| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nouveau/dmem: Fix vulnerability in migrate_to_ram upon copy error
The `nouveau_dmem_copy_one` function ensures that the copy push command is
sent to the device firmware but does not track whether it was executed
successfully.
In the case of a copy error (e.g., firmware or hardware failure), the
copy push command will be sent via the firmware channel, and
`nouveau_dmem_copy_one` will likely report success, leading to the
`migrate_to_ram` function returning a dirty HIGH_USER page to the user.
This can result in a security vulnerability, as a HIGH_USER page that may
contain sensitive or corrupted data could be returned to the user.
To prevent this vulnerability, we allocate a zero page. Thus, in case of
an error, a non-dirty (zero) page will be returned to the user. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix error path in multi-packet WQE transmit
Remove the erroneous unmap in case no DMA mapping was established
The multi-packet WQE transmit code attempts to obtain a DMA mapping for
the skb. This could fail, e.g. under memory pressure, when the IOMMU
driver just can't allocate more memory for page tables. While the code
tries to handle this in the path below the err_unmap label it erroneously
unmaps one entry from the sq's FIFO list of active mappings. Since the
current map attempt failed this unmap is removing some random DMA mapping
that might still be required. If the PCI function now presents that IOVA,
the IOMMU may assumes a rogue DMA access and e.g. on s390 puts the PCI
function in error state.
The erroneous behavior was seen in a stress-test environment that created
memory pressure. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: Return non-zero value from tipc_udp_addr2str() on error
tipc_udp_addr2str() should return non-zero value if the UDP media
address is invalid. Otherwise, a buffer overflow access can occur in
tipc_media_addr_printf(). Fix this by returning 1 on an invalid UDP
media address. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mv88e6xxx: Correct check for empty list
Since commit a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO
busses") mv88e6xxx_default_mdio_bus() has checked that the
return value of list_first_entry() is non-NULL.
This appears to be intended to guard against the list chip->mdios being
empty. However, it is not the correct check as the implementation of
list_first_entry is not designed to return NULL for empty lists.
Instead, use list_first_entry_or_null() which does return NULL if the
list is empty.
Flagged by Smatch.
Compile tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: Account for stopped queues when reading NIC stats
We now account for the fact that the NIC might send us stats for a
subset of queues. Without this change, gve_get_ethtool_stats might make
an invalid access on the priv->stats_report->stats array. |
| In the Linux kernel, the following vulnerability has been resolved:
tee: optee: Fix kernel panic caused by incorrect error handling
The error path while failing to register devices on the TEE bus has a
bug leading to kernel panic as follows:
[ 15.398930] Unable to handle kernel paging request at virtual address ffff07ed00626d7c
[ 15.406913] Mem abort info:
[ 15.409722] ESR = 0x0000000096000005
[ 15.413490] EC = 0x25: DABT (current EL), IL = 32 bits
[ 15.418814] SET = 0, FnV = 0
[ 15.421878] EA = 0, S1PTW = 0
[ 15.425031] FSC = 0x05: level 1 translation fault
[ 15.429922] Data abort info:
[ 15.432813] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 15.438310] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 15.443372] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 15.448697] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000d9e3e000
[ 15.455413] [ffff07ed00626d7c] pgd=1800000bffdf9003, p4d=1800000bffdf9003, pud=0000000000000000
[ 15.464146] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
Commit 7269cba53d90 ("tee: optee: Fix supplicant based device enumeration")
lead to the introduction of this bug. So fix it appropriately. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/buddy: Fix alloc_range() error handling code
Few users have observed display corruption when they boot
the machine to KDE Plasma or playing games. We have root
caused the problem that whenever alloc_range() couldn't
find the required memory blocks the function was returning
SUCCESS in some of the corner cases.
The right approach would be if the total allocated size
is less than the required size, the function should
return -ENOSPC. |
| In the Linux kernel, the following vulnerability has been resolved:
net: tls: handle backlogging of crypto requests
Since we're setting the CRYPTO_TFM_REQ_MAY_BACKLOG flag on our
requests to the crypto API, crypto_aead_{encrypt,decrypt} can return
-EBUSY instead of -EINPROGRESS in valid situations. For example, when
the cryptd queue for AESNI is full (easy to trigger with an
artificially low cryptd.cryptd_max_cpu_qlen), requests will be enqueued
to the backlog but still processed. In that case, the async callback
will also be called twice: first with err == -EINPROGRESS, which it
seems we can just ignore, then with err == 0.
Compared to Sabrina's original patch this version uses the new
tls_*crypt_async_wait() helpers and converts the EBUSY to
EINPROGRESS to avoid having to modify all the error handling
paths. The handling is identical. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c
Before using list_first_entry, make sure to check that list is not
empty, if list is empty return -ENODATA.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1347 kfd_create_indirect_link_prop() warn: can 'gpu_link' even be NULL?
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1428 kfd_add_peer_prop() warn: can 'iolink1' even be NULL?
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1433 kfd_add_peer_prop() warn: can 'iolink2' even be NULL? |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: Fix possible access to freed memory in link clear
After modifying the QP to the Error state, all RX WR would be completed
with WC in IB_WC_WR_FLUSH_ERR status. Current implementation does not
wait for it is done, but destroy the QP and free the link group directly.
So there is a risk that accessing the freed memory in tasklet context.
Here is a crash example:
BUG: unable to handle page fault for address: ffffffff8f220860
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD f7300e067 P4D f7300e067 PUD f7300f063 PMD 8c4e45063 PTE 800ffff08c9df060
Oops: 0002 [#1] SMP PTI
CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G S OE 5.10.0-0607+ #23
Hardware name: Inspur NF5280M4/YZMB-00689-101, BIOS 4.1.20 07/09/2018
RIP: 0010:native_queued_spin_lock_slowpath+0x176/0x1b0
Code: f3 90 48 8b 32 48 85 f6 74 f6 eb d5 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 00 c8 02 00 48 03 04 f5 00 09 98 8e <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32
RSP: 0018:ffffb3b6c001ebd8 EFLAGS: 00010086
RAX: ffffffff8f220860 RBX: 0000000000000246 RCX: 0000000000080000
RDX: ffff91db1f86c800 RSI: 000000000000173c RDI: ffff91db62bace00
RBP: ffff91db62bacc00 R08: 0000000000000000 R09: c00000010000028b
R10: 0000000000055198 R11: ffffb3b6c001ea58 R12: ffff91db80e05010
R13: 000000000000000a R14: 0000000000000006 R15: 0000000000000040
FS: 0000000000000000(0000) GS:ffff91db1f840000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffff8f220860 CR3: 00000001f9580004 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
_raw_spin_lock_irqsave+0x30/0x40
mlx5_ib_poll_cq+0x4c/0xc50 [mlx5_ib]
smc_wr_rx_tasklet_fn+0x56/0xa0 [smc]
tasklet_action_common.isra.21+0x66/0x100
__do_softirq+0xd5/0x29c
asm_call_irq_on_stack+0x12/0x20
</IRQ>
do_softirq_own_stack+0x37/0x40
irq_exit_rcu+0x9d/0xa0
sysvec_call_function_single+0x34/0x80
asm_sysvec_call_function_single+0x12/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix abort logic in btrfs_replace_file_extents
Error injection testing uncovered a case where we'd end up with a
corrupt file system with a missing extent in the middle of a file. This
occurs because the if statement to decide if we should abort is wrong.
The only way we would abort in this case is if we got a ret !=
-EOPNOTSUPP and we called from the file clone code. However the
prealloc code uses this path too. Instead we need to abort if there is
an error, and the only error we _don't_ abort on is -EOPNOTSUPP and only
if we came from the clone file code. |
| Wings is the server control plane for Pterodactyl, a free, open-source game server management panel. Prior to 1.13.0, a malformed packet received during the SFTP connection handshake causes a Go panic. This issue is fixed in version 1.13.0. |
| CoreDNS is a DNS server written in Go. From 1.9.4 until 1.14.5, a network DNS client allowed to request AXFR for a CoreDNS zone can trigger a panic when CoreDNS is configured with k8s_external headless-service zone transfers and Kubernetes contains a headless service endpoint with no declared ports; plugin/kubernetes/object/endpoint.go creates Port: -1, plugin/k8s_external/msg_to_dns.go skips that service, plugin/k8s_external/transfer.go sends an empty []dns.RR batch, and plugin/transfer/transfer.go indexes records[0] without checking the batch is non-empty. This issue is fixed in version 1.14.5. |
| Valibot helps validate data using a schema. Versions prior to 1.4.2 can throw a TypeError inside its flatten() helper when validation issues contain attacker-controlled object keys such as toString, valueOf, or hasOwnProperty. The issue is reachable through normal record() validation. record() intentionally filters __proto__, prototype, and constructor, but it still accepts other own keys that collide with inherited Object.prototype properties. If the record key schema or value schema rejects such an entry, Valibot creates an issue path containing that key. Passing the resulting issues to Valibot's documented flatten() helper causes flatErrors.nested[dotPath] to resolve to the inherited method instead of an own error array, and the helper calls .push(...) on that function. This is not a global prototype pollution issue. The impact is availability/error handling: applications that validate user-controlled objects with record() and flatten validation errors for API responses can crash the request path with a TypeError instead of returning structured validation errors. This issue has been fixed in version 1.4.2. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: fix handling of server side tls alerts
Scott Mayhew discovered a security exploit in NFS over TLS in
tls_alert_recv() due to its assumption it can read data from
the msg iterator's kvec..
kTLS implementation splits TLS non-data record payload between
the control message buffer (which includes the type such as TLS
aler or TLS cipher change) and the rest of the payload (say TLS
alert's level/description) which goes into the msg payload buffer.
This patch proposes to rework how control messages are setup and
used by sock_recvmsg().
If no control message structure is setup, kTLS layer will read and
process TLS data record types. As soon as it encounters a TLS control
message, it would return an error. At that point, NFS can setup a
kvec backed msg buffer and read in the control message such as a
TLS alert. Msg iterator can advance the kvec pointer as a part of
the copy process thus we need to revert the iterator before calling
into the tls_alert_recv. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Fix NULL pointer dereference in core_scsi3_decode_spec_i_port()
The function core_scsi3_decode_spec_i_port(), in its error code path,
unconditionally calls core_scsi3_lunacl_undepend_item() passing the
dest_se_deve pointer, which may be NULL.
This can lead to a NULL pointer dereference if dest_se_deve remains
unset.
SPC-3 PR SPEC_I_PT: Unable to locate dest_tpg
Unable to handle kernel paging request at virtual address dfff800000000012
Call trace:
core_scsi3_lunacl_undepend_item+0x2c/0xf0 [target_core_mod] (P)
core_scsi3_decode_spec_i_port+0x120c/0x1c30 [target_core_mod]
core_scsi3_emulate_pro_register+0x6b8/0xcd8 [target_core_mod]
target_scsi3_emulate_pr_out+0x56c/0x840 [target_core_mod]
Fix this by adding a NULL check before calling
core_scsi3_lunacl_undepend_item() |
| Improper Handling of Exceptional Conditions vulnerability in Erlang OTP erts (epmd) allows an unauthenticated remote attacker to permanently terminate the Erlang Port Mapper Daemon (epmd) via connection slot exhaustion.
The do_accept function in erts/epmd/src/epmd_srv.c calls epmd_cleanup_exit() when accept(2) returns EMFILE (per-process file descriptor limit reached) or ENFILE (system-wide file descriptor limit reached), rather than treating these as recoverable conditions. An attacker can exhaust epmd's file descriptor slots by holding many TCP connections open while periodically sending a single byte to reset the idle timeout, then causing accept(2) to return EMFILE, which kills the daemon. epmd has no per-source-IP connection cap, making the attack feasible from a single source.
On Debian/Ubuntu default packaging the impact is amplified: the systemd unit inherits a low file descriptor soft limit, and repeated daemon deaths trigger systemd's start-rate-limit, permanently failing both epmd.service and epmd.socket and requiring manual operator intervention to recover.
This issue affects OTP from OTP 17.0 before OTP 29.0.4, OTP 28.5.0.4 and OTP 27.3.4.15. |
| SurrealDB versions before 3.1.0 contain a denial of service vulnerability where malicious LIVE queries with WHERE clauses that evaluate to errors cause all CREATE, UPDATE, and DELETE operations on the watched table to fail. An authenticated user with only select permission can prevent write operations on a table for any user, including root, by registering a LIVE query that triggers evaluation errors until the query is killed or the session ends. |
| With NLnet Labs Unbound up to and including version 1.25.1, applications using libunbound and configured with 'unwanted-reply-threshold', could eventually be abruptly terminated if the threshold is reached and libunbound needs to call 'libworker_alloc_cleanup' since the function is absent from the function call allow list. When an application using libunbound sets 'unwanted-reply-threshold' to any non-zero value and the iterator queries an authoritative that replies with enough wrong-transaction-ID UDP datagrams to cross the threshold, the 'libworker_alloc_cleanup' will eventually be called. Since the function is absent from the function call allow list, this leads to a fatal exit of libunbound and eventual termination of the embedding application.Unbound itself is not affected since its relevant function 'worker_alloc_cleanup' is registed in the allow list and proceeds to perform the documented cache flush. |
| Symfony is a PHP framework for web and console applications and a set of reusable PHP components. Prior to 7.4.13 and 8.0.13, MailomatRequestParser::validateSignature() parsed X-MOM-Webhook-Signature as algo=signature and passed the request-selected algorithm to hash_hmac(), allowing a signature algorithm downgrade instead of enforcing Mailomat's documented SHA-256 webhook signature. This issue is fixed in versions 7.4.13 and 8.0.13. |
