| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: disable sdma ecc irq only when sdma RAS is enabled in suspend
sdma_v4_0_ip is shared on a few asics, but in sdma_v4_0_hw_fini,
driver unconditionally disables ecc_irq which is only enabled on
those asics enabling sdma ecc. This will introduce a warning in
suspend cycle on those chips with sdma ip v4.0, while without
sdma ecc. So this patch correct this.
[ 7283.166354] RIP: 0010:amdgpu_irq_put+0x45/0x70 [amdgpu]
[ 7283.167001] RSP: 0018:ffff9a5fc3967d08 EFLAGS: 00010246
[ 7283.167019] RAX: ffff98d88afd3770 RBX: 0000000000000001 RCX: 0000000000000000
[ 7283.167023] RDX: 0000000000000000 RSI: ffff98d89da30390 RDI: ffff98d89da20000
[ 7283.167025] RBP: ffff98d89da20000 R08: 0000000000036838 R09: 0000000000000006
[ 7283.167028] R10: ffffd5764243c008 R11: 0000000000000000 R12: ffff98d89da30390
[ 7283.167030] R13: ffff98d89da38978 R14: ffffffff999ae15a R15: ffff98d880130105
[ 7283.167032] FS: 0000000000000000(0000) GS:ffff98d996f00000(0000) knlGS:0000000000000000
[ 7283.167036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7283.167039] CR2: 00000000f7a9d178 CR3: 00000001c42ea000 CR4: 00000000003506e0
[ 7283.167041] Call Trace:
[ 7283.167046] <TASK>
[ 7283.167048] sdma_v4_0_hw_fini+0x38/0xa0 [amdgpu]
[ 7283.167704] amdgpu_device_ip_suspend_phase2+0x101/0x1a0 [amdgpu]
[ 7283.168296] amdgpu_device_suspend+0x103/0x180 [amdgpu]
[ 7283.168875] amdgpu_pmops_freeze+0x21/0x60 [amdgpu]
[ 7283.169464] pci_pm_freeze+0x54/0xc0 |
| In the Linux kernel, the following vulnerability has been resolved:
posix-timers: Ensure timer ID search-loop limit is valid
posix_timer_add() tries to allocate a posix timer ID by starting from the
cached ID which was stored by the last successful allocation.
This is done in a loop searching the ID space for a free slot one by
one. The loop has to terminate when the search wrapped around to the
starting point.
But that's racy vs. establishing the starting point. That is read out
lockless, which leads to the following problem:
CPU0 CPU1
posix_timer_add()
start = sig->posix_timer_id;
lock(hash_lock);
... posix_timer_add()
if (++sig->posix_timer_id < 0)
start = sig->posix_timer_id;
sig->posix_timer_id = 0;
So CPU1 can observe a negative start value, i.e. -1, and the loop break
never happens because the condition can never be true:
if (sig->posix_timer_id == start)
break;
While this is unlikely to ever turn into an endless loop as the ID space is
huge (INT_MAX), the racy read of the start value caught the attention of
KCSAN and Dmitry unearthed that incorrectness.
Rewrite it so that all id operations are under the hash lock. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: cfg80211: Pass the PMK in binary instead of hex
Apparently the hex passphrase mechanism does not work on newer
chips/firmware (e.g. BCM4387). It seems there was a simple way of
passing it in binary all along, so use that and avoid the hexification.
OpenBSD has been doing it like this from the beginning, so this should
work on all chips.
Also clear the structure before setting the PMK. This was leaking
uninitialized stack contents to the device. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9317/1: kexec: Make smp stop calls asynchronous
If a panic is triggered by a hrtimer interrupt all online cpus will be
notified and set offline. But as highlighted by commit 19dbdcb8039c
("smp: Warn on function calls from softirq context") this call should
not be made synchronous with disabled interrupts:
softdog: Initiating panic
Kernel panic - not syncing: Software Watchdog Timer expired
WARNING: CPU: 1 PID: 0 at kernel/smp.c:753 smp_call_function_many_cond
unwind_backtrace:
show_stack
dump_stack_lvl
__warn
warn_slowpath_fmt
smp_call_function_many_cond
smp_call_function
crash_smp_send_stop.part.0
machine_crash_shutdown
__crash_kexec
panic
softdog_fire
__hrtimer_run_queues
hrtimer_interrupt
Make the smp call for machine_crash_nonpanic_core() asynchronous. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Avoid lock inversion when pinning to GGTT on CHV/BXT+VTD
On completion of i915_vma_pin_ww(), a synchronous variant of
dma_fence_work_commit() is called. When pinning a VMA to GGTT address
space on a Cherry View family processor, or on a Broxton generation SoC
with VTD enabled, i.e., when stop_machine() is then called from
intel_ggtt_bind_vma(), that can potentially lead to lock inversion among
reservation_ww and cpu_hotplug locks.
[86.861179] ======================================================
[86.861193] WARNING: possible circular locking dependency detected
[86.861209] 6.15.0-rc5-CI_DRM_16515-gca0305cadc2d+ #1 Tainted: G U
[86.861226] ------------------------------------------------------
[86.861238] i915_module_loa/1432 is trying to acquire lock:
[86.861252] ffffffff83489090 (cpu_hotplug_lock){++++}-{0:0}, at: stop_machine+0x1c/0x50
[86.861290]
but task is already holding lock:
[86.861303] ffffc90002e0b4c8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915]
[86.862233]
which lock already depends on the new lock.
[86.862251]
the existing dependency chain (in reverse order) is:
[86.862265]
-> #5 (reservation_ww_class_mutex){+.+.}-{3:3}:
[86.862292] dma_resv_lockdep+0x19a/0x390
[86.862315] do_one_initcall+0x60/0x3f0
[86.862334] kernel_init_freeable+0x3cd/0x680
[86.862353] kernel_init+0x1b/0x200
[86.862369] ret_from_fork+0x47/0x70
[86.862383] ret_from_fork_asm+0x1a/0x30
[86.862399]
-> #4 (reservation_ww_class_acquire){+.+.}-{0:0}:
[86.862425] dma_resv_lockdep+0x178/0x390
[86.862440] do_one_initcall+0x60/0x3f0
[86.862454] kernel_init_freeable+0x3cd/0x680
[86.862470] kernel_init+0x1b/0x200
[86.862482] ret_from_fork+0x47/0x70
[86.862495] ret_from_fork_asm+0x1a/0x30
[86.862509]
-> #3 (&mm->mmap_lock){++++}-{3:3}:
[86.862531] down_read_killable+0x46/0x1e0
[86.862546] lock_mm_and_find_vma+0xa2/0x280
[86.862561] do_user_addr_fault+0x266/0x8e0
[86.862578] exc_page_fault+0x8a/0x2f0
[86.862593] asm_exc_page_fault+0x27/0x30
[86.862607] filldir64+0xeb/0x180
[86.862620] kernfs_fop_readdir+0x118/0x480
[86.862635] iterate_dir+0xcf/0x2b0
[86.862648] __x64_sys_getdents64+0x84/0x140
[86.862661] x64_sys_call+0x1058/0x2660
[86.862675] do_syscall_64+0x91/0xe90
[86.862689] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[86.862703]
-> #2 (&root->kernfs_rwsem){++++}-{3:3}:
[86.862725] down_write+0x3e/0xf0
[86.862738] kernfs_add_one+0x30/0x3c0
[86.862751] kernfs_create_dir_ns+0x53/0xb0
[86.862765] internal_create_group+0x134/0x4c0
[86.862779] sysfs_create_group+0x13/0x20
[86.862792] topology_add_dev+0x1d/0x30
[86.862806] cpuhp_invoke_callback+0x4b5/0x850
[86.862822] cpuhp_issue_call+0xbf/0x1f0
[86.862836] __cpuhp_setup_state_cpuslocked+0x111/0x320
[86.862852] __cpuhp_setup_state+0xb0/0x220
[86.862866] topology_sysfs_init+0x30/0x50
[86.862879] do_one_initcall+0x60/0x3f0
[86.862893] kernel_init_freeable+0x3cd/0x680
[86.862908] kernel_init+0x1b/0x200
[86.862921] ret_from_fork+0x47/0x70
[86.862934] ret_from_fork_asm+0x1a/0x30
[86.862947]
-> #1 (cpuhp_state_mutex){+.+.}-{3:3}:
[86.862969] __mutex_lock+0xaa/0xed0
[86.862982] mutex_lock_nested+0x1b/0x30
[86.862995] __cpuhp_setup_state_cpuslocked+0x67/0x320
[86.863012] __cpuhp_setup_state+0xb0/0x220
[86.863026] page_alloc_init_cpuhp+0x2d/0x60
[86.863041] mm_core_init+0x22/0x2d0
[86.863054] start_kernel+0x576/0xbd0
[86.863068] x86_64_start_reservations+0x18/0x30
[86.863084] x86_64_start_kernel+0xbf/0x110
[86.863098] common_startup_64+0x13e/0x141
[86.863114]
-> #0 (cpu_hotplug_lock){++++}-{0:0}:
[86.863135] __lock_acquire+0x16
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Input: pegasus-notetaker - fix potential out-of-bounds access
In the pegasus_notetaker driver, the pegasus_probe() function allocates
the URB transfer buffer using the wMaxPacketSize value from
the endpoint descriptor. An attacker can use a malicious USB descriptor
to force the allocation of a very small buffer.
Subsequently, if the device sends an interrupt packet with a specific
pattern (e.g., where the first byte is 0x80 or 0x42),
the pegasus_parse_packet() function parses the packet without checking
the allocated buffer size. This leads to an out-of-bounds memory access. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/hdmi: Fix breakage at probing nvhdmi-mcp driver
After restructuring and splitting the HDMI codec driver code, each
HDMI codec driver contains the own build_controls and build_pcms ops.
A copy-n-paste error put the wrong entries for nvhdmi-mcp driver; both
build_controls and build_pcms are swapped. Unfortunately both
callbacks have the very same form, and the compiler didn't complain
it, either. This resulted in a NULL dereference because the PCM
instance hasn't been initialized at calling the build_controls
callback.
Fix it by passing the proper entries. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Add bpf_prog_run_data_pointers()
syzbot found that cls_bpf_classify() is able to change
tc_skb_cb(skb)->drop_reason triggering a warning in sk_skb_reason_drop().
WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 __sk_skb_reason_drop net/core/skbuff.c:1189 [inline]
WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 sk_skb_reason_drop+0x76/0x170 net/core/skbuff.c:1214
struct tc_skb_cb has been added in commit ec624fe740b4 ("net/sched:
Extend qdisc control block with tc control block"), which added a wrong
interaction with db58ba459202 ("bpf: wire in data and data_end for
cls_act_bpf").
drop_reason was added later.
Add bpf_prog_run_data_pointers() helper to save/restore the net_sched
storage colliding with BPF data_meta/data_end. |
| In the Linux kernel, the following vulnerability has been resolved:
posix-timers: Plug potential memory leak in do_timer_create()
When posix timer creation is set to allocate a given timer ID and the
access to the user space value faults, the function terminates without
freeing the already allocated posix timer structure.
Move the allocation after the user space access to cure that.
[ tglx: Massaged change log ] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Cache streams targeting link when performing LT automation
[WHY]
Last LT automation update can cause crash by referencing current_state and
calling into dc_update_planes_and_stream which may clobber current_state.
[HOW]
Cache relevant stream pointers and iterate through them instead of relying
on the current_state. |
| In the Linux kernel, the following vulnerability has been resolved:
media: stm32-csi: Fix dereference before NULL check
In 'stm32_csi_start', 'csidev->s_subdev' is dereferenced directly while
assigning a value to the 'src_pad'. However the same value is being
checked against NULL at a later point of time indicating that there
are chances that the value can be NULL.
Move the dereference after the NULL check. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: audioreach: fix potential null pointer dereference
It is possible that the topology parsing function
audioreach_widget_load_module_common() could return NULL or an error
pointer. Add missing NULL check so that we do not dereference it. |
| In the Linux kernel, the following vulnerability has been resolved:
hwrng: ks-sa - fix division by zero in ks_sa_rng_init
Fix division by zero in ks_sa_rng_init caused by missing clock
pointer initialization. The clk_get_rate() call is performed on
an uninitialized clk pointer, resulting in division by zero when
calculating delay values.
Add clock initialization code before using the clock.
drivers/char/hw_random/ks-sa-rng.c | 7 +++++++
1 file changed, 7 insertions(+) |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up
The function ring_buffer_map_get_reader() is a bit more strict than the
other get reader functions, and except for certain situations the
rb_get_reader_page() should not return NULL. If it does, it triggers a
warning.
This warning was triggering but after looking at why, it was because
another acceptable situation was happening and it wasn't checked for.
If the reader catches up to the writer and there's still data to be read
on the reader page, then the rb_get_reader_page() will return NULL as
there's no new page to get.
In this situation, the reader page should not be updated and no warning
should trigger. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: fix possible deadlock while configuring policy
Following deadlock can be triggered easily by lockdep:
WARNING: possible circular locking dependency detected
6.17.0-rc3-00124-ga12c2658ced0 #1665 Not tainted
------------------------------------------------------
check/1334 is trying to acquire lock:
ff1100011d9d0678 (&q->sysfs_lock){+.+.}-{4:4}, at: blk_unregister_queue+0x53/0x180
but task is already holding lock:
ff1100011d9d00e0 (&q->q_usage_counter(queue)#3){++++}-{0:0}, at: del_gendisk+0xba/0x110
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&q->q_usage_counter(queue)#3){++++}-{0:0}:
blk_queue_enter+0x40b/0x470
blkg_conf_prep+0x7b/0x3c0
tg_set_limit+0x10a/0x3e0
cgroup_file_write+0xc6/0x420
kernfs_fop_write_iter+0x189/0x280
vfs_write+0x256/0x490
ksys_write+0x83/0x190
__x64_sys_write+0x21/0x30
x64_sys_call+0x4608/0x4630
do_syscall_64+0xdb/0x6b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (&q->rq_qos_mutex){+.+.}-{4:4}:
__mutex_lock+0xd8/0xf50
mutex_lock_nested+0x2b/0x40
wbt_init+0x17e/0x280
wbt_enable_default+0xe9/0x140
blk_register_queue+0x1da/0x2e0
__add_disk+0x38c/0x5d0
add_disk_fwnode+0x89/0x250
device_add_disk+0x18/0x30
virtblk_probe+0x13a3/0x1800
virtio_dev_probe+0x389/0x610
really_probe+0x136/0x620
__driver_probe_device+0xb3/0x230
driver_probe_device+0x2f/0xe0
__driver_attach+0x158/0x250
bus_for_each_dev+0xa9/0x130
driver_attach+0x26/0x40
bus_add_driver+0x178/0x3d0
driver_register+0x7d/0x1c0
__register_virtio_driver+0x2c/0x60
virtio_blk_init+0x6f/0xe0
do_one_initcall+0x94/0x540
kernel_init_freeable+0x56a/0x7b0
kernel_init+0x2b/0x270
ret_from_fork+0x268/0x4c0
ret_from_fork_asm+0x1a/0x30
-> #0 (&q->sysfs_lock){+.+.}-{4:4}:
__lock_acquire+0x1835/0x2940
lock_acquire+0xf9/0x450
__mutex_lock+0xd8/0xf50
mutex_lock_nested+0x2b/0x40
blk_unregister_queue+0x53/0x180
__del_gendisk+0x226/0x690
del_gendisk+0xba/0x110
sd_remove+0x49/0xb0 [sd_mod]
device_remove+0x87/0xb0
device_release_driver_internal+0x11e/0x230
device_release_driver+0x1a/0x30
bus_remove_device+0x14d/0x220
device_del+0x1e1/0x5a0
__scsi_remove_device+0x1ff/0x2f0
scsi_remove_device+0x37/0x60
sdev_store_delete+0x77/0x100
dev_attr_store+0x1f/0x40
sysfs_kf_write+0x65/0x90
kernfs_fop_write_iter+0x189/0x280
vfs_write+0x256/0x490
ksys_write+0x83/0x190
__x64_sys_write+0x21/0x30
x64_sys_call+0x4608/0x4630
do_syscall_64+0xdb/0x6b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
other info that might help us debug this:
Chain exists of:
&q->sysfs_lock --> &q->rq_qos_mutex --> &q->q_usage_counter(queue)#3
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&q->q_usage_counter(queue)#3);
lock(&q->rq_qos_mutex);
lock(&q->q_usage_counter(queue)#3);
lock(&q->sysfs_lock);
Root cause is that queue_usage_counter is grabbed with rq_qos_mutex
held in blkg_conf_prep(), while queue should be freezed before
rq_qos_mutex from other context.
The blk_queue_enter() from blkg_conf_prep() is used to protect against
policy deactivation, which is already protected with blkcg_mutex, hence
convert blk_queue_enter() to blkcg_mutex to fix this problem. Meanwhile,
consider that blkcg_mutex is held after queue is freezed from policy
deactivation, also convert blkg_alloc() to use GFP_NOIO. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix memory leak of qgroup_list in btrfs_add_qgroup_relation
When btrfs_add_qgroup_relation() is called with invalid qgroup levels
(src >= dst), the function returns -EINVAL directly without freeing the
preallocated qgroup_list structure passed by the caller. This causes a
memory leak because the caller unconditionally sets the pointer to NULL
after the call, preventing any cleanup.
The issue occurs because the level validation check happens before the
mutex is acquired and before any error handling path that would free
the prealloc pointer. On this early return, the cleanup code at the
'out' label (which includes kfree(prealloc)) is never reached.
In btrfs_ioctl_qgroup_assign(), the code pattern is:
prealloc = kzalloc(sizeof(*prealloc), GFP_KERNEL);
ret = btrfs_add_qgroup_relation(trans, sa->src, sa->dst, prealloc);
prealloc = NULL; // Always set to NULL regardless of return value
...
kfree(prealloc); // This becomes kfree(NULL), does nothing
When the level check fails, 'prealloc' is never freed by either the
callee or the caller, resulting in a 64-byte memory leak per failed
operation. This can be triggered repeatedly by an unprivileged user
with access to a writable btrfs mount, potentially exhausting kernel
memory.
Fix this by freeing prealloc before the early return, ensuring prealloc
is always freed on all error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: Implement settime64 with -EOPNOTSUPP
ptp_clock_settime() assumes every ptp_clock has implemented settime64().
Stub it with -EOPNOTSUPP to prevent a NULL dereference.
The fix is similar to commit 329d050bbe63 ("gve: Implement settime64
with -EOPNOTSUPP"). |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix scx_enable() crash on helper kthread creation failure
A crash was observed when the sched_ext selftests runner was
terminated with Ctrl+\ while test 15 was running:
NIP [c00000000028fa58] scx_enable.constprop.0+0x358/0x12b0
LR [c00000000028fa2c] scx_enable.constprop.0+0x32c/0x12b0
Call Trace:
scx_enable.constprop.0+0x32c/0x12b0 (unreliable)
bpf_struct_ops_link_create+0x18c/0x22c
__sys_bpf+0x23f8/0x3044
sys_bpf+0x2c/0x6c
system_call_exception+0x124/0x320
system_call_vectored_common+0x15c/0x2ec
kthread_run_worker() returns an ERR_PTR() on failure rather than NULL,
but the current code in scx_alloc_and_add_sched() only checks for a NULL
helper. Incase of failure on SIGQUIT, the error is not handled in
scx_alloc_and_add_sched() and scx_enable() ends up dereferencing an
error pointer.
Error handling is fixed in scx_alloc_and_add_sched() to propagate
PTR_ERR() into ret, so that scx_enable() jumps to the existing error
path, avoiding random dereference on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix memory leak in __blkdev_issue_zero_pages
Move the fatal signal check before bio_alloc() to prevent a memory
leak when BLKDEV_ZERO_KILLABLE is set and a fatal signal is pending.
Previously, the bio was allocated before checking for a fatal signal.
If a signal was pending, the code would break out of the loop without
freeing or chaining the just-allocated bio, causing a memory leak.
This matches the pattern already used in __blkdev_issue_write_zeroes()
where the signal check precedes the allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: cadence: Check for the existence of cdns_pcie::ops before using it
cdns_pcie::ops might not be populated by all the Cadence glue drivers. This
is going to be true for the upcoming Sophgo platform which doesn't set the
ops.
Hence, add a check to prevent NULL pointer dereference.
[mani: reworded subject and description] |
