| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| stream-json is a micro-library of stream components for processing JSON and JSONC with a minimal memory footprint. Prior to 3.5.0, the path filters pick, ignore, filter, and replace in src/core/filters/filter-base.js recompute the full path string from the nesting stack for every checkable token. Because the stack length equals the current nesting depth and a checkable token is emitted at every level, a depth D document costs O(D²) rather than O(D) to process. The issue is triggered by nesting depth rather than byte volume, including the documented pick({filter: 'data'}) traversal-until-match path, so an application that sends untrusted JSON through a string or RegExp filter can block the Node.js event loop and cause denial of service with a small deeply nested document. The streamArray, streamObject, and streamValues streamers are not affected because they use the constant-time asm.depth getter. This issue is fixed in version 3.5.0. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to cause a denial of service due to an integer overflow. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to cause a denial of service due to a stack-based buffer overflow. |
| IBM Cloud Pak for Data System 11.3.0.2 through Interim Fix 001 could allow an unauthorized user to inject data into log messages due to improper neutralization of special elements when written to log files. |
| Spring Boot's ArtemisEmbeddedConfigurationFactory uses a fixed, static path for the embedded Artemis message broker's data directory when no explicit path is configured. A local attacker on the same host can pre-create this predictable directory or place a symlink before the application starts.
Affected versions:
Spring Boot 4.0.0 through 4.0.6; 3.5.0 through 3.5.14; 3.4.0 through 3.4.16; 3.3.0 through 3.3.19; 2.7.0 through 2.7.33. |
| A maliciously crafted PDF file, when parsed through Autodesk Revit, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: add data_len bound checks to activation parameter extractors
nci_extract_activation_params_iso_dep() and
nci_extract_activation_params_nfc_dep() read an inner length byte from
the NCI RF_INTF_ACTIVATED_NTF payload and use it to memcpy() into fixed
kernel buffers, but neither function receives the caller-validated
activation_params_len. A crafted NCI notification with
activation_params_len=1 and an inner length byte of up to 20 (NFC-A) or
50 (NFC-B) causes memcpy() to read that many bytes past the one valid
byte in the activation params region -- a slab out-of-bounds read of
kernel memory adjacent to the NCI skb.
The sibling nci_extract_rf_params_*() family was given equivalent
protection by commit 571dcbeb8e63 ("net: nfc: nci: Fix parameter
validation for packet data"), but the two activation parameter
extractors were not updated at that time.
Add a data_len parameter to both functions, guard against an empty
region before consuming the inner length byte, decrement the remaining
count after consuming it, and clamp the copy length to what is actually
available. Update both call sites to pass ntf.activation_params_len,
which is already validated against the skb at ntf.c:801. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: fix OOB read and u8 offset wrap in TLV parsers
nfc_llcp_parse_gb_tlv() and nfc_llcp_parse_connection_tlv() contain
three related bugs in their TLV parsing loops:
1. 'offset' is declared u8 but tlv_array_len is u16. When TLV data
advances offset past 255 it silently wraps to zero, causing
infinite loops or double-processing of buffer data.
2. Before reading tlv[0] (type) and tlv[1] (length) there is no
check that offset+2 <= tlv_array_len. A truncated TLV causes
an OOB read of one byte past the buffer end.
3. After reading the length field, the value bytes are accessed
without checking offset+2+length <= tlv_array_len. A crafted
length=0xFF on a short buffer causes up to 255 bytes of OOB
read past the buffer end.
Both functions are reachable without authentication via
nfc_llcp_set_remote_gb() which feeds remote LLCP general bytes
directly into nfc_llcp_parse_gb_tlv() with no additional
validation.
Fix all three issues by widening offset from u8 to u16 and adding
bounds checks for both the TLV header and value field before each
access. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: digital: clamp SENSF_RES length to the destination buffer
digital_in_recv_sensf_res() memcpy()s resp->len bytes from a remote
NFC-F device response into the NFC_SENSF_RES_MAXSIZE-byte target.sensf_res
field without an upper-bound check. A nearby malicious NFC-F device can
send an oversized SENSF_RES response to overflow the stack-local struct
nfc_target.
Clamp resp->len to NFC_SENSF_RES_MAXSIZE before the copy.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: validate attr entry pointer before field access
xfs_attr3_leaf_verify_entry() accesses lentry/rentry fields (namelen,
valuelen) before checking if the entry pointer itself is within bounds.
If nameidx is crafted to point near the end of the buffer, these field
accesses can read out-of-bounds before the bounds check at
name_end > buf_end is performed.
Add explicit bounds checks for entry pointers before accessing their
fields. Use offsetof() to check that the start of the flexible array
member (nameval/name) is within bounds, which ensures all preceding
fields are safe to access. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_aml: validate firmware segment lengths
aml_download_firmware() reads two lengths from the firmware header and
uses them to build pointers before checking that the header and segment
data are present. A truncated or inconsistent firmware image can make
the driver read past firmware->data while constructing TCI commands.
Reject images shorter than the header and ensure that the ICCM and DCCM
ranges fit within the loaded firmware before downloading either segment. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: dummy: Check card index validity at probe
snd_dummy_probe() blindly trusts that the given devptr->id value is
within the proper card index range. It's OK for the devices the
driver itself creates at the module probe time, but if the device is
bound manually via sysfs interface, this could be -1 as "none", and
this leads to OOB access for index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range. |
| In the Linux kernel, the following vulnerability has been resolved:
rndis_host: add overflow check in rndis_rx_fixup()
Add an overflow check to ensure that data_offset + data_len + 8 does not
wrap, which would enable an OOB read of the USB data buffer. |
| ipmi-oem in FreeIPMI before 1.6.19 has a stack-based buffer overflow in _output_dell_system_info_cmc_ipv6_info in ipmi-oem/ipmi-oem-dell.c (cmc-ipv6-info subcommand to dell get-system-info). |
| fastify versions before 5.12.2 treat the object resolved by a successful Ajv async validator as the value result protocol used by custom validator compilers. If a request that passes its route schema contains a property named value at the root, fastify replaces the entire request body with that property's value before the handler runs, so the handler receives a different object than the one that satisfied the schema. An authenticated low-privilege caller can use this to make nested data replace the validated body and trigger an operation the route schema did not authorize, leading to unauthorized state changes and data disclosure. Users should upgrade to fastify 5.12.2 or later. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to corrupt memory due to an integer underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: fix OOB read of field->usage in hid_set_field()
hid_set_field() hands field->usage + offset to hid_dump_input() before
the guard that bounds offset:
hid_dump_input(field->report->device, field->usage + offset, value);
if (offset >= field->report_count) {
hid_err(...);
return -1;
}
Under CONFIG_DEBUG_FS hid_dump_input() dereferences that pointer, with
buf = hid_resolv_usage(usage->hid, NULL). The usage[] array is
allocated inline with the hid_field in hid_register_field() and holds
field->maxusage entries, so an offset past it reads off the end of the
kvzalloc()ed allocation and into a neighbouring object. Had the guard
run first, offset < report_count <= maxusage would already have confined
the pointer to the array.
A caller supplies such an offset today. picolcd_fb_send_tile()
validates only report->maxfield before issuing
hid_set_field(report->field[0], 11 + i, ...) for i = 0..31, so its
offsets are fixed at 11..42 and are never checked against the bound
field. When the device registers that field with fewer usages, the
framebuffer deferred-io work drives the read on every tile. KASAN
reports a 4-byte slab-out-of-bounds read in hid_dump_input() below
hid_set_field(), and the same boot logs "offset (1) exceeds
report_count (1)" from the guard that runs only afterwards.
Move the hid_dump_input() call below the guard. Because
field->maxusage >= field->report_count, the guard then establishes that
field->usage + offset lies inside the array before it is dereferenced,
for every caller and without changing behaviour on the valid path.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| Wss4jSecurityInterceptor initialized its BSP (WS-I Basic Security Profile) compliance flag so that inbound validation disabled WSS4J BSP enforcement on RequestData. Services that validate WS-Security on the network could therefore accept messages that violate BSP rules, weakening protocol-level checks.
Affected versions:
Spring Web Services 5.0.0 through 5.0.1; 4.1.0 through 4.1.3; 4.0.0 through 4.0.18; 3.1.0 through 3.1.8. |
| Tapo
C100/C101 V5 contains a heap-based buffer overflow vulnerability in the RTSP
service. An authenticated attacker on the local network can send specially
crafted RTSP frame data containing oversized length values, resulting in
out-of-bounds heap writes.
Successful
exploitation can crash the RTSP service and trigger a device reboot, resulting
in a temporary denial-of-service condition. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix out-of-bounds write in nci_target_auto_activated()
nci_target_auto_activated() appends a target to the fixed-size array
ndev->targets[NCI_MAX_DISCOVERED_TARGETS] and increments ndev->n_targets
without first checking the array is full; unlike its sibling
nci_add_new_target(), which bails out when n_targets already equals
NCI_MAX_DISCOVERED_TARGETS.
ndev->n_targets is only cleared by nci_clear_target_list(), so an NFCC
that repeatedly re-runs discovery (RF_DISCOVER_RSP, which re-enters
NCI_DISCOVERY without clearing the target list) and reports an
auto-activated target (RF_INTF_ACTIVATED_NTF) drives n_targets past the
limit. The append then writes a struct nfc_target past the end of the
array (a slab out-of-bounds write), and nfc_targets_found() goes on to
walk the array with the inflated count:
BUG: KASAN: slab-out-of-bounds in nci_add_new_protocol+0x94/0x2ac [nci]
Write of size 2 at addr ffff0000c7299a18 by task kworker/u8:0/12
Workqueue: nfc0_nci_rx_wq nci_rx_work [nci]
Call trace:
nci_add_new_protocol+0x94/0x2ac [nci]
nci_ntf_packet+0xddc/0x11a0 [nci]
nci_rx_work+0x15c/0x1e0 [nci]
process_one_work+0x2dc/0x500
worker_thread+0x240/0x460
kthread+0x1c0/0x1d0
ret_from_fork+0x10/0x20
The buggy address belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1024 bytes to the right of
allocated 1560-byte region [ffff0000c7299000, ffff0000c7299618)
Guard nci_target_auto_activated() with the same check used by
nci_add_new_target(). |
