XDomain connection with nothing left holding a reference to it.
Release the id when it is not the one we asked for, the same way the
error unwind at the end of the function releases the expected one. |
