| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 15.8.5 and iPadOS 15.8.5, iOS 16.7.12 and iPadOS 16.7.12, iOS 18.6.2 and iPadOS 18.6.2, iPadOS 17.7.10, macOS Sequoia 15.6.1, macOS Sonoma 14.7.8, macOS Ventura 13.7.8. Processing a malicious image file may result in memory corruption. Apple is aware of a report that this issue may have been exploited in an extremely sophisticated attack against specific targeted individuals. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: validate external BO copy bounds for both stride paths
vmw_external_bo_copy() trusts caller-supplied offsets, strides, and
heights and operates on imported dma-buf vmaps:
- The equal-stride memcpy() bound was clamped after subtracting the
offsets from dst_size and src_size; an offset larger than the BO
size wraps the unsigned subtraction to a huge value and the
resulting memcpy() runs off the end of the vmap. dst_stride *
height is also a u32 multiplication that can overflow.
- The non-equal-stride row-by-row path had no bound at all. The
loop touches bytes through offset + (height - 1) * stride +
width_in_bytes, with only a WARN_ON(dst_stride < width_in_bytes),
and could likewise step past the end of either mapping.
The offsets and strides are derived from STDU/SOU plane state, so a
configured CRTC submitting a crafted atomic commit on an imported
framebuffer can reach this path.
Validate the exact row-copy endpoint against each BO's size up front
using check_mul_overflow() and check_add_overflow(). Use the bulk
memcpy() path only when width_in_bytes covers the whole stride;
otherwise copy one row at a time so partial-row updates near the bottom
of a framebuffer remain valid. Also reject zero strides and stride <
width_in_bytes, both of which the row-by-row path cannot represent
safely. |
| A remote code execution vulnerability was found in libaom, the reference AV1 codec implementation. Insufficient bounds validation in the AV1 encoder's SVC (Scalable Video Coding) layer ID control allows an attacker to supply crafted video frame pixels that overlap with internal encoder layer context structures. In fork-based video processing services, an attacker can use this to hijack the cyclic refresh map pointer, brute-force the process base address via a crash oracle, and redirect control flow to achieve arbitrary command execution. Exploitation requires the target service to use libaom with SVC encoding enabled and accept attacker-supplied video frames. |
| An arbitrary address write vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows an attacker to inject an arbitrary pointer into the cyclic refresh map field via crafted image pixel values. The encoder then writes approximately 1,200 bytes at the attacker-controlled address. This is fully deterministic and does not require a separate information leak. An attacker who can supply frames to a network-facing libaom encoder with SVC enabled could exploit this for denial of service or potential code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: npc: Fix size of entry2cntr_map
KASAN prints below splat. This is caused by allocating counter for
reserved mcam entry for cpt 2nd pass entry. But mcam->entry2cntr_map
is not allocated for reserved entries.
BUG: KASAN: slab-out-of-bounds in npc_map_mcam_entry_and_cntr+0xb0/0x1a0
Write of size 2 at addr ffff0001033e7ffe by task kworker/0:1/14
CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 6.1.67 #1
Hardware name: Marvell CN106XX board (DT)
Workqueue: events work_for_cpu_fn
Call trace:
dump_backtrace.part.0+0xe4/0xf0
show_stack+0x18/0x30
dump_stack_lvl+0x88/0xb4
print_report+0x154/0x458
kasan_report+0xb8/0x194
__asan_store2+0x7c/0xa0
npc_map_mcam_entry_and_cntr+0xb0/0x1a0
rvu_mbox_handler_npc_mcam_write_entry+0x268/0x280
npc_install_flow+0x840/0xfe0
rvu_npc_install_cpt_pass2_entry+0x138/0x190
rvu_nix_init+0x148c/0x2880
rvu_probe+0x1800/0x30b0
local_pci_probe+0x78/0xe0
work_for_cpu_fn+0x30/0x50
process_one_work+0x4cc/0x97c
worker_thread+0x360/0x630
kthread+0x1a0/0x1b0
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - copy IV using skcipher ivsize
AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver.
ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV
buffer while RFC3686 skciphers expose an 8-byte IV, so the restore
overruns the provided buffer.
Use crypto_skcipher_ivsize() to copy only the algorithm's IV length. |
| Dell PowerStore SDNAS, contains an Out-of-bounds Write vulnerability in SMB/CIFS. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to denial of service and remote execution. This is a Critical vulnerability as a remote user could send a specially crafted SMB packet and cause a crash, that is persistent in case automatic restarts are enabled. Additionally, a more sophisticated attacker could use the same vulnerability for remote code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: fix guest_memory_dirty bitfield clobbered as size
Two sites in vmwgfx_resource.c assign boolean literals to
res->guest_memory_size, which is an unsigned long allocation-size
field; the intended target is the adjacent res->guest_memory_dirty
bitfield. After the assignments the field holds 0 or 1 instead of
the resource's MOB allocation size:
- vmw_resource_release() writes 0 (false), and
- vmw_resource_unbind_list() writes 1 (true).
Subsequent revalidation paths read guest_memory_size when computing
the dirty page range (vmw_bo_dirty_transfer_to_res()) and the buffer
allocation size (vmw_resource_buf_alloc()), producing zero-length
walks or wrap-around ranges that read or write past the MOB bitmap.
The dirty-tracking intent of the original code (mark the resource as
dirtied since the last sync) is also lost, since guest_memory_dirty
is never updated.
Rename both assignments to guest_memory_dirty. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lwtunnel: Drop skb metadata before LWT encapsulation
skb metadata is meant for passing information between XDP and TC. It lives
in the skb headroom, immediately before skb->data. LWT programs cannot
access the __sk_buff->data_meta pseudo-pointer to metadata.
However, LWT encapsulation prepends outer headers, moving skb->data back
over the headroom where the metadata sits. On an RX-originated (forwarded)
packet that still carries XDP metadata this goes wrong in two different
ways, depending on the encap type:
1. Non-BPF LWT encaps (mpls, seg6, ioam6 ...) call skb_push()/skb_pull()
and silently overwrite the metadata that sits in the headroom.
2) BPF LWT xmit calls bpf_skb_change_head(), which uses skb_data_move().
That helper expects metadata immediately before skb->data. But since
the IP output path runs LWT xmit before neighbour output has built
the outgoing L2 header, for forwarded packets skb->data points at the
L3 header while skb_mac_header() still points at the old L2 header.
skb_data_move() sees metadata ending at skb_mac_header(), not before
skb->data, warns and clears metadata:
WARNING: CPU: 21 PID: 454557 at include/linux/skbuff.h:4609 skb_data_move+0x47/0x90
CPU: 21 UID: 0 PID: 454557 Comm: napi/iconduit-g Tainted: G O 6.18.21 #1
RIP: 0010:skb_data_move+0x47/0x90
Call Trace:
<IRQ>
bpf_skb_change_head+0xe6/0x1a0
bpf_prog_...+0x213/0x2e3
run_lwt_bpf.isra.0+0x1d3/0x360
bpf_xmit+0x46/0xe0
lwtunnel_xmit+0xa1/0xf0
ip_finish_output2+0x1e7/0x5e0
ip_output+0x63/0x100
__netif_receive_skb_one_core+0x85/0xa0
process_backlog+0x9c/0x150
__napi_poll+0x2b/0x190
net_rx_action+0x40b/0x7f0
handle_softirqs+0xd2/0x270
do_softirq+0x3f/0x60
</IRQ>
That is what happens, as for how to fix it - a received packet that
carries metadata can reach an encap through any of the three LWT
redirect modes:
LWTUNNEL_STATE_INPUT_REDIRECT
ip6_rcv_finish
dst_input
lwtunnel_input
LWTUNNEL_STATE_OUTPUT_REDIRECT
ip6_rcv_finish
dst_input
ip6_forward
ip6_forward_finish
dst_output
lwtunnel_output
LWTUNNEL_STATE_XMIT_REDIRECT
ip6_rcv_finish
dst_input
ip6_forward
ip6_forward_finish
dst_output
ip6_output
ip6_finish_output
ip6_finish_output2
lwtunnel_xmit
Every encap funnels through the three LWT dispatch helpers, so drop the
metadata there, right before handing the skb to the encap op. This
single chokepoint covers all encap types and all three redirect modes:
- lwtunnel_input(): seg6, rpl, ila, seg6_local
- lwtunnel_output(): ioam6
- lwtunnel_xmit(): mpls, LWT BPF xmit
Alternatively, we could clear the metadata right after TC ingress hook.
That would require a compromise, however. Metadata would become
inaccessible from TC egress (in setups where it actually reaches the
hook it tact, that is without any L2 tunnels on path). |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: bound interrupt-vector register fill to the allocated array
idpf_get_reg_intr_vecs() fills the caller-allocated reg_vals[] array from
the VIRTCHNL2_OP_ALLOC_VECTORS reply in adapter->req_vec_chunks, bounding
its inner loop only by the per-chunk num_vectors. The array is sized
separately: idpf_intr_reg_init() allocates
kzalloc_objs(struct idpf_vec_regs, total_vecs) from
caps.num_allocated_vectors and only checks the returned count after the
fill. The sum of per-chunk num_vectors is never reconciled against
total_vecs, so a reply with a small num_allocated_vectors but chunks
summing higher writes past the end of reg_vals[].
Impact: a control plane (a PF or hypervisor device model) that returns a
VIRTCHNL2_OP_ALLOC_VECTORS reply whose per-chunk num_vectors sum exceeds
num_allocated_vectors writes struct idpf_vec_regs entries past the end of
the reg_vals kmalloc allocation (KASAN slab-out-of-bounds write).
Bound the fill loop to the array capacity passed in by the callers,
mirroring the sibling idpf_vport_get_q_reg(). The existing
num_regs < num_vecs check then rejects an undersized reply without the
out-of-bounds write happening first. |
| In the Linux kernel, the following vulnerability has been resolved:
can: softing: fw_parse(): validate firmware record spans
fw_parse() reads a fixed record header, a firmware-provided payload,
and a trailing checksum without knowing the end of the firmware blob. A
truncated record can therefore make those reads exceed the blob.
The same record also supplies addresses and lengths for writes into
DPRAM. The generic loader uses wrap-prone mixed signed arithmetic for its
bounds check, while the application loader does not bound the staging
copy at all.
Pass the firmware end to the parser and validate the full source record.
Use a signed wide offset for generic DPRAM records and validate the
application staging span against the mapped DPRAM before copying. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: fix foe_check_time allocation size
foe_check_time is declared as u16 pointer but was allocated with
only ppe_num_entries bytes instead of ppe_num_entries * sizeof(u16).
When airoha_ppe_foe_verify_entry() is called with hash >= ppe_num_entries/2,
it writes beyond the allocated buffer, causing heap buffer overflow and
potential kernel crash. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dst_metadata: fix false-positive memcpy overflow in tun_dst_unclone
kmalloc_flex() in metadata_dst_alloc() sets __counted_by for the
structure to the options_len, which is then initialized to zero.
Later, we're initializing the structure by copying the tunnel info
together with the options, and this triggers a warning for a potential
memcpy overflow, since the compiler estimates that the options can't
fit into the structure, even though the memory for them is actually
allocated.
memcpy: detected buffer overflow: 104 byte write of buffer size 96
WARNING: CPU: X PID: Y at lib/string_helpers.c:1036 __fortify_report
skb_tunnel_info_unclone+0x179/0x190
geneve_xmit+0x7fe/0xe00
The issue is triggered when built with clang and source fortification.
Fix that by doing the copy in two stages: first - the main data with
the options_len, then the options. This way the correct length should
be known at the time of the copy.
It would be better if the options_len never changed after allocation,
but the allocation code is a little separate from the initialization
and it would be awkward and potentially dangerous to return a struct
with options_len set to a non-zero value from the metadata_dst_alloc().
Another option would be to use ip_tunnel_info_opts_set(), but it is
doing too many unnecessary operations for the use case here. |
| A buffer overflow vulnerability in the WatchGuard Fireware OS Management Web UI allows an authenticated administrator with network access to cause a denial of service (DoS) condition or potentially execute arbitrary code by sending specially crafted network traffic. |
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. Versions 3.3.0 through 3.3.12 and 3.4.0 through 3.4.13 contain a heap buffer overflow in PyOpenEXR triggered by a channel-name key collision between literal and prefixed RGB channels. When separate_channels=false, PyOpenEXR maps each physical channel name through channelNameToRGBA() and coalesces the results into a shared RGB array. A crafted flat scanline EXR that contains both a literal channel such as left and prefixed channels such as left.R, left.G, and left.B causes these names to collide, so the wrapper reuses an undersized two-dimensional NumPy array for the coalesced RGB slices and writes out of bounds when OpenEXR.File(path) decodes the pixels. This issue is fixed in versions 3.3.13 and 3.4.14. |
| SMM IHISI command handler, FMTSWriteUseIntelLib, for FMTS command 0x32, read and write data without checking buffer size and could cause buffer overflow. |
| CVE-2025-40843 https://github.com/advisories/GHSA-5xf2-f6ch-6p8r was fixed by replacing unchecked strcpy() with a bounded safe_strcpy() helper.
At ldlogger-tool-gcc.c:129 the destination passed to that helper is fullPath + 2, but the size
passed down is the full PATH_MAX. safe_strcpy() is strncpy(), which NUL-pads the
destination out to the whole n, so this site writes 4096 bytes into the 4094 that remain — a
2-byte stack overflow on every invocation, independent of the input path's length.
This issue affects CodeChecker: through 6.28.2. |
| A flaw was found in FFmpeg. The tdsc_load_cursor() function writes beyond
the bounds of a heap-allocated buffer when processing crafted TDSC cursor
data. A remote attacker could exploit this by supplying a specially crafted
video file, potentially leading to a denial of service or arbitrary code
execution. |
| Passing an effectively empty string to the `,ccs=` syntax extension of the mode argument in the `fopen` function in the GNU C Library version 2.45 or earlier may result in a heap buffer overflow when the mode string input to the function is attacker controlled.
This usage pattern is not seen in applications in common GNU/Linux distributions and applications that process user-supplied values for `ccs` should not pass them through without validation. |
| A stack-based buffer overflow in the epm (Endpoint Protection Manager) service used by the deprecated Mobile Security feature in WatchGuard Fireware OS allows an unauthenticated remote attacker to execute arbitrary code. |
