| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker with level-15 privileges or an unauthenticated attacker with physical access to an affected device to execute persistent code at boot time and break the chain of trust. This vulnerability is due to improper validation of software packages. An attacker could exploit this vulnerability by placing a crafted file into a specific location on an affected device. A successful exploit could allow the attacker to execute persistent code on the underlying operating system. Because this vulnerability allows an attacker to bypass a major security feature of a device, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High. |
| A vulnerability in the access control list (ACL) programming of Cisco IOS XE Software for Cisco Catalyst 9500X and 9600X Series Switches could allow an unauthenticated, remote attacker to bypass a configured ACL on an affected device.
This vulnerability is due to the flooding of traffic from an unlearned MAC address on a switch virtual interface (SVI) that has an egress ACL applied. An attacker could exploit this vulnerability by causing the VLAN to flush its MAC address table. This condition can also occur if the MAC address table is full. A successful exploit could allow the attacker to bypass an egress ACL on an affected device. |
| A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS XE Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper error handling when parsing a specific SNMP request. An attacker could exploit this vulnerability by sending a specific SNMP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMPv2c or earlier, the attacker must know a valid read-write or read-only SNMP community string for the affected system. To exploit this vulnerability through SNMPv3, the attacker must have valid SNMP user credentials for the affected system. |
| A vulnerability in the Internet Key Exchange Version 2 (IKEv2) feature of Cisco IOS Software, IOS XE Software, Secure Firewall Adaptive Security Appliance (ASA) Software, and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition.
This vulnerability is due to a lack of proper processing of IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. In the case of Cisco IOS and IOS XE Software, a successful exploit could allow the attacker to cause the device to reload unexpectedly. In the case of Cisco ASA and FTD Software, a successful exploit could allow the attacker to partially exhaust system memory, causing system instability such as being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition. |
| Multiple vulnerabilities in Cisco IOS XE Software of could allow an authenticated, local attacker with level-15 privileges or an unauthenticated attacker with physical access to the device to execute persistent code at boot time and break the chain of trust.
These vulnerabilities are due path traversal and improper image integrity validation. A successful exploit could allow the attacker to execute persistent code on the underlying operating system.
Because this allows the attacker to bypass a major security feature of the device, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High.
For more information about these vulnerabilities, see the Details ["#details"] section of this advisory.
ERP |
| A vulnerability in the web-based management interface of Cisco UCS Manager Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface.
This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit this vulnerability by injecting malicious data into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must be a member of the Administrator or AAA Administrator role. |
| A vulnerability in the Geolocation-Based Remote Access (RA) VPN feature of Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured policies to allow or deny HTTP connections based on a country or region.
This vulnerability exists because the URL string is not fully parsed. An attacker could exploit this vulnerability by sending a crafted HTTP connection through the targeted device. A successful exploit could allow the attacker to bypass configured policies and gain access to a network where the connection should have been denied. |
| A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper parsing of IKEv2 packets. An attacker could exploit this vulnerability by sending a continuous stream of crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to partially exhaust system memory, causing system instability like being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition. |
| A vulnerability in the Web Authentication feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct a reflected cross-site scripting attack (XSS) on an affected device.
This vulnerability is due to improper sanitization of user-supplied input. An attacker could exploit this vulnerability by persuading a user to click a malicious link. A successful exploit could allow the attacker to execute a reflected XSS attack and steal user cookies from the affected device. |
| A vulnerability in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system with root-level privileges. To exploit this vulnerability, the attacker must have valid administrative credentials.
This vulnerability is due to insufficient input validation of commands that are supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input for specific commands. A successful exploit could allow the attacker to execute commands on the underlying operating system as root. |
| A vulnerability in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system with root-level privileges. To exploit this vulnerability, the attacker must have valid administrative credentials.
This vulnerability is due to insufficient input validation of commands that are supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input for specific commands. A successful exploit could allow the attacker to execute commands on the underlying operating system as root. |
| A vulnerability in the Cisco Industrial Ethernet Switch Device Manager (DM) of Cisco IOS Software could allow an authenticated, remote attacker to elevate privileges.
This vulnerability is due to insufficient validation of authorizations for authenticated users. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to elevate privileges to privilege level 15.
To exploit this vulnerability, the attacker must have valid credentials for a user account with privilege level 5 or higher. Read-only DM users are assigned privilege level 5. |
| A vulnerability in the Internet Key Exchange version 1 (IKEv1) implementation of Cisco IOS XE Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The attacker must have valid IKEv1 VPN credentials to exploit this vulnerability.
This vulnerability is due to improper validation of IKEv1 phase 2 parameters before the IPsec security association creation request is handed off to the hardware cryptographic accelerator of an affected device. An attacker could exploit this vulnerability by sending crafted IKEv1 messages to the affected device. A successful exploit could allow the attacker to cause the device to reload. |
| A vulnerability in the Protocol Independent Multicast Version 6 (PIM6) feature of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an authenticated, low-privileged, remote attacker to trigger a crash of the PIM6 process, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper processing of PIM6 ephemeral data queries. An attacker could exploit this vulnerability by sending a crafted ephemeral query to an affected device through one of the following methods: NX-API REST, NETCONF, RESTConf, gRPC, or Model Driven Telemetry. A successful exploit could allow the attacker to cause the PIM6 process to crash and restart, causing potential adjacency flaps and resulting in a DoS of the PIM6 and ephemeral query processes. |
| A vulnerability in the certificate processing of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper parsing of SSL/TLS certificates. An attacker could exploit this vulnerability by sending crafted DNS packets that match a static Network Address Translation (NAT) rule with DNS inspection enabled through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the implementation of the TACACS+ protocol in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to view sensitive data or bypass authentication.
This vulnerability exists because the system does not properly check whether the required TACACS+ shared secret is configured. A machine-in-the-middle attacker could exploit this vulnerability by intercepting and reading unencrypted TACACS+ messages or impersonating the TACACS+ server and falsely accepting arbitrary authentication requests. A successful exploit could allow the attacker to view sensitive information in a TACACS+ message or bypass authentication and gain access to the affected device. |
| A vulnerability in the logging feature of Cisco NX-OS Software for Cisco Nexus 3000 Series Switches, Cisco Nexus 9000 Series Switches in standalone NX-OS mode, Cisco UCS 6400 Fabric Interconnects, Cisco UCS 6500 Series Fabric Interconnects, and Cisco UCS 9108 100G Fabric Interconnects could allow an authenticated, local attacker access to sensitive information.
This vulnerability is due to improper logging of sensitive information. An attacker could exploit this vulnerability by accessing log files on the file system where they are stored. A successful exploit could allow the attacker to access sensitive information, such as stored credentials. |
| A vulnerability in the management interface access control list (ACL) processing feature in Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass configured ACLs for the SSH, NetConf, and gRPC features.
This vulnerability exists because management interface ACLs have not been supported on Cisco IOS XR Software Packet I/O infrastructure platforms for Linux-handled features such as SSH, NetConf, or gRPC. An attacker could exploit this vulnerability by attempting to send traffic to an affected device. A successful exploit could allow the attacker to bypass an ingress ACL that is applied on the management interface of the affected device. |
| A vulnerability in the installation process of Cisco IOS XR Software could allow an authenticated, local attacker to bypass Cisco IOS XR Software image signature verification and load unsigned software on an affected device. To exploit this vulnerability, the attacker must have root-system privileges on the affected device.
This vulnerability is due to incomplete validation of files during the installation of an .iso file. An attacker could exploit this vulnerability by modifying contents of the .iso image and then installing and activating it on the device. A successful exploit could allow the attacker to load an unsigned file as part of the image activation process. |
| A security vulnerability was discovered in the local status page functionality of Cisco Meraki’s MX67 and MX68 security appliance models that may allow unauthenticated individuals to access and download logs containing sensitive, privileged device information. The vulnerability is due to improper access control to the files holding debugging and maintenance information, and is only exploitable when the local status page is enabled on the device. An attacker exploiting this vulnerability may obtain access to wireless pre-shared keys, Site-to-Site VPN key and other sensitive information. Under certain circumstances, this information may allow an attacker to obtain administrative-level access to the device. |
