| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_rewrite_module module. This vulnerability exists when a rewrite directive uses a regex pattern with distinct, overlapping Perl-Compatible Regular Expression (PCRE) captures (for example, ^/((.*))$) and a replacement string that references multiple such captures (for example, $1$2) in a redirect or arguments context. An unauthenticated attacker along with conditions beyond their control can exploit this vulnerability by sending crafted HTTP requests. This may cause a heap buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_rewrite_module module. This vulnerability exists when the rewrite directive is followed by a rewrite, if, or set directive and an unnamed Perl-Compatible Regular Expression (PCRE) capture (for example, $1, $2) with a replacement string that includes a question mark (?). An unauthenticated attacker along with conditions beyond its control can exploit this vulnerability by sending crafted HTTP requests. This may cause a heap buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_proxy_v2_module and ngx_http_grpc_module modules. This vulnerability exists when the proxy_http_version to 2 or grpc_pass directives are used to proxy HTTP/2 traffic, the ignore_invalid_headers directive is set to off, and the large_client_header_buffers directive size is larger than 2 megabytes. A remote, unauthenticated attacker, along with conditions beyond their control, could send large headers while creating an upstream request. This may cause a heap-based buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Vite is a frontend tooling framework for JavaScript. From 6.0.0 to before 6.4.2, 7.3.2, and 8.0.5, if it is possible to connect to the Vite dev server’s WebSocket without an Origin header, an attacker can invoke fetchModule via the custom WebSocket event vite:invoke and combine file://... with ?raw (or ?inline) to retrieve the contents of arbitrary files on the server as a JavaScript string (e.g., export default "..."). The access control enforced in the HTTP request path (such as server.fs.allow) is not applied to this WebSocket-based execution path. This vulnerability is fixed in 6.4.2, 7.3.2, and 8.0.5. |
| A flaw was found in GLib (Gnome Lib). This vulnerability allows a remote attacker to cause heap corruption, leading to a denial of service or potential code execution via a buffer-underflow in the GVariant parser when processing maliciously crafted input strings. |
| In the Linux kernel, the following vulnerability has been resolved:
vt: add permission check for KDSKBMETA ioctl
KDSKBMETA modifies keyboard meta mode but lacks the !perm check that all
other keyboard setter ioctls in vt_k_ioctl() enforce, allowing a process
to change meta mode on a non-controlling console without authorization. |
| A heap-based buffer overflow vulnerability exists in Konami's Metal Gear Online 3, originating from improper validation of lobby data fields related to kicked players. The affected function processes a list of kicked player identifiers using the lobby data key "kick_num" to determine the number of entries, and individual kicked player IDs supplied via keys in the format "kicked_id_%i". The function does not validate that "kick_num" falls within the expected bounds. The game design limits matches to a maximum of 16 players, and the corresponding buffer for storing kicked player IDs is sized accordingly. If "kick_num" exceeds this limit, the function continues writing the provided player IDs past the end of the intended buffer and into adjacent memory regions. These adjacent regions contain Steam callback handler structures responsible for processing lobby data updates, lobby messages, and other related events. By supplying an oversized "kick_num" value and appropriate "kicked_id_%i" fields, an attacker can overwrite fields within the callback handler structures, including function pointers and callback argument values. Successful exploitation may enable control-flow hijacking, potentially allowing arbitrary code execution within the game process. |
| LibVNCClient is a library for easy implementation of a VNC client. In versions 0.9.12 through 0.9.15, a malicious (or man-in-the-middle) VNC server can force a connecting `libvncclient` to write attacker-controlled data past the end of its framebuffer. This is an out-of-bounds heap write with attacker-controlled length, contents, and offset. It needs no authentication (the attacker
is the server), works in a default build with default settings, and fires from a single `FramebufferUpdate` the moment the victim connects. It crashes any client unconditionally (denial of service); we also demonstrated it overwriting an application callback pointer and redirecting execution to attacker-chosen code (code execution) under the default configuration. Commit 540332be3e0acc566fa64da6f1b4680c72c724dd patches the issue. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to a heap-based buffer overflow. |
| luci-lib-px5g (LuCI) contains a heap-based buffer overflow in the native ASN.1 encoding routine asn1_add_obj (x509write.c) when signing a certificate with a 2040-bit RSA key. For a 255-byte signature, the BIT STRING allocation is computed from the DER length encoding of 255 bytes, but the payload written after prepending the unused-bits byte is 256 bytes, requiring one additional DER length octet. As a result the allocation is 259 bytes while the tag, length, unused-bits byte, and signature require 260 bytes, and the final memcpy writes one byte beyond the heap buffer. The overflow is reachable through the exported Lua interface via create_selfsigned(); whether it is remotely exploitable depends on the embedding application. The vulnerable code is present on the openwrt-18.06 through openwrt-25.12 release branches and is absent from master, where the luci-lib-px5g package has been removed rather than patched. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to overwrite adjacent memory due to an integer underflow during bounds checking. |
| A flaw was found in QEMU's virtio-blk device. The issue arises because the device does not properly validate the size of input descriptors before writing data. A malicious guest with high privileges could exploit this vulnerability by submitting a malformed virtio-blk SCSI request, leading to an out-of-bounds write in the host heap memory and a potential denial of service (DoS) for the QEMU process. |
| In the Linux kernel, the following vulnerability has been resolved:
veth: convert frag_list skbs before running XDP
A frag_list skb can reach veth with data_len set but nr_frags zero.
veth_convert_skb_to_xdp_buff() only converts skbs that are shared,
locked, have frags[], or do not have enough headroom. It later uses
skb_is_nonlinear() to decide whether to set XDP_FLAGS_HAS_FRAGS and
xdp_frags_size.
That exposes frag_list data to XDP as if it were stored in frags[], but
frags[] is empty. AF_XDP copy mode can then trust the bogus XDP fragment
metadata, walk an empty fragment entry, and crash in memcpy() from
__xsk_rcv().
Route non-linear skbs through skb_pp_cow_data() before exposing them to
XDP, and only advertise XDP frags when the resulting skb has frags[].
skb_copy_bits() already handles frag_list input, and skb_pp_cow_data()
builds frags[] output with skb_add_rx_frag(), which is the
representation XDP multi-buffer expects. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc3-control: Fix heap overflow in bytes_ext put/get
The ipc_control_data buffer is allocated as kzalloc(max_size), where
max_size covers the entire struct sof_ipc_ctrl_data including its
flexible array payload. However, the bounds checks in bytes_ext_put
and _bytes_ext_get compared user data lengths against max_size
directly, ignoring that cdata->data sits at an offset of
sizeof(struct sof_ipc_ctrl_data) bytes into the allocation.
This allowed writing up to sizeof(struct sof_ipc_ctrl_data) bytes past
the end of the heap buffer from unprivileged userspace via the ALSA TLV
kcontrol interface, and similarly allowed over-reading adjacent heap
data on the get path.
Fix all bounds checks to subtract sizeof(*cdata) from max_size so they
reflect the actual space available at the cdata->data offset. Also fix
the error-path restore in bytes_ext_put which wrote to cdata->data
instead of cdata, causing the same overflow. |
| Capstone is a disassembly framework. In 6.0.0-Alpha9 and earlier, Capstone's arch/SH/SHDisassembler.c SH floating-point decoders such as opFADD, opFMUL, and opFSUB call set_reg() and set_reg_n() using sh_info.op.op_count without checking the fixed-size operands[] array. Repeated crafted instructions processed through cs_disasm_iter() or cs_disasm() with CS_ARCH_SH, CS_MODE_SH2A or CS_MODE_SH4A, CS_MODE_SHFPU, and CS_OPT_DETAIL can increment the operand count beyond the 176-byte sh_info allocation and perform a four-byte heap buffer overflow write. The corruption can crash the process and may enable code execution depending on heap layout. This issue is fixed in version 6.0.0-Alpha10. |
| Buffer Overflow vulnerability in Open5GS v.2.7.0 allows a remote attacker to cause a denial of service via the NAS 5GS decoder chain, triggered when the message type byte of a NAS PDU is mutated |
| Sony XAV-9500ES l2_reassemble_sdu Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Sony XAV-9500ES devices. An attacker must first obtain the ability to pair a malicious Bluetooth device with the target system in order to exploit this vulnerability.
The specific flaw exists within the handling of Bluetooth L2CAP packets. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-29072. |
| Sony XAV-9500ES AVRCP_Br_Response_Parser Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Sony XAV-9500ES devices. An attacker must first obtain the ability to pair a malicious Bluetooth device with the target system in order to exploit this vulnerability.
The specific flaw exists within the handling of AVRCP packets. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-28995. |
| Buffer overflow in ANGLE in Google Chrome on on Android prior to 151.0.7922.169 allowed a remote attacker who had compromised the renderer process to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| libvips is a fast image processing library with low memory needs. Prior to version 8.18.3, a crafted many-band TIFF processed through VipsForeignLoadTiff can evade scanline validation in libvips/iofuncs/image.c and cause an integer overflow in vips_image_sanity. The resulting buffer-region calculation can access attacker-controlled negative offsets in mmap-resident allocations, allowing reads or writes of other image data, possible data disclosure through uncompressed .v output, and likely process crashes. Remote code execution has not been demonstrated but cannot be ruled out. This issue is fixed in version 8.18.3. |
