| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix debug checking for np-guests using huge mappings
When running with transparent huge pages and CONFIG_NVHE_EL2_DEBUG then
the debug checking in assert_host_shared_guest() fails on the launch of an
np-guest. This WARN_ON() causes a panic and generates the stack below.
In __pkvm_host_relax_perms_guest() the debug checking assumes the mapping
is a single page but it may be a block map. Update the checking so that
the size is not checked and just assumes the correct size.
While we're here make the same fix in __pkvm_host_mkyoung_guest().
Info: # lkvm run -k /share/arch/arm64/boot/Image -m 704 -c 8 --name guest-128
Info: Removed ghost socket file "/.lkvm//guest-128.sock".
[ 1406.521757] kvm [141]: nVHE hyp BUG at: arch/arm64/kvm/hyp/nvhe/mem_protect.c:1088!
[ 1406.521804] kvm [141]: nVHE call trace:
[ 1406.521828] kvm [141]: [<ffff8000811676b4>] __kvm_nvhe_hyp_panic+0xb4/0xe8
[ 1406.521946] kvm [141]: [<ffff80008116d12c>] __kvm_nvhe_assert_host_shared_guest+0xb0/0x10c
[ 1406.522049] kvm [141]: [<ffff80008116f068>] __kvm_nvhe___pkvm_host_relax_perms_guest+0x48/0x104
[ 1406.522157] kvm [141]: [<ffff800081169df8>] __kvm_nvhe_handle___pkvm_host_relax_perms_guest+0x64/0x7c
[ 1406.522250] kvm [141]: [<ffff800081169f0c>] __kvm_nvhe_handle_trap+0x8c/0x1a8
[ 1406.522333] kvm [141]: [<ffff8000811680fc>] __kvm_nvhe___skip_pauth_save+0x4/0x4
[ 1406.522454] kvm [141]: ---[ end nVHE call trace ]---
[ 1406.522477] kvm [141]: Hyp Offset: 0xfffece8013600000
[ 1406.522554] Kernel panic - not syncing: HYP panic:
[ 1406.522554] PS:834003c9 PC:0000b1806db6d170 ESR:00000000f2000800
[ 1406.522554] FAR:ffff8000804be420 HPFAR:0000000000804be0 PAR:0000000000000000
[ 1406.522554] VCPU:0000000000000000
[ 1406.523337] CPU: 3 UID: 0 PID: 141 Comm: kvm-vcpu-0 Not tainted 6.16.0-rc7 #97 PREEMPT
[ 1406.523485] Hardware name: FVP Base RevC (DT)
[ 1406.523566] Call trace:
[ 1406.523629] show_stack+0x18/0x24 (C)
[ 1406.523753] dump_stack_lvl+0xd4/0x108
[ 1406.523899] dump_stack+0x18/0x24
[ 1406.524040] panic+0x3d8/0x448
[ 1406.524184] nvhe_hyp_panic_handler+0x10c/0x23c
[ 1406.524325] kvm_handle_guest_abort+0x68c/0x109c
[ 1406.524500] handle_exit+0x60/0x17c
[ 1406.524630] kvm_arch_vcpu_ioctl_run+0x2e0/0x8c0
[ 1406.524794] kvm_vcpu_ioctl+0x1a8/0x9cc
[ 1406.524919] __arm64_sys_ioctl+0xac/0x104
[ 1406.525067] invoke_syscall+0x48/0x10c
[ 1406.525189] el0_svc_common.constprop.0+0x40/0xe0
[ 1406.525322] do_el0_svc+0x1c/0x28
[ 1406.525441] el0_svc+0x38/0x120
[ 1406.525588] el0t_64_sync_handler+0x10c/0x138
[ 1406.525750] el0t_64_sync+0x1ac/0x1b0
[ 1406.525876] SMP: stopping secondary CPUs
[ 1406.525965] Kernel Offset: disabled
[ 1406.526032] CPU features: 0x0000,00000080,8e134ca1,9446773f
[ 1406.526130] Memory Limit: none
[ 1406.959099] ---[ end Kernel panic - not syncing: HYP panic:
[ 1406.959099] PS:834003c9 PC:0000b1806db6d170 ESR:00000000f2000800
[ 1406.959099] FAR:ffff8000804be420 HPFAR:0000000000804be0 PAR:0000000000000000
[ 1406.959099] VCPU:0000000000000000 ] |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kvm: Force legacy PCI hole to UC when overriding MTRRs for TDX/SNP
When running as an SNP or TDX guest under KVM, force the legacy PCI hole,
i.e. memory between Top of Lower Usable DRAM and 4GiB, to be mapped as UC
via a forced variable MTRR range.
In most KVM-based setups, legacy devices such as the HPET and TPM are
enumerated via ACPI. ACPI enumeration includes a Memory32Fixed entry, and
optionally a SystemMemory descriptor for an OperationRegion, e.g. if the
device needs to be accessed via a Control Method.
If a SystemMemory entry is present, then the kernel's ACPI driver will
auto-ioremap the region so that it can be accessed at will. However, the
ACPI spec doesn't provide a way to enumerate the memory type of
SystemMemory regions, i.e. there's no way to tell software that a region
must be mapped as UC vs. WB, etc. As a result, Linux's ACPI driver always
maps SystemMemory regions using ioremap_cache(), i.e. as WB on x86.
The dedicated device drivers however, e.g. the HPET driver and TPM driver,
want to map their associated memory as UC or WC, as accessing PCI devices
using WB is unsupported.
On bare metal and non-CoCO, the conflicting requirements "work" as firmware
configures the PCI hole (and other device memory) to be UC in the MTRRs.
So even though the ACPI mappings request WB, they are forced to UC- in the
kernel's tracking due to the kernel properly handling the MTRR overrides,
and thus are compatible with the drivers' requested WC/UC-.
With force WB MTRRs on SNP and TDX guests, the ACPI mappings get their
requested WB if the ACPI mappings are established before the dedicated
driver code attempts to initialize the device. E.g. if acpi_init()
runs before the corresponding device driver is probed, ACPI's WB mapping
will "win", and result in the driver's ioremap() failing because the
existing WB mapping isn't compatible with the requested WC/UC-.
E.g. when a TPM is emulated by the hypervisor (ignoring the security
implications of relying on what is allegedly an untrusted entity to store
measurements), the TPM driver will request UC and fail:
[ 1.730459] ioremap error for 0xfed40000-0xfed45000, requested 0x2, got 0x0
[ 1.732780] tpm_tis MSFT0101:00: probe with driver tpm_tis failed with error -12
Note, the '0x2' and '0x0' values refer to "enum page_cache_mode", not x86's
memtypes (which frustratingly are an almost pure inversion; 2 == WB, 0 == UC).
E.g. tracing mapping requests for TPM TIS yields:
Mapping TPM TIS with req_type = 0
WARNING: CPU: 22 PID: 1 at arch/x86/mm/pat/memtype.c:530 memtype_reserve+0x2ab/0x460
Modules linked in:
CPU: 22 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.16.0-rc7+ #2 VOLUNTARY
Tainted: [W]=WARN
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/29/2025
RIP: 0010:memtype_reserve+0x2ab/0x460
__ioremap_caller+0x16d/0x3d0
ioremap_cache+0x17/0x30
x86_acpi_os_ioremap+0xe/0x20
acpi_os_map_iomem+0x1f3/0x240
acpi_os_map_memory+0xe/0x20
acpi_ex_system_memory_space_handler+0x273/0x440
acpi_ev_address_space_dispatch+0x176/0x4c0
acpi_ex_access_region+0x2ad/0x530
acpi_ex_field_datum_io+0xa2/0x4f0
acpi_ex_extract_from_field+0x296/0x3e0
acpi_ex_read_data_from_field+0xd1/0x460
acpi_ex_resolve_node_to_value+0x2ee/0x530
acpi_ex_resolve_to_value+0x1f2/0x540
acpi_ds_evaluate_name_path+0x11b/0x190
acpi_ds_exec_end_op+0x456/0x960
acpi_ps_parse_loop+0x27a/0xa50
acpi_ps_parse_aml+0x226/0x600
acpi_ps_execute_method+0x172/0x3e0
acpi_ns_evaluate+0x175/0x5f0
acpi_evaluate_object+0x213/0x490
acpi_evaluate_integer+0x6d/0x140
acpi_bus_get_status+0x93/0x150
acpi_add_single_object+0x43a/0x7c0
acpi_bus_check_add+0x149/0x3a0
acpi_bus_check_add_1+0x16/0x30
acpi_ns_walk_namespace+0x22c/0x360
acpi_walk_namespace+0x15c/0x170
acpi_bus_scan+0x1dd/0x200
acpi_scan_init+0xe5/0x2b0
acpi_init+0x264/0x5b0
do_one_i
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
pid: Add a judgment for ns null in pid_nr_ns
__task_pid_nr_ns
ns = task_active_pid_ns(current);
pid_nr_ns(rcu_dereference(*task_pid_ptr(task, type)), ns);
if (pid && ns->level <= pid->level) {
Sometimes null is returned for task_active_pid_ns. Then it will trigger kernel panic in pid_nr_ns.
For example:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058
Mem abort info:
ESR = 0x0000000096000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x07: level 3 translation fault
Data abort info:
ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 39-bit VAs, pgdp=00000002175aa000
[0000000000000058] pgd=08000002175ab003, p4d=08000002175ab003, pud=08000002175ab003, pmd=08000002175be003, pte=0000000000000000
pstate: 834000c5 (Nzcv daIF +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : __task_pid_nr_ns+0x74/0xd0
lr : __task_pid_nr_ns+0x24/0xd0
sp : ffffffc08001bd10
x29: ffffffc08001bd10 x28: ffffffd4422b2000 x27: 0000000000000001
x26: ffffffd442821168 x25: ffffffd442821000 x24: 00000f89492eab31
x23: 00000000000000c0 x22: ffffff806f5693c0 x21: ffffff806f5693c0
x20: 0000000000000001 x19: 0000000000000000 x18: 0000000000000000
x17: 00000000529c6ef0 x16: 00000000529c6ef0 x15: 00000000023a1adc
x14: 0000000000000003 x13: 00000000007ef6d8 x12: 001167c391c78800
x11: 00ffffffffffffff x10: 0000000000000000 x9 : 0000000000000001
x8 : ffffff80816fa3c0 x7 : 0000000000000000 x6 : 49534d702d535449
x5 : ffffffc080c4c2c0 x4 : ffffffd43ee128c8 x3 : ffffffd43ee124dc
x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffffff806f5693c0
Call trace:
__task_pid_nr_ns+0x74/0xd0
...
__handle_irq_event_percpu+0xd4/0x284
handle_irq_event+0x48/0xb0
handle_fasteoi_irq+0x160/0x2d8
generic_handle_domain_irq+0x44/0x60
gic_handle_irq+0x4c/0x114
call_on_irq_stack+0x3c/0x74
do_interrupt_handler+0x4c/0x84
el1_interrupt+0x34/0x58
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x68/0x6c
account_kernel_stack+0x60/0x144
exit_task_stack_account+0x1c/0x80
do_exit+0x7e4/0xaf8
...
get_signal+0x7bc/0x8d8
do_notify_resume+0x128/0x828
el0_svc+0x6c/0x70
el0t_64_sync_handler+0x68/0xbc
el0t_64_sync+0x1a8/0x1ac
Code: 35fffe54 911a02a8 f9400108 b4000128 (b9405a69)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
accel/qaic: Fix bootlog initialization ordering
As soon as we queue MHI buffers to receive the bootlog from the device,
we could be receiving data. Therefore all the resources needed to
process that data need to be setup prior to queuing the buffers.
We currently initialize some of the resources after queuing the buffers
which creates a race between the probe() and any data that comes back
from the device. If the uninitialized resources are accessed, we could
see page faults.
Fix the init ordering to close the race. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: cleanup remaining SKBs in PTP flows
When the driver requests Tx timestamp value, one of the first steps is
to clone SKB using skb_get. It increases the reference counter for that
SKB to prevent unexpected freeing by another component.
However, there may be a case where the index is requested, SKB is
assigned and never consumed by PTP flows - for example due to reset during
running PTP apps.
Add a check in release timestamping function to verify if the SKB
assigned to Tx timestamp latch was freed, and release remaining SKBs. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Account for failed debug initialization
When the SCMI debug subsystem fails to initialize, the related debug root
will be missing, and the underlying descriptor will be NULL.
Handle this fault condition in the SCMI debug helpers that maintain
metrics counters. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: zynqmp-ipi: Fix SGI cleanup on unbind
The driver incorrectly determines SGI vs SPI interrupts by checking IRQ
number < 16, which fails with dynamic IRQ allocation. During unbind,
this causes improper SGI cleanup leading to kernel crash.
Add explicit irq_type field to pdata for reliable identification of SGI
interrupts (type-2) and only clean up SGI resources when appropriate. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix bootup splat with separate_gpu_drm modparam
The drm_gem_for_each_gpuvm_bo() call from lookup_vma() accesses
drm_gem_obj.gpuva.list, which is not initialized when the drm driver
does not support DRIVER_GEM_GPUVA feature. Enable it for msm_kms
drm driver to fix the splat seen when msm.separate_gpu_drm=1 modparam
is set:
[ 9.506020] Unable to handle kernel paging request at virtual address fffffffffffffff0
[ 9.523160] Mem abort info:
[ 9.523161] ESR = 0x0000000096000006
[ 9.523163] EC = 0x25: DABT (current EL), IL = 32 bits
[ 9.523165] SET = 0, FnV = 0
[ 9.523166] EA = 0, S1PTW = 0
[ 9.523167] FSC = 0x06: level 2 translation fault
[ 9.523169] Data abort info:
[ 9.523170] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
[ 9.523171] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 9.523172] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 9.523174] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000ad370f000
[ 9.523176] [fffffffffffffff0] pgd=0000000000000000, p4d=0000000ad4787403, pud=0000000ad4788403, pmd=0000000000000000
[ 9.523184] Internal error: Oops: 0000000096000006 [#1] SMP
[ 9.592968] CPU: 9 UID: 0 PID: 448 Comm: (udev-worker) Not tainted 6.17.0-rc4-assorted-fix-00005-g0e9bb53a2282-dirty #3 PREEMPT
[ 9.592970] Hardware name: Qualcomm CRD, BIOS 6.0.240718.BOOT.MXF.2.4-00515-HAMOA-1 07/18/2024
[ 9.592971] pstate: a1400005 (NzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 9.592973] pc : lookup_vma+0x28/0xe0 [msm]
[ 9.592996] lr : get_vma_locked+0x2c/0x128 [msm]
[ 9.763632] sp : ffff800082dab460
[ 9.763666] Call trace:
[ 9.763668] lookup_vma+0x28/0xe0 [msm] (P)
[ 9.763688] get_vma_locked+0x2c/0x128 [msm]
[ 9.763706] msm_gem_get_and_pin_iova_range+0x68/0x11c [msm]
[ 9.763723] msm_gem_get_and_pin_iova+0x18/0x24 [msm]
[ 9.763740] msm_fbdev_driver_fbdev_probe+0xd0/0x258 [msm]
[ 9.763760] __drm_fb_helper_initial_config_and_unlock+0x288/0x528 [drm_kms_helper]
[ 9.763771] drm_fb_helper_initial_config+0x44/0x54 [drm_kms_helper]
[ 9.763779] drm_fbdev_client_hotplug+0x84/0xd4 [drm_client_lib]
[ 9.763782] drm_client_register+0x58/0x9c [drm]
[ 9.763806] drm_fbdev_client_setup+0xe8/0xcf0 [drm_client_lib]
[ 9.763809] drm_client_setup+0xb4/0xd8 [drm_client_lib]
[ 9.763811] msm_drm_kms_post_init+0x2c/0x3c [msm]
[ 9.763830] msm_drm_init+0x1a8/0x22c [msm]
[ 9.763848] msm_drm_bind+0x30/0x3c [msm]
[ 9.919273] try_to_bring_up_aggregate_device+0x168/0x1d4
[ 9.919283] __component_add+0xa4/0x170
[ 9.919286] component_add+0x14/0x20
[ 9.919288] msm_dp_display_probe_tail+0x4c/0xac [msm]
[ 9.919315] msm_dp_auxbus_done_probe+0x14/0x20 [msm]
[ 9.919335] dp_aux_ep_probe+0x4c/0xf0 [drm_dp_aux_bus]
[ 9.919341] really_probe+0xbc/0x298
[ 9.919345] __driver_probe_device+0x78/0x12c
[ 9.919348] driver_probe_device+0x40/0x160
[ 9.919350] __driver_attach+0x94/0x19c
[ 9.919353] bus_for_each_dev+0x74/0xd4
[ 9.919355] driver_attach+0x24/0x30
[ 9.919358] bus_add_driver+0xe4/0x208
[ 9.919360] driver_register+0x60/0x128
[ 9.919363] __dp_aux_dp_driver_register+0x24/0x30 [drm_dp_aux_bus]
[ 9.919365] atana33xc20_init+0x20/0x1000 [panel_samsung_atna33xc20]
[ 9.919370] do_one_initcall+0x6c/0x1b0
[ 9.919374] do_init_module+0x58/0x234
[ 9.919377] load_module+0x19cc/0x1bd4
[ 9.919380] init_module_from_file+0x84/0xc4
[ 9.919382] __arm64_sys_finit_module+0x1b8/0x2cc
[ 9.919384] invoke_syscall+0x48/0x110
[ 9.919389] el0_svc_common.constprop.0+0xc8/0xe8
[ 9.919393] do_el0_svc+0x20/0x2c
[ 9.919396] el0_svc+0x34/0xf0
[ 9.919401] el0t_64_sync_handler+0xa0/0xe4
[ 9.919403] el0t_64_sync+0x198/0x19c
[ 9.919407] Code: eb0000bf 54000480 d100a003 aa0303e2 (f8418c44)
[ 9.919410] ---[ end trace 0000000000000000 ]---
Patchwork: https://patchwork.freedesktop.org/pa
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/pwrctrl: Fix double cleanup on devm_add_action_or_reset() failure
When devm_add_action_or_reset() fails, it calls the passed cleanup
function. Hence the caller must not repeat that cleanup.
Replace the "goto err_regulator_free" by the actual freeing, as there
will never be a need again for a second user of this label. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: sof_sdw: Prevent jump to NULL add_sidecar callback
In create_sdw_dailink() check that sof_end->codec_info->add_sidecar
is not NULL before calling it.
The original code assumed that if include_sidecar is true, the codec
on that link has an add_sidecar callback. But there could be other
codecs on the same link that do not have an add_sidecar callback. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Fix IA32_PMC_x_CFG_B MSRs access error
When running perf_fuzzer on PTL, sometimes the below "unchecked MSR
access error" is seen when accessing IA32_PMC_x_CFG_B MSRs.
[ 55.611268] unchecked MSR access error: WRMSR to 0x1986 (tried to write 0x0000000200000001) at rIP: 0xffffffffac564b28 (native_write_msr+0x8/0x30)
[ 55.611280] Call Trace:
[ 55.611282] <TASK>
[ 55.611284] ? intel_pmu_config_acr+0x87/0x160
[ 55.611289] intel_pmu_enable_acr+0x6d/0x80
[ 55.611291] intel_pmu_enable_event+0xce/0x460
[ 55.611293] x86_pmu_start+0x78/0xb0
[ 55.611297] x86_pmu_enable+0x218/0x3a0
[ 55.611300] ? x86_pmu_enable+0x121/0x3a0
[ 55.611302] perf_pmu_enable+0x40/0x50
[ 55.611307] ctx_resched+0x19d/0x220
[ 55.611309] __perf_install_in_context+0x284/0x2f0
[ 55.611311] ? __pfx_remote_function+0x10/0x10
[ 55.611314] remote_function+0x52/0x70
[ 55.611317] ? __pfx_remote_function+0x10/0x10
[ 55.611319] generic_exec_single+0x84/0x150
[ 55.611323] smp_call_function_single+0xc5/0x1a0
[ 55.611326] ? __pfx_remote_function+0x10/0x10
[ 55.611329] perf_install_in_context+0xd1/0x1e0
[ 55.611331] ? __pfx___perf_install_in_context+0x10/0x10
[ 55.611333] __do_sys_perf_event_open+0xa76/0x1040
[ 55.611336] __x64_sys_perf_event_open+0x26/0x30
[ 55.611337] x64_sys_call+0x1d8e/0x20c0
[ 55.611339] do_syscall_64+0x4f/0x120
[ 55.611343] entry_SYSCALL_64_after_hwframe+0x76/0x7e
On PTL, GP counter 0 and 1 doesn't support auto counter reload feature,
thus it would trigger a #GP when trying to write 1 on bit 0 of CFG_B MSR
which requires to enable auto counter reload on GP counter 0.
The root cause of causing this issue is the check for auto counter
reload (ACR) counter mask from user space is incorrect in
intel_pmu_acr_late_setup() helper. It leads to an invalid ACR counter
mask from user space could be set into hw.config1 and then written into
CFG_B MSRs and trigger the MSR access warning.
e.g., User may create a perf event with ACR counter mask (config2=0xcb),
and there is only 1 event created, so "cpuc->n_events" is 1.
The correct check condition should be "i + idx >= cpuc->n_events"
instead of "i + idx > cpuc->n_events" (it looks a typo). Otherwise,
the counter mask would traverse twice and an invalid "cpuc->assign[1]"
bit (bit 0) is set into hw.config1 and cause MSR accessing error.
Besides, also check if the ACR counter mask corresponding events are
ACR events. If not, filter out these counter mask. If a event is not a
ACR event, it could be scheduled to an HW counter which doesn't support
ACR. It's invalid to add their counter index in ACR counter mask.
Furthermore, remove the WARN_ON_ONCE() since it's easily triggered as
user could set any invalid ACR counter mask and the warning message
could mislead users. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: bytcr_rt5651: Fix invalid quirk input mapping
When an invalid value is passed via quirk option, currently
bytcr_rt5640 driver just ignores and leaves as is, which may lead to
unepxected results like OOB access.
This patch adds the sanity check and corrects the input mapping to the
certain default value if an invalid value is passed. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe
The state->timer is a cyclic timer that schedules work_i2c_poll and
delayed_work_enable_hotplug, while rearming itself. Using timer_delete()
fails to guarantee the timer isn't still running when destroyed, similarly
cancel_delayed_work() cannot ensure delayed_work_enable_hotplug has
terminated if already executing. During probe failure after timer
initialization, these may continue running as orphans and reference the
already-freed tc358743_state object through tc358743_irq_poll_timer.
The following is the trace captured by KASAN.
BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0
Write of size 8 at addr ffff88800ded83c8 by task swapper/1/0
...
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_report+0xcf/0x610
? __pfx_sched_balance_find_src_group+0x10/0x10
? __run_timer_base.part.0+0x7d7/0x8c0
kasan_report+0xb8/0xf0
? __run_timer_base.part.0+0x7d7/0x8c0
__run_timer_base.part.0+0x7d7/0x8c0
? rcu_sched_clock_irq+0xb06/0x27d0
? __pfx___run_timer_base.part.0+0x10/0x10
? try_to_wake_up+0xb15/0x1960
? tmigr_update_events+0x280/0x740
? _raw_spin_lock_irq+0x80/0xe0
? __pfx__raw_spin_lock_irq+0x10/0x10
tmigr_handle_remote_up+0x603/0x7e0
? __pfx_tmigr_handle_remote_up+0x10/0x10
? sched_balance_trigger+0x98/0x9f0
? sched_tick+0x221/0x5a0
? _raw_spin_lock_irq+0x80/0xe0
? __pfx__raw_spin_lock_irq+0x10/0x10
? tick_nohz_handler+0x339/0x440
? __pfx_tmigr_handle_remote_up+0x10/0x10
__walk_groups.isra.0+0x42/0x150
tmigr_handle_remote+0x1f4/0x2e0
? __pfx_tmigr_handle_remote+0x10/0x10
? ktime_get+0x60/0x140
? lapic_next_event+0x11/0x20
? clockevents_program_event+0x1d4/0x2a0
? hrtimer_interrupt+0x322/0x780
handle_softirqs+0x16a/0x550
irq_exit_rcu+0xaf/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
</IRQ>
...
Allocated by task 141:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x7f/0x90
__kmalloc_node_track_caller_noprof+0x198/0x430
devm_kmalloc+0x7b/0x1e0
tc358743_probe+0xb7/0x610 i2c_device_probe+0x51d/0x880
really_probe+0x1ca/0x5c0
__driver_probe_device+0x248/0x310
driver_probe_device+0x44/0x120
__device_attach_driver+0x174/0x220
bus_for_each_drv+0x100/0x190
__device_attach+0x206/0x370
bus_probe_device+0x123/0x170
device_add+0xd25/0x1470
i2c_new_client_device+0x7a0/0xcd0
do_one_initcall+0x89/0x300
do_init_module+0x29d/0x7f0
load_module+0x4f48/0x69e0
init_module_from_file+0xe4/0x150
idempotent_init_module+0x320/0x670
__x64_sys_finit_module+0xbd/0x120
do_syscall_64+0xac/0x280
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 141:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3a/0x60
__kasan_slab_free+0x3f/0x50
kfree+0x137/0x370
release_nodes+0xa4/0x100
devres_release_group+0x1b2/0x380
i2c_device_probe+0x694/0x880
really_probe+0x1ca/0x5c0
__driver_probe_device+0x248/0x310
driver_probe_device+0x44/0x120
__device_attach_driver+0x174/0x220
bus_for_each_drv+0x100/0x190
__device_attach+0x206/0x370
bus_probe_device+0x123/0x170
device_add+0xd25/0x1470
i2c_new_client_device+0x7a0/0xcd0
do_one_initcall+0x89/0x300
do_init_module+0x29d/0x7f0
load_module+0x4f48/0x69e0
init_module_from_file+0xe4/0x150
idempotent_init_module+0x320/0x670
__x64_sys_finit_module+0xbd/0x120
do_syscall_64+0xac/0x280
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Replace timer_delete() with timer_delete_sync() and cancel_delayed_work()
with cancel_delayed_work_sync() to ensure proper termination of timer and
work items before resource cleanup.
This bug was initially identified through static analysis. For reproduction
and testing, I created a functional emulation of the tc358743 device via a
kernel module and introduced faults through the debugfs interface. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: stm32-usphyc: Fix off by one in probe()
The "index" variable is used as an index into the usbphyc->phys[] array
which has usbphyc->nphys elements. So if it is equal to usbphyc->nphys
then it is one element out of bounds. The "index" comes from the
device tree so it's data that we trust and it's unlikely to be wrong,
however it's obviously still worth fixing the bug. Change the > to >=. |
| Integer overflow or wraparound in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable denial of service via local access. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix IPsec cleanup over MPV device
When we do mlx5e_detach_netdev() we eventually disable blocking events
notifier, among those events are IPsec MPV events from IB to core.
So before disabling those blocking events, make sure to also unregister
the devcom device and mark all this device operations as complete,
in order to prevent the other device from using invalid netdev
during future devcom events which could cause the trace below.
BUG: kernel NULL pointer dereference, address: 0000000000000010
PGD 146427067 P4D 146427067 PUD 146488067 PMD 0
Oops: Oops: 0000 [#1] SMP
CPU: 1 UID: 0 PID: 7735 Comm: devlink Tainted: GW 6.12.0-rc6_for_upstream_min_debug_2024_11_08_00_46 #1
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core]
Code: 00 01 48 83 05 23 32 1e 00 01 41 b8 ed ff ff ff e9 60 ff ff ff 48 83 05 00 32 1e 00 01 eb e3 66 0f 1f 44 00 00 0f 1f 44 00 00 <48> 8b 47 10 48 83 05 5f 32 1e 00 01 48 8b 50 40 48 85 d2 74 05 40
RSP: 0018:ffff88811a5c35f8 EFLAGS: 00010206
RAX: ffff888106e8ab80 RBX: ffff888107d7e200 RCX: ffff88810d6f0a00
RDX: ffff88810d6f0a00 RSI: 0000000000000001 RDI: 0000000000000000
RBP: ffff88811a17e620 R08: 0000000000000040 R09: 0000000000000000
R10: ffff88811a5c3618 R11: 0000000de85d51bd R12: ffff88811a17e600
R13: ffff88810d6f0a00 R14: 0000000000000000 R15: ffff8881034bda80
FS: 00007f27bdf89180(0000) GS:ffff88852c880000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000010f159005 CR4: 0000000000372eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die+0x20/0x60
? page_fault_oops+0x150/0x3e0
? exc_page_fault+0x74/0x130
? asm_exc_page_fault+0x22/0x30
? mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core]
mlx5e_devcom_event_mpv+0x42/0x60 [mlx5_core]
mlx5_devcom_send_event+0x8c/0x170 [mlx5_core]
blocking_event+0x17b/0x230 [mlx5_core]
notifier_call_chain+0x35/0xa0
blocking_notifier_call_chain+0x3d/0x60
mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core]
mlx5_core_mp_event_replay+0x12/0x20 [mlx5_core]
mlx5_ib_bind_slave_port+0x228/0x2c0 [mlx5_ib]
mlx5_ib_stage_init_init+0x664/0x9d0 [mlx5_ib]
? idr_alloc_cyclic+0x50/0xb0
? __kmalloc_cache_noprof+0x167/0x340
? __kmalloc_noprof+0x1a7/0x430
__mlx5_ib_add+0x34/0xd0 [mlx5_ib]
mlx5r_probe+0xe9/0x310 [mlx5_ib]
? kernfs_add_one+0x107/0x150
? __mlx5_ib_add+0xd0/0xd0 [mlx5_ib]
auxiliary_bus_probe+0x3e/0x90
really_probe+0xc5/0x3a0
? driver_probe_device+0x90/0x90
__driver_probe_device+0x80/0x160
driver_probe_device+0x1e/0x90
__device_attach_driver+0x7d/0x100
bus_for_each_drv+0x80/0xd0
__device_attach+0xbc/0x1f0
bus_probe_device+0x86/0xa0
device_add+0x62d/0x830
__auxiliary_device_add+0x3b/0xa0
? auxiliary_device_init+0x41/0x90
add_adev+0xd1/0x150 [mlx5_core]
mlx5_rescan_drivers_locked+0x21c/0x300 [mlx5_core]
esw_mode_change+0x6c/0xc0 [mlx5_core]
mlx5_devlink_eswitch_mode_set+0x21e/0x640 [mlx5_core]
devlink_nl_eswitch_set_doit+0x60/0xe0
genl_family_rcv_msg_doit+0xd0/0x120
genl_rcv_msg+0x180/0x2b0
? devlink_get_from_attrs_lock+0x170/0x170
? devlink_nl_eswitch_get_doit+0x290/0x290
? devlink_nl_pre_doit_port_optional+0x50/0x50
? genl_family_rcv_msg_dumpit+0xf0/0xf0
netlink_rcv_skb+0x54/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x1fc/0x2d0
netlink_sendmsg+0x1e4/0x410
__sock_sendmsg+0x38/0x60
? sockfd_lookup_light+0x12/0x60
__sys_sendto+0x105/0x160
? __sys_recvmsg+0x4e/0x90
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f27bc91b13a
Code: bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 8b 05 fa 96 2c 00 45 89 c9 4c 63 d1 48 63 ff 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid potential deadlock
As Jiaming Zhang and syzbot reported, there is potential deadlock in
f2fs as below:
Chain exists of:
&sbi->cp_rwsem --> fs_reclaim --> sb_internal#2
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
rlock(sb_internal#2);
lock(fs_reclaim);
lock(sb_internal#2);
rlock(&sbi->cp_rwsem);
*** DEADLOCK ***
3 locks held by kswapd0/73:
#0: ffffffff8e247a40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat mm/vmscan.c:7015 [inline]
#0: ffffffff8e247a40 (fs_reclaim){+.+.}-{0:0}, at: kswapd+0x951/0x2800 mm/vmscan.c:7389
#1: ffff8880118400e0 (&type->s_umount_key#50){.+.+}-{4:4}, at: super_trylock_shared fs/super.c:562 [inline]
#1: ffff8880118400e0 (&type->s_umount_key#50){.+.+}-{4:4}, at: super_cache_scan+0x91/0x4b0 fs/super.c:197
#2: ffff888011840610 (sb_internal#2){.+.+}-{0:0}, at: f2fs_evict_inode+0x8d9/0x1b60 fs/f2fs/inode.c:890
stack backtrace:
CPU: 0 UID: 0 PID: 73 Comm: kswapd0 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_circular_bug+0x2ee/0x310 kernel/locking/lockdep.c:2043
check_noncircular+0x134/0x160 kernel/locking/lockdep.c:2175
check_prev_add kernel/locking/lockdep.c:3165 [inline]
check_prevs_add kernel/locking/lockdep.c:3284 [inline]
validate_chain+0xb9b/0x2140 kernel/locking/lockdep.c:3908
__lock_acquire+0xab9/0xd20 kernel/locking/lockdep.c:5237
lock_acquire+0x120/0x360 kernel/locking/lockdep.c:5868
down_read+0x46/0x2e0 kernel/locking/rwsem.c:1537
f2fs_down_read fs/f2fs/f2fs.h:2278 [inline]
f2fs_lock_op fs/f2fs/f2fs.h:2357 [inline]
f2fs_do_truncate_blocks+0x21c/0x10c0 fs/f2fs/file.c:791
f2fs_truncate_blocks+0x10a/0x300 fs/f2fs/file.c:867
f2fs_truncate+0x489/0x7c0 fs/f2fs/file.c:925
f2fs_evict_inode+0x9f2/0x1b60 fs/f2fs/inode.c:897
evict+0x504/0x9c0 fs/inode.c:810
f2fs_evict_inode+0x1dc/0x1b60 fs/f2fs/inode.c:853
evict+0x504/0x9c0 fs/inode.c:810
dispose_list fs/inode.c:852 [inline]
prune_icache_sb+0x21b/0x2c0 fs/inode.c:1000
super_cache_scan+0x39b/0x4b0 fs/super.c:224
do_shrink_slab+0x6ef/0x1110 mm/shrinker.c:437
shrink_slab_memcg mm/shrinker.c:550 [inline]
shrink_slab+0x7ef/0x10d0 mm/shrinker.c:628
shrink_one+0x28a/0x7c0 mm/vmscan.c:4955
shrink_many mm/vmscan.c:5016 [inline]
lru_gen_shrink_node mm/vmscan.c:5094 [inline]
shrink_node+0x315d/0x3780 mm/vmscan.c:6081
kswapd_shrink_node mm/vmscan.c:6941 [inline]
balance_pgdat mm/vmscan.c:7124 [inline]
kswapd+0x147c/0x2800 mm/vmscan.c:7389
kthread+0x70e/0x8a0 kernel/kthread.c:463
ret_from_fork+0x4bc/0x870 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
The root cause is deadlock among four locks as below:
kswapd
- fs_reclaim --- Lock A
- shrink_one
- evict
- f2fs_evict_inode
- sb_start_intwrite --- Lock B
- iput
- evict
- f2fs_evict_inode
- sb_start_intwrite --- Lock B
- f2fs_truncate
- f2fs_truncate_blocks
- f2fs_do_truncate_blocks
- f2fs_lock_op --- Lock C
ioctl
- f2fs_ioc_commit_atomic_write
- f2fs_lock_op --- Lock C
- __f2fs_commit_atomic_write
- __replace_atomic_write_block
- f2fs_get_dnode_of_data
- __get_node_folio
- f2fs_check_nid_range
- f2fs_handle_error
- f2fs_record_errors
- f2fs_down_write --- Lock D
open
- do_open
- do_truncate
- security_inode_need_killpriv
- f2fs_getxattr
- lookup_all_xattrs
- f2fs_handle_error
- f2fs_record_errors
- f2fs_down_write --- Lock D
- f2fs_commit_super
- read_mapping_folio
- filemap_alloc_folio_noprof
- prepare_alloc_pages
- fs_reclaim_acquire --- Lock A
In order to a
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
can: hi311x: fix null pointer dereference when resuming from sleep before interface was enabled
This issue is similar to the vulnerability in the `mcp251x` driver,
which was fixed in commit 03c427147b2d ("can: mcp251x: fix resume from
sleep before interface was brought up").
In the `hi311x` driver, when the device resumes from sleep, the driver
schedules `priv->restart_work`. However, if the network interface was
not previously enabled, the `priv->wq` (workqueue) is not allocated and
initialized, leading to a null pointer dereference.
To fix this, we move the allocation and initialization of the workqueue
from the `hi3110_open` function to the `hi3110_can_probe` function.
This ensures that the workqueue is properly initialized before it is
used during device resume. And added logic to destroy the workqueue
in the error handling paths of `hi3110_can_probe` and in the
`hi3110_can_remove` function to prevent resource leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to truncate first page in error path of f2fs_truncate()
syzbot reports a bug as below:
loop0: detected capacity change from 0 to 40427
F2FS-fs (loop0): Wrong SSA boundary, start(3584) end(4096) blocks(3072)
F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock
F2FS-fs (loop0): invalid crc value
F2FS-fs (loop0): f2fs_convert_inline_folio: corrupted inline inode ino=3, i_addr[0]:0x1601, run fsck to fix.
------------[ cut here ]------------
kernel BUG at fs/inode.c:753!
RIP: 0010:clear_inode+0x169/0x190 fs/inode.c:753
Call Trace:
<TASK>
evict+0x504/0x9c0 fs/inode.c:810
f2fs_fill_super+0x5612/0x6fa0 fs/f2fs/super.c:5047
get_tree_bdev_flags+0x40e/0x4d0 fs/super.c:1692
vfs_get_tree+0x8f/0x2b0 fs/super.c:1815
do_new_mount+0x2a2/0x9e0 fs/namespace.c:3808
do_mount fs/namespace.c:4136 [inline]
__do_sys_mount fs/namespace.c:4347 [inline]
__se_sys_mount+0x317/0x410 fs/namespace.c:4324
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
During f2fs_evict_inode(), clear_inode() detects that we missed to truncate
all page cache before destorying inode, that is because in below path, we
will create page #0 in cache, but missed to drop it in error path, let's fix
it.
- evict
- f2fs_evict_inode
- f2fs_truncate
- f2fs_convert_inline_inode
- f2fs_grab_cache_folio
: create page #0 in cache
- f2fs_convert_inline_folio
: sanity check failed, return -EFSCORRUPTED
- clear_inode detects that inode->i_data.nrpages is not zero |
| In the Linux kernel, the following vulnerability has been resolved:
serial: qcom-geni: Fix blocked task
Revert commit 1afa70632c39 ("serial: qcom-geni: Enable PM runtime for
serial driver") and its dependent commit 86fa39dd6fb7 ("serial:
qcom-geni: Enable Serial on SA8255p Qualcomm platforms") because the
first one causes regression - hang task on Qualcomm RB1 board (QRB2210)
and unable to use serial at all during normal boot:
INFO: task kworker/u16:0:12 blocked for more than 42 seconds.
Not tainted 6.17.0-rc1-00004-g53e760d89498 #9
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u16:0 state:D stack:0 pid:12 tgid:12 ppid:2 task_flags:0x4208060 flags:0x00000010
Workqueue: async async_run_entry_fn
Call trace:
__switch_to+0xe8/0x1a0 (T)
__schedule+0x290/0x7c0
schedule+0x34/0x118
rpm_resume+0x14c/0x66c
rpm_resume+0x2a4/0x66c
rpm_resume+0x2a4/0x66c
rpm_resume+0x2a4/0x66c
__pm_runtime_resume+0x50/0x9c
__driver_probe_device+0x58/0x120
driver_probe_device+0x3c/0x154
__driver_attach_async_helper+0x4c/0xc0
async_run_entry_fn+0x34/0xe0
process_one_work+0x148/0x290
worker_thread+0x2c4/0x3e0
kthread+0x118/0x1c0
ret_from_fork+0x10/0x20
The issue was reported on 12th of August and was ignored by author of
commits introducing issue for two weeks. Only after complaining author
produced a fix which did not work, so if original commits cannot be
reliably fixed for 5 weeks, they obviously are buggy and need to be
dropped. |
