| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A maliciously crafted BMP file, when parsed through certain Autodesk products, can force a Untrusted Pointer Dereference vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: require source read access for duplicate extents
FSCTL_DUPLICATE_EXTENTS_TO_FILE passes the source file directly to
vfs_clone_file_range() or vfs_copy_file_range() without checking the SMB
access mask granted to the source handle. A handle opened with attribute
access can consequently be used to copy file contents into an
attacker-readable destination.
Require FILE_READ_DATA on the source handle before either VFS operation,
matching other ksmbd data-copy paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix UAF of struct file_lock in SMB2_LOCK deferred-lock cancellation
When a blocking byte-range lock request is deferred in the
FILE_LOCK_DEFERRED path, ksmbd registers the asynchronous work into
the connection's async_requests list via setup_async_work(). The cancel
callback smb2_remove_blocked_lock() holds a reference to the flock.
If the lock waiter is subsequently woken up but the work state is no
longer KSMBD_WORK_ACTIVE (e.g., due to a concurrent cancellation), the
cleanup path calls locks_free_lock(flock) without dequeuing the work from
the async_requests list. Concurrently, smb2_cancel() walks the list
under conn->request_lock and invokes the cancel callback, which then
dereferences the already freed 'flock'. This leads to a slab-use-after-free
inside __wake_up_common.
Fix this by restructuring the cleanup logic after the worker returns
from ksmbd_vfs_posix_lock_wait(). Move list_del(&smb_lock->llist) and
release_async_work(work) to the top of the cleanup block. This guarantees
that the async work is completely dequeued and serialized under
conn->request_lock before locks_free_lock(flock) is called, rendering
the flock unreachable for any concurrent smb2_cancel(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: serialize QUERY_DIRECTORY requests per file
smb2_query_dir() stores a pointer to its stack-allocated private data in
the ksmbd_file readdir_data. Concurrent QUERY_DIRECTORY requests using the
same file handle can overwrite this pointer while an iterate_dir() callback
is still using it, resulting in a stack use-after-free.
Add a per-file mutex and hold it while accessing the shared directory
enumeration state. The lock covers scan restart, dot entry state,
readdir_data setup and iteration, and response construction. This prevents
another request from replacing readdir_data.private before the current
request has finished using it and also serializes the shared file position. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: add a permission check for FSCTL_SET_ZERO_DATA
FSCTL_SET_ZERO_DATA in smb2_ioctl() destroys file data via
ksmbd_vfs_zero_data() -> vfs_fallocate(PUNCH_HOLE/ZERO_RANGE) after
checking only the share-level KSMBD_TREE_CONN_FLAG_WRITABLE, with no
per-handle access check. A handle opened with only FILE_WRITE_ATTRIBUTES
still yields an FMODE_WRITE filp (FILE_WRITE_ATTRIBUTES is part of
FILE_WRITE_DESIRE_ACCESS_LE, so smb2_create_open_flags() opens it
O_WRONLY), so the vfs_fallocate FMODE_WRITE check does not stop it; only
the missing fp->daccess gate would. Reproduced on mainline 7.1-rc7 with
KASAN by an authenticated SMB client: a FILE_WRITE_ATTRIBUTES-only handle
zeroed 4096 bytes of file data it had no FILE_WRITE_DATA right to
(6/6; a FILE_READ_DATA-only handle was correctly denied).
This is the unfixed sibling of commit cc57232cae23 ("ksmbd: fix FSCTL
permission bypass by adding a permission check for FSCTL_SET_SPARSE").
Because SET_ZERO_DATA writes data (not an attribute), require
FILE_WRITE_DATA. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: add permission checks for FSCTL_DUPLICATE_EXTENTS_TO_FILE
The FSCTL_DUPLICATE_EXTENTS_TO_FILE arm of smb2_ioctl() overwrites the
destination file's data via vfs_clone_file_range() with neither the
share-level KSMBD_TREE_CONN_FLAG_WRITABLE check nor a per-handle
fp->daccess check that the other write-bearing arms carry. A client can
overwrite destination data on a read-only share, or from a handle opened
with only FILE_WRITE_ATTRIBUTES (which still yields an FMODE_WRITE filp).
FILE_WRITE_ATTRIBUTES-only destination handle overwrote the file's data via
the clone. Add both checks, matching the FSCTL_SET_SPARSE permission fix;
require FILE_WRITE_DATA since this writes data. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: prevent path traversal bypass by restricting caseless retry
ksmbd_vfs_path_lookup() enforces LOOKUP_BENEATH to restrict path
resolution within the share root. When a crafted path attempts to
escape the share boundary using parent-directory components ('..'),
vfs_path_parent_lookup() detects this and immediately fails,
returning -EXDEV.
However, a bug exists in __ksmbd_vfs_kern_path() under caseless mode.
The function fails to intercept the -EXDEV error and erroneously
falls through to the caseless retry logic, which is intended only
for genuinely missing files. During this retry process, the path
is reconstructed, leading to an unintended LOOKUP_BENEATH bypass
that allows write-capable users to create zero-length files or
directories outside the exported share.
Fix this by ensuring that the execution only proceeds to the caseless
lookup retry when the error is specifically -ENOENT. Any other errors,
such as -EXDEV from a path traversal attempt, must be returned immediately. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: resolve SWN tcon from live registrations
cifs_swn_notify() looks up a witness registration by id under
cifs_swnreg_idr_mutex, drops the mutex, and then uses the registration's
cached tcon pointer. That pointer is not a lifetime reference, and it is
not a stable representative once cifs_get_swn_reg() lets multiple tcons
for the same net/share name share one registration id.
A same-share second mount can keep the cifs_swn_reg alive after the first
tcon unregisters and is freed. The registration then still points at the
freed first tcon, so taking tc_lock or incrementing tc_count through
swnreg->tcon only moves the use-after-free earlier. Taking tc_lock while
holding cifs_swnreg_idr_mutex also violates the documented CIFS lock
order.
Fix this by making the registration store only the stable witness
identity: id, net name, share name, and notify flags. When a notify
arrives, copy that identity under cifs_swnreg_idr_mutex, drop the mutex,
then find and pin a live witness tcon that currently matches the net/share
pair under the normal cifs_tcp_ses_lock -> tc_lock order. The notification
path uses that pinned tcon directly and drops the reference when done.
Registration and unregister messages now use the live tcon passed by the
caller instead of a cached tcon in the registration. The final unregister
send is folded into cifs_swn_unregister() while the registration is still
protected by cifs_swnreg_idr_mutex. This removes the previous
find/drop/reacquire raw-pointer window. The release path only removes the
idr entry and frees the stable identity strings.
This preserves the intended one-registration/many-tcon behavior: a
registration id represents a net/share pair, and notify handling acts on a
live representative selected at use time. It also preserves CLIENT_MOVE
ordering for the representative tcon because the old-IP unregister is sent
before cifs_swn_register() sends the new-IP register. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: validate option length before reading conf opt value
l2cap_get_conf_opt() derives the option length from the
attacker-controlled opt->len field and immediately dereferences
opt->val (as u8, get_unaligned_le16() or get_unaligned_le32(), or a
raw pointer for the default case) before any caller has confirmed
that opt->len bytes are present in the buffer. The callers
(l2cap_parse_conf_req(), l2cap_parse_conf_rsp() and
l2cap_conf_rfc_get()) only detect a malformed option afterwards, once
the running length has gone negative, by which point the
out-of-bounds read has already executed.
An existing post-hoc length check keeps the garbage value from being
consumed, so this is not a data leak in the current control flow. It
is still a validate-after-use ordering bug: up to 4 bytes are read
past the end of the buffer before it is known to contain them, and it
is fragile to future changes in the callers.
Fix it at the source. Pass the end of the buffer into
l2cap_get_conf_opt() and refuse to touch opt->val unless the full
option (header + value) fits. Each caller computes an end pointer
once before the loop and checks the return value directly instead of
inferring the error from a negative length. |
| A maliciously crafted PDF file, when parsed through Autodesk Revit, can force an Out-of-Bounds Write vulnerability. A malicious actor may leverage this vulnerability to cause a crash, cause data corruption, or execute arbitrary code in the context of the current process. |
| A vulnerability in `nltk.downloader` in nltk/nltk versions <= 3.9.4 allows for cross-package resource and model poisoning. The downloader extracts package archives into shared namespaces such as `corpora/` and `taggers/` instead of package-isolated roots, and validates package integrity only after the archive has been written and extracted. This design flaw enables one package to overwrite another package's trusted resources within the same namespace, making the changes immediately active through ordinary NLTK APIs. This issue persists across fresh interpreter restarts and can affect downstream workflows, including machine learning pipelines and reproducibility-sensitive environments. |
| A flaw was found in GDB's STABS debug format parser. The
read_member_functions() function in gdb/stabsread.c contains a linked
list removal bug in the code that separates destructor and non-destructor
member functions of C++ classes. The bug causes the destructor entries to
remain in the main function list while the list length counter is
decremented, resulting in an out-of-bounds write when the function list
is copied to its final allocated array. An attacker can craft an ELF
binary with malicious .stab and .stabstr sections that triggers this
out-of-bounds write when a user opens the file in GDB and performs any
symbol-inspection operation such as setting a breakpoint. The inferior
process does not need to be executed. Under controlled conditions, this
was demonstrated to achieve execution of arbitrary commands within the
GDB process. |
| LobeChat (LobeHub) 2.2.1 does not properly verify inbound chat-platform webhook signatures in the QQ and Feishu adapters. The webhook route (/api/agent/webhooks/:platform) is unauthenticated by design and delegates verification to each adapter; the QQ adapter performs no Ed25519 signature verification on dispatched message events, and the Feishu adapter only performs an optional static-token comparison that is skipped when no token is configured (the default) and is not a body signature. An unauthenticated attacker who knows the public webhook URL can POST forged inbound messages with an attacker-chosen sender identity and arbitrary text, causing the bot owner's agent to process attacker-controlled input and treat the attacker as a trusted platform sender. |
| ConvertX 0.17.0 contains an arbitrary file read vulnerability in the xelatex converter that allows authenticated users to read files by uploading LaTeX files with input directives. Attackers can upload .tex files containing \\input{path} or \\verbatiminput{path} directives to have the TeX engine read arbitrary files accessible to the server process and include them in downloadable PDF output. |
| Blinko 1.8.7 contains an authorization bypass (IDOR) vulnerability in multiple tRPC procedures (message.list, message.update, message.delete, message.clearAfter in server/routerTrpc/message.ts and conversation.clearMessages in server/routerTrpc/conversation.ts). Although these procedures require authentication, they query the database by caller-supplied conversation or message ID without verifying that the resource belongs to the requesting account. Any authenticated user can therefore read another user's full AI chat history, modify individual message content, and delete or wipe entire conversations by enumerating sequential integer IDs. |
| IBM Langflow OSS 1.0.0 through 1.11.2 Langflow could allow an authenticated attacker to write arbitrary files to the server due to improper input validation in the SaveToFileComponent. The application constructs local file paths using attacker‑controlled input without sufficient sanitization when handling requests to the /api/v1/run/{flow_id} endpoint. An attacker with low‑privileged authenticated access (such as a valid API key or user session) can supply crafted path values, including absolute paths or path traversal sequences, allowing arbitrary file writes to locations writable by the Langflow process. Successful exploitation may lead to unauthorized file creation or modification, potentially resulting in further compromise depending on the deployment environment. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: avoid NULL deref of conn in iso_conn_big_sync()
iso_conn_big_sync() drops the socket lock to call hci_get_route() and
then re-acquires it, but dereferences iso_pi(sk)->conn->hcon afterwards
without re-checking that conn is still valid.
While the lock is dropped, the connection can be torn down under the
same socket lock: iso_disconn_cfm() -> iso_conn_del() -> iso_chan_del()
sets iso_pi(sk)->conn to NULL (and the broadcast teardown path can also
clear conn->hcon on its own). When iso_conn_big_sync() re-acquires the
lock and reads conn->hcon, conn may be NULL, causing a NULL pointer
dereference (hcon is the first member of struct iso_conn).
This path is reached from iso_sock_recvmsg() for a PA-sync broadcast
sink socket (BT_SK_DEFER_SETUP | BT_SK_PA_SYNC), so the dropped-lock
window can race with connection teardown driven by controller events.
Re-validate iso_pi(sk)->conn and its hcon after re-acquiring the socket
lock and bail out if the connection went away, as already done in the
sibling iso_sock_rebind_bc(). |
| IBM Langflow OSS 1.0.0 through 1.11.2 allows remote authenticated attackers to bypass localhost-only MCP configuration installation by spoofing X-Forwarded-For: 127.0.0.1 header, enabling arbitrary writes to IDE config files (~/.cursor/mcp.json, etc.). |
| IBM Netezza Software 11.3.0.3 through Interim Fix 002 has operations that are performed without validating bucket ownership using the ExpectedBucketOwner parameter. This omission may allow a remote attacker to exploit misconfigurations or naming collisions to redirect application requests to an unintended S3 bucket under their control. |
| Openpanel before 2.3.0 contains an unauthenticated full-read server-side request forgery (SSRF) vulnerability in the GET /tools/site-checker endpoint (apps/api/src/controllers/tools.controller.ts). The endpoint passes a user-supplied url query parameter to fetchWithRedirects() and performs server-side HTTP requests to arbitrary URLs without any SSRF/IP validation. An unauthenticated remote attacker can access cloud instance metadata endpoints, probe internal services, scan internal network ports, and read returned content (status code, page size, timing, and parsed HTML metadata), and leak internal IP addresses (via getIPInfo() to a third party). |
