| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Make sure trace_printk() can output as soon as it can be used
Currently trace_printk() can be used as soon as early_trace_init() is
called from start_kernel(). But if a crash happens, and
"ftrace_dump_on_oops" is set on the kernel command line, all you get will
be:
[ 0.456075] <idle>-0 0dN.2. 347519us : Unknown type 6
[ 0.456075] <idle>-0 0dN.2. 353141us : Unknown type 6
[ 0.456075] <idle>-0 0dN.2. 358684us : Unknown type 6
This is because the trace_printk() event (type 6) hasn't been registered
yet. That gets done via an early_initcall(), which may be early, but not
early enough.
Instead of registering the trace_printk() event (and other ftrace events,
which are not trace events) via an early_initcall(), have them registered at
the same time that trace_printk() can be used. This way, if there is a
crash before early_initcall(), then the trace_printk()s will actually be
useful. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: prevent potential spectre v1 gadget in ip_metrics_convert()
if (!type)
continue;
if (type > RTAX_MAX)
return -EINVAL;
...
metrics[type - 1] = val;
@type being used as an array index, we need to prevent
cpu speculation or risk leaking kernel memory content. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Skip task with pid=1 in send_signal_common()
The following kernel panic can be triggered when a task with pid=1 attaches
a prog that attempts to send killing signal to itself, also see [1] for more
details:
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
CPU: 3 PID: 1 Comm: systemd Not tainted 6.1.0-09652-g59fe41b5255f #148
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x100/0x178 lib/dump_stack.c:106
panic+0x2c4/0x60f kernel/panic.c:275
do_exit.cold+0x63/0xe4 kernel/exit.c:789
do_group_exit+0xd4/0x2a0 kernel/exit.c:950
get_signal+0x2460/0x2600 kernel/signal.c:2858
arch_do_signal_or_restart+0x78/0x5d0 arch/x86/kernel/signal.c:306
exit_to_user_mode_loop kernel/entry/common.c:168 [inline]
exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296
do_syscall_64+0x44/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd
So skip task with pid=1 in bpf_send_signal_common() to avoid the panic.
[1] https://lore.kernel.org/bpf/20221222043507.33037-1-sunhao.th@gmail.com |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Check for any of tcp_bpf_prots when cloning a listener
A listening socket linked to a sockmap has its sk_prot overridden. It
points to one of the struct proto variants in tcp_bpf_prots. The variant
depends on the socket's family and which sockmap programs are attached.
A child socket cloned from a TCP listener initially inherits their sk_prot.
But before cloning is finished, we restore the child's proto to the
listener's original non-tcp_bpf_prots one. This happens in
tcp_create_openreq_child -> tcp_bpf_clone.
Today, in tcp_bpf_clone we detect if the child's proto should be restored
by checking only for the TCP_BPF_BASE proto variant. This is not
correct. The sk_prot of listening socket linked to a sockmap can point to
to any variant in tcp_bpf_prots.
If the listeners sk_prot happens to be not the TCP_BPF_BASE variant, then
the child socket unintentionally is left if the inherited sk_prot by
tcp_bpf_clone.
This leads to issues like infinite recursion on close [1], because the
child state is otherwise not set up for use with tcp_bpf_prot operations.
Adjust the check in tcp_bpf_clone to detect all of tcp_bpf_prots variants.
Note that it wouldn't be sufficient to check the socket state when
overriding the sk_prot in tcp_bpf_update_proto in order to always use the
TCP_BPF_BASE variant for listening sockets. Since commit
b8b8315e39ff ("bpf, sockmap: Remove unhash handler for BPF sockmap usage")
it is possible for a socket to transition to TCP_LISTEN state while already
linked to a sockmap, e.g. connect() -> insert into map ->
connect(AF_UNSPEC) -> listen().
[1]: https://lore.kernel.org/all/00000000000073b14905ef2e7401@google.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
fscache: Use wait_on_bit() to wait for the freeing of relinquished volume
The freeing of relinquished volume will wake up the pending volume
acquisition by using wake_up_bit(), however it is mismatched with
wait_var_event() used in fscache_wait_on_volume_collision() and it will
never wake up the waiter in the wait-queue because these two functions
operate on different wait-queues.
According to the implementation in fscache_wait_on_volume_collision(),
if the wake-up of pending acquisition is delayed longer than 20 seconds
(e.g., due to the delay of on-demand fd closing), the first
wait_var_event_timeout() will timeout and the following wait_var_event()
will hang forever as shown below:
FS-Cache: Potential volume collision new=00000024 old=00000022
......
INFO: task mount:1148 blocked for more than 122 seconds.
Not tainted 6.1.0-rc6+ #1
task:mount state:D stack:0 pid:1148 ppid:1
Call Trace:
<TASK>
__schedule+0x2f6/0xb80
schedule+0x67/0xe0
fscache_wait_on_volume_collision.cold+0x80/0x82
__fscache_acquire_volume+0x40d/0x4e0
erofs_fscache_register_volume+0x51/0xe0 [erofs]
erofs_fscache_register_fs+0x19c/0x240 [erofs]
erofs_fc_fill_super+0x746/0xaf0 [erofs]
vfs_get_super+0x7d/0x100
get_tree_nodev+0x16/0x20
erofs_fc_get_tree+0x20/0x30 [erofs]
vfs_get_tree+0x24/0xb0
path_mount+0x2fa/0xa90
do_mount+0x7c/0xa0
__x64_sys_mount+0x8b/0xe0
do_syscall_64+0x30/0x60
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Considering that wake_up_bit() is more selective, so fix it by using
wait_on_bit() instead of wait_var_event() to wait for the freeing of
relinquished volume. In addition because waitqueue_active() is used in
wake_up_bit() and clear_bit() doesn't imply any memory barrier, use
clear_and_wake_up_bit() to add the missing memory barrier between
cursor->flags and waitqueue_active(). |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/cpuset: Fix wrong check in update_parent_subparts_cpumask()
It was found that the check to see if a partition could use up all
the cpus from the parent cpuset in update_parent_subparts_cpumask()
was incorrect. As a result, it is possible to leave parent with no
effective cpu left even if there are tasks in the parent cpuset. This
can lead to system panic as reported in [1].
Fix this probem by updating the check to fail the enabling the partition
if parent's effective_cpus is a subset of the child's cpus_allowed.
Also record the error code when an error happens in update_prstate()
and add a test case where parent partition and child have the same cpu
list and parent has task. Enabling partition in the child will fail in
this case.
[1] https://www.spinics.net/lists/cgroups/msg36254.html |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Skip invalid kfunc call in backtrack_insn
The verifier skips invalid kfunc call in check_kfunc_call(), which
would be captured in fixup_kfunc_call() if such insn is not eliminated
by dead code elimination. However, this can lead to the following
warning in backtrack_insn(), also see [1]:
------------[ cut here ]------------
verifier backtracking bug
WARNING: CPU: 6 PID: 8646 at kernel/bpf/verifier.c:2756 backtrack_insn
kernel/bpf/verifier.c:2756
__mark_chain_precision kernel/bpf/verifier.c:3065
mark_chain_precision kernel/bpf/verifier.c:3165
adjust_reg_min_max_vals kernel/bpf/verifier.c:10715
check_alu_op kernel/bpf/verifier.c:10928
do_check kernel/bpf/verifier.c:13821 [inline]
do_check_common kernel/bpf/verifier.c:16289
[...]
So make backtracking conservative with this by returning ENOTSUPP.
[1] https://lore.kernel.org/bpf/CACkBjsaXNceR8ZjkLG=dT3P=4A8SBsg0Z5h5PWLryF5=ghKq=g@mail.gmail.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: don't skip expired elements during walk
There is an asymmetry between commit/abort and preparation phase if the
following conditions are met:
1. set is a verdict map ("1.2.3.4 : jump foo")
2. timeouts are enabled
In this case, following sequence is problematic:
1. element E in set S refers to chain C
2. userspace requests removal of set S
3. kernel does a set walk to decrement chain->use count for all elements
from preparation phase
4. kernel does another set walk to remove elements from the commit phase
(or another walk to do a chain->use increment for all elements from
abort phase)
If E has already expired in 1), it will be ignored during list walk, so its use count
won't have been changed.
Then, when set is culled, ->destroy callback will zap the element via
nf_tables_set_elem_destroy(), but this function is only safe for
elements that have been deactivated earlier from the preparation phase:
lack of earlier deactivate removes the element but leaks the chain use
count, which results in a WARN splat when the chain gets removed later,
plus a leak of the nft_chain structure.
Update pipapo_get() not to skip expired elements, otherwise flush
command reports bogus ENOENT errors. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/hist: Fix out-of-bound write on 'action_data.var_ref_idx'
When generate a synthetic event with many params and then create a trace
action for it [1], kernel panic happened [2].
It is because that in trace_action_create() 'data->n_params' is up to
SYNTH_FIELDS_MAX (current value is 64), and array 'data->var_ref_idx'
keeps indices into array 'hist_data->var_refs' for each synthetic event
param, but the length of 'data->var_ref_idx' is TRACING_MAP_VARS_MAX
(current value is 16), so out-of-bound write happened when 'data->n_params'
more than 16. In this case, 'data->match_data.event' is overwritten and
eventually cause the panic.
To solve the issue, adjust the length of 'data->var_ref_idx' to be
SYNTH_FIELDS_MAX and add sanity checks to avoid out-of-bound write.
[1]
# cd /sys/kernel/tracing/
# echo "my_synth_event int v1; int v2; int v3; int v4; int v5; int v6;\
int v7; int v8; int v9; int v10; int v11; int v12; int v13; int v14;\
int v15; int v16; int v17; int v18; int v19; int v20; int v21; int v22;\
int v23; int v24; int v25; int v26; int v27; int v28; int v29; int v30;\
int v31; int v32; int v33; int v34; int v35; int v36; int v37; int v38;\
int v39; int v40; int v41; int v42; int v43; int v44; int v45; int v46;\
int v47; int v48; int v49; int v50; int v51; int v52; int v53; int v54;\
int v55; int v56; int v57; int v58; int v59; int v60; int v61; int v62;\
int v63" >> synthetic_events
# echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="bash"' >> \
events/sched/sched_waking/trigger
# echo "hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(\
pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\
pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\
pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\
pid,pid,pid,pid,pid,pid,pid,pid,pid)" >> events/sched/sched_switch/trigger
[2]
BUG: unable to handle page fault for address: ffff91c900000000
PGD 61001067 P4D 61001067 PUD 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 2 PID: 322 Comm: bash Tainted: G W 6.1.0-rc8+ #229
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:strcmp+0xc/0x30
Code: 75 f7 31 d2 44 0f b6 04 16 44 88 04 11 48 83 c2 01 45 84 c0 75 ee
c3 cc cc cc cc 0f 1f 00 31 c0 eb 08 48 83 c0 01 84 d2 74 13 <0f> b6 14
07 3a 14 06 74 ef 19 c0 83 c8 01 c3 cc cc cc cc 31 c3
RSP: 0018:ffff9b3b00f53c48 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffffffffba958a68 RCX: 0000000000000000
RDX: 0000000000000010 RSI: ffff91c943d33a90 RDI: ffff91c900000000
RBP: ffff91c900000000 R08: 00000018d604b529 R09: 0000000000000000
R10: ffff91c9483eddb1 R11: ffff91ca483eddab R12: ffff91c946171580
R13: ffff91c9479f0538 R14: ffff91c9457c2848 R15: ffff91c9479f0538
FS: 00007f1d1cfbe740(0000) GS:ffff91c9bdc80000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff91c900000000 CR3: 0000000006316000 CR4: 00000000000006e0
Call Trace:
<TASK>
__find_event_file+0x55/0x90
action_create+0x76c/0x1060
event_hist_trigger_parse+0x146d/0x2060
? event_trigger_write+0x31/0xd0
trigger_process_regex+0xbb/0x110
event_trigger_write+0x6b/0xd0
vfs_write+0xc8/0x3e0
? alloc_fd+0xc0/0x160
? preempt_count_add+0x4d/0xa0
? preempt_count_add+0x70/0xa0
ksys_write+0x5f/0xe0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f1d1d0cf077
Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e
fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74
RSP: 002b:00007ffcebb0e568 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000143 RCX: 00007f1d1d0cf077
RDX: 0000000000000143 RSI: 00005639265aa7e0 RDI: 0000000000000001
RBP: 00005639265aa7e0 R08: 000000000000000a R09: 0000000000000142
R
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: use quiesced elevator switch when reinitializing queues
The hctx's run_work may be racing with the elevator switch when
reinitializing hardware queues. The queue is merely frozen in this
context, but that only prevents requests from allocating and doesn't
stop the hctx work from running. The work may get an elevator pointer
that's being torn down, and can result in use-after-free errors and
kernel panics (example below). Use the quiesced elevator switch instead,
and make the previous one static since it is now only used locally.
nvme nvme0: resetting controller
nvme nvme0: 32/0/0 default/read/poll queues
BUG: kernel NULL pointer dereference, address: 0000000000000008
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 80000020c8861067 P4D 80000020c8861067 PUD 250f8c8067 PMD 0
Oops: 0000 [#1] SMP PTI
Workqueue: kblockd blk_mq_run_work_fn
RIP: 0010:kyber_has_work+0x29/0x70
...
Call Trace:
__blk_mq_do_dispatch_sched+0x83/0x2b0
__blk_mq_sched_dispatch_requests+0x12e/0x170
blk_mq_sched_dispatch_requests+0x30/0x60
__blk_mq_run_hw_queue+0x2b/0x50
process_one_work+0x1ef/0x380
worker_thread+0x2d/0x3e0 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request()
This patch fixes a shift-out-of-bounds in brcmfmac that occurs in
BIT(chiprev) when a 'chiprev' provided by the device is too large.
It should also not be equal to or greater than BITS_PER_TYPE(u32)
as we do bitwise AND with a u32 variable and BIT(chiprev). The patch
adds a check that makes the function return NULL if that is the case.
Note that the NULL case is later handled by the bus-specific caller,
brcmf_usb_probe_cb() or brcmf_usb_reset_resume(), for example.
Found by a modified version of syzkaller.
UBSAN: shift-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
shift exponent 151055786 is too large for 64-bit type 'long unsigned int'
CPU: 0 PID: 1885 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
dump_stack_lvl+0x57/0x7d
ubsan_epilogue+0x5/0x40
__ubsan_handle_shift_out_of_bounds.cold+0x53/0xdb
? lock_chain_count+0x20/0x20
brcmf_fw_alloc_request.cold+0x19/0x3ea
? brcmf_fw_get_firmwares+0x250/0x250
? brcmf_usb_ioctl_resp_wait+0x1a7/0x1f0
brcmf_usb_get_fwname+0x114/0x1a0
? brcmf_usb_reset_resume+0x120/0x120
? number+0x6c4/0x9a0
brcmf_c_process_clm_blob+0x168/0x590
? put_dec+0x90/0x90
? enable_ptr_key_workfn+0x20/0x20
? brcmf_common_pd_remove+0x50/0x50
? rcu_read_lock_sched_held+0xa1/0xd0
brcmf_c_preinit_dcmds+0x673/0xc40
? brcmf_c_set_joinpref_default+0x100/0x100
? rcu_read_lock_sched_held+0xa1/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? lock_acquire+0x19d/0x4e0
? find_held_lock+0x2d/0x110
? brcmf_usb_deq+0x1cc/0x260
? mark_held_locks+0x9f/0xe0
? lockdep_hardirqs_on_prepare+0x273/0x3e0
? _raw_spin_unlock_irqrestore+0x47/0x50
? trace_hardirqs_on+0x1c/0x120
? brcmf_usb_deq+0x1a7/0x260
? brcmf_usb_rx_fill_all+0x5a/0xf0
brcmf_attach+0x246/0xd40
? wiphy_new_nm+0x1476/0x1d50
? kmemdup+0x30/0x40
brcmf_usb_probe+0x12de/0x1690
? brcmf_usbdev_qinit.constprop.0+0x470/0x470
usb_probe_interface+0x25f/0x710
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
? usb_match_id.part.0+0x88/0xc0
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
? driver_allows_async_probing+0x120/0x120
bus_for_each_drv+0x123/0x1a0
? bus_rescan_devices+0x20/0x20
? lockdep_hardirqs_on_prepare+0x273/0x3e0
? trace_hardirqs_on+0x1c/0x120
__device_attach+0x207/0x330
? device_bind_driver+0xb0/0xb0
? kobject_uevent_env+0x230/0x12c0
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
? __mutex_unlock_slowpath+0xe7/0x660
? __fw_devlink_link_to_suppliers+0x550/0x550
usb_set_configuration+0x984/0x1770
? kernfs_create_link+0x175/0x230
usb_generic_driver_probe+0x69/0x90
usb_probe_device+0x9c/0x220
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
? driver_allows_async_probing+0x120/0x120
bus_for_each_drv+0x123/0x1a0
? bus_rescan_devices+0x20/0x20
? lockdep_hardirqs_on_prepare+0x273/0x3e0
? trace_hardirqs_on+0x1c/0x120
__device_attach+0x207/0x330
? device_bind_driver+0xb0/0xb0
? kobject_uevent_env+0x230/0x12c0
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
? __fw_devlink_link_to_suppliers+0x550/0x550
usb_new_device.cold+0x463/0xf66
? hub_disconnect+0x400/0x400
? _raw_spin_unlock_irq+0x24/0x30
hub_event+0x10d5/0x3330
? hub_port_debounce+0x280/0x280
? __lock_acquire+0x1671/0x5790
? wq_calc_node_cpumask+0x170/0x2a0
? lock_release+0x640/0x640
? rcu_read_lock_sched_held+0xa1/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? lockdep_hardirqs_on_prepare+0x273/0x3e0
process_one_work+0x873/0x13e0
? lock_release+0x640/0x640
? pwq_dec_nr_in_flight+0x320/0x320
? rwlock_bug.part.0+0x90/0x90
worker_thread+0x8b/0xd10
? __kthread_parkme+0xd9/0x1d0
? pr
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
blk-iolatency: Fix memory leak on add_disk() failures
When a gendisk is successfully initialized but add_disk() fails such as when
a loop device has invalid number of minor device numbers specified,
blkcg_init_disk() is called during init and then blkcg_exit_disk() during
error handling. Unfortunately, iolatency gets initialized in the former but
doesn't get cleaned up in the latter.
This is because, in non-error cases, the cleanup is performed by
del_gendisk() calling rq_qos_exit(), the assumption being that rq_qos
policies, iolatency being one of them, can only be activated once the disk
is fully registered and visible. That assumption is true for wbt and iocost,
but not so for iolatency as it gets initialized before add_disk() is called.
It is desirable to lazy-init rq_qos policies because they are optional
features and add to hot path overhead once initialized - each IO has to walk
all the registered rq_qos policies. So, we want to switch iolatency to lazy
init too. However, that's a bigger change. As a fix for the immediate
problem, let's just add an extra call to rq_qos_exit() in blkcg_exit_disk().
This is safe because duplicate calls to rq_qos_exit() become noop's. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()
xhci_alloc_stream_info() allocates stream context array for stream_info
->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs,
stream_info->stream_ctx_array is not released, which will lead to a
memory leak.
We can fix it by releasing the stream_info->stream_ctx_array with
xhci_free_stream_ctx() on the error path to avoid the potential memory
leak. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: qcom-adm: fix wrong sizeof config in slave_config
Fix broken slave_config function that uncorrectly compare the
peripheral_size with the size of the config pointer instead of the size
of the config struct. This cause the crci value to be ignored and cause
a kernel panic on any slave that use adm driver.
To fix this, compare to the size of the struct and NOT the size of the
pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: raspberrypi: fix possible memory leak in rpi_firmware_probe()
In rpi_firmware_probe(), if mbox_request_channel() fails, the 'fw' will
not be freed through rpi_firmware_delete(), fix this leak by calling
kfree() in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix potential null-deref in dm_resume
[Why]
Fixing smatch error:
dm_resume() error: we previously assumed 'aconnector->dc_link' could be null
[How]
Check if dc_link null at the beginning of the loop,
so further checks can be dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add()
In mpt3sas_transport_port_add(), if sas_rphy_add() returns error,
sas_rphy_free() needs be called to free the resource allocated in
sas_end_device_alloc(). Otherwise a kernel crash will happen:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108
CPU: 45 PID: 37020 Comm: bash Kdump: loaded Tainted: G W 6.1.0-rc1+ #189
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x54/0x3d0
lr : device_del+0x37c/0x3d0
Call trace:
device_del+0x54/0x3d0
attribute_container_class_device_del+0x28/0x38
transport_remove_classdev+0x6c/0x80
attribute_container_device_trigger+0x108/0x110
transport_remove_device+0x28/0x38
sas_rphy_remove+0x50/0x78 [scsi_transport_sas]
sas_port_delete+0x30/0x148 [scsi_transport_sas]
do_sas_phy_delete+0x78/0x80 [scsi_transport_sas]
device_for_each_child+0x68/0xb0
sas_remove_children+0x30/0x50 [scsi_transport_sas]
sas_rphy_remove+0x38/0x78 [scsi_transport_sas]
sas_port_delete+0x30/0x148 [scsi_transport_sas]
do_sas_phy_delete+0x78/0x80 [scsi_transport_sas]
device_for_each_child+0x68/0xb0
sas_remove_children+0x30/0x50 [scsi_transport_sas]
sas_remove_host+0x20/0x38 [scsi_transport_sas]
scsih_remove+0xd8/0x420 [mpt3sas]
Because transport_add_device() is not called when sas_rphy_add() fails, the
device is not added. When sas_rphy_remove() is subsequently called to
remove the device in the remove() path, a NULL pointer dereference happens. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix size validation for non-exclusive domains (v4)
Fix amdgpu_bo_validate_size() to check whether the TTM domain manager for the
requested memory exists, else we get a kernel oops when dereferencing "man".
v2: Make the patch standalone, i.e. not dependent on local patches.
v3: Preserve old behaviour and just check that the manager pointer is not
NULL.
v4: Complain if GTT domain requested and it is uninitialized--most likely a
bug. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]()
The ACPI buffer memory (out.pointer) returned by wmi_evaluate_method()
is not freed after the call, so it leads to memory leak.
The method results in ACPI buffer is not used, so just pass NULL to
wmi_evaluate_method() which fixes the memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: Fix PCI device refcount leak in radeon_atrm_get_bios()
As comment of pci_get_class() says, it returns a pci_device with its
refcount increased and decreased the refcount for the input parameter
@from if it is not NULL.
If we break the loop in radeon_atrm_get_bios() with 'pdev' not NULL, we
need to call pci_dev_put() to decrease the refcount. Add the missing
pci_dev_put() to avoid refcount leak. |
